sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
27,937 Commits 1 Branch 0 Tags 291 MiB
be5ba90d4f
Commit Graph

9649 Commits

Author SHA1 Message Date
Gregory Nutt
76788040d5 ESP32: Add esp32_config.h 2016-10-26 15:45:03 -06:00
David Sidrane
314dd62dd5 stm32f76xx77xx_pinmap.h Missed one 2016-10-26 21:10:59 +00:00
David Sidrane
0bab23fb1b stm32_i2c.c Dejavu 2016-10-26 21:00:50 +00:00
Gregory Nutt
6acc831e77 Remove duplicate select from Kconfig 2016-10-26 07:00:24 -06:00
Sebastien Lorquet
f24701f5c7 Merge branch 'master' into stm32l4_pinouts 2016-10-26 13:31:54 +02:00
Sebastien Lorquet
68dae715b0 CHxN channels are always outputs 2016-10-26 13:21:57 +02:00
Marc Rechte
483f012600 Initial implemention of the STM32 F37xx SDADC module. There are also changes to ADC, DAC modules. SDADC has only been tested in DMA mode and does not support external TIMER triggers. This is a work in progress. 2016-10-25 14:14:10 -06:00
Gregory Nutt
04c6319e32 Merged in slorquet/nuttx/stm32l4_uarts (pull request #155) 
Enable and renames for 32l4 UARTs 4 and 5
 2016-10-25 13:09:17 +00:00
Sebastien Lorquet
27920eeae9 Enable and renames for 32l4 UARTs 4 and 5 2016-10-25 10:55:25 +02:00
Sebastien Lorquet
9be23d0c76 Fix i2c devices rcc registers 2016-10-25 10:53:24 +02:00
Max Kriegleder
1d50259358 STM32 F4 I2c: A new implementation of the STM32 F4 I2C bottom half. The commin I2C as this did not handled correctly in the current implementation (see also https://github.com/PX4/NuttX/issues/54). The changes almost exclusively affect the ISR. 2016-10-24 16:32:10 -06:00
Frank Benkert
cf5fdf1f8f SAM Watchdog: Register the watchdog device at the configured device path CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt 2016-10-21 07:09:20 -06:00
Gregory Nutt
5d56172f82 Merged in w8jcik/nuttx (pull request #152) 
add tim8 to stm32f103v pinmap
 2016-10-19 16:03:34 +00:00
Gregory Nutt
841e1aa77f Fix a cloned typo 2016-10-19 09:14:21 -06:00
Maciej Wójcik
c719a32a40 add tim8 to stm32f103v pinmap 2016-10-19 16:34:07 +02:00
David Sidrane
c3543cf402 Kinetis:BugFix:i2c driver offset swapped for value in kinetis_i2c_putreg 2016-10-18 12:00:01 -10:00
David Sidrane
b29b2874fe Kinetis Allow CONFIG_ARMV7M_CMNVECTOR, CONFIG_STACK_COLORATION, CONFIG_ARCH_FPU 2016-10-18 12:00:01 -10:00
David Sidrane
bce382da52 Kinetis Support ARMV7 Common Vector and FPU 2016-10-18 12:00:01 -10:00
David Sidrane
4de46c848d Broke out DMA to use the modern Nuttx chip inclusion - still STUBS 2016-10-18 12:00:01 -10:00
David Sidrane
42ac6ecebd Kinetis broke out SPI to kinetis/kinetis_spi.h 2016-10-18 12:00:01 -10:00
David Sidrane
70d5c7753e Kinetis - Added missing headers 2016-10-18 12:00:01 -10:00
Gregory Nutt
30598c005f Cosmetic changes from review of last PR 2016-10-15 08:56:11 -06:00
David Sidrane
909ea5e8ef F4 Support versampling by 8 2016-10-15 03:56:07 -10:00
Gregory Nutt
5b46ce4889 Cosmetic changes from review of last PR 2016-10-14 17:39:21 -06:00
Gregory Nutt
f2ebb6d2a0 Merged in neilh20/anuttx/pr_K64_uid (pull request #147) 
Add Kinetis freedom-k64f uid
 2016-10-14 23:29:19 +00:00
Gregory Nutt
ad6856c931 Trivial stylistic changes from review of last PR 2016-10-14 11:12:49 -06:00
Sebastien Lorquet
fb1f424e12 Support Complementary PWM outputs on STM32L4 2016-10-14 18:06:11 +02:00
Sebastien Lorquet
f7e0a36f55 Multiple stm32l4 timer fixes: 
- too many parentheses when calculating max chan count (???)
- channel 4 does not have a complementary output
 2016-10-14 12:50:45 +02:00
neilh10
6dca9a4390 Add UID Unique ID 2016-10-13 19:50:35 -07:00
neilh10
64b020f1a8 Add UID Unique ID 2016-10-13 19:42:39 -07:00
Gregory Nutt
0bc19a63bb Merged in david_s5/nuttx-5/david_s5/kinetish-edited-online-with-bitbucket-1476115086140 (pull request #144) 
kinetis.h edited online with Bitbucket
 2016-10-10 10:04:04 -06:00
David Sidrane
0476c43748 kinetis.h edited online with Bitbucket 2016-10-10 15:58:21 +00:00
David Sidrane
4703a23171 kinetis.h edited online with Bitbucket 2016-10-10 15:56:02 +00:00
Lok Tep
9e3479555d usb set value typo 2016-10-07 15:47:30 +02:00
Lok Tep
fd92f01f55 exact values for i2c clock 2016-10-07 15:12:46 +02:00
Lok Tep
a2e4c0e898 i2s rcc typo fix 2016-10-07 15:12:34 +02:00
Jens Gräf
1d3abd17cc dma2d: fix an error in up_dma2dcreatelayer where an invalid pointer was returned when a certain underlying function failed. 2016-10-07 13:42:24 +02:00
Gregory Nutt
d61239e38f stm32_modifycr2 should be available on all platforms is DMA is enabled. 2016-10-06 08:50:52 -06:00
David Sidrane
d4a8585d6f Fixed L4 USB Driver by avoiding SETUPDONE and EPOUT_SETUP 2016-10-04 16:52:12 -10:00
David Sidrane
a416b304a3 Code Cleanup and conform to upstrem debug config 2016-10-04 16:51:47 -10:00
David Sidrane
e54a0cd3d0 Header cleanup 2016-10-04 16:51:32 -10:00
Sebastien Lorquet
9dcecd4b15 Add support for qencoders on various nucleo boards 2016-10-03 16:07:20 +02:00
Gregory Nutt
06c70129ed STM32L4: Remove dependencies on STM32 F3 from Kconfig 2016-10-02 16:05:13 -06:00
Sebastien Lorquet
d5ef349d9a Add support for quadrature encoders on STM32L4 2016-10-02 23:26:16 +02:00
Lok Tep
33cea5038f memory corruption, typo addr-value 2016-10-01 19:38:43 +02:00
Neil Hancock
ef475eb6a9 STM32 Ethernet: Correct typo in conditional logic 2016-10-01 07:32:41 -06:00
Vytautas Lukenskas
fd1de92016 There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas. 2016-09-30 08:51:49 -06:00
Lok Tep
1cbd7a0e59 CONFIG_ARCH_IRQPRIO check 2016-09-30 16:00:18 +02:00
Lok Tep
7d7354f961 merge 2016-09-27 16:05:57 +02:00
Young
7f32019a76 Add a new ioctl command (set MAXPOS) for tiva QEI 2016-09-26 18:10:06 +08:00
Mateusz Szafoni
9742757f26 Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present in RMII 2016-09-22 10:05:45 +02:00
Gregory Nutt
d2e03daeb1 Fix some strange spacing apparently introduced by tools/indent.sh 2016-09-21 16:06:05 -06:00
Gregory Nutt
54eee5b303 Review of PR 135 2016-09-21 09:36:39 -06:00
Young
cf99e50b7a Add QEI lower-half driver impl. for Tiva series chip 2016-09-21 17:08:31 +08:00
Gregory Nutt
1c20376e39 SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7 2016-09-20 15:33:31 -06:00
Wolfgang Reißnegger
3f22b63321 SAM3/4: Fix GPIO pull-up/down code. 
Enabling the pull-down resistor while the pull-up resistor is still enabled
is not possible. In this case, the write of PIO_PPDER for the relevant I/O
line is discarded. Likewise, enabling the pull-up resistor while the
pull-down resistor is still enabled is not possible. In this case, the
write of PIO_PUER for the relevant I/O line is discarded.
 2016-09-20 13:32:04 -07:00
Gregory Nutt
ed22c93d7a Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y 2016-09-20 13:02:24 -06:00
Gregory Nutt
4dc3521743 All SAM Ethernet Drivers: Add support so that the drivers can be built with CONFIG_NET_MULTIBUFFER=y 2016-09-20 08:56:36 -06:00
Gregory Nutt
7f1a88e243 Pierre's assertion-avoidance change should also be applied to STM32 F7 and L4 2016-09-15 08:41:49 -06:00
Pierre-noel Bouteville
829de7d5bd Set USB address to avoid a failed assertion 2016-09-15 08:36:45 -06:00
Jim Wylder
5d73f114b5 STM32L4: Add support for USART3-USART5 
For STM32L4 parts, the higher number USART ports supported
varies.  Add the HAVE_USARTx definitions to the configuration
to allow enabling the higher numbered USART ports.

Signed-off-by: Jim Wylder <jwylder@motorola.com>
 2016-09-14 15:20:18 -05:00
Sebastien Lorquet
50dd745e23 restore stm32l4 name 2016-09-07 14:17:38 +02:00
Sebastien Lorquet
87d2f86968 Register renames to allow stm32l4 usb device compilation 2016-09-05 08:50:09 +02:00
David Sidrane
944902a24d F7 Usb Fix for FIFO loosing first word 2016-09-02 07:14:16 -10:00
David Sidrane
81ba54b650 Using uinfo 2016-09-02 03:50:26 -10:00
Sebastien Lorquet
e4a713477a Apply stm32 fix to stm32l4 2016-08-31 13:12:49 +02:00
Gregory Nutt
bef7f5be23 STM32 F7: Remove duplicate call to pkt_input from Ethernet driver. 2016-08-30 08:04:18 -06:00
Gregory Nutt
9c3bade7b4 net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck. 2016-08-30 07:59:57 -06:00
David Sidrane
f2809d52d3 stm32_otgfsdev.c edited online with Bitbucket 
dup SOF removed as noted by Sébastien Lorquet
 2016-08-26 17:20:38 +00:00
David Sidrane
87f4a8033a BugFix:Lost first word from FIFO 
1) Do not overwrite Reserved Bits in GINTSTS (per ref manual)*
    2) Acknowledge all pending int on entry to ISR that are Only rc_w1*
    3) Do not disable RXFVL*
    4) Loop until RXFVL is cleared*
    5) Only clear the NAK on the endpoint on the OTGFS_GRXSTSD_PKTSTS_SETUPDONE to
       not loose the first WORD of FIFO all the data  (Bug Fix)

Changed marked *are just driver clean up and ensure ints are not lost.
The bug fix is #5

Test case open putty and observer the Set/Get LineCoding
Without this fix #5 the Get will not match the Set, and
infact the data might be skewed by 4 bytes, that are lost
from the FIFO if the OTGFS_DOEPCTL0_CNAK bit is set in the
OTGFS_GRXSTSD_PKTSTS_SETUPRECVD as opposed to the OTGFS_GRXSTSD_PKTSTS_SETUPDONE

Set Line Coding DATA1: 4B | 00 c2 01 00 00 00 08 | c8 1B
Get Line Coding DATA1: 4B | .. .. .. .. 00 00 08   c8 .. 00 00 07 | 7a 72
 2016-08-25 06:51:52 -10:00
Gregory Nutt
4ebace37a9 Fix typos in LPC43 serial driver. Found by Vytautas Lukenskas 2016-08-24 10:34:56 -06:00
Aleksandr Vyhovanec
6bc952a2cc STM32: Add IAR-style STM32F1xx vectors. Tested on STM32F103RB and STM32F107RC. 2016-08-24 10:10:33 -06:00
Gregory Nutt
ae37c9859f Cosmetic changes from review of PR 120 2016-08-19 06:32:28 -06:00
Michał Łyszczek
0f175039ad Fix compilation warnings for stm32 eth with certain configs 2016-08-19 09:18:18 +02:00
Gregory Nutt
c0074fd6b8 Merged in mlyszczek/nuttx/stm32butterfly2_board (pull request #118) 
add stm32butterfly2 development board
 2016-08-18 11:14:10 -06:00
Alan Carvalho de Assis
a3e1bdde14 STM32 SPI: Fix STM32F3XXX SPI driver to read 8-bit correctly. 2016-08-18 08:38:49 -06:00
Gregory Nutt
3c58e8e9b4 SAMA5: Add oneshot max_delay method 2016-08-18 08:11:40 -06:00
Gregory Nutt
d369eeec95 Remove a misleading comment 2016-08-18 07:13:04 -06:00
Gregory Nutt
01ae660c6c Merged in K-man23/nuttx/stm32_adc_fix (pull request #117) 
Change stm32 adc dma callback to send channel number instead of index
 2016-08-17 14:05:37 -06:00
Konstantin Berezenko
9b3bbc0f09 Change stm32 adc dma callback to send channel number instead of index 2016-08-17 13:02:36 -07:00
Gregory Nutt
319ad528cd Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error." 
This reverts commit 5d5851a5cd.
 2016-08-17 12:34:54 -06:00
Michał Łyszczek
a05d9c18da Add connectivity line stm32 to be able to compile SYSCFG, add definitions for 
usb clock divs
 2016-08-17 20:11:15 +02:00
Konstantin Berezenko
42ee88fe89 STM32F411 and STM32F446 map i2c2_sda_4 to different alternate function numbers 2016-08-17 11:01:44 -07:00
Piotr Mienkowski
5d5851a5cd sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error. 2016-08-17 09:51:54 -06:00
Gregory Nutt
17e5da96ea SAMV7: DAC1 not available GMAC is enabled 2016-08-17 07:14:59 -06:00
Gregory Nutt
e57891b41f Kinetis I2C: Review and extend I2C register definitions for K40 and K60 2016-08-16 12:17:23 -06:00
Gregory Nutt
a337494221 Kinetis I2C: Remove literal hex register values. Replace with symbolic definitions from kinetis_i2c.h 2016-08-16 11:44:04 -06:00
Gregory Nutt
7f4488dc80 Review I2C register definitions and add support for the K64 2016-08-16 10:18:52 -06:00
Gregory Nutt
a3b061e54f Kinetis: Add support for I2C2 2016-08-16 10:02:28 -06:00
Gregory Nutt
be83e73957 Kinetis I2C: Add comments, DEBUGASSERTions, and some I2C debug output. 2016-08-16 08:42:30 -06:00
Gregory Nutt
32c1189f51 Re-order some fields so that the structure packs better and so is smaller. 2016-08-16 08:20:55 -06:00
Gregory Nutt
f40bb14495 Kinetis: Add support for I2C1 2016-08-16 07:21:03 -06:00
Gregory Nutt
3f48392974 Add defaults in SAMV7 configuration for all DAC settings 2016-08-15 10:22:12 -06:00
Gregory Nutt
e53118ffc2 SAMV7 DAC configuration needs some conditional logic 2016-08-15 08:55:11 -06:00
Gregory Nutt
c367e4985f Add configuration logic for the SAMV7 DAC module 2016-08-15 08:21:46 -06:00
Piotr Mienkowski
053aea552f Add support for SAMV7 DACC module 2016-08-15 08:00:36 -06:00
Gregory Nutt
f84780f36e Changes from review of PR 114 2016-08-14 13:38:47 -06:00
Gregory Nutt
2b32869b49 Merged in v01d/nuttx/kinetis-i2c-norestart (pull request #114) 
support NORESTART on kinetis i2c
 2016-08-14 13:27:39 -06:00
v01d
239c56f3b9 support NORESTART 2016-08-14 16:25:18 -03:00
Gregory Nutt
014b8268cc Minor stylistic corrections 2016-08-14 10:14:28 -06:00
Gregory Nutt
45e71a140a Fix some alignment and long line issues 2016-08-13 18:04:09 -06:00
Gregory Nutt
3023724cf2 Changes from review of PR 113 2016-08-13 17:32:35 -06:00
Gregory Nutt
8315b051ca Merged in v01d/nuttx/kinetis_i2c (pull request #113) 
I2C and RTC support for Kinetis
 2016-08-13 16:54:14 -06:00
Gregory Nutt
8052dc4955 STM32 SPI: nbits should be unsigned. Valid range is 4-16 for F3 and L4. 8 or 16 for others. 2016-08-13 16:01:50 -06:00
v01d
5a97def131 kinetis k20 i2c fixed 2016-08-13 18:48:45 -03:00
Gregory Nutt
1a10518dae Update ChangeLog 2016-08-13 12:03:12 -06:00
Gregory Nutt
eed5e41626 Add some comments 2016-08-13 10:24:40 -06:00
Gregory Nutt
172761163b STM32F3 SPI: Cannot write 16-bit value to DR register because of how the F3 implements data packing. 2016-08-13 10:11:23 -06:00
Gregory Nutt
51fcd89b98 Add and fix some SPI debug output 2016-08-13 08:31:37 -06:00
Gregory Nutt
42202c6365 STM32 and STM32L4: Enabling DMA loses other bits in CR2 2016-08-13 08:01:41 -06:00
Gregory Nutt
efc9f674d2 Trivial changes to comments and spacing 2016-08-13 07:50:54 -06:00
Alan Carvalho de Assis
805cb5c752 STM32F3 SPI: Fix a typo 2016-08-13 07:23:48 -06:00
Gregory Nutt
da5563c0e7 STM32: Add conditional logic for STM32F37xx 2016-08-13 06:43:13 -06:00
Gregory Nutt
10f90a1738 STM32 F3: Fix more SPI issues 2016-08-12 19:00:34 -06:00
Gregory Nutt
3383a25c38 Some logic missing from last commit 2016-08-12 18:40:25 -06:00
Gregory Nutt
afb02b56d4 STM32F3 SPI: Fix the number of bit setting for the F3. It works differently than for other parts. 2016-08-12 18:32:37 -06:00
Gregory Nutt
046acf6b54 Add a simulated oneshot lowerhalf driver 2016-08-12 13:14:03 -06:00
Gregory Nutt
b4e8876b09 Correct some spacing 2016-08-12 12:41:49 -06:00
Gregory Nutt
82b86cdcf3 oneshot interface: max_delay method should return time in a standard struct timespec form. 2016-08-12 11:33:10 -06:00
Gregory Nutt
89135c55e4 drivers/timer: Add an upper-half, oneshot timer character driver. 2016-08-12 10:40:07 -06:00
Gregory Nutt
61b0ac06bf Missed a dependency in last set of commits 2016-08-11 17:20:12 -06:00
Gregory Nutt
1965e25da4 STM32L4: Add oneshot lower half driver. 2016-08-11 17:14:41 -06:00
Gregory Nutt
a5a776e223 SAM4CM: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 17:04:19 -06:00
Gregory Nutt
fa6866b046 SAMA5: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 16:47:17 -06:00
Gregory Nutt
b4d4a74059 SAMV7: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver. 2016-08-11 16:27:01 -06:00
Gregory Nutt
d0ce5b1d1e Cosmetic changes to comments and function prototypes 2016-08-11 15:15:37 -06:00
Gregory Nutt
fb349508fd STM32 oneshot lower-half: Missed some data initialization. 2016-08-11 14:57:17 -06:00
Gregory Nutt
eb3a565153 STM32: Add oneshot lower half to build system. Fix some build problems. 2016-08-11 14:53:39 -06:00
Gregory Nutt
1bb93021df STM32: Add a experimental oneshot, lower-half driver for STM32 2016-08-11 14:07:43 -06:00
Gregory Nutt
0e35bad987 Update some comments 2016-08-11 10:12:04 -06:00
Gregory Nutt
accbccd78a Merged in mlyszczek/nuttx/stm32f1connline_pllfix (pull request #111) 
Fix bad pllmul values for stm32f1xx connectivity line.
 2016-08-11 06:44:19 -06:00
Michał Łyszczek
81df56086a Fix bad pllmul values for stm32f1xx connectivity line. 
stm32f1xx connectivity line supports only x4, x5, x6, x7, x8, x9 and x6.5 values
 2016-08-11 10:49:57 +02:00
Young
e30a3b780c Fix two bugs of tiva pwm lower-half driver impl. 2016-08-10 13:25:43 +08:00
Gregory Nutt
7823a1680e Update a comment 2016-08-09 17:08:03 -06:00
Gregory Nutt
698d6d1294 SAM3/4: Extend clocking logic to enable clocking on ports D-F 2016-08-09 17:05:11 -06:00
Gregory Nutt
0918dd98ab Merged in gnagflow/nuttx (pull request #109) 
SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is configured as input.
 2016-08-09 16:40:48 -06:00
Gregory Nutt
fdcf0f7e5f Correct some comments 2016-08-09 15:15:21 -06:00
Wolfgang Reissnegger
cf35bb0b18 SAM3/4 GPIO: Enable peripheral clock for GPIO port when GPIO is configured as input. 
The value of a GPIO input is only sampled when the peripheral clock for
the port controller the GPIO resides in is enabled. Therefore we need
to enable the clock even when polling a GPIO.
 2016-08-09 13:23:05 -07:00
Gregory Nutt
b5b7a21bb6 Make reference count a uin16_t and save a couple of bytes. 2016-08-09 13:54:57 -06:00
Gregory Nutt
8b5833f7fe A consequence of Max's change to the logic to enable access to the backup domain is that every call to enabledbkp(true) must be followed by a matching call to enablebkp(false). There was one cse in both RTCC drivers where that may not always be true. 2016-08-09 11:33:47 -06:00
v01d
f715e9b787 RTC working, I2C in progress 2016-08-09 14:01:27 -03:00
Gregory Nutt
5d91b8cabb With last change, stm32_pwr_enablebkp() no longer returns a value 2016-08-09 07:50:31 -06:00
Max Neklyudov
1e3ccbac12 Make stm32_pwr_enablebkp thread safe 2016-08-09 07:36:13 -06:00
Alan Carvalho de Assis
8499f42bf9 Add STM32F37XX DMA channel configuration 2016-08-08 13:29:53 -06:00
Alan Carvalho de Assis
fcf1ae7e05 stm32f37xx: Fix SYSCFG_EXTICR_PORTE defined twice 2016-08-08 12:59:29 -06:00
Alan Carvalho de Assis
834f058573 I'm using NuttX on STM32F373 and saw the config was missing SPI2 and 
SPI3, see datasheet:
www.st.com/resource/en/datasheet/stm32f373cc.pdf

I searched for other members of STM32F37XX family and they also have 3 SPIs:
http://www.st.com/content/st_com/en/search.html#q=STM32F37-t=keywords-page=1
 2016-08-08 12:25:15 -06:00
Gregory Nutt
6df28bc74e Make bit-order SPI H/W feature configurable for better error detection 2016-08-08 11:54:13 -06:00
Gregory Nutt
c3cfd37791 Fix cloned variable error in all SPI drivers 2016-08-08 11:04:01 -06:00
Gregory Nutt
2ae3953f9e STM32/EFM32: If any hardware feature other and LSBFIRST is selected, return -ENOSYS. 2016-08-08 10:37:28 -06:00
Gregory Nutt
7d4cb73bd6 STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers. 
This change three things:  (1) It adds HWFEAT_LSBFIRST as a new H/W feature.  (2) It changes the implementations of SPI_SETBITS in the STM32 and EFM32 derivers so that negated bit numbers are simply errors and it adds the SPI_HWFEATURES method that can set the LSB bit order, and (3) It changes all calls with negative number of bits from all drivers: The number of bits is now always positive and SPI_HWFEATUREs is called with HWFEAT_LSBFIRST to set the bit order.
 2016-08-08 08:28:13 -06:00
v01d
d483f7939f I2C0 support for kinetis/teensy-3.x (to be tested) 2016-08-06 22:23:59 -03:00
Gregory Nutt
56f2454c86 Fix names of pre-processor variables used in header file idempotence 2016-08-06 18:48:45 -06:00
Gregory Nutt
f5ae207516 Changes from Review of last PR adding Tiva PWM driver 2016-08-05 07:17:42 -06:00
Young
2994decd3c Add tiva PWM lower-half driver implementation 2016-08-05 18:53:25 +08:00
Gregory Nutt
d9314c1034 LPC43xx ADC: board.h should be included last; Also, unreleated, update tools/README.txt 2016-07-30 07:05:10 -06:00
Gregory Nutt
309480d0f9 Merge branch 'timekeeping' of bitbucket.org:nuttx/nuttx 2016-07-28 09:34:00 -06:00
Gregory Nutt
59f626313d Changes from review of last PR 2016-07-25 15:16:51 -06:00
Gregory Nutt
250b9d5597 Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106) 
Pwm_driver
 2016-07-25 14:59:45 -06:00
jmacintyre
f5ea811c97 create PWM driver, still having issues with building 2016-07-25 14:17:07 -05:00
Stefan Kolb
899a8aa2f0 SAMV7 TRNG: Missing endif. 2016-07-25 12:30:39 -06:00
Gregory Nutt
e895e19b9f Minor changes from review of last PR 2016-07-24 07:45:46 -06:00
Wolfgang Reissnegger
c0fa319f2b SAM3/4 UDP: Fix handling of endpoint RX FIFO banks. 
This fixes a race condition where the HW fills a FIFO bank while the SW is
busy, resulting in out of sequence USB packets.
 2016-07-23 20:11:04 -07:00
Wolfgang Reissnegger
cc191a977d SAM3/4 UDP: Remove redundant EP state assignment. 2016-07-23 20:11:03 -07:00
Wolfgang Reissnegger
f3a6a40f62 SAM3/4 Serial: Fix warning when CONFIG_SUPPRESS_UART_CONFIG is set. 2016-07-23 16:23:49 -07:00
Gregory Nutt
9b9b721406 Rename alarm_enable to rtc_alarm_enabled; mark inline 2016-07-23 12:01:57 -06:00
Gregory Nutt
5a0f9fcb7d Fix STM32 RTC Alarm interrupts. They were being enabled BEFORE the interrupt system was being initialized. 2016-07-23 10:36:06 -06:00
Gregory Nutt
14de4b99f8 Simplify some computations 2016-07-23 08:13:25 -06:00
Gregory Nutt
0984fcda44 Back out last RTC alarm changes. I am mistaken, the interrupts are enabled by stm32[l4]_exti_alarm(). 2016-07-23 07:53:08 -06:00
Gregory Nutt
65ac11692d STM32L4 RTC is cloned from F4; needs same fix. 2016-07-23 07:33:44 -06:00
Gregory Nutt
829c5610da STM32 F4 RTC ALARM: Was not enabling interrupts. 2016-07-23 07:19:14 -06:00
Gregory Nutt
3aea9b8bf3 Rename KL version of CONFIG_GPIO_IRQ to CONFIG_KL_GPIOIRQ 2016-07-22 14:34:21 -06:00
Gregory Nutt
5386403476 Rename Kinetis version of CONFIG_GPIO_IRQ to CONFIG_KINETIS_GPIOIRQ 2016-07-22 14:30:37 -06:00
Gregory Nutt
264578135d Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ 2016-07-22 14:23:31 -06:00
Gregory Nutt
360efe03c1 Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ 2016-07-22 14:18:30 -06:00
Gregory Nutt
369c942605 uint8_t is big enough for global. Range of values only 2-10 2016-07-21 15:18:27 -06:00
Gregory Nutt
67900beaaa LP43 Heap: REALLY eliminate the warning this time 2016-07-21 15:15:56 -06:00
Gregory Nutt
d5acc120a4 Kinetis K60: Fix some bad conditional compilation 2016-07-21 14:22:00 -06:00
Gregory Nutt
a2035f7efd Move include/nuttx/1wire.h to include/nuttx/drivers/1wire.h 2016-07-21 13:51:28 -06:00
Gregory Nutt
96d5b734a8 Add missing TWI definitions 2016-07-21 08:01:59 -06:00
Gregory Nutt
0d98507af1 Eliminate a warning 2016-07-20 16:47:23 -06:00
Gregory Nutt
1b9b3a7b47 pwm.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:48:24 -06:00
Gregory Nutt
ddcaa3d425 can.h moved from include/nuttx/ to include/nuttx/drivers. 2016-07-20 13:38:36 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Sagitta Li
e07bd757ba STM32 F107: TIM8 not supported in F105/F107 2016-07-20 08:51:03 -06:00
Vytautas Lukenskas
ac2a5e079c Add change missing in Make.defs for last LPC43xx change 2016-07-19 09:28:15 -06:00
Vytautas Lukenskas
f222d37aa7 Extend LPC43xx EMC code to support SDRAM on a dynamic memory interface. 2016-07-19 07:11:04 -06:00
Gregory Nutt
2119c5ce19 Fix another function naming error 2016-07-18 12:40:27 -06:00
Gregory Nutt
d36da2b560 Fix bad dev[u]random_register() function return value. 2016-07-18 12:25:05 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
078bbe5e5c All H/W RNG Drivers: Can now be configured to register as /dev/random and/or /dev/urandom 2016-07-18 11:10:37 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Young
7005fafb95 Fix a bug of tiva i2c ports configuration 2016-07-15 11:03:48 +08:00
Gregory Nutt
18059d6821 Restore Wolfgang Reissnegger's PR as submitted. My mistake is it late here. 2016-07-14 18:39:51 -06:00
Wolfgang Reissnegger
f982180ec7 SAM3/4 Timer: Remove broken definitions for BMR register. 
Per documentation SAM4S and SAM4E have the BMR register values
as they are already defined. No need for chip specific values.

In addition:
 - CONFIG_ARCH_CHIP_SAM4s has wrong lower case 's' so the definitions would
   not be used anyways for SAM4S builds.
 - TC_BMR_TC2XC2S_TIOA2 does not make sense. There is no way to loop back
   TC2's TIOA2 into itself.
 2016-07-14 18:17:05 -06:00
Gregory Nutt
54bc6c88dd Fix cast of return value 2016-07-14 10:21:31 -06:00
Gregory Nutt
3f6835fda9 If CONFIG_SPIFI_SECTOR512 undefined, lpc43_bwrite doesn't do actual write (probably copy/paste errors). Still not sure about current state of lpc43_spifi implementation, but for me NXFFS works with this patch. From Vytautas Lukenskas. 2016-07-14 10:11:19 -06:00
Pierre-noel Bouteville
76f12b1f69 I'm using syslog through ITM. In this case syslog_channel function is call before ram initialisation in stm32_clockconfig. But syslog channel uses a global variable that is reset to default by the RAM initialization. 2016-07-14 07:29:39 -06:00
Gregory Nutt
72582b61d9 Merged in ziggurat29/nuttx/stm32l4_smartfs_test (pull request #98) 
port foward bugfix from stm32 of oneshot timer
 2016-07-13 16:09:18 -06:00
ziggurat29
9a6c5b271a port foward bugfix from stm32 of oneshot timer 2016-07-13 17:00:06 -05:00
Gregory Nutt
37e10a54ae Kinetis: Eliminate a warning. Freedom-K64F: Update a README file 2016-07-13 15:38:47 -06:00
Gregory Nutt
beaca7a17f Merge remote-tracking branch 'origin/master' into timekeeping 2016-07-13 10:22:38 -06:00
Max Neklyudov
067f63fc18 STM32: Fix bug in oneshot timer 2016-07-13 10:20:38 -06:00
Stefan Kolb
f673b2d02a This commit solves a problem which causes data loss while sending data via USB. This problem is caused by an incorrect handling of the endpoint state in the USB driver sam_usbdevhs. This leads under some circumstances to situations in which an DMA transfer is setup while a previous DMA transfer is currently active. Amongst other things I introduced the new endpoint state USBHS_EPSTATE_SENDING_DMA for the fix. 
To reproduce the problem, I used a program which send as many data as possible via a CDC/ACM device and verified the received data on the PC.
 2016-07-13 10:09:14 -06:00
Gregory Nutt
a7d8279714 Kinetis and Freedom-K64F: Remove unused configuration variable; fix some compile issues; SDHC is now enabled in the nsh configuration (but does not work) 2016-07-13 09:56:02 -06:00
Gregory Nutt
2f12de6f28 Freedom-K64F: Add hooks for automounter; Change NSH configuration to use Windows 2016-07-13 09:23:57 -06:00
Sebastien Lorquet
590af73bd2 STM32L4 Serial: Remove some STM32Fxxx conditional logic; fix a link error resulting from an over-aggressive rename. 2016-07-13 07:10:09 -06:00
Gregory Nutt
76a0cccbb1 K6x Ethernet: Fix some conditional logic 2016-07-13 07:04:19 -06:00
Sebastien Lorquet
6be72272eb STM32L4: Apply the stm32l4 namespace and FAR qualifiers to the serial driver, also, indentation. 2016-07-12 17:18:46 -06:00
Gregory Nutt
dee77a5dd9 Kinetis Ethernet: Add support for CONFIG_NET_NOINTS 2016-07-12 16:17:35 -06:00
Gregory Nutt
10667bd38a Kinetis Ethernet and Freedcom-K64F: PHY address was wrong. Modified driver to try all PHY addresses and then only fail if the driver cannot find a usable PHY address. MDIO pin must have an internal pull-up on the Freedom-K64F. 2016-07-12 14:09:27 -06:00
Gregory Nutt
c8f053de92 Kinetis Ethernet: Add support for the KSZ8081 PHY 2016-07-12 09:59:08 -06:00
Gregory Nutt
38999dfe9d Fix two incorrectly named header files 2016-07-12 09:46:31 -06:00
Gregory Nutt
f816e7a69b Merged in slorquet/nuttx/pr_fixes (pull request #95) 
Pr_fixes
 2016-07-11 17:07:40 -06:00
Sebastien Lorquet
4172016667 revert changes made by greg 2016-07-12 01:04:15 +02:00
Sebastien Lorquet
5e12d6203e Cosmetic changes after PR 94 2016-07-12 00:57:18 +02:00
Gregory Nutt
9dd70ffbae Freedom K64F: Green and Blue LEDs reversed 2016-07-11 16:54:20 -06:00
Gregory Nutt
c80b627e8d Partial review of last PR 2016-07-11 16:28:54 -06:00
Sebastien Lorquet
749b54fbda PR fixes for oneshoot and freerun 2016-07-12 00:16:08 +02:00
Gregory Nutt
a48fb1e41c Merged in slorquet/nuttx/stm32l4_renames (pull request #94) 
stm32l4_renames
 2016-07-11 16:05:27 -06:00
Sebastien Lorquet
4f5d22c940 fix a typo 2016-07-12 00:03:38 +02:00
Sebastien Lorquet
3a873a44ef renames in USB OTG 2016-07-11 23:59:24 +02:00
Sebastien Lorquet
4dd020784a renames in tickless 2016-07-11 23:57:57 +02:00
Gregory Nutt
fb1855244e STM32 timer: Eliminate a warning 2016-07-11 13:13:17 -06:00
Sebastien Lorquet
ce09af0da7 Rename STM32L4 PWM routines. this WILL BREAK configs 2016-07-11 19:13:06 +02:00
Sebastien Lorquet
d347d7ce7e renames in oneshoot 2016-07-11 19:06:14 +02:00
Sebastien Lorquet
34a7b0ea8e Renames stm32_ -> stm32l4_ on old files and rtcc/basic timers 2016-07-11 19:05:09 +02:00
Gregory Nutt
246773faa7 Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name. 2016-07-11 06:54:02 -06:00
Max Neklyudov
8db29071da timekeeping: initial implementation 2016-07-10 16:14:25 -06:00
Wolfgang Reissnegger
d89e062c06 SAM3/4 I2C: Fix reversed logic in twi_startmessage(). 2016-07-09 06:51:07 -06:00
ziggurat29
ee55a0b9a3 update README.txt to reflect new implementation status 2016-07-08 17:33:38 -05:00
ziggurat29
af236d4784 STM32L4: add support for tickless OS, and incidentally timers, pwm, oneshot, free-running.... 2016-07-08 17:30:55 -05:00
ziggurat29
0207f6699a port and bit definitions for the various timers on the STM32L4. whew. 2016-07-08 17:26:40 -05:00
ziggurat29
106f87d9ed fix incorrect clock setup for LPTIM1 2016-07-08 16:37:44 -05:00
Gregory Nutt
7473d3f859 Trivial changes from review of PR 2016-07-08 08:03:44 -06:00
Gregory Nutt
75e2f37dd2 Merged in david_s5/nuttx (pull request #89) 
stm32_serial.c edited online with Bitbucket
 2016-07-08 06:40:24 -06:00
Gregory Nutt
591c099470 Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #88) 
Upstream_nucleo 144
 2016-07-08 06:35:46 -06:00
David Sidrane
06036a5841 stm32_serial.c edited online with Bitbucket 2016-07-08 01:56:37 +00:00
David Sidrane
deb3e8143c STM32F7 - DMA working on SDMMC 2016-07-07 15:49:47 -10:00
David Sidrane
f8d3a872ee FIxed STM32F& DMA stm32_dmacapable 2016-07-07 15:49:21 -10:00
ziggurat29
42820c0938 update usb dev/host controller drivers to reflect new(ish) logging standards; augment device enpoint and fifo allocation #defines to do more sanity checking, and be automatically adaptive to size changes. Update README.txt to reflect current status of the implementation. 2016-07-07 13:54:35 -05:00
ziggurat29
7c428efa97 Merge branch 'master' into stm32l4_usb 
Conflicts:
	configs/stm32l476vg-disco/nsh/defconfig
 2016-07-07 12:27:20 -05:00
Gregory Nutt
c16500dfdb STM32 timer. More clean up: Add all function prototypes. Reorder functions to match ordering in operations structure. 2016-07-06 14:24:59 -06:00
Gregory Nutt
7c568f249a STM32: Various fixed to get a clean compile after integrating tickless mode. Mostly because patch came from an old version of NuttX. 2016-07-06 13:37:08 -06:00
Gregory Nutt
711f3318c5 STM32 timer: Reorganize to conform better with the NuttX coding style 2016-07-06 13:36:17 -06:00
Max Neklyudov
d8286a7f47 STM32: Add support for Tickless mode (two timer implementation) 2016-07-06 12:48:30 -06:00
Gregory Nutt
4d8213870c Freedom-K64F: Update Flash Clock divider. Flash clock must not exceed 24 Mhz 2016-07-06 12:11:26 -06:00
Gregory Nutt
c8d6707aaf Freedom-K64F: Increase MCU clock to 120MHz 2016-07-06 11:03:27 -06:00