Gregory Nutt
98c401a1f4
Update ChangeLog
2015-12-03 10:23:32 -06:00
Gregory Nutt
734144ad66
Update READMEs
2015-12-03 09:52:50 -06:00
Gregory Nutt
f04287305d
Update README
2015-12-02 18:54:17 -06:00
Gregory Nutt
a77786ddf1
Update submodules
2015-12-02 18:09:57 -06:00
Gregory Nutt
216f762e56
Update README
2015-12-02 15:54:20 -06:00
Gregory Nutt
7d3d49e227
Upate submodules
2015-12-02 09:22:58 -06:00
Gregory Nutt
4991f94792
Update README files
2015-12-02 09:22:26 -06:00
Gregory Nutt
99c460a696
Upate README files
2015-12-02 08:37:42 -06:00
Gregory Nutt
acd3b47def
Fix problem in last change to the procfs: Forgot to save the reallocated table pointer!
...
Also added warnings: There are some concurrency issues in the current implementation if you try to modify the procfs data structures will the procfs is mounted and possibly busy.
2015-12-02 05:20:02 -06:00
Gregory Nutt
dd482c3f8b
New procfs entries must be added BEFORE the procfs is mounted
2015-12-02 05:18:10 -06:00
Gregory Nutt
7a7a8f5835
Update submodules
2015-12-01 15:04:57 -06:00
Gregory Nutt
dde6ba85a3
STM32F429i Discovery uses CCM procfs and so needs FS_PROCFS_REGISTER=y
2015-12-01 15:03:39 -06:00
Gregory Nutt
6af3ba78b9
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
2015-12-01 07:48:56 -06:00
Gregory Nutt
9a4192d22b
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
2015-12-01 07:47:41 -06:00
Gregory Nutt
fba809d7c8
Update README files
2015-11-30 17:37:01 -06:00
Gregory Nutt
053aeb555c
Update ChangeLog
2015-11-30 16:51:44 -06:00
Gregory Nutt
2e78fc7178
configs/same70-xplained: Added a network enabled NSH configuration
2015-11-30 16:50:40 -06:00
Gregory Nutt
4c22aae14a
Update ChangeLog
2015-11-30 16:06:10 -06:00
Gregory Nutt
2e3f1327bd
configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional
2015-11-30 16:05:32 -06:00
Gregory Nutt
1f7df26f24
SAME70: Initialization has to be done a little differently because the board has no 32.768KHz crystal installed
2015-11-30 15:20:21 -06:00
Gregory Nutt
fbca4d4ecf
SAME70-Xplained: Update configuration: Board has only one button
2015-11-30 13:10:33 -06:00
Gregory Nutt
00e0ff54e8
tools/testbuild.sh: Changes needed for testing the simulator under Cygwin
2015-11-30 13:06:16 -06:00
Gregory Nutt
5926a09498
Update README
2015-11-30 13:05:14 -06:00
Gregory Nutt
049616b40d
SAME70 Xplained: Refresh configuration, enable PROCFS. Add logic to automatically mount procfs during initialization
2015-11-30 08:04:32 -06:00
Gregory Nutt
5c9e05693e
Upate submodules
2015-11-29 13:54:35 -06:00
Gregory Nutt
1216398f62
sam: Refresh all configurations: Enable PROCFS and NSH_ARCHINIT in all NSH configurations
2015-11-29 13:52:50 -06:00
Gregory Nutt
b9a26bae77
Move up_appinit.c to configs/sim/src where it belongs. Add logic to automatically mount the procfs file system if it is enabled.
2015-11-29 13:30:12 -06:00
Gregory Nutt
11afff74dc
Kconfig change for improved usability
2015-11-29 12:13:24 -06:00
Gregory Nutt
6b9c0c7c72
Fix an error commit with last changes
2015-11-29 12:12:43 -06:00
Gregory Nutt
463637f474
All SAMA5 configurations: Refresh configurations, enable PROCFS in all configurations that have CONFIG_NSH_LIBRARY=y, add logic to automatically mount the procfs if it is enabled
2015-11-29 11:34:09 -06:00
Gregory Nutt
7a551aed6e
STM32F4-Discovery: Refresh all configurations; enable PROCFS in all NSH configurations
2015-11-29 10:02:21 -06:00
Gregory Nutt
9701e66e5c
SAMV71-XULT and STM32F4Discovery: Automatically mount procfs on startup
2015-11-29 09:47:36 -06:00
Gregory Nutt
1fceb9463e
Update and enable procfs in all SAMV71-XULT configurations
2015-11-29 07:16:14 -06:00
Gregory Nutt
1f8f097783
procfs: Use dirent.h macros when testing directory entry type
2015-11-28 08:52:21 -06:00
Gregory Nutt
2eff9aa773
Enable procfs file system in sim/nsh configuration
2015-11-28 07:01:31 -06:00
Gregory Nutt
e4236941c6
net/net_procfs.c: Add basic support for networking procfs entries
2015-11-27 12:33:58 -06:00
Gregory Nutt
509028aa46
SAMV7-XULT: Enable procfs in the netnsh configuration
2015-11-27 12:31:51 -06:00
Gregory Nutt
d2f11015aa
Refresh (and fix) defconfig file
2015-11-26 17:29:44 -06:00
Gregory Nutt
edbb5ec328
arch-specific build needs to include __KERNEL__ flags
2015-11-26 13:17:32 -06:00
Gregory Nutt
c5e097f6d2
Refresh configuration
2015-11-26 13:16:46 -06:00
Gregory Nutt
8075a67803
include/nuttx/net/netdef.h: Add a missing macro
2015-11-26 12:51:45 -06:00
Gregory Nutt
4e10465541
Eliminate a warning
2015-11-26 12:51:13 -06:00
Gregory Nutt
2a93c66948
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:08:09 -06:00
Gregory Nutt
87530bf910
Enable /dev/zero and /dev/loop in sim/nsh configuration
2015-11-26 06:58:09 -06:00
Gregory Nutt
ed35eb0f8d
drivers/loop: Add a loop character device that can be used to setup and teardown loop devices
2015-11-25 17:13:56 -06:00
Gregory Nutt
651bd9e8ad
Rename CONFIG_LOOP to CONFIG_DEV_LOOP
2015-11-25 17:11:27 -06:00
Gregory Nutt
fb0a148812
Update ChangeLog/TODO
2015-11-25 12:02:25 -06:00
Gregory Nutt
e687a9f1b9
sim/nsh: Enable NSH data command and extended time functions
2015-11-25 11:53:42 -06:00
Gregory Nutt
064ef4f1fb
At day-of-week support to strftime()
2015-11-25 11:51:46 -06:00
Gregory Nutt
df431c1844
Merged in paulpatience/nuttx-boards/nucleo_f303re (pull request #22 )
...
Nucleo F303RE: Comment out CONFIG_APPS_DIR
2015-11-25 10:18:23 -06:00
Paul A. Patience
40c4dc435d
Nucleo F303RE: Comment out CONFIG_APPS_DIR
2015-11-25 11:06:22 -05:00
Paul A. Patience
15e25b6664
Nucleo F303RE: Add serialrx configuration
2015-11-25 11:00:30 -05:00
Ken Pettit
c0b9dcf8a9
fs/hostfs: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:26:26 -06:00
Gregory Nutt
bdc6882499
Refresh a configuration
2015-11-25 08:12:14 -06:00
Frank Benkert
570b211f44
SAMV71-XULT: Fix some bad conditional compilation. From Frank Benkert
2015-11-24 06:25:27 -06:00
Gregory Nutt
6230e6e199
size_t should be 64-bits on a 64-bit machine. mmsize_t should be 32-bits (unless CONFIG_MM_SMALL is selected). This commit backs out the last change to stddef.h
2015-11-23 12:03:36 -06:00
Gregory Nutt
175d248af1
Refresh all configurations that have SMARTFS enabled. They should have MKSMARTFS enabled for backward compatibility.
2015-11-23 11:20:47 -06:00
Gregory Nutt
5f7dac8076
Update sub-modules
2015-11-23 11:19:02 -06:00
marawan31
af7cfebff9
added unique id implementation for f4discovery
2015-11-22 13:28:59 -05:00
Gregory Nutt
8914400750
PCF85163: Correct I2C address
2015-11-21 07:14:36 -06:00
Gregory Nutt
abb7171a89
SAMV71-XULT: Add hooks for testing the PCF85263 RTC
2015-11-21 07:14:05 -06:00
Gregory Nutt
9a1ca0d489
Add support for DS1302 and DS3232 RTC chips
2015-11-19 19:26:09 -06:00
Gregory Nutt
0ca9047488
SAME70 Xplained: Update some PHY pin definitions
2015-11-19 17:16:11 -06:00
Gregory Nutt
c34b5108a7
RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver
2015-11-19 14:54:30 -06:00
Gregory Nutt
e9abfb0de8
SAMV71-XULT: Add support for an external I2C RTC
2015-11-19 14:52:52 -06:00
Gregory Nutt
cedec09f8f
SAME70 Xplained: Update README; switch to USART1
2015-11-19 12:15:13 -06:00
Gregory Nutt
5106a8a9ca
SAME70 Xplained: Updated README
2015-11-19 10:25:08 -06:00
Gregory Nutt
f4213873f3
board_uniqueid should return a negated errno value on failure
2015-11-19 10:23:01 -06:00
Marwan Ragab
fb0145d0c8
added unique id implementation for nucleo-f303re
2015-11-19 11:11:12 -05:00
Ken Pettit
7b590ec9a2
drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit
2015-11-18 18:12:06 -06:00
Gregory Nutt
046212dc4e
Update README
2015-11-18 18:09:06 -06:00
Gregory Nutt
25251db103
SAME70-Xplained: Has only a single LED and a single push button
2015-11-18 16:45:29 -06:00
Gregory Nutt
1b7d7a53b2
Update submodules
2015-11-18 14:35:24 -06:00
Gregory Nutt
faa9f50e53
Fix several build errors detected by tools/testbuil.sh, most configuration problems
2015-11-18 14:35:08 -06:00
Gregory Nutt
687cea60b3
Add basic support for the SAME70-Xplained board
2015-11-18 13:57:02 -06:00
Gregory Nutt
c154a4a1e2
Add basic support for the SAME70-Xplained board
2015-11-18 13:54:57 -06:00
Gregory Nutt
432395218a
Refress submodule
2015-11-18 11:45:24 -06:00
Gregory Nutt
aa812f3838
SAMV7-XULT: Add an NSH protected build configuration. Untested on initial commit.
2015-11-18 11:45:01 -06:00
Gregory Nutt
67be368aa0
Rfress some configurations
2015-11-18 11:43:30 -06:00
Gregory Nutt
5773e78a16
In protected build, need to specify CPU configuration on GCC command line or we get the wrong libgcc
2015-11-18 11:43:00 -06:00
Gregory Nutt
4579f0c1fc
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:53 -06:00
Gregory Nutt
91a8514774
Add a command to boardctl() to obtain a baord unique ID
2015-11-18 07:31:23 -06:00
Gregory Nutt
5a99735782
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
2015-11-17 16:54:15 -06:00
Gregory Nutt
5937f9930d
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
2015-11-17 16:53:49 -06:00
Wail Khemir
540a3b701a
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 17:09:10 -05:00
Gregory Nutt
45530a77d4
Add support for DS3231 I2C RTC. Untested on initial commit.
2015-11-17 14:07:55 -06:00
Gregory Nutt
3d8d2e23c8
Refresh configuration
2015-11-17 14:06:09 -06:00
Gregory Nutt
c955cdccd9
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
2015-11-16 13:31:02 -06:00
Gregory Nutt
c376e14e88
Refresh Spark configurations
2015-11-16 13:26:31 -06:00
Gregory Nutt
2ae7485a57
Update ChangeLog
2015-11-16 10:47:21 -06:00
Alan Carvalho de Assis
0a3d0ec1f5
configs/stm32f429i-disco/src/stm32_nsh.c file calculated partition boundries based on page block sizes but mtd_partition is expecting calculations based on erase block size. From Alan Carvalho de Assis.
2015-11-16 10:44:54 -06:00
Gregory Nutt
4a7fb2cbc1
binfmt: Cosmetic -- rename binfmt_internal.h to binfmt.h. Move related argument copy logic into new file, binfmt_copyargv.c
2015-11-14 07:29:47 -06:00
Gregory Nutt
06b48e5152
Update README
2015-11-13 15:56:16 -06:00
Gregory Nutt
dae831b7ba
Update README file
2015-11-13 15:13:55 -06:00
Gregory Nutt
2706b4f8aa
mtd_progmem.c: Fix calculation of block size
2015-11-13 09:19:25 -06:00
Gregory Nutt
3fe1196ae8
SAMV71-XULT: Need to call sem_progmem_initialize() before using progmem MTD driver
2015-11-12 16:12:40 -06:00
Gregory Nutt
fdb17620a0
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
2015-11-12 16:03:24 -06:00
Gregory Nutt
d20f61d2a8
SAMV7-XULT: Add support for a character device to access the on-chip FLASH programming memory
2015-11-12 16:02:18 -06:00
Max Neklyudov
d54a39832a
Implement high level DMA infrastructure for serial devices
2015-11-12 14:16:19 -06:00
Paul A. Patience
9cd90f3e6e
Nucleo F303RE: Move C++ initialization from configs to apps/platform
2015-11-12 12:10:27 -05:00
Gregory Nutt
7fe6200b0f
progmem.h: Clean-up a few comments
2015-11-11 14:30:06 -06:00
Gregory Nutt
c9fc120511
SAMV71-XULT: Allow support for SmartFS again. Problem fixed
2015-11-11 14:28:01 -06:00
Gregory Nutt
2ff1b173f2
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
2015-11-11 08:15:08 -06:00
Gregory Nutt
041089ba5a
Update README
2015-11-10 18:08:21 -06:00
Gregory Nutt
f86ca94798
Update submodule
2015-11-10 17:45:06 -06:00
Gregory Nutt
fbf203bb1f
SAMV71-XULT: Add support for the NXFFS file system on QuadSPI
2015-11-10 17:42:56 -06:00
Gregory Nutt
fa637597a0
Merged in paulpatience/nuttx-boards/nucleo_f303re_uavcan (pull request #16 )
...
Nucleo F303RE: Update UAVCAN configuration
2015-11-10 16:56:45 -06:00
Paul A. Patience
8452f6083a
Nucleo F303RE: Update UAVCAN configuration
2015-11-10 17:38:27 -05:00
Paul A. Patience
6163aea14a
Nucleo F303RE: Update CAN configuration
2015-11-10 16:07:23 -05:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
aca896045c
SAMV71-XULT: Adapt for changes to s24fl_initialize() prototype
2015-11-10 11:31:42 -06:00
Gregory Nutt
2ab0832c26
Smart MTD: fix some outdated logic: geometray erase size is now 32-bits
2015-11-09 09:35:14 -06:00
Gregory Nutt
e85baa6dde
SAMV7-XULT: If no file system is specified for the S25FL1, wrap it as a character device
2015-11-09 09:33:41 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Gregory Nutt
aae9b2b40c
Update README
2015-11-07 11:47:38 -06:00
Gregory Nutt
2b8ecb042b
Fix naming of Spansion device, s25fl1 not st25fl1
2015-11-07 11:30:24 -06:00
Gregory Nutt
b2bdba0824
S25FL1 FLASH driver: Fix return value from the bwrite() method
2015-11-07 11:26:53 -06:00
Gregory Nutt
f2b3b65456
SAMV7-XULT: Update README
2015-11-07 11:25:58 -06:00
Gregory Nutt
8b0a5955fd
Update submodule
2015-11-05 11:27:00 -06:00
Gregory Nutt
4a28ff1abb
SAMV71-XULT: Add support for SmartFS on QuadFLASH
2015-11-05 11:26:30 -06:00
Gregory Nutt
bfeef77f1f
SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard
2015-11-05 11:25:39 -06:00
Paul A. Patience
f9ef91d180
Nucleo F303RE: Add ADC
2015-11-05 10:17:15 -05:00
Gregory Nutt
6cfad17602
Update submodules
2015-11-01 17:45:48 -06:00
Gregory Nutt
c8ee1c2061
STM32F429i-Discovery: Need to add pin disambiguation due to changes to pinmap header files
2015-11-01 17:40:30 -06:00
Gregory Nutt
8b9cbc05f6
Merged in paulpatience/nuttx-boards/nucleo_f303re_pwm (pull request #13 )
...
Nucleo F303RE: Add PWM
2015-11-01 16:53:14 -06:00
Gregory Nutt
936c208af4
Renaming for better consistency
2015-11-01 16:26:50 -06:00
Gregory Nutt
109b4f496a
Fix some errors introduced into the Mirtoo configuration in the last commits
2015-11-01 16:26:41 -06:00
Paul A. Patience
ae748393ce
Nucleo F303RE: Add PWM
2015-11-01 17:13:03 -05:00
Gregory Nutt
56ad07f02b
Add standard naming for board user LED functions
2015-11-01 12:48:13 -06:00
Gregory Nutt
9743e5997e
Mark function as static
2015-11-01 12:47:19 -06:00
Gregory Nutt
b28bd72a48
Standardize naming of user LEDs interface functions
2015-11-01 12:45:58 -06:00
Gregory Nutt
f56ed529e5
Remove prototypes for all user LED interfaces from board.h header files
2015-11-01 10:53:34 -06:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Gregory Nutt
081fa3e0ec
Update submodules
2015-10-18 08:15:39 +08:00
Gregory Nutt
d0c332b5c9
Add file missed in last commit
2015-10-18 08:03:17 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
Alan Carvalho de Assis
82bc95c340
Add board config to support MAX6675
2015-10-18 07:54:21 +08:00
Gregory Nutt
f5f69ef85d
Add a file missed in the last commit
2015-10-13 07:36:46 -06:00
Alan Carvalho de Assis
f2d07ad135
STM32F4-Discvovery: Add low level support for the Zero Cross driver. From Alan Carvalho de Assis
2015-10-13 07:35:09 -06:00
Gregory Nutt
838f9e5a18
TMPFS: Fix yet another bug
2015-10-10 17:04:38 -06:00
Gregory Nutt
d6fa78a1b0
TMPFS: Fixes several bugs
2015-10-10 15:26:07 -06:00
Gregory Nutt
796d52b3e1
Fix a typo introduced with last commits
2015-10-10 12:24:31 -06:00
Paul A. Patience
a778cb3a49
STM32F4-Discovery: Configure CAN2 GPIOs if UAVCAN uses two interfaces
2015-10-08 15:49:52 -04:00
Paul A. Patience
dd468add8a
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in stm32_boardinitialize() instead of in board_app_initialize()
2015-10-08 13:18:32 -04:00
Gregory Nutt
79d554939e
sched/: Fix some spacing issues
2015-10-07 19:59:14 -06:00
Paul A. Patience
06a88178af
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize
2015-10-06 23:49:28 -04:00
Paul A. Patience
6a94d0e45a
STM32F4-Discovery: Add SSD1351 SPI 4-wire interface
2015-10-06 19:05:32 -04:00
Gregory Nutt
bb05de4b6e
Remove TABs
2015-10-04 16:01:21 -06:00
Gregory Nutt
ef5959a9d1
Remove TABs
2015-10-04 16:01:02 -06:00
Gregory Nutt
af086c40ff
Remove dangling whitespace
2015-10-04 15:28:54 -06:00
Gregory Nutt
fc58f7e538
Remove dangling whitespace
2015-10-04 15:28:03 -06:00
Gregory Nutt
0b12dbf95d
Fix some spacing problems
2015-10-04 15:04:00 -06:00
Gregory Nutt
b6930e442b
Fix some spacing problems
2015-10-04 14:59:44 -06:00
Gregory Nutt
863ded3584
Standardize the width of all comment boxes in C header files
2015-10-03 07:45:15 -06:00
Gregory Nutt
2b88bc7119
Standardize the width of all comment boxes in C header files
2015-10-03 07:41:15 -06:00
Gregory Nutt
16b32bbadd
Standardize the width of all comment boxes in C files
2015-10-03 07:25:53 -06:00
Gregory Nutt
f696caa6f4
Standardize the width of all comment boxes in C files
2015-10-03 07:25:23 -06:00
Gregory Nutt
0f90500f72
Standardize the width of all comment boxes in header files
2015-10-02 17:48:24 -06:00
Gregory Nutt
6cb20d3fba
Standardize the width of all comment boxes in header files
2015-10-02 17:47:56 -06:00
Gregory Nutt
5b51a9fcdd
Standardize the width of all comment boxes in C files
2015-10-02 17:43:18 -06:00
Gregory Nutt
e6e46f830b
Standardize the width of all comment boxes in C files
2015-10-02 17:43:08 -06:00
Gregory Nutt
ac394041bf
Standardize nameing of the pre-processor definitiongs group header
2015-10-02 14:17:29 -06:00
Gregory Nutt
85aaed9ef4
Standardize nameing of the pre-processor definitiongs group header
2015-10-02 14:15:59 -06:00
Gregory Nutt
2ba224eca2
Add support for bsearch() in C library
2015-10-02 12:33:58 -06:00
Gregory Nutt
4c40db9586
Trivial changes from code review
2015-10-02 11:31:27 -06:00
Gregory Nutt
4cf28dff1d
Prep for the 7.12 release
2015-10-01 13:10:49 -06:00
Gregory Nutt
5caa89bf31
Update a README file
2015-10-01 13:09:32 -06:00
Gregory Nutt
49871dde15
Update submodules
2015-10-01 11:09:56 -06:00
Gregory Nutt
3640042be8
Various fixes for compilation issues found by tools/testbuild.sh
2015-10-01 11:08:07 -06:00
Gregory Nutt
0b3a83e0ea
Update submodules
2015-10-01 10:01:20 -06:00
Gregory Nutt
b863ad355a
Refresh an incorrect, hand modified configuration
2015-10-01 10:01:00 -06:00
Gregory Nutt
4cd57e1e4e
Work queues: Logic that sets the queued indication and the logic that does the actual queuing must be atomic
2015-09-30 11:04:29 -06:00
Gregory Nutt
2c791634c6
Merged in paulpatience/nuttx-boards (pull request #9 )
...
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
2015-09-29 16:29:45 -06:00
Gregory Nutt
cf9100f917
Upate submodules
2015-09-29 16:10:35 -06:00
Gregory Nutt
fe8c622d1d
Update READMEs again; NSH init thread priority should default to some value less then 100
2015-09-29 16:09:22 -06:00
Paul A. Patience
c08e4e582c
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
2015-09-29 16:00:25 -04:00
Gregory Nutt
d70bd7cc2e
Update READMEs; refresh some configurations
2015-09-29 13:48:55 -06:00
Gregory Nutt
2c7c034baf
Update README, ChangeLog, and submodules
2015-09-29 09:22:39 -06:00
Gregory Nutt
a9dfb1e453
Update README
2015-09-29 09:21:41 -06:00
Gregory Nutt
f28e0ce95c
Back out bad change in last merge
2015-09-29 08:19:17 -06:00
pkolesnikov
97a05279f3
lpc4370-link2
2015-09-29 15:53:49 +02:00
Gregory Nutt
3d3a60ee1b
Update submodules
2015-09-29 07:31:49 -06:00
Gregory Nutt
79ef94a938
STM32F4-Discovery: Add support for the NSH network initialization thread in the netnsh configuration. Attempted to enable the networking monitor as well, but it turns out that the PHY interrupt is not supported with the STM32F4-DISBB base board
2015-09-28 10:58:47 -06:00
Gregory Nutt
e3d64722f0
SAMV71-XULT: Add Network monitor to netnsh configuration
2015-09-28 09:09:48 -06:00
Gregory Nutt
9cc454ca0a
Set non-zero task name sizes in several configurations
2015-09-28 08:36:18 -06:00
Gregory Nutt
9125e89e68
Add commented out path to the ARM GNU toolchain in setenv.sh files
2015-09-26 09:09:41 -06:00
Gregory Nutt
35f8580915
Updata submodule
2015-09-26 08:52:04 -06:00
Gregory Nutt
d86a9c9691
Refresh some configurations
2015-09-26 08:40:57 -06:00
Gregory Nutt
4f60d78d56
SAMV71-XULT: Add support for the NSH network monitor
2015-09-25 10:14:40 -06:00
Gregory Nutt
0ed7ddb8a4
Update submodules
2015-09-24 14:53:50 -06:00
Gregory Nutt
94a014085a
Update the simulator README.txt file
2015-09-24 14:53:30 -06:00
Alan Carvalho de Assis
9f465fc502
Rename battery.[ch] to battery_gauge.[ch]
2015-09-19 11:00:14 -06:00
pnb
508a55f6be
STM32F4Discovery: Should not include STM32 internal files when building for application
2015-09-19 07:56:50 -06:00
Gregory Nutt
71d5cff0dd
Update submodules
2015-09-18 12:48:05 -06:00
Gregory Nutt
4fd4a3b383
Minor style: # if pre-processor command should be in columnn 1
2015-09-18 12:47:32 -06:00
Stefan Kolb
983128e16a
sscanf: Formats a, A, e, E, g, and G should be treated the same as f and F
2015-09-17 07:41:33 -06:00
Gregory Nutt
08498b40de
Update README.txt
2015-09-16 16:23:25 -06:00
Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Alan Carvalho de Assis
9d490482d8
Configure stm32f4discovery board to support MAX31855 driver
2015-09-13 15:50:02 -06:00
Gregory Nutt
8a9fe183e3
Update README and comments
2015-09-13 15:46:31 -06:00
Gregory Nutt
24b0a56796
Refresh submodules
2015-09-11 14:56:18 -06:00
Gregory Nutt
80c113d0f5
SAMA5D2-XULT: Add Flexcom pin disambiguation
2015-09-11 14:55:52 -06:00
Gregory Nutt
3770ac7512
SAMA5D-XULT: A few more fixes for evolving SAMA5D2 port
2015-09-11 14:33:29 -06:00
Gregory Nutt
ce27334f23
Refresh sub-modules
2015-09-11 14:32:07 -06:00
Paul A. Patience
272ab8c090
Fix typo
2015-09-10 21:20:53 -04:00
Gregory Nutt
cce73fc1b0
SAMA5D2-XULT: Fix LED PIO definitions; Update README; Remove NSH startup script
2015-09-10 13:46:18 -06:00
Gregory Nutt
a9c6ec2b13
Merged in paulpatience/nuttx-boards (pull request #6 )
...
Nucleo F303RE: add more pins and update copyright notices
2015-09-10 13:22:52 -06:00
Gregory Nutt
264f3bea65
Update README file
2015-09-10 13:08:32 -06:00
Gregory Nutt
ed0d480d3e
Update submodules
2015-09-10 13:07:32 -06:00
Gregory Nutt
a1974edec5
SAMA5D2-XULT: Need to be more careful in board header file: It is included by assembly files
2015-09-10 13:06:31 -06:00
Paul A. Patience
10297a0b6a
Nucleo F303RE: add more pins and update copyright notices
2015-09-10 13:34:17 -04:00
Gregory Nutt
f0a79f0a74
LPC43 board.h files: Settings needed in lpc43_cpu.c
2015-09-10 08:15:50 -06:00
Gregory Nutt
c74b86c45e
Update SAMA5D2 README
2015-09-10 07:26:06 -06:00
Gregory Nutt
5c144f704f
Update README
2015-09-10 07:05:42 -06:00
Paul A. Patience
bf6163bec6
Add Nucleo F303RE board configuration
2015-09-10 05:26:38 -04:00
Gregory Nutt
5058ed3ef4
Only build shutdown if CONFIG_NET=y. The warning is pretty annoying
2015-09-09 12:14:04 -06:00
Gregory Nutt
4551d98a0b
SAMA5D2-XULT: Does not have USART0-4; Fix some compile issues
2015-09-09 12:13:22 -06:00
Gregory Nutt
c63e2f1e9e
sync submodules
2015-09-08 14:19:13 -06:00
Gregory Nutt
be1fc59cc5
Olimexino STM32: Fix some build issues
2015-09-08 13:57:55 -06:00
Gregory Nutt
89a23cbb86
Eliminate warning
2015-09-08 13:41:35 -06:00
Gregory Nutt
afdb3c751a
Fix typos from a previous commit
2015-09-08 12:45:30 -06:00
Gregory Nutt
ebf7fe9aae
Eliminate warnings
2015-09-08 12:41:52 -06:00
Gregory Nutt
c99a5d9001
Refresh configuration
2015-09-08 12:08:41 -06:00
Gregory Nutt
bc81762bef
Fix recently introduced typo
2015-09-08 11:37:05 -06:00
Gregory Nutt
366e3d3353
Eliminate warnings
2015-09-08 10:48:57 -06:00
Gregory Nutt
a782eb7e67
Eliminate warning
2015-09-08 10:41:59 -06:00
Gregory Nutt
bb595777fd
Eliminate warnings
2015-09-08 10:21:19 -06:00
Gregory Nutt
37111e6b2c
Eliminate warnings
2015-09-08 10:19:34 -06:00
Gregory Nutt
a7e43c7fdb
Eliminate some warnings
2015-09-08 09:20:18 -06:00
Gregory Nutt
7cf823fa97
Eliminate somw warnings
2015-09-08 09:19:40 -06:00
Gregory Nutt
9cd1e34792
Eliminate a warning
2015-09-08 08:08:46 -06:00
Gregory Nutt
6add91e42d
Spark: Eliminate some warnings
2015-09-08 07:41:37 -06:00
Gregory Nutt
bc46130c70
Rename libc/stdio/lib_avsprintf.c to lib_vasprintf.c
2015-09-07 13:28:00 -06:00
Sebastien Lorquet
f697cbfd0d
Change all references from avsprintf to vasprintf. From Sebastien Lorquet
2015-09-07 13:11:55 -06:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
1cc7a5fc6f
SAMA5D2-XULT: Add support for the single on-board button
2015-09-05 12:42:57 -06:00
Gregory Nutt
cae703e868
Update README and ChangeLog
2015-09-05 12:17:05 -06:00
Gregory Nutt
49bbfbcb3d
Correct copyright data
2015-09-05 12:16:42 -06:00
Gregory Nutt
da484b1934
Add a very basic configuration to support the SAMA5D2 bring-up
2015-09-05 12:13:12 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Gregory Nutt
a3986e4aac
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:59 -06:00
Paul A. Patience
022ec31431
Update copyright notice
2015-09-04 19:46:43 -04:00
Gregory Nutt
b98109c419
Update ChangeLog, README file, and submodules
2015-09-04 16:49:06 -06:00
Gregory Nutt
871063d2b3
Forgot to add a file in the last commit
2015-09-04 16:46:59 -06:00
Paul A. Patience
55d8aee826
Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience"
2015-09-04 16:42:34 -06:00
Gregory Nutt
f44320d2a6
ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes
2015-09-02 10:19:47 -06:00
Paul A. Patience
81268bb75c
Add -Wundef warning flag
2015-09-01 13:19:57 -04:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
34cb87bfd0
SAMV71-XULT: Add logic to initialize the ST24FL1 QuadSPI FLASH
2015-08-31 09:23:38 -06:00
SaeHie Park
a268e0aeb9
Fix a typo from an earlier commit
2015-08-26 18:12:58 -06:00
Gregory Nutt
00f8521e57
Refresh all nettest configuration
2015-08-26 14:36:17 -06:00
Juha Niskanen
70620d3dd6
rivers/rwbuffer: Fix some logic errors
2015-08-26 07:18:50 -06:00
Gregory Nutt
32de036490
Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up
2015-08-25 20:09:12 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
42771a792f
Refresh a configureatin
2015-08-24 13:47:13 -06:00
Gregory Nutt
47bab42498
Update submodules
2015-08-23 17:21:34 -06:00
Pavel Pisa
b67c0e8df6
boardctl: Last change uses DEBUGASSERT and, hence, requires inclusion of assert.h
2015-08-23 16:46:50 -06:00
Gregory Nutt
2e9b81ee83
Update submodule
2015-08-23 12:17:31 -06:00
Gregory Nutt
17b2f07cdb
boardctl: Update for movement of libc/symtab to apps/system
2015-08-23 12:17:10 -06:00
Gregory Nutt
f12692b78f
Extend canned symbol table logic to work in protected build mode
2015-08-23 10:44:04 -06:00
Gregory Nutt
c2d10cf875
boardctl(): Add support for the BOARDIOC_SYMTAB command
2015-08-23 10:25:25 -06:00
Gregory Nutt
16294a0963
Refresh some configurations
2015-08-23 09:21:29 -06:00
Gregory Nutt
64cff54894
Upate submodules
2015-08-22 10:16:51 -06:00
Gregory Nutt
f3f45a8fd8
Update README
2015-08-22 10:14:36 -06:00
Gregory Nutt
0b2fbd7a2c
Fix a DEBUGASSERTion
2015-08-21 12:33:14 -06:00
Gregory Nutt
435277ed3a
Update README
2015-08-21 12:32:34 -06:00
Gregory Nutt
2a81a76c33
Update ChangeLog
2015-08-20 07:56:20 -06:00
Pavel Pisa
c0881c36a3
Do not (re)define CONFIG_LPC17_SDRAM_32BIT to not conflict with config. If CONFIG_LPC17_SDRAM_16BIT it is defined anyway and with correct symbol redefinition suppression. From Pavel Pisa.
2015-08-20 07:55:02 -06:00
Gregory Nutt
470a95aa4f
Update submodule
2015-08-18 13:24:47 -06:00
Gregory Nutt
f4b35662ec
Trivial removal of trailing whitespace
2015-08-18 13:24:24 -06:00
Gregory Nutt
02306044b2
boardctl.h: Extended boardctl() commands with BOARDIOC_CAN_INITIALIZE
2015-08-18 13:23:34 -06:00
Gregory Nutt
88660657c2
Rename can_devinit() to board_can_initialize(). Hook in to boardctl() with BOARDIOC_CAN_INITIALIZE
2015-08-18 13:21:45 -06:00
Gregory Nutt
a987379e64
Add an error bit to the CAN message report
2015-08-18 07:27:00 -06:00
Gregory Nutt
bc9b901e13
Update README
2015-08-18 07:24:37 -06:00
Gregory Nutt
77f5c34af0
Fix some common typos
2015-08-16 11:00:30 -06:00
Gregory Nutt
4a0f89168a
SAMV71-XULT: Update README
2015-08-16 10:59:35 -06:00
Gregory Nutt
b2a2176123
Refresh submodules
2015-08-11 12:30:06 -06:00
Gregory Nutt
33664a3451
SAMV71-XULT: Add discussion of the SPI slave driver in the README file
2015-08-11 09:30:52 -06:00
Gregory Nutt
7791b2a62e
Refresh submodules + Update comments in SPI slave header file
2015-08-11 08:34:16 -06:00
Gregory Nutt
e3097a6028
Updte SAMV71-XULT README file
2015-08-11 07:52:20 -06:00
Gregory Nutt
7317f3bd88
Refresh modules; trival change to comments in header file
2015-08-09 09:49:49 -06:00
Gregory Nutt
b90f4a1299
Add stub SPI support for the SAMV71-XULT
2015-08-09 09:40:03 -06:00
Gregory Nutt
6f17af4b6f
Refresh all SAMV7 configurations
2015-08-09 09:20:29 -06:00
Gregory Nutt
0dd273935a
Standardize naming of all SLIP configuration options
2015-08-06 15:08:15 -06:00
Gregory Nutt
2e25cd0639
Standardize naming of all SLIP configuration options
2015-08-06 15:07:57 -06:00
Gregory Nutt
9a347f135a
Update submodules
2015-08-05 09:17:27 -06:00
Gregory Nutt
3cb9af4dd9
Update README
2015-08-05 09:16:56 -06:00
Gregory Nutt
a17d6e26a1
Update submodules
2015-08-05 08:22:26 -06:00
Gregory Nutt
b80d9daf36
Update a README file
2015-08-05 08:21:50 -06:00
Gregory Nutt
e3decca82c
Cosmetic update to some comments
2015-08-05 08:07:58 -06:00
Gregory Nutt
6f0cbfbd64
SAMV71-XULT: Add support for MCAN1 loopback test
2015-08-05 08:05:26 -06:00
Gregory Nutt
d0a852c979
Update submodules
2015-07-31 12:10:24 -06:00
Gregory Nutt
81dcadf70a
Add a fiew more SAMV7 clocking definitions
2015-07-31 11:17:26 -06:00
Gregory Nutt
f2555a986e
Update submodules
2015-07-31 08:40:58 -06:00
Gregory Nutt
650ba80ac0
All setenv.sh files updated to use the path to the ARM 4.0 2015q2 toolchain
2015-07-31 08:40:40 -06:00
Gregory Nutt
a4df1c4482
Update submodules
2015-07-31 07:18:33 -06:00
Gregory Nutt
3669292024
Cosmetic changes from review of pull request
2015-07-31 07:17:07 -06:00
Gregory Nutt
22fec589a2
Updates from review of pull request
2015-07-31 06:15:50 -06:00
Gregory Nutt
53005502f6
Merged in rnouse/nuttx-boards (pull request #2 )
...
Make FTMAC100 driver clear of board specific low-level functions
2015-07-31 06:12:37 -06:00
Anton D. Kachalov
5c413b3a66
Setup IRQ Level/Mode outside of FTMAC100 driver
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:09:07 +03:00
Anton D. Kachalov
66eacd32ce
Add flat tools
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:08:53 +03:00
Anton D. Kachalov
e1cb28f4ac
Enable TCP_BACKLOG, DRIVER_POLLING
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:06:04 +03:00
Gregory Nutt
3166af395d
Refresh submodules
2015-07-30 12:58:22 -06:00
Gregory Nutt
85b0c705e8
Add support for tab-completions in the sim/nsh configuration
2015-07-30 12:15:03 -06:00
Gregory Nutt
fb82061bf7
Two more places there THRE is used with inverted sense
2015-07-29 20:42:49 -06:00
Gregory Nutt
2dbb153559
Moxa: Needs to select some architecture. Is ARM7TDMI close?
2015-07-29 20:41:55 -06:00
Gregory Nutt
789f3d2768
Update submodules
2015-07-29 17:43:27 -06:00
Gregory Nutt
9cc0078640
Remove a .orig file that was accidentally committed
2015-07-29 16:57:14 -06:00
Gregory Nutt
6333da6678
Remove bogus README.txt file
2015-07-29 16:56:00 -06:00
Gregory Nutt
8935ff34d5
16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov
2015-07-29 16:31:21 -06:00
Gregory Nutt
ee84e74448
Moxa: Use prototype in include/nuttx/net/ftmac100.h; set a configuration option to indicate that the 16550 THRE LSR biut is inverted
2015-07-29 16:27:32 -06:00
Gregory Nutt
80d934406f
Update ChangeLog; refresh submodules
2015-07-29 14:13:31 -06:00
Gregory Nutt
504691ae6a
Updates from review of last pull request
2015-07-29 14:12:15 -06:00
Anton D. Kachalov
fbe5268d1a
[moxa/nsh/defconfig] Update default config
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
037332cafe
[moxa/src] Pass interface number to the ftmac100_initialize
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
2c12bc56ac
[moxart/nsh] Set RX/TX queues to 64/32 resp.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
764435cd34
Add support for MoxaRT
2015-07-29 19:11:56 +03:00
Gregory Nutt
7c32a1aa9b
Refresh submodule
2015-07-28 07:29:25 -06:00
Gregory Nutt
5c483d1f44
Refresh configuration
2015-07-28 07:28:54 -06:00
Gregory Nutt
5052e19563
Refresh submodule
2015-07-27 08:38:58 -06:00
Gregory Nutt
e8cff045f8
Correct name of sporadic scheduler hooks
2015-07-27 08:38:38 -06:00
Gregory Nutt
484f148001
Sporadic scheduler: Add instrumentation hooks to support GPIO outputs
2015-07-27 08:37:25 -06:00
Gregory Nutt
0240bd35fb
STM32F7: Add hooks to monitor/test the sporadic scheduler
2015-07-27 08:20:42 -06:00
Gregory Nutt
ab37a759d8
Eliminate a warning detected by nuttx/tools/testbuild.sh
2015-07-22 14:11:25 -06:00
Gregory Nutt
8c6c00898d
Eliminate a warning detected by nuttx/tools/testbuild.sh
2015-07-22 14:09:56 -06:00
David Sidrane
e5a9919c8d
Make some STM32F7 pin naming more consistent
2015-07-21 15:33:56 -06:00
Gregory Nutt
8451cbc3cd
Update README
2015-07-21 15:32:57 -06:00
Gregory Nutt
2a7416238a
Syscall fixes: Add support for Cortex-M7; mount syscall has to be suppressed if there are no mountable file systems
2015-07-21 11:20:46 -06:00
Gregory Nutt
796cb1e13c
STM32F746G-Disco: Add support for a protected build. C++ initialization logic moved to apps/platform where it belongs
2015-07-21 11:16:44 -06:00
Gregory Nutt
dd3e1e7d21
STM32 F7: Port some F4 protected mode files to the F7
2015-07-21 07:59:20 -06:00
Gregory Nutt
03ab4e8c75
Update README.txt file
2015-07-21 07:58:02 -06:00
Gregory Nutt
37b956f83d
STM32 F7 Ethernet: With these last changes, the STM32 F7 Ethernet driver is functional
2015-07-20 10:57:06 -06:00
Gregory Nutt
2e09cf3112
STM32F746-DISCO: Enable the NSH telnet sessions
2015-07-20 10:54:47 -06:00
Gregory Nutt
9276e4d23a
Refresh submodules; upated STM22F3 Ethernet debug output
2015-07-20 09:31:49 -06:00
Gregory Nutt
784a3eb4d0
STM32F746G-DISCO: Fixe some problems in Ethernet configuration
2015-07-20 09:29:45 -06:00
Gregory Nutt
32aa2e937e
Update ChangeLog
2015-07-20 07:25:13 -06:00
Alan Carvalho de Assis
04b777cb9a
configs/stm32f4discovery/: Add support to BMP180 driver on STM32F4Discovery. From Alan Carvalho de Assis.
2015-07-20 07:22:01 -06:00
Gregory Nutt
e2a62ac814
STM32 F7 Ethernet: RX/TX descriptors should be flushed to memory when they are first initialized
2015-07-20 07:05:35 -06:00
Gregory Nutt
08b491d18c
STM32F746G-DISCO: In netnsh configuration, software needs to assign a MAC address
2015-07-19 17:11:27 -06:00
Gregory Nutt
05a2c82409
Update submodules
2015-07-19 14:14:06 -06:00
Gregory Nutt
ba105349a4
STM32F746G-DISCO: Add a network-enabled NSH configuratino for network testing
2015-07-19 14:13:26 -06:00
Gregory Nutt
4b9b7589b9
STM32 F7: Add logic to enable I-/D-Cache, ITCM and DTCM
2015-07-19 10:43:26 -06:00
Gregory Nutt
4cb2464e77
STM32 F7 disco: Enabled I-/D-Cache, DTCM, recallibrate delay loop. Update README.txt
2015-07-19 10:40:32 -06:00
Gregory Nutt
ac7bbbc601
STM32 F7 Disco: Calibrate delay loop
2015-07-19 09:59:09 -06:00
Gregory Nutt
0b581944b9
STM32 F7: Port the STM32 F3 serial driver to the STM32 F7
2015-07-19 09:25:27 -06:00
Gregory Nutt
98f62d23d5
STM32 F7: Refresh configuration
2015-07-19 09:24:52 -06:00
Gregory Nutt
5c76329d2e
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
Gregory Nutt
9a1df49096
STM32F746G-DISCO: Add FLASH wait states and USART6 pin mapping to board.h
2015-07-18 11:54:44 -06:00
Gregory Nutt
07d5b6d5bc
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
2434baea9d
STM32F746G-DISCO: linker script needs EXTERN(_vectors) if linking with CONFIG_ARMv7M_CMNVECTOR=y
2015-07-17 16:37:52 -06:00
Gregory Nutt
7af567b9e2
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
d69cc38fe1
STM32F746G-DISCO: Fix a couple of compilation problems
2015-07-17 15:42:40 -06:00
Gregory Nutt
1a85720d42
STM32F745G-DISCO: Update PLL configuration to get 216MHz
2015-07-17 15:17:56 -06:00
Gregory Nutt
dac4a67c7b
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
8b294b5a8b
STM32 F7: Temporary build workarounds for missing header files
2015-07-17 13:51:11 -06:00
Gregory Nutt
a314561474
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Gregory Nutt
869daffefa
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:46:15 -06:00
Gregory Nutt
50897b7a64
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
1b341a30d8
STM32 F7: Update configuration variable naming
2015-07-16 19:48:39 -06:00
Gregory Nutt
55cbf843b8
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
04ed5d2b76
Update STM32 F7 defconfig
2015-07-16 18:29:40 -06:00
Gregory Nutt
27f6509022
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:43:25 -06:00
Gregory Nutt
0850780a03
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:41:40 -06:00
Gregory Nutt
4bcd13eabd
Add RGB blending logic needed to support anti-aliasing
2015-07-14 07:57:54 -06:00
Gregory Nutt
bcee1434b6
Refresh configuration
2015-07-14 07:56:07 -06:00
Gregory Nutt
d8da7009c6
Refresh submodules
2015-07-12 14:13:38 -06:00
Gregory Nutt
75595ddfef
Remove refereneces to DNSCLIENT IPv4/IPv6
2015-07-12 14:13:18 -06:00
Gregory Nutt
14dedf3dea
Refresh submodules
2015-07-11 08:16:26 -06:00
Gregory Nutt
58f21e7621
Fix a typo in a README file
2015-07-11 08:16:07 -06:00
Gregory Nutt
e69d14d89b
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Gregory Nutt
2fb2bd0f99
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:40:49 -06:00
Gregory Nutt
7df472031d
Refresh configurations
2015-07-10 18:39:59 -06:00
Gregory Nutt
1dfb94bc8f
Update submodules
2015-07-10 13:31:02 -06:00
Gregory Nutt
6b506fd5f4
Refresh a configuration
2015-07-10 13:30:24 -06:00
Gregory Nutt
4102470bdd
Move the DNS server from apps/netutils/dnsclient to nuttx/libc/netdb. Move netdb functions from libc/net to libc/netdb. Fix up naming to reflect the repartitioning
2015-07-10 12:11:40 -06:00
Gregory Nutt
42f69ba42f
Rename CONFIG_NETUTILS_DNS* to CONFIG_NETDB_DNS* to reflect the movement of the DNS server from apps/netutils to nuttx/libc/netdb
2015-07-10 12:09:58 -06:00
Gregory Nutt
59cc4a7a7b
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
...
The solution is to remove all of the memory management function calls from the interface. Instead, the interface exports the userspace heap structure and then kernel size implementations of those memory management functions will operate on the userspace heap structure. This avoids the unnecessary system calls and, more importantly, failures do to freeing memory when a test exits.
2015-07-10 08:37:02 -06:00
Gregory Nutt
dcb2b2077f
Update protected build logic for all platforms that supported the protected build. This is necessary due to changes in the definition of the userspace interface
2015-07-10 08:35:36 -06:00
Gregory Nutt
47148fb4c8
Refresh configuration
2015-07-10 08:34:35 -06:00
Gregory Nutt
f94fe747ae
Undo part of a previous change. Move get/sethostname back from net/netdb to libc/unistd
2015-07-08 11:11:52 -06:00
Gregory Nutt
babbd4438c
SAMD21-Xplained: Refresh configuration and update status in README
2015-07-06 11:08:07 -06:00
Gregory Nutt
5f2a181599
Add conditional definition for MIN macro needed in last commit
2015-07-05 09:08:45 -06:00
Gregory Nutt
a5e185569d
Refresh configuration
2015-07-05 09:06:57 -06:00
Gregory Nutt
6576672e09
uname: version string must hold 40 character value; strings returned by uname must always be NUL terminated
2015-07-05 06:46:00 -06:00
Gregory Nutt
04b73b58a8
Add a name string for custom boards. Used onlyby uname()
2015-07-05 06:44:06 -06:00
Gregory Nutt
ffd0d12b04
Refresh submodules
2015-07-04 15:21:48 -06:00
Gregory Nutt
f7ba1b1eeb
Remove all references to the dedunct CONFIG_SYSTEM_SYSINFO configuration from all defconfig files
2015-07-04 15:19:11 -06:00
Gregory Nutt
772bcb845e
Refresh submodules
2015-07-04 12:47:07 -06:00
Gregory Nutt
f652c770cd
Refresh configuration
2015-07-04 12:46:50 -06:00
Gregory Nutt
049224f544
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
70b6085927
Add support for a BOARDIOC_RESET boardctl() command
2015-07-04 10:36:47 -06:00
Gregory Nutt
48dee66356
Remove obsoleted CONFIG_SYSTEM_POWEROFF from configurations. The NSH shutdown command should be available instead
2015-07-04 09:05:59 -06:00
Gregory Nutt
b1e9b0026d
Refresh submodules
2015-07-04 08:18:30 -06:00
Gregory Nutt
2760ca1cda
Enable CONFIG_BOARD_POWEROFF=y. Now you can use the NSH shutdown command to terminate the NSH session
2015-07-04 08:17:40 -06:00
Gregory Nutt
8be9b1071c
Update submodules
2015-07-04 07:25:12 -06:00
Gregory Nutt
149fc3f79e
Update README
2015-07-04 07:24:35 -06:00
Gregory Nutt
ee21a3ad77
Update submodule configs
2015-07-03 15:45:26 -06:00
Gregory Nutt
c862f1fe59
Refresh SAMD21-Xplained Configuration
2015-07-03 15:45:04 -06:00
Gregory Nutt
be09a87c0e
SST25: Eliminate some warnings
2015-07-03 14:38:33 -06:00
Gregory Nutt
f6e749452e
Refresh/fix broken configurations
2015-07-03 14:35:10 -06:00
Gregory Nutt
a0fba3a5f6
Refresh/fix broken configurations
2015-07-03 12:36:52 -06:00
Gregory Nutt
3e04194edd
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
2015-07-03 09:33:52 -06:00
Gregory Nutt
6a9e986be9
Refresh/fix more broken configurations
2015-07-03 09:33:02 -06:00
Stavros Polymenis
701509f9bd
Add implementations of uname() and gethost(). From Stavros Polymenis.
2015-07-03 07:50:27 -06:00
Gregory Nutt
2b6c679d6b
Refresh configuration
2015-07-03 07:49:53 -06:00
Gregory Nutt
d6eacb3ab5
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:51 -06:00
Gregory Nutt
ec193059c1
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:32 -06:00
Gregory Nutt
c0946bfd7d
Correct some issues introduced in the last commit
2015-07-02 17:54:05 -06:00
Gregory Nutt
21fd1e50f4
Fix some issues introduced in last commit; refresh/fix more broken configurations
2015-07-02 17:53:32 -06:00
Gregory Nutt
27ea02a85f
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:54 -06:00
Gregory Nutt
b3731ca5ca
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:16 -06:00
Gregory Nutt
064b4923c6
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
2015-07-02 16:25:31 -06:00
Gregory Nutt
56e8457d4d
Refresh/fix more broken board configurations
2015-07-02 16:24:32 -06:00
Gregory Nutt
9db4d7da94
STM32 RTCC: Eliminate a warning when ALARM support is enabled
2015-07-02 15:02:59 -06:00
Gregory Nutt
fe8e4ac747
Refresh/Fix more broken configurations
2015-07-02 15:02:14 -06:00
Gregory Nutt
bcb4b6503f
Update configs
2015-07-02 12:20:01 -06:00
Gregory Nutt
0d11695e3f
Refresh/fix more broken configurations
2015-07-02 12:19:16 -06:00
Gregory Nutt
0f0800de25
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
2015-07-02 11:13:23 -06:00
Gregory Nutt
0eb2d9e937
Refresh/fix more broken configurations
2015-07-02 11:11:51 -06:00
Gregory Nutt
7ba6beb38d
Update sub-module configuration
2015-07-01 19:31:08 -06:00
Gregory Nutt
9774ebc568
Fix/update some STR7 configurations
2015-07-01 19:18:51 -06:00
Gregory Nutt
d96365b048
Merge branch 'master' of https://bitbucket.org/nuttx/boards
2015-07-01 18:34:33 -06:00
Gregory Nutt
766269e67d
Use of GPIO is conditioned on CONFIG_ENC238J60
2015-07-01 18:34:23 -06:00
Gregory Nutt
8fa6ecc1b9
Remove a warning
2015-07-01 18:25:13 -06:00
Gregory Nutt
97245f2374
Fix compile error in Olimex STR7 configuration and LPC17xx warning
2015-07-01 18:24:44 -06:00
Gregory Nutt
e909b59fd5
Refresh several configurations. Fix errors and warnings detected by tools/testbuild.sh
2015-07-01 14:34:33 -06:00
Gregory Nutt
c6f56ccf8c
Fix some typos in header files
2015-07-01 11:45:08 -06:00
Gregory Nutt
4b97a5314c
Refresh/fix some more LPC17xx configurations
2015-07-01 11:43:06 -06:00
Gregory Nutt
799205d59b
Refresh configurations; fix some minor build issues
2015-07-01 10:25:46 -06:00
Gregory Nutt
ff389b15ab
LPC17xx: Fix a warning about an unused local variable
2015-07-01 09:36:39 -06:00
Gregory Nutt
89f381723e
Refresh some LPC17xx configurations; fix a few LPC17xx configuration build problems
2015-07-01 09:35:21 -06:00
Gregory Nutt
32e41423e4
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
2015-07-01 08:34:51 -06:00
Gregory Nutt
f5c2d7fbc2
Refresh a configuration
2015-07-01 08:32:45 -06:00
Gregory Nutt
15ca232f9b
Refresh configuration; fix compilation errors if LED support enabled
2015-07-01 08:02:54 -06:00
Gregory Nutt
05575c8e2b
DM320: GIO header uses get/putreg functions and so should include up_arch.h
2015-07-01 08:01:49 -06:00
Gregory Nutt
7632e8b209
Update top-level .gitignore
2015-07-01 07:38:11 -06:00
Gregory Nutt
3f1a9e070d
NTOSD: Update and fix a configuration. The way it was trying to disable the console and file system caused build problems
2015-07-01 07:35:52 -06:00
Gregory Nutt
567b4ff6a4
Update README
2015-06-30 08:11:49 -06:00
Gregory Nutt
3cee0bd5c6
Fix a ultra-trivial typo
2015-06-29 13:22:08 -06:00
Gregory Nutt
2113f4af7b
The configs/ directory is now submodule provided by the boards repository
2015-06-29 13:18:05 -06:00
Gregory Nutt
d1ab9c2e0a
Remove the configs/ directory
2015-06-29 13:12:29 -06:00
Gregory Nutt
205c0978e7
Update ChangeLog
2015-06-29 13:08:42 -06:00
Gregory Nutt
ba2e6ac0b9
Update some URLs due to movement of the Documentation repository
2015-06-29 11:25:03 -06:00
Gregory Nutt
d861375607
Update some URLs due to movement of the Documentation repository
2015-06-29 11:25:03 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
2f9bf6b792
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
63eaa31da2
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
5305100bdc
Change some Sourceforge URLs to bitbucket URLs
2015-06-26 17:29:32 -06:00
Gregory Nutt
d66532971f
Change some Sourceforge URLs to bitbucket URLs
2015-06-26 17:29:32 -06:00
Gregory Nutt
71e8137da1
Fix a typo in configuration variable name: SAMD21 should be SAML21
2015-06-26 13:33:35 -06:00
Gregory Nutt
12f6eb41b2
Fix a typo in configuration variable name: SAMD21 should be SAML21
2015-06-26 13:33:35 -06:00
Gregory Nutt
38ac5e2be3
Fix a typo in configuration variable name: SAM21 should be SAMD21
2015-06-26 13:24:33 -06:00
Gregory Nutt
7613e53b65
Fix a typo in configuration variable name: SAM21 should be SAMD21
2015-06-26 13:24:33 -06:00
Efim Monjak
e187d6eb8b
In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak.
2015-06-26 06:52:37 -06:00
Efim Monjak
5a4bb1714d
In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak.
2015-06-26 06:52:37 -06:00
Gregory Nutt
c1990bb2ea
Update README and TODO list
2015-06-25 13:39:57 -06:00
Gregory Nutt
ce7955bae8
Update README and TODO list
2015-06-25 13:39:57 -06:00
Gregory Nutt
ae729d7a27
Set date to 2015 in all new SAMD21 Xplained files
2015-06-21 12:42:35 -06:00
Gregory Nutt
e615c848fe
Set date to 2015 in all new SAMD21 Xplained files
2015-06-21 12:42:35 -06:00
Gregory Nutt
1afba254b6
Extend apps/examples/unionfs so it is includes a root offset on one of the unified file sysems
2015-06-21 12:21:54 -06:00
Gregory Nutt
8d5cfcfb20
Extend apps/examples/unionfs so it is includes a root offset on one of the unified file sysems
2015-06-21 12:21:54 -06:00
Gregory Nutt
0e98c595c2
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
0546eb7d04
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
476d362986
Updates to SAMD21 Xplained NSH configuration
2015-06-21 07:56:15 -06:00
Gregory Nutt
ad454683bb
Updates to SAMD21 Xplained NSH configuration
2015-06-21 07:56:15 -06:00
Gregory Nutt
fe5f060486
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
c8e6720c62
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
3a4ab48049
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
8750bf0d9a
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
e7bf809c47
configs/sim/nsh: Need larger stack when posix_spawn
2015-06-18 10:59:29 -06:00
Gregory Nutt
d8da1d61ec
configs/sim/nsh: Need larger stack when posix_spawn
2015-06-18 10:59:29 -06:00
Gregory Nutt
612bc18e90
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
deb46613d7
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
317a9c029d
Update README
2015-06-15 11:37:16 -06:00
Gregory Nutt
2782d6be80
Update README
2015-06-15 11:37:16 -06:00
Gregory Nutt
93ac49b403
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
1933260618
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
013e409293
Add start/end LPRAM symbols. We might need to use the _elpram symbol if we want to add some LPRAM to heap
2015-06-14 08:57:47 -06:00
Gregory Nutt
4d4d96cb2f
Add start/end LPRAM symbols. We might need to use the _elpram symbol if we want to add some LPRAM to heap
2015-06-14 08:57:47 -06:00
Gregory Nutt
b1154a4a42
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
6b8ae61dad
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
19bbebd10e
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
ff966232a5
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
913a5251e5
Refresh configurations
2015-06-12 09:56:14 -06:00
Gregory Nutt
2085d6a7fa
Refresh configurations
2015-06-12 09:56:14 -06:00
Gregory Nutt
82e1473614
Teensy-3.1: Calibrate delay loop
2015-06-12 07:44:44 -06:00
Gregory Nutt
86dfb3dd94
Teensy-3.1: Calibrate delay loop
2015-06-12 07:44:44 -06:00
Gregory Nutt
d34477de7b
Teensy-3.1: Fix board LED
2015-06-12 07:37:06 -06:00
Gregory Nutt
12753c632a
Teensy-3.1: Fix board LED
2015-06-12 07:37:06 -06:00
Gregory Nutt
bbdb796350
Fix some garbage left in a README file in a previous commit
2015-06-11 14:44:42 -06:00
Gregory Nutt
ca9f891194
Fix some garbage left in a README file in a previous commit
2015-06-11 14:44:42 -06:00
Gregory Nutt
4f045430ac
Teensy-3.0: Rename Teensy-3.1 linker script; add a new linker script for Teensy-3.0
2015-06-11 12:56:58 -06:00
Gregory Nutt
d08c4948f2
Teensy-3.0: Rename Teensy-3.1 linker script; add a new linker script for Teensy-3.0
2015-06-11 12:56:58 -06:00
Gregory Nutt
9c7ba5122b
With these tweaks to the clocking, the Teensy-3.1 NSH configuration is fully functional
2015-06-11 09:07:35 -06:00
Gregory Nutt
f4e8a5fb1d
With these tweaks to the clocking, the Teensy-3.1 NSH configuration is fully functional
2015-06-11 09:07:35 -06:00
Gregory Nutt
c2e39c107b
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
73f43354a5
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
26a8fc9233
Fix some typos in last commit
2015-06-10 17:22:51 -06:00
Gregory Nutt
af0862e3e7
Fix some typos in last commit
2015-06-10 17:22:51 -06:00
Gregory Nutt
45426598d6
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
de254f6ac3
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
eae8126cb8
Update README
2015-06-10 15:19:29 -06:00
Gregory Nutt
63226728b6
Update README
2015-06-10 15:19:29 -06:00
Gregory Nutt
5891bd27ad
Typo fix
2015-06-10 12:31:42 -06:00
Gregory Nutt
d519436eac
Typo fix
2015-06-10 12:31:42 -06:00
Gregory Nutt
2f90912f12
Add support for teensy-3.0
2015-06-10 11:45:53 -06:00
Gregory Nutt
93e0980623
Add support for teensy-3.0
2015-06-10 11:45:53 -06:00
Gregory Nutt
2fb9cc8235
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
bb73c45a61
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
2b97ae04b9
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
85e0da0588
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
9ec96e4382
Updated LPC1115 README from Alan Carvalho de Assis
2015-06-10 06:48:25 -06:00
Gregory Nutt
cc714678d4
Updated LPC1115 README from Alan Carvalho de Assis
2015-06-10 06:48:25 -06:00
Gregory Nutt
bba54ed30a
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
ebad33936f
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
9ffc4c4feb
Oops... console disabled in the Teensy 3.1 configuration
2015-06-09 17:17:56 -06:00
Gregory Nutt
900ceee2b9
Oops... console disabled in the Teensy 3.1 configuration
2015-06-09 17:17:56 -06:00
Gregory Nutt
79248eabf5
Add board support for the Teensy-3.1 board
2015-06-09 17:03:52 -06:00
Gregory Nutt
9036b23392
Add board support for the Teensy-3.1 board
2015-06-09 17:03:52 -06:00
Gregory Nutt
8644eb7868
Rename teensy-3.1 directory to teensy-3.x. Add board.h header file
2015-06-09 15:54:04 -06:00
Gregory Nutt
1acfa1771b
Rename teensy-3.1 directory to teensy-3.x. Add board.h header file
2015-06-09 15:54:04 -06:00
Gregory Nutt
f27161c2b5
Refresh some configurations
2015-06-09 15:19:37 -06:00
Gregory Nutt
27211418ff
Refresh some configurations
2015-06-09 15:19:37 -06:00
Gregory Nutt
0e668f1711
Prep for the NuttX-7.10 Release
2015-06-09 11:33:50 -06:00
Gregory Nutt
8be0822b98
Prep for the NuttX-7.10 Release
2015-06-09 11:33:50 -06:00
Gregory Nutt
10664271eb
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
8967e9715f
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
c09cc0dd07
Update some README files
2015-06-07 10:25:03 -06:00
Gregory Nutt
2225b1642c
Update some README files
2015-06-07 10:25:03 -06:00
Gregory Nutt
207140adb7
Update documentation and README file
2015-06-06 19:16:17 -06:00
Gregory Nutt
219bf39ace
Update documentation and README file
2015-06-06 19:16:17 -06:00
Gregory Nutt
c9a0749142
Lincoln60: Add a thttpd-binfs configuration. That configuration still does not work on initial commit
2015-06-06 19:16:16 -06:00
Gregory Nutt
d908a74089
Lincoln60: Add a thttpd-binfs configuration. That configuration still does not work on initial commit
2015-06-06 19:16:16 -06:00
Gregory Nutt
44a23bd26b
apps/examples/thttpd now uses the Union File System if BINFS is selected for CGI binaris
2015-06-06 19:16:14 -06:00
Gregory Nutt
0c03d04082
apps/examples/thttpd now uses the Union File System if BINFS is selected for CGI binaris
2015-06-06 19:16:14 -06:00
Gregory Nutt
f6a1963219
Add simulator configuration for testing the Union Fs. Fix a few bugs. Almost works but still too flaky
2015-06-05 15:02:24 -06:00
Gregory Nutt
a78224d114
Add simulator configuration for testing the Union Fs. Fix a few bugs. Almost works but still too flaky
2015-06-05 15:02:24 -06:00
Gregory Nutt
086127b24f
Add support for a union file system that can be used to overlay and merge the content of two mounted file systems.
2015-06-05 13:18:06 -06:00
Gregory Nutt
1d370178fb
Add support for a union file system that can be used to overlay and merge the content of two mounted file systems.
2015-06-05 13:18:06 -06:00
Gregory Nutt
97921ca474
Lincoln60: Add GPIO definitions for the microSD slot
2015-06-04 16:58:59 -06:00
Gregory Nutt
1c6c76033a
Lincoln60: Add GPIO definitions for the microSD slot
2015-06-04 16:58:59 -06:00
Gregory Nutt
b62497a416
Lincoln60: Correct size of SRAM in configurations
2015-06-04 07:54:56 -06:00
