Gregory Nutt
|
acba69d9a4
|
SAM4E: Pin multiplex definition header file
|
2014-02-21 18:10:53 -06:00 |
|
Gregory Nutt
|
ff92f4f81f
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
Gregory Nutt
|
1b0fce86ad
|
SAM4E: Add memory map header file
|
2014-02-21 09:33:16 -06:00 |
|
Gregory Nutt
|
159938e6d8
|
SAM4E: Add vector definition header files
|
2014-02-21 08:46:16 -06:00 |
|
Gregory Nutt
|
2b4464e716
|
unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem
|
2014-02-20 18:14:02 -06:00 |
|
Gregory Nutt
|
462ea02c0c
|
SAMD20: Some progress debugging SPI. Currently hangs
|
2014-02-20 15:20:42 -06:00 |
|
Gregory Nutt
|
9c1d9e44d4
|
SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed
|
2014-02-20 11:27:59 -06:00 |
|
Gregory Nutt
|
d2bb6f3e0f
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
07f750ba3d
|
SAMD: A little more SPI logic
|
2014-02-19 18:48:59 -06:00 |
|
Gregory Nutt
|
7f8a0a01c7
|
LM3/4: Several errors were unmasked with UARTs > UART2 were enabled. Fromo Gosha
|
2014-02-19 17:02:30 -06:00 |
|
Gregory Nutt
|
172699fc96
|
SAMD20: Add a framework for an SPI driver
|
2014-02-19 16:52:12 -06:00 |
|
Gregory Nutt
|
0d47805ee4
|
SAMD20: Move some common SERCOM logic to a separate file where it can be shared
|
2014-02-19 14:47:04 -06:00 |
|
Gregory Nutt
|
c8757cb0e6
|
STM32 Timer: Set CCMR wehn selecting timer channel. From David Sidrane
|
2014-02-18 13:50:46 -06:00 |
|
Gregory Nutt
|
a916f2a008
|
STM32 SPI: Disable SPI before modifying CR1
|
2014-02-18 13:42:20 -06:00 |
|
Gregory Nutt
|
0c19cc2c13
|
More STM32F429 Discovery FPU-related changes from David Alessio
|
2014-02-18 12:07:17 -06:00 |
|
Gregory Nutt
|
c461be6b32
|
SAMD20: Increase FLASH waitstates to 2
|
2014-02-18 10:37:42 -06:00 |
|
Gregory Nutt
|
828dd726d9
|
Mostly cosmetic clean-up of comments
|
2014-02-17 19:22:53 -06:00 |
|
Gregory Nutt
|
26db6a7609
|
SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time
|
2014-02-17 18:09:17 -06:00 |
|
Gregory Nutt
|
e96a160a24
|
SAMD20: Now runs, but no serial output
|
2014-02-17 14:21:22 -06:00 |
|
Gregory Nutt
|
c7c149c42f
|
SAMD20: Initial debug changes to get clocking
|
2014-02-17 11:36:52 -06:00 |
|
Gregory Nutt
|
ae3b20b04b
|
SAMD20: Misc changes for a clean build with debug enabled
|
2014-02-17 08:14:19 -06:00 |
|
Gregory Nutt
|
6841f0b627
|
SAMD20: Add WDT and EVSYS register definition header files
|
2014-02-16 17:21:36 -06:00 |
|
Gregory Nutt
|
af0cc639d8
|
SAMD20: Add I2C slave register definition header file
|
2014-02-16 14:44:03 -06:00 |
|
Gregory Nutt
|
3ccf90b949
|
SAM20D: Add SPI and I2C master register definition header files
|
2014-02-16 13:07:31 -06:00 |
|
Gregory Nutt
|
46348a29bb
|
SAMD20: The basic port is complete but still untested
|
2014-02-16 11:34:32 -06:00 |
|
Gregory Nutt
|
b219b3c7f6
|
SAMD20: Completes low-level USART logic
|
2014-02-16 09:42:29 -06:00 |
|
Gregory Nutt
|
305df5ccf1
|
SAMD20: More SERCOM USART configuration logic
|
2014-02-15 17:53:55 -06:00 |
|
Gregory Nutt
|
4fc57e3c6a
|
SAMD20: A little more USART logic
|
2014-02-15 15:58:48 -06:00 |
|
Gregory Nutt
|
2ec06dc52f
|
SAMD20: Beginning of SERCOM UART configuration logic
|
2014-02-15 14:22:56 -06:00 |
|
Gregory Nutt
|
dfb75147df
|
SAM D20: Add SERCOM USART register definition header file
|
2014-02-15 11:37:09 -06:00 |
|
Gregory Nutt
|
7c82d29dda
|
SAMD20: Finishes basic clock configuration logic
|
2014-02-15 10:18:05 -06:00 |
|
Gregory Nutt
|
3a541ece74
|
SAM D20: More clock configuration logic (still incomplete)
|
2014-02-14 16:46:21 -06:00 |
|
Gregory Nutt
|
32c23c6af0
|
SAM D20: Put fuse related definition in a separate header file so make license statement cleaner
|
2014-02-14 14:33:34 -06:00 |
|
Gregory Nutt
|
6017cd842b
|
SAM D20: A little more clock configuration logic (still incomplete)
|
2014-02-14 13:38:56 -06:00 |
|
Gregory Nutt
|
39f0f6dbb7
|
SAMD20: Add NVMCTRL register definition header file. Also empty framework for clock configuration
|
2014-02-14 11:03:22 -06:00 |
|
Gregory Nutt
|
4ea8d21fcc
|
STM32 serial: Fix clone typo.. FLOWCONROL vs FLOWCONTROL
|
2014-02-14 09:09:56 -06:00 |
|
Gregory Nutt
|
f30412753e
|
SAMD20: Add SYSCTRL register definition header file
|
2014-02-13 15:41:16 -06:00 |
|
Gregory Nutt
|
6fd6c6e11d
|
SAMD20: Add GCLK and PM register definition header files
|
2014-02-13 14:07:58 -06:00 |
|
Gregory Nutt
|
6efc562419
|
SAMD20: Add port configuration logic
|
2014-02-13 12:44:22 -06:00 |
|
Gregory Nutt
|
f1b69a0460
|
Add SAMD20 pin configuration definitions
|
2014-02-13 10:56:15 -06:00 |
|
Gregory Nutt
|
eb769a9a0d
|
Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic
|
2014-02-13 09:14:03 -06:00 |
|
Gregory Nutt
|
c9b48b043c
|
Fix-up some SAMD20 SERCOM conditionals
|
2014-02-12 18:29:23 -06:00 |
|
Gregory Nutt
|
991a897f09
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
6fea68c36e
|
Add basic framework to support the Atmel SAMD Cortex-M+ chip
|
2014-02-12 15:07:11 -06:00 |
|
Gregory Nutt
|
05cf59feef
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
Gregory Nutt
|
e3b409a436
|
More changes to reduce complaints from CppCheck. Some latent bugs fixes, but probably some new typos introduced
|
2014-02-10 19:11:56 -06:00 |
|
Gregory Nutt
|
b3792fcd86
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
16e3293e69
|
USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad
|
2014-02-09 16:50:09 -06:00 |
|
Gregory Nutt
|
0920195725
|
LPC17 USB Host: Fix a compile error when USB debug is enabled
|
2014-02-09 15:54:58 -06:00 |
|
Gregory Nutt
|
976e178ac4
|
Fix a compile error that crept into the LPC17xx USB host driver
|
2014-02-09 13:45:18 -06:00 |
|
Gregory Nutt
|
2865608743
|
A10 had the same cut'n'paste error as did the LM4F
|
2014-02-03 17:22:47 -06:00 |
|
Gregory Nutt
|
06008553a2
|
Fix cut'n'paster errors in conditional compilation. Prevented LM4F120 Launchpad UARTs 2-7 from being used
|
2014-02-03 17:00:05 -06:00 |
|
Gregory Nutt
|
0d325c213f
|
A10: Make sure it is tolerant of CONFIG_BOOT_SDRAM_DATA
|
2014-01-29 08:16:02 -06:00 |
|
Gregory Nutt
|
6e6b048e5a
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
e29e0f1cc4
|
ARMv7-A: Conditionally compile out more unneeded logic when .data and .bss are in SDRAM
|
2014-01-28 16:39:08 -06:00 |
|
Gregory Nutt
|
93bd80b080
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
51e64910a0
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
c930554c2c
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
4aee332cd1
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
ddd678e45b
|
Remove EFM32 from build system
|
2014-01-27 10:41:06 -06:00 |
|
Gregory Nutt
|
26b7316609
|
Remove support for EFM32. Not ready to be fielded
|
2014-01-27 08:03:39 -06:00 |
|
Gregory Nutt
|
a26b03d0d0
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
231889c888
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
64aa48c60f
|
Assembler changes with the gcc-47 distribution from ARM mean that we need to be explicit about branch one or more of the wide branch opcodes results in bad table branching. From Mike Smith
|
2014-01-23 15:29:57 -06:00 |
|
Gregory Nutt
|
07d12a800d
|
Basic support for the EFM32 processor family from Richar Cochran
|
2014-01-23 07:56:10 -06:00 |
|
Gregory Nutt
|
186f6ce828
|
arch/arm/src/Makefile: dependency directory list is now computed from the VPATH. From Richard Cochran
|
2014-01-23 07:41:00 -06:00 |
|
Gregory Nutt
|
1061e67f14
|
Fix error in last ARMv7-M up_disable_irq checkin
|
2014-01-15 15:26:32 -06:00 |
|
Gregory Nutt
|
e43f86071d
|
Fix all Cortex-M3/4 implementations of up_disable_irq(). They were doing nothing. Thanks to Manuel Stühn for the tip.
|
2014-01-15 09:56:30 -06:00 |
|
Gregory Nutt
|
4de5e40669
|
Individual IRQs are not longer disabled on each interrupt. See ChangeLog for detailed explanation
|
2014-01-15 08:09:19 -06:00 |
|
Gregory Nutt
|
dd4e64d9f3
|
Changes to get PX4 config to build. Also some warning removal
|
2014-01-14 13:30:22 -06:00 |
|
Gregory Nutt
|
e37c12e88c
|
A10: Serial clock is OSC24M. From Alan Carvalho de Assis
|
2014-01-10 15:32:42 -06:00 |
|
Gregory Nutt
|
fc2ff5ad75
|
Fix types in conditional compilation
|
2014-01-10 13:36:18 -06:00 |
|
Gregory Nutt
|
b4a577a49e
|
Add support for the XPT2046 touchscreen controller on the Viewtool LCD module
|
2014-01-09 10:57:17 -06:00 |
|
Gregory Nutt
|
162e240ed3
|
Fix STM32F103VE SPI3 definitions; Fix bug introduced in recent NX reorganization. From Steve Redler IV
|
2014-01-08 16:44:11 -06:00 |
|
Gregory Nutt
|
363d44b7d0
|
Cosmetic spaces to tabs change
|
2013-12-08 10:38:33 -06:00 |
|
Gregory Nutt
|
1cbb15db1a
|
A10: Fix serial TX interrupts
|
2013-12-08 09:26:53 -06:00 |
|
Gregory Nutt
|
e4358ad7ff
|
A10: Correct handling of the serial busy interrupt
|
2013-12-08 08:51:19 -06:00 |
|
Gregory Nutt
|
c131e94d04
|
Add more nops after enabling MMU for Cortex-A8
|
2014-01-07 08:38:00 -06:00 |
|
Gregory Nutt
|
25abb10ef3
|
A10: Handle UART BUSY interrupt; Back out change to mkconfig.c -- it causes problems for assembly
|
2013-12-07 11:46:08 -06:00 |
|
Gregory Nutt
|
e40cc00b06
|
A10: Add missing interrupt handling logic for UART4-7 and remove bogus flow control logic
|
2014-01-06 12:08:32 -06:00 |
|
Gregory Nutt
|
f1e44300c6
|
A10: Fix error in IRQ dispatch; vector table seems to be offset by 64 bytes?
|
2013-12-07 08:36:30 -06:00 |
|
Gregory Nutt
|
e86f940374
|
SVC is the preferred mnemonic vs. SWI for cortex A
|
2014-01-05 16:21:41 -06:00 |
|
Gregory Nutt
|
0673a9564c
|
Oops. Mnemonic changed from SWI to SVC in cortex A
|
2014-01-05 15:59:49 -06:00 |
|
Gregory Nutt
|
b9816723a5
|
Add ARMv7-A syscall.h header file
|
2014-01-05 15:49:06 -06:00 |
|
Gregory Nutt
|
e83bd3e961
|
Viewtools STM32F103: Add SSD1289 LCD support
|
2014-01-05 14:14:59 -06:00 |
|
Gregory Nutt
|
b1d61b4e82
|
STM32: Single wire UART support from Thomas Grubler
|
2014-01-02 07:56:46 -06:00 |
|
Gregory Nutt
|
3f4064281a
|
STM3240G-EVAL knxwm: Work around CodeSourcery library bug by switching to buildroot
|
2013-12-31 10:55:46 -06:00 |
|
Gregory Nutt
|
f51b69b198
|
Decoupling NX user interfaces to support NX kernel build (phase 1)
|
2013-12-27 13:18:20 -06:00 |
|
Gregory Nutt
|
543c16de75
|
Fix naming of STM32 F3 SPI2 MOSI and MISO pins. From Brian Webb
|
2013-12-27 11:15:18 -06:00 |
|
Gregory Nutt
|
2d92d7825d
|
STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled
|
2013-12-26 10:45:21 -06:00 |
|
Gregory Nutt
|
515fad9616
|
Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~
|
2013-12-26 09:22:37 -06:00 |
|
Gregory Nutt
|
8660aed4a9
|
F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS
|
2013-12-25 18:34:15 -06:00 |
|
Gregory Nutt
|
4100de6648
|
Fix a duplicate label introduce in recent commit
|
2013-12-23 14:29:25 -06:00 |
|
Gregory Nutt
|
9c2c1e8589
|
Need to protect state on stack to do nested interrupt handling
|
2013-12-23 14:11:32 -06:00 |
|
Gregory Nutt
|
29c43b0b24
|
Fixes a few more high priority, nested interrupt logic
|
2013-12-23 11:13:56 -06:00 |
|
Gregory Nutt
|
c9f18483b3
|
Several fixes related to Cortex-M RAM vectors
|
2013-12-22 18:19:08 -06:00 |
|
Gregory Nutt
|
1705b3f894
|
Fix some missing parameters in macros
|
2013-12-22 16:29:36 -06:00 |
|
Gregory Nutt
|
e73291a8ea
|
Finish the high priority, nested interrupt handler test (does not work)
|
2013-12-22 13:23:57 -06:00 |
|
Gregory Nutt
|
161a172dc1
|
Add logic to configure interrupt controller debug; Fix high priority, nested interrupt build problems
|
2013-12-22 11:16:29 -06:00 |
|
Gregory Nutt
|
eaed4c04a2
|
Finishes coding of ARMv7-M high priority nested interrupt logic. Still undocumented; still not fully tested
|
2013-12-21 15:05:48 -06:00 |
|
Gregory Nutt
|
3855ce04e8
|
Beginning of high priority nested interrupt support for the ARMv7-M family
|
2013-12-21 11:03:38 -06:00 |
|
Gregory Nutt
|
f8d608a054
|
Fix a typo that was cloned to several SAMA5 and MTD files
|
2013-12-21 09:45:27 -06:00 |
|
Gregory Nutt
|
f3198d5812
|
Cosmetic: Changlog and update to comments
|
2013-12-20 16:24:22 -06:00 |
|
Gregory Nutt
|
f53f269a84
|
Kconfigs: Interrupt prioritization should not be automatically selected
|
2013-12-20 08:42:54 -06:00 |
|
Gregory Nutt
|
d28622a628
|
Replace explicit hex MMU value with definition
|
2013-12-18 12:47:43 -06:00 |
|
Gregory Nutt
|
9462db3d3c
|
A10: Extend register debug logic
|
2013-12-18 11:26:48 -06:00 |
|
Gregory Nutt
|
891ca0c590
|
Fix bad register name in INTC debug function
|
2013-12-18 10:14:12 -06:00 |
|
Gregory Nutt
|
b48685b34b
|
Cortex-A: Fix start-up cache invalidation logi
|
2013-12-18 09:01:43 -06:00 |
|
Gregory Nutt
|
2dcf15944f
|
A10: Make sure that interrupts are disabled and cleared
|
2013-11-17 11:40:58 -06:00 |
|
Gregory Nutt
|
89a1cff17b
|
Page lies in SRAM A2 not A1
|
2013-11-17 10:37:10 -06:00 |
|
Gregory Nutt
|
9ab637d218
|
Remove executable mode bits
|
2013-11-17 08:27:11 -06:00 |
|
Gregory Nutt
|
a8fa901535
|
A10: Fix DDR mapping
|
2013-12-17 09:22:27 -06:00 |
|
Gregory Nutt
|
77c2cf2aa8
|
Cosmetic changes to comments and README files
|
2013-12-16 13:48:20 -06:00 |
|
Gregory Nutt
|
05d6d3c252
|
Trivial updates to comments and README files
|
2013-12-16 11:13:55 -06:00 |
|
Gregory Nutt
|
ccd5763003
|
Review Cortex-A9 CP15 registers and update register definitions
|
2013-12-16 10:23:29 -06:00 |
|
Gregory Nutt
|
1ebe9bdae2
|
Back port some A10 changes into the SAMA5 memory map definitions
|
2013-12-16 09:21:55 -06:00 |
|
Gregory Nutt
|
0ef05b06d7
|
ARMv7-A: If the page table does not like in same address range as .text and primary RAM, then we will need to set up an additional mapping for the page table at boot time.
|
2013-12-16 08:26:07 -06:00 |
|
Gregory Nutt
|
726557c712
|
Create procfs_utils.c; File missed from last commit; + remove warning from mm_memalign.c (how did this work before?)
|
2013-12-14 08:53:23 -06:00 |
|
Gregory Nutt
|
4d89d0f383
|
A10 serial driver (still needs some work). From Alan Carvalho de Assis
|
2013-12-13 16:41:44 -06:00 |
|
Gregory Nutt
|
94da6b82d2
|
Eliminate some warnings in the pcDuino A10 build
|
2013-12-13 13:09:45 -06:00 |
|
Gregory Nutt
|
cbecff0f2f
|
A10: Add A10 configuration header file
|
2013-12-13 12:53:33 -06:00 |
|
Gregory Nutt
|
41ce419ebc
|
A10: Timer interrupt handler
|
2013-12-13 12:42:26 -06:00 |
|
Gregory Nutt
|
009c65c25a
|
Finish A10 Timer register definitions
|
2013-12-13 11:44:52 -06:00 |
|
Gregory Nutt
|
6190664203
|
Beginning of Timer register definition file for the A10
|
2013-12-12 12:27:30 -06:00 |
|
Gregory Nutt
|
b46501fafc
|
A10/pcDuino/Linux build fixes
|
2013-12-11 17:05:08 -06:00 |
|
Gregory Nutt
|
212e8bf655
|
A10: Re-vamp pin configuratin header file
|
2013-12-11 14:40:52 -06:00 |
|
Gregory Nutt
|
7076b5ac51
|
A10+pcDuino: PIO support, LED and button support
|
2013-12-11 13:23:40 -06:00 |
|
Gregory Nutt
|
e92a15df7f
|
A10 PIO register definition header file
|
2013-12-10 15:53:32 -06:00 |
|
Gregory Nutt
|
b4144e21d6
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
Gregory Nutt
|
a35d366dea
|
More OV2640 initialization logic
|
2013-12-10 09:10:39 -06:00 |
|
Gregory Nutt
|
69710d1657
|
A10 peripheral selection logic
|
2013-12-09 15:24:54 -06:00 |
|
Gregory Nutt
|
753df33e55
|
A little SAMA5 camera stuff
|
2013-12-09 14:20:11 -06:00 |
|
Gregory Nutt
|
bda70b1dd6
|
A10 UART: Register definition header file
|
2013-12-09 14:18:32 -06:00 |
|
Gregory Nutt
|
fe2f4aff1f
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
8f11a14535
|
A10: Re-write of interrupt management logic
|
2013-12-09 07:47:15 -06:00 |
|
Gregory Nutt
|
1a8d5b343c
|
Add A10 interrupt numbers
|
2013-12-08 11:49:39 -06:00 |
|
Gregory Nutt
|
641767965b
|
A10 interrupt logic
|
2013-12-08 10:18:28 -06:00 |
|
Gregory Nutt
|
509cf450b6
|
A10 mmu configuration and INTC register definitions
|
2013-12-08 09:11:52 -06:00 |
|
Gregory Nutt
|
38eee28af6
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
0f14b63afb
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
d460e8d7fa
|
Add basic directory structure to support the Allwinner A10
|
2013-12-07 13:06:34 -06:00 |
|
Gregory Nutt
|
b0859ea286
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
f5bc559417
|
SAMA5 NAND: Fix some DMA-related issues
|
2013-12-06 13:04:15 -06:00 |
|
Gregory Nutt
|
e92d493d8e
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
1b21322f06
|
SAMA5 NAND: Fix several bugs associated with PMECC data transfers
|
2013-12-05 18:20:32 -06:00 |
|
Gregory Nutt
|
d01808c603
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
10143f89f4
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
333a49152b
|
LPC31 EHCI: Fix errors in DEBUGASSERT statements
|
2013-12-04 14:29:24 -06:00 |
|
Gregory Nutt
|
39c3b783ae
|
SAMA5 NAND: PMECC logic was reading past the end of the user buffer
|
2013-12-04 13:14:26 -06:00 |
|
Gregory Nutt
|
8a97561ceb
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
9632d2a7f6
|
SAMA5 NAND: Do not perform DMA on small transfers
|
2013-12-04 07:41:29 -06:00 |
|
Gregory Nutt
|
0a456987c6
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
d125a28b0d
|
SAMA5 DMA: Address of next descriptor in list is a physical address
|
2013-12-03 09:48:13 -06:00 |
|
Gregory Nutt
|
8ad33030d3
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
2fcec7e80c
|
Kconfigs: Fix and issue with SERCOMM_CONSOLE being define in two places
|
2013-12-02 17:21:46 -06:00 |
|
Gregory Nutt
|
1de529cc42
|
SAMA5 NAND: Can't DMA using DMAC1. Add lots of NAND DMA debug instrumentation
|
2013-12-02 17:15:57 -06:00 |
|
Gregory Nutt
|
c62a9c269a
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
06dca0d263
|
SAMA5 NAND: Return value should not be ignored
|
2013-12-01 13:39:28 -06:00 |
|
Gregory Nutt
|
cdaa0b9671
|
ViewTool STM32F107: Basic NSH checks out okay
|
2013-12-01 10:05:40 -06:00 |
|
Gregory Nutt
|
6cd5215759
|
SAMA5 NAND: Fix some race conditions in checking status bits
|
2013-11-30 14:17:32 -06:00 |
|
Gregory Nutt
|
394d1a8232
|
SAMA5 EHCI: Fix case when interrupt endpoints enabled
|
2013-11-29 16:42:44 -06:00 |
|
Gregory Nutt
|
b91ed67902
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
d44b690dce
|
LPC31 EHCI: Verified that driver works with keyboard (low-speed, interrupt endpoints)
|
2013-11-29 14:31:42 -06:00 |
|
Gregory Nutt
|
4b8ba0cddc
|
SAMA5 NAND: Don't use HSMC interrupts. They occur to quickly and cause mysterious race conditions
|
2013-11-29 11:52:47 -06:00 |
|
Gregory Nutt
|
49bcf2da73
|
LPC31 EHCI: Fixes so that high- and low-speed devices work with the EHCI host
|
2013-11-28 15:13:56 -06:00 |
|
Gregory Nutt
|
0dddb37c36
|
LPC31 EHCI: Make stream disable a configurable option
|
2013-11-28 13:30:06 -06:00 |
|
Gregory Nutt
|
d2eee4b7f0
|
SAMA5 NAND: Still debugging
|
2013-11-28 12:21:33 -06:00 |
|
Gregory Nutt
|
ec3397dde6
|
STM32 F4: Add support for GPIOK and GPIOJ. From Ken Pettit
|
2013-11-28 08:13:59 -06:00 |
|
Gregory Nutt
|
4f714d2be4
|
LPC31 EHCI: Seems to work after re-ordering some initialization logic
|
2013-11-27 13:14:23 -06:00 |
|
Gregory Nutt
|
a0a17933fd
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
e8c0512ea6
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
2f0326033b
|
SAMA5 DMA: Add an option to disable DMA for debug purposes
|
2013-11-26 06:55:14 -06:00 |
|
Gregory Nutt
|
ce293c1e75
|
SAMA5 NAND: Changes made durint testing (still does not work)
|
2013-11-25 18:38:03 -06:00 |
|
Gregory Nutt
|
bafa5b1031
|
SAMA5 NAND: Trivial changes
|
2013-11-25 14:16:04 -06:00 |
|
Gregory Nutt
|
eb3a2335da
|
SAMA5 NAND: Fix a few race conditions
|
2013-11-25 13:53:58 -06:00 |
|
Gregory Nutt
|
34bc3eea1d
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
9272c2343e
|
SAMA5 PMECC: Code complete
|
2013-11-25 09:04:41 -06:00 |
|
Gregory Nutt
|
f6bef28d96
|
SAMA5 NAND: Retrofit trim page logic
|
2013-11-24 14:57:30 -06:00 |
|
Gregory Nutt
|
23d767a19e
|
SAMA5 PMECC: Ported Gallois tables
|
2013-11-24 12:36:42 -06:00 |
|
Gregory Nutt
|
31a65431f0
|
SAMA5 NAND: Finish upper part of PMECC logic; add HSMC interrupt handling
|
2013-11-24 11:51:30 -06:00 |
|
Gregory Nutt
|
79c4fb8fe6
|
SAMA5 PMECC: More progress, still not complete
|
2013-11-24 09:37:59 -06:00 |
|
Gregory Nutt
|
efffc0bde1
|
SAMA5 PMECC: A little more
|
2013-11-23 11:26:33 -06:00 |
|
Gregory Nutt
|
590adfa766
|
SAMA5 PMECC: Some ROM-related interface updates
|
2013-11-23 10:06:33 -06:00 |
|
Gregory Nutt
|
e61adfbbbe
|
Cosmetic changes
|
2013-11-22 13:36:07 -06:00 |
|
Gregory Nutt
|
25449c2d1f
|
SAMA5 NAND: More stuff
|
2013-11-22 11:19:32 -06:00 |
|
Gregory Nutt
|
3b1928e1f1
|
LPC31xx EHCI: Power power changes
|
2013-11-21 18:25:10 -06:00 |
|
Gregory Nutt
|
b93320e96b
|
LPC3131 EHCI: More fixes
|
2013-11-21 16:39:49 -06:00 |
|
Gregory Nutt
|
b015018db2
|
LPC-H3131: SDRAM timing update. Still does not work
|
2013-11-21 14:46:49 -06:00 |
|
Gregory Nutt
|
ae79d5b59f
|
SAMA5 NAND: More progress
|
2013-11-21 11:13:08 -06:00 |
|
Gregory Nutt
|
9ec6e4685a
|
lpc31 ECHI. Early debug changes
|
2013-11-20 16:24:10 -06:00 |
|
Gregory Nutt
|
ef226fe49f
|
ARM9: More cache control functions
|
2013-11-20 15:24:14 -06:00 |
|
Gregory Nutt
|
6723409a6a
|
SAMA5 NAND: Add block erase logic
|
2013-11-20 13:55:23 -06:00 |
|
Gregory Nutt
|
b83efba920
|
LPC3131 EHCI: Add USB host tracing support
|
2013-11-19 15:48:02 -06:00 |
|
Gregory Nutt
|
841d0dea3b
|
Rethinking some NAND interfaces
|
2013-11-19 08:50:12 -06:00 |
|
Gregory Nutt
|
5cad0606da
|
Add support for the Olimex LPC-H3131 board
|
2013-11-18 14:51:38 -06:00 |
|
Gregory Nutt
|
59f1b7813c
|
Finishes up NAND software ECC logic
|
2013-11-18 11:42:17 -06:00 |
|
Gregory Nutt
|
e0a02bbd2c
|
MTD NAND: Beginning of software ECC logic
|
2013-11-18 09:43:44 -06:00 |
|
Gregory Nutt
|
3c4182115d
|
More NAND stuff
|
2013-11-17 12:22:09 -06:00 |
|
Gregory Nutt
|
76e380d587
|
Continuing NAND integration
|
2013-11-17 08:56:30 -06:00 |
|
Gregory Nutt
|
c11cfd3368
|
More NAND logic (still not complete)
|
2013-11-16 18:26:07 -06:00 |
|
Gregory Nutt
|
28a1a5e428
|
Futher NAND development
|
2013-11-16 13:19:09 -06:00 |
|
Gregory Nutt
|
204d351720
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
b3c77f88b0
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
cdf2e03878
|
Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h
|
2013-11-15 11:22:23 -06:00 |
|
Gregory Nutt
|
3ab6d2b40a
|
SAMA5 NAND: Basic support for access to NAND FLASH
|
2013-11-15 09:30:05 -06:00 |
|
Gregory Nutt
|
9680043a46
|
LPC31 EHCI: First cut at an EHCI driver for the LPC31
|
2013-11-14 16:12:22 -06:00 |
|
Gregory Nutt
|
ca61cba028
|
LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools
|
2013-11-14 15:33:43 -06:00 |
|
Gregory Nutt
|
1dc1b8caa3
|
SAMA5 PCK: Need to configure the programmable clock output pin as well
|
2013-11-14 11:41:59 -06:00 |
|
Gregory Nutt
|
0baa2807a6
|
SAMA5 ISI: Framework for ISI drivers. Not much there on initial check-in
|
2013-11-14 11:17:00 -06:00 |
|
Gregory Nutt
|
66111ef582
|
SAMA5 PCK: Add support for programmable clock outputs
|
2013-11-14 11:16:04 -06:00 |
|
Gregory Nutt
|
2036f600d7
|
STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file
|
2013-11-14 08:29:36 -06:00 |
|
Gregory Nutt
|
e698fe5433
|
SAMA SSC: Add bufffer dump debug instrumentation
|
2013-11-12 16:22:05 -06:00 |
|
Gregory Nutt
|
141cebc8c7
|
SAMA5 SSC: Fix DMA data width: 16 not 32 bits
|
2013-11-12 15:53:02 -06:00 |
|
Gregory Nutt
|
5d2ff0d4dc
|
SAMA5: Fix issues with RX synch
|
2013-11-12 14:56:00 -06:00 |
|
Gregory Nutt
|
43f7418d56
|
SAMA5 SSC: With these changes, the TX DMA works. But nothing is received from the loopback
|
2013-11-12 12:19:11 -06:00 |
|
Gregory Nutt
|
196cf89d43
|
SAMA5 SSC: Fix an error in the DMA timeout calculation
|
2013-11-12 10:59:41 -06:00 |
|
Gregory Nutt
|
f6bbb1217a
|
SAMA4 SSC: Additional DEBUG instrumentation
|
2013-11-12 10:19:52 -06:00 |
|
Gregory Nutt
|
fce0a3fc6b
|
Various fixes from initial attempts to integrate the SAMA5 SSC/I2C driver with the I2C character driver loopback test
|
2013-11-11 15:18:57 -06:00 |
|
Gregory Nutt
|
5032829f9a
|
STM32F429 LTDC header files and framebuffer driver framework from Ken Pettit
|
2013-11-11 14:05:29 -06:00 |
|
Gregory Nutt
|
60950c760f
|
SAMA5 I2S Kconfig update
|
2013-11-11 13:50:25 -06:00 |
|
Gregory Nutt
|
c615f6e6fd
|
Support for the Atmel SAM4E family. From Mitko
|
2013-11-11 07:45:09 -06:00 |
|
Gregory Nutt
|
7bb75a5f4a
|
SAMA5 LCD: More bad color format definitions
|
2013-11-10 16:31:21 -06:00 |
|
Gregory Nutt
|
6e6350e1c6
|
SAMA5 LCD: Fix some bad color format definitions
|
2013-11-10 16:16:33 -06:00 |
|
Gregory Nutt
|
6dac38cbb6
|
SAMA5 I2S: Need to update the count of valid bytes at the conclusion of the read DMA
|
2013-11-10 15:02:51 -06:00 |
|
Gregory Nutt
|
6d4a87f330
|
I2S simplifed audio buffer queuing
|
2013-11-10 14:51:33 -06:00 |
|
Gregory Nutt
|
9859d1131c
|
Small but important typo in the last commit
|
2013-11-10 11:51:50 -06:00 |
|
Gregory Nutt
|
53667316be
|
SAMA5 SSC: Add support for loopback mode. Plus unrelated Make.defs file from the last checkin
|
2013-11-10 11:46:45 -06:00 |
|
Gregory Nutt
|
8cc9d6a572
|
Kinetis KL: PWM driver from Alan Carvalho de Assis
|
2013-11-10 10:34:45 -06:00 |
|
Gregory Nutt
|
ce58c79a1b
|
Add an I2S character driver. This driver is only intended to support I2S testing and is inappropriate for use with real I2S devices
|
2013-11-10 10:24:09 -06:00 |
|
Gregory Nutt
|
fe800abc58
|
STM32 OTG FS device and host drivers extended so that they can support either the OTG FS peripheral or the OTG HS peripheral (in FS mode). This was done as a quick way to get USB support on the STM32F429 which has only OTG HS. From Ken Pettit
|
2013-11-10 07:23:06 -06:00 |
|
Gregory Nutt
|
7fde75a876
|
SAMA5 I2S: Try to chain as many DMAs together as possible
|
2013-11-09 15:01:18 -06:00 |
|
Gregory Nutt
|
687567f7b7
|
SAMA5 I2S: Fix compile errors when all debug options enabled
|
2013-11-09 13:46:12 -06:00 |
|
Gregory Nutt
|
e746a3d574
|
SAMA5 I2S: Driver is code complete, untested and subject to some rethinking
|
2013-11-09 13:08:20 -06:00 |
|
Gregory Nutt
|
1ee17b5b19
|
SAMA5 I2S: Improved I2S buffering
|
2013-11-08 16:09:20 -06:00 |
|
Gregory Nutt
|
06d8d4c3ea
|
SAMA5 SSC: Updated I2S driver
|
2013-11-08 12:03:18 -06:00 |
|
Gregory Nutt
|
38b981e50c
|
Back out a small part of the recent STM32 usbdev fix. From David Sidrane
|
2013-11-07 19:07:16 -06:00 |
|
Gregory Nutt
|
3e2240331d
|
STM32 F1 USB: Fix OUT SETUP command bug. From David Sidrane
|
2013-11-07 17:25:05 -06:00 |
|
Gregory Nutt
|
893f36c061
|
Support for the STM32F429 from Ken Pettit
|
2013-11-07 16:47:43 -06:00 |
|
Gregory Nutt
|
cefc40817f
|
SAMA5 SSC: Mostly cosmetic name changes
|
2013-11-07 16:13:48 -06:00 |
|
Gregory Nutt
|
904f171afa
|
SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver
|
2013-11-07 12:26:53 -06:00 |
|
Gregory Nutt
|
fdac30a7e6
|
SAMA5 PWM: PWM driver is now functional
|
2013-11-07 09:17:46 -06:00 |
|
Gregory Nutt
|
fadf0564c0
|
SAMA5 PWM: Cosmetic changes to debug output
|
2013-11-06 14:46:19 -06:00 |
|
Gregory Nutt
|
041565d69f
|
SAMA5D3x-EK: Add support board-specific PWM testing
|
2013-11-06 14:38:19 -06:00 |
|
Gregory Nutt
|
231a43bd8d
|
SAMA5 PWM: Driver now in build and configuration system
|
2013-11-06 12:24:51 -06:00 |
|
Gregory Nutt
|
cea00a2eec
|
SAMA5 PWM: Add first cut at PWM driver
|
2013-11-06 10:55:12 -06:00 |
|
Gregory Nutt
|
3f80c56ad5
|
NSH library: Allow USB trace without a USB console
|
2013-11-06 07:09:00 -06:00 |
|
Gregory Nutt
|
6be2a979ef
|
STM32 F1 USB device: Fix handling of EP0 start for large buffers; Add support for decoded USB trace strings. From Davice Sidrane
|
2013-11-05 08:56:06 -06:00 |
|
Gregory Nutt
|
9bd23408a7
|
SAMA5 CAN: Don't enable some many useless error interrupts
|
2013-11-04 11:29:16 -06:00 |
|
Gregory Nutt
|
f383c5d0a4
|
SAMA5 CAN: Fix a data alignment problem
|
2013-11-03 10:41:24 -06:00 |
|
Gregory Nutt
|
a652c6fe42
|
Fixing typos from previous check-ins. Also, missed the ARMv7 IDLE stack coloration
|
2013-11-01 16:06:43 -06:00 |
|
Gregory Nutt
|
04de5c4452
|
Port IDLE/interrupt stack coloration to ARM and ARMv7-A architectures
|
2013-11-01 15:30:18 -06:00 |
|
Gregory Nutt
|
b8085906b9
|
Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane
|
2013-11-01 11:16:51 -06:00 |
|
Gregory Nutt
|
cfcd3cc74b
|
arch/arm/src/stm32/stm32_usbdev.c: On a failure to bind the class driver, the driver reference was being nullified too soon. This caused an exception in usbdev_reset() later. The driver reference will be null
ified later usbdev_unregister when the caller gets the error. From David Sidrane
|
2013-10-31 15:27:52 -06:00 |
|
Gregory Nutt
|
dfbaa301e7
|
SAMA5 PWM register definition header file
|
2013-10-31 10:33:43 -06:00 |
|
Gregory Nutt
|
209d5e8383
|
SAMA5 SSC: Add SSC register definition header file
|
2013-10-30 16:15:51 -06:00 |
|
Gregory Nutt
|
5161f9b7ba
|
apps/platform: A new now for platform-specific applicatin code
|
2013-10-30 09:04:37 -06:00 |
|
Gregory Nutt
|
dda3d9c47e
|
Minor changes while pondering a camera interface
|
2013-10-29 16:57:06 -06:00 |
|
Gregory Nutt
|
08b85d4465
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
848349bbd7
|
STM32 SPI DMA: Fix related to CONFIG_STM32_DMACAPABLE from Ken Pettit
|
2013-10-27 16:23:44 -06:00 |
|
Gregory Nutt
|
93421a988e
|
SAMA5 ADC: If DMA is enabled, then you should be able to configuration larger DMA transfers
|
2013-10-27 12:04:37 -06:00 |
|
Gregory Nutt
|
5033b9e3d6
|
SAMA5 ADC: Fix sample frequency scaling and sequencer setup
|
2013-10-27 10:29:07 -06:00 |
|
Gregory Nutt
|
5c5faa3119
|
SAMA5 ADC: Correct setup of time compare registers
|
2013-10-27 09:35:30 -06:00 |
|
Gregory Nutt
|
4bbe259082
|
SAM3/4 serial: Same supersitituous change as for SAMA5
|
2013-10-26 16:17:07 -06:00 |
|
Gregory Nutt
|
017d23cdb8
|
SAMA5 serial: Restore logic to minimize TX interrupts. Oddly, seems to improve ADC stability
|
2013-10-26 16:02:07 -06:00 |
|
Gregory Nutt
|
f090583cb2
|
SAMA5 TC: Debug instrumentation
|
2013-10-26 14:03:30 -06:00 |
|
Gregory Nutt
|
48ac4dcc2e
|
SAMA5: Register definition file for camera interface
|
2013-10-26 08:25:58 -06:00 |
|
Gregory Nutt
|
6c7528f48c
|
arch/arm/src/sama5/sam_adc.c: Remove a warning
|
2013-10-25 15:18:32 -06:00 |
|
Gregory Nutt
|
cf3845919b
|
Add ioctl to support software triggering of ADC/DAC conversions
|
2013-10-25 14:19:09 -06:00 |
|
Gregory Nutt
|
48bcb3f141
|
sam_tc.c: Fix a timer initialization bug
|
2013-10-25 10:05:00 -06:00 |
|
Gregory Nutt
|
dad8aa9781
|
SAMA5 ADC+TC: Several updates/fixes from ongoing debug
|
2013-10-25 08:46:57 -06:00 |
|
Gregory Nutt
|
15c2d87fb9
|
SAMA5 ADC+TC: Early debug fixes + lots of new debug instrumentation
|
2013-10-24 16:50:51 -06:00 |
|
Gregory Nutt
|
29342298d3
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
0e74e0fca1
|
SAMA5: Add ADC-side of the logic to hook in timer/counter logic needed to drive periodic ADC sampling
|
2013-10-24 13:56:23 -06:00 |
|
Gregory Nutt
|
8710cd4352
|
SAMA5: Hook in timer/counter logic so that it can driver periodic ADC sampling
|
2013-10-24 12:35:42 -06:00 |
|
Gregory Nutt
|
9f5b9c20fe
|
STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger
|
2013-10-24 08:27:09 -06:00 |
|
Gregory Nutt
|
eb648c585b
|
Add support for the STM32F207ZE chip. From Martin Lederhilger
|
2013-10-24 08:25:05 -06:00 |
|
Gregory Nutt
|
df0fc71210
|
Remove carriage returns from SAMA5 TC files just commited
|
2013-10-23 15:39:00 -06:00 |
|
Gregory Nutt
|
22d7fae119
|
SAMA5 Timer/counter library
|
2013-10-23 14:53:37 -06:00 |
|
Gregory Nutt
|
7692af99b6
|
STM32 F1 DAM fix from David Sidrane
|
2013-10-23 14:05:26 -06:00 |
|
Gregory Nutt
|
6a4ffaca12
|
SAMA5 CAN: Update readme on how to configure CAN
|
2013-10-23 11:32:12 -06:00 |
|
Gregory Nutt
|
13e074c5d4
|
Update Changelog
|
2013-10-23 09:13:28 -06:00 |
|
Gregory Nutt
|
856355668c
|
SAMA5 CAN: Driver is now code complete but still untested
|
2013-10-22 15:47:52 -06:00 |
|
Gregory Nutt
|
46b0349408
|
SAMA5: Beginning of a CAN driver
|
2013-10-21 15:52:23 -06:00 |
|
Gregory Nutt
|
2edc58e383
|
SAMA5 CAN: Add register definition file
|
2013-10-21 12:22:27 -06:00 |
|
Gregory Nutt
|
f890af8e53
|
SAMA5 TC: Add timer/counter register definition file
|
2013-10-20 14:47:02 -06:00 |
|
Gregory Nutt
|
84973e9956
|
SAMA5 TRNG: /dev/random appears to be functional
|
2013-10-20 12:08:39 -06:00 |
|
Gregory Nutt
|
386daa25ca
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
1e2c37c04f
|
SAMA5 WDT driver is now functional
|
2013-10-20 09:24:30 -06:00 |
|
Gregory Nutt
|
fe425e18a6
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
|
Gregory Nutt
|
7a1d5866e5
|
SAMA5: Initial WDT timer (untested)
|
2013-10-19 12:26:47 -06:00 |
|
Gregory Nutt
|
49b3366eff
|
SAMA5: Hook RTC into build system; Finish RTC alarm logic; Verify correct behavior of the basic RTC functionality
|
2013-10-19 10:41:20 -06:00 |
|
Gregory Nutt
|
0a5d287e69
|
SAMA5: Add GPBR register definitions
|
2013-10-19 10:22:21 -06:00 |
|
Gregory Nutt
|
d1d9cf4de6
|
SAMA5 RTC: Beginning of an RTC driver for the SAMA5
|
2013-10-18 16:56:46 -06:00 |
|
Gregory Nutt
|
0eea9f2ebe
|
SAMA5: Add RTC and WDT register definition header files
|
2013-10-18 14:47:50 -06:00 |
|
Gregory Nutt
|
b661ba3e2a
|
STM32 DMA Priority: Select the correct default for F1 and other family members
|
2013-10-18 14:13:53 -06:00 |
|
Gregory Nutt
|
1b3127149c
|
SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer
|
2013-10-18 10:11:20 -06:00 |
|
Gregory Nutt
|
5c3f7f118c
|
Add SDIO preflight method
|
2013-10-18 08:15:09 -06:00 |
|
Gregory Nutt
|
fd468d219f
|
Changes to stm32_dmacapable interfaces from Mike Smith
|
2013-10-18 08:06:23 -06:00 |
|
Gregory Nutt
|
0c44715f07
|
STM32 DMA priority corrections from Mike Smith
|
2013-10-18 07:37:24 -06:00 |
|
Gregory Nutt
|
cda1fd00c7
|
Typo fixes for UART7 and UART8 DMA configs. From Mike Smith
|
2013-10-18 07:17:55 -06:00 |
|