Gregory Nutt
7fe6200b0f
progmem.h: Clean-up a few comments
2015-11-11 14:30:06 -06:00
Gregory Nutt
c9fc120511
SAMV71-XULT: Allow support for SmartFS again. Problem fixed
2015-11-11 14:28:01 -06:00
Gregory Nutt
2ff1b173f2
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
2015-11-11 08:15:08 -06:00
Gregory Nutt
041089ba5a
Update README
2015-11-10 18:08:21 -06:00
Gregory Nutt
f86ca94798
Update submodule
2015-11-10 17:45:06 -06:00
Gregory Nutt
fbf203bb1f
SAMV71-XULT: Add support for the NXFFS file system on QuadSPI
2015-11-10 17:42:56 -06:00
Gregory Nutt
fa637597a0
Merged in paulpatience/nuttx-boards/nucleo_f303re_uavcan (pull request #16 )
...
Nucleo F303RE: Update UAVCAN configuration
2015-11-10 16:56:45 -06:00
Paul A. Patience
8452f6083a
Nucleo F303RE: Update UAVCAN configuration
2015-11-10 17:38:27 -05:00
Paul A. Patience
6163aea14a
Nucleo F303RE: Update CAN configuration
2015-11-10 16:07:23 -05:00
Gregory Nutt
965addb397
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
2015-11-10 11:33:35 -06:00
Gregory Nutt
aca896045c
SAMV71-XULT: Adapt for changes to s24fl_initialize() prototype
2015-11-10 11:31:42 -06:00
Gregory Nutt
2ab0832c26
Smart MTD: fix some outdated logic: geometray erase size is now 32-bits
2015-11-09 09:35:14 -06:00
Gregory Nutt
e85baa6dde
SAMV7-XULT: If no file system is specified for the S25FL1, wrap it as a character device
2015-11-09 09:33:41 -06:00
Gregory Nutt
91429433f6
Correct naming of Spansion part. S25FL1, not ST25FL1
2015-11-07 11:51:09 -06:00
Gregory Nutt
aae9b2b40c
Update README
2015-11-07 11:47:38 -06:00
Gregory Nutt
2b8ecb042b
Fix naming of Spansion device, s25fl1 not st25fl1
2015-11-07 11:30:24 -06:00
Gregory Nutt
b2bdba0824
S25FL1 FLASH driver: Fix return value from the bwrite() method
2015-11-07 11:26:53 -06:00
Gregory Nutt
f2b3b65456
SAMV7-XULT: Update README
2015-11-07 11:25:58 -06:00
Gregory Nutt
8b0a5955fd
Update submodule
2015-11-05 11:27:00 -06:00
Gregory Nutt
4a28ff1abb
SAMV71-XULT: Add support for SmartFS on QuadFLASH
2015-11-05 11:26:30 -06:00
Gregory Nutt
bfeef77f1f
SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard
2015-11-05 11:25:39 -06:00
Paul A. Patience
f9ef91d180
Nucleo F303RE: Add ADC
2015-11-05 10:17:15 -05:00
Gregory Nutt
6cfad17602
Update submodules
2015-11-01 17:45:48 -06:00
Gregory Nutt
c8ee1c2061
STM32F429i-Discovery: Need to add pin disambiguation due to changes to pinmap header files
2015-11-01 17:40:30 -06:00
Gregory Nutt
8b9cbc05f6
Merged in paulpatience/nuttx-boards/nucleo_f303re_pwm (pull request #13 )
...
Nucleo F303RE: Add PWM
2015-11-01 16:53:14 -06:00
Gregory Nutt
936c208af4
Renaming for better consistency
2015-11-01 16:26:50 -06:00
Gregory Nutt
109b4f496a
Fix some errors introduced into the Mirtoo configuration in the last commits
2015-11-01 16:26:41 -06:00
Paul A. Patience
ae748393ce
Nucleo F303RE: Add PWM
2015-11-01 17:13:03 -05:00
Gregory Nutt
56ad07f02b
Add standard naming for board user LED functions
2015-11-01 12:48:13 -06:00
Gregory Nutt
9743e5997e
Mark function as static
2015-11-01 12:47:19 -06:00
Gregory Nutt
b28bd72a48
Standardize naming of user LEDs interface functions
2015-11-01 12:45:58 -06:00
Gregory Nutt
f56ed529e5
Remove prototypes for all user LED interfaces from board.h header files
2015-11-01 10:53:34 -06:00
Gregory Nutt
2318038bbc
Rename board_led_off to board_autoled_off
2015-11-01 09:10:40 -06:00
Gregory Nutt
893bd9c7b5
Rename board_led_off to board_autoled_off
2015-11-01 09:10:08 -06:00
Gregory Nutt
8093def2c8
Rename board_led_on to board_autoled_on
2015-11-01 09:07:46 -06:00
Gregory Nutt
78f19bbefb
Rename board_led_on to board_autoled_on
2015-11-01 09:07:36 -06:00
Gregory Nutt
148d5fcffd
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:04:02 -06:00
Gregory Nutt
88c506d843
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:03:01 -06:00
Gregory Nutt
081fa3e0ec
Update submodules
2015-10-18 08:15:39 +08:00
Gregory Nutt
d0c332b5c9
Add file missed in last commit
2015-10-18 08:03:17 +08:00
Gregory Nutt
d8731d0ef1
Add files missed in previous commit
2015-10-18 08:00:06 +08:00
Alan Carvalho de Assis
82bc95c340
Add board config to support MAX6675
2015-10-18 07:54:21 +08:00
Gregory Nutt
f5f69ef85d
Add a file missed in the last commit
2015-10-13 07:36:46 -06:00
Alan Carvalho de Assis
f2d07ad135
STM32F4-Discvovery: Add low level support for the Zero Cross driver. From Alan Carvalho de Assis
2015-10-13 07:35:09 -06:00
Gregory Nutt
838f9e5a18
TMPFS: Fix yet another bug
2015-10-10 17:04:38 -06:00
Gregory Nutt
d6fa78a1b0
TMPFS: Fixes several bugs
2015-10-10 15:26:07 -06:00
Gregory Nutt
796d52b3e1
Fix a typo introduced with last commits
2015-10-10 12:24:31 -06:00
Paul A. Patience
a778cb3a49
STM32F4-Discovery: Configure CAN2 GPIOs if UAVCAN uses two interfaces
2015-10-08 15:49:52 -04:00
Paul A. Patience
dd468add8a
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in stm32_boardinitialize() instead of in board_app_initialize()
2015-10-08 13:18:32 -04:00
Gregory Nutt
79d554939e
sched/: Fix some spacing issues
2015-10-07 19:59:14 -06:00
Paul A. Patience
06a88178af
Nucleo F303RE and STM32F4-Discovery: Configure CAN GPIOs in board_app_initialize
2015-10-06 23:49:28 -04:00
Paul A. Patience
6a94d0e45a
STM32F4-Discovery: Add SSD1351 SPI 4-wire interface
2015-10-06 19:05:32 -04:00
Gregory Nutt
bb05de4b6e
Remove TABs
2015-10-04 16:01:21 -06:00
Gregory Nutt
ef5959a9d1
Remove TABs
2015-10-04 16:01:02 -06:00
Gregory Nutt
af086c40ff
Remove dangling whitespace
2015-10-04 15:28:54 -06:00
Gregory Nutt
fc58f7e538
Remove dangling whitespace
2015-10-04 15:28:03 -06:00
Gregory Nutt
0b12dbf95d
Fix some spacing problems
2015-10-04 15:04:00 -06:00
Gregory Nutt
b6930e442b
Fix some spacing problems
2015-10-04 14:59:44 -06:00
Gregory Nutt
863ded3584
Standardize the width of all comment boxes in C header files
2015-10-03 07:45:15 -06:00
Gregory Nutt
2b88bc7119
Standardize the width of all comment boxes in C header files
2015-10-03 07:41:15 -06:00
Gregory Nutt
16b32bbadd
Standardize the width of all comment boxes in C files
2015-10-03 07:25:53 -06:00
Gregory Nutt
f696caa6f4
Standardize the width of all comment boxes in C files
2015-10-03 07:25:23 -06:00
Gregory Nutt
0f90500f72
Standardize the width of all comment boxes in header files
2015-10-02 17:48:24 -06:00
Gregory Nutt
6cb20d3fba
Standardize the width of all comment boxes in header files
2015-10-02 17:47:56 -06:00
Gregory Nutt
5b51a9fcdd
Standardize the width of all comment boxes in C files
2015-10-02 17:43:18 -06:00
Gregory Nutt
e6e46f830b
Standardize the width of all comment boxes in C files
2015-10-02 17:43:08 -06:00
Gregory Nutt
ac394041bf
Standardize nameing of the pre-processor definitiongs group header
2015-10-02 14:17:29 -06:00
Gregory Nutt
85aaed9ef4
Standardize nameing of the pre-processor definitiongs group header
2015-10-02 14:15:59 -06:00
Gregory Nutt
2ba224eca2
Add support for bsearch() in C library
2015-10-02 12:33:58 -06:00
Gregory Nutt
4c40db9586
Trivial changes from code review
2015-10-02 11:31:27 -06:00
Gregory Nutt
4cf28dff1d
Prep for the 7.12 release
2015-10-01 13:10:49 -06:00
Gregory Nutt
5caa89bf31
Update a README file
2015-10-01 13:09:32 -06:00
Gregory Nutt
49871dde15
Update submodules
2015-10-01 11:09:56 -06:00
Gregory Nutt
3640042be8
Various fixes for compilation issues found by tools/testbuild.sh
2015-10-01 11:08:07 -06:00
Gregory Nutt
0b3a83e0ea
Update submodules
2015-10-01 10:01:20 -06:00
Gregory Nutt
b863ad355a
Refresh an incorrect, hand modified configuration
2015-10-01 10:01:00 -06:00
Gregory Nutt
4cd57e1e4e
Work queues: Logic that sets the queued indication and the logic that does the actual queuing must be atomic
2015-09-30 11:04:29 -06:00
Gregory Nutt
2c791634c6
Merged in paulpatience/nuttx-boards (pull request #9 )
...
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
2015-09-29 16:29:45 -06:00
Gregory Nutt
cf9100f917
Upate submodules
2015-09-29 16:10:35 -06:00
Gregory Nutt
fe8c622d1d
Update READMEs again; NSH init thread priority should default to some value less then 100
2015-09-29 16:09:22 -06:00
Paul A. Patience
c08e4e582c
Nucleo F303RE: Add SSD1351 SPI 4-wire interface
2015-09-29 16:00:25 -04:00
Gregory Nutt
d70bd7cc2e
Update READMEs; refresh some configurations
2015-09-29 13:48:55 -06:00
Gregory Nutt
2c7c034baf
Update README, ChangeLog, and submodules
2015-09-29 09:22:39 -06:00
Gregory Nutt
a9dfb1e453
Update README
2015-09-29 09:21:41 -06:00
Gregory Nutt
f28e0ce95c
Back out bad change in last merge
2015-09-29 08:19:17 -06:00
pkolesnikov
97a05279f3
lpc4370-link2
2015-09-29 15:53:49 +02:00
Gregory Nutt
3d3a60ee1b
Update submodules
2015-09-29 07:31:49 -06:00
Gregory Nutt
79ef94a938
STM32F4-Discovery: Add support for the NSH network initialization thread in the netnsh configuration. Attempted to enable the networking monitor as well, but it turns out that the PHY interrupt is not supported with the STM32F4-DISBB base board
2015-09-28 10:58:47 -06:00
Gregory Nutt
e3d64722f0
SAMV71-XULT: Add Network monitor to netnsh configuration
2015-09-28 09:09:48 -06:00
Gregory Nutt
9cc454ca0a
Set non-zero task name sizes in several configurations
2015-09-28 08:36:18 -06:00
Gregory Nutt
9125e89e68
Add commented out path to the ARM GNU toolchain in setenv.sh files
2015-09-26 09:09:41 -06:00
Gregory Nutt
35f8580915
Updata submodule
2015-09-26 08:52:04 -06:00
Gregory Nutt
d86a9c9691
Refresh some configurations
2015-09-26 08:40:57 -06:00
Gregory Nutt
4f60d78d56
SAMV71-XULT: Add support for the NSH network monitor
2015-09-25 10:14:40 -06:00
Gregory Nutt
0ed7ddb8a4
Update submodules
2015-09-24 14:53:50 -06:00
Gregory Nutt
94a014085a
Update the simulator README.txt file
2015-09-24 14:53:30 -06:00
Alan Carvalho de Assis
9f465fc502
Rename battery.[ch] to battery_gauge.[ch]
2015-09-19 11:00:14 -06:00
pnb
508a55f6be
STM32F4Discovery: Should not include STM32 internal files when building for application
2015-09-19 07:56:50 -06:00
Gregory Nutt
71d5cff0dd
Update submodules
2015-09-18 12:48:05 -06:00
Gregory Nutt
4fd4a3b383
Minor style: # if pre-processor command should be in columnn 1
2015-09-18 12:47:32 -06:00
Stefan Kolb
983128e16a
sscanf: Formats a, A, e, E, g, and G should be treated the same as f and F
2015-09-17 07:41:33 -06:00
Gregory Nutt
08498b40de
Update README.txt
2015-09-16 16:23:25 -06:00
Alan Carvalho de Assis
c4cf5be231
Add support to Maxim MAX31855 Thermocouple-to-Digital
2015-09-13 15:56:48 -06:00
Alan Carvalho de Assis
9d490482d8
Configure stm32f4discovery board to support MAX31855 driver
2015-09-13 15:50:02 -06:00
Gregory Nutt
8a9fe183e3
Update README and comments
2015-09-13 15:46:31 -06:00
Gregory Nutt
24b0a56796
Refresh submodules
2015-09-11 14:56:18 -06:00
Gregory Nutt
80c113d0f5
SAMA5D2-XULT: Add Flexcom pin disambiguation
2015-09-11 14:55:52 -06:00
Gregory Nutt
3770ac7512
SAMA5D-XULT: A few more fixes for evolving SAMA5D2 port
2015-09-11 14:33:29 -06:00
Gregory Nutt
ce27334f23
Refresh sub-modules
2015-09-11 14:32:07 -06:00
Paul A. Patience
272ab8c090
Fix typo
2015-09-10 21:20:53 -04:00
Gregory Nutt
cce73fc1b0
SAMA5D2-XULT: Fix LED PIO definitions; Update README; Remove NSH startup script
2015-09-10 13:46:18 -06:00
Gregory Nutt
a9c6ec2b13
Merged in paulpatience/nuttx-boards (pull request #6 )
...
Nucleo F303RE: add more pins and update copyright notices
2015-09-10 13:22:52 -06:00
Gregory Nutt
264f3bea65
Update README file
2015-09-10 13:08:32 -06:00
Gregory Nutt
ed0d480d3e
Update submodules
2015-09-10 13:07:32 -06:00
Gregory Nutt
a1974edec5
SAMA5D2-XULT: Need to be more careful in board header file: It is included by assembly files
2015-09-10 13:06:31 -06:00
Paul A. Patience
10297a0b6a
Nucleo F303RE: add more pins and update copyright notices
2015-09-10 13:34:17 -04:00
Gregory Nutt
f0a79f0a74
LPC43 board.h files: Settings needed in lpc43_cpu.c
2015-09-10 08:15:50 -06:00
Gregory Nutt
c74b86c45e
Update SAMA5D2 README
2015-09-10 07:26:06 -06:00
Gregory Nutt
5c144f704f
Update README
2015-09-10 07:05:42 -06:00
Paul A. Patience
bf6163bec6
Add Nucleo F303RE board configuration
2015-09-10 05:26:38 -04:00
Gregory Nutt
5058ed3ef4
Only build shutdown if CONFIG_NET=y. The warning is pretty annoying
2015-09-09 12:14:04 -06:00
Gregory Nutt
4551d98a0b
SAMA5D2-XULT: Does not have USART0-4; Fix some compile issues
2015-09-09 12:13:22 -06:00
Gregory Nutt
c63e2f1e9e
sync submodules
2015-09-08 14:19:13 -06:00
Gregory Nutt
be1fc59cc5
Olimexino STM32: Fix some build issues
2015-09-08 13:57:55 -06:00
Gregory Nutt
89a23cbb86
Eliminate warning
2015-09-08 13:41:35 -06:00
Gregory Nutt
afdb3c751a
Fix typos from a previous commit
2015-09-08 12:45:30 -06:00
Gregory Nutt
ebf7fe9aae
Eliminate warnings
2015-09-08 12:41:52 -06:00
Gregory Nutt
c99a5d9001
Refresh configuration
2015-09-08 12:08:41 -06:00
Gregory Nutt
bc81762bef
Fix recently introduced typo
2015-09-08 11:37:05 -06:00
Gregory Nutt
366e3d3353
Eliminate warnings
2015-09-08 10:48:57 -06:00
Gregory Nutt
a782eb7e67
Eliminate warning
2015-09-08 10:41:59 -06:00
Gregory Nutt
bb595777fd
Eliminate warnings
2015-09-08 10:21:19 -06:00
Gregory Nutt
37111e6b2c
Eliminate warnings
2015-09-08 10:19:34 -06:00
Gregory Nutt
a7e43c7fdb
Eliminate some warnings
2015-09-08 09:20:18 -06:00
Gregory Nutt
7cf823fa97
Eliminate somw warnings
2015-09-08 09:19:40 -06:00
Gregory Nutt
9cd1e34792
Eliminate a warning
2015-09-08 08:08:46 -06:00
Gregory Nutt
6add91e42d
Spark: Eliminate some warnings
2015-09-08 07:41:37 -06:00
Gregory Nutt
bc46130c70
Rename libc/stdio/lib_avsprintf.c to lib_vasprintf.c
2015-09-07 13:28:00 -06:00
Sebastien Lorquet
f697cbfd0d
Change all references from avsprintf to vasprintf. From Sebastien Lorquet
2015-09-07 13:11:55 -06:00
Gregory Nutt
7d33e858dd
QSPI interface + ST25FL1 driver: Add methods to allocate properly aligned memory
2015-09-06 09:37:34 -06:00
Gregory Nutt
1cc7a5fc6f
SAMA5D2-XULT: Add support for the single on-board button
2015-09-05 12:42:57 -06:00
Gregory Nutt
cae703e868
Update README and ChangeLog
2015-09-05 12:17:05 -06:00
Gregory Nutt
49bbfbcb3d
Correct copyright data
2015-09-05 12:16:42 -06:00
Gregory Nutt
da484b1934
Add a very basic configuration to support the SAMA5D2 bring-up
2015-09-05 12:13:12 -06:00
Gregory Nutt
9c66bde5b0
Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1
2015-09-05 09:10:48 -06:00
Gregory Nutt
a3986e4aac
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:59 -06:00
Paul A. Patience
022ec31431
Update copyright notice
2015-09-04 19:46:43 -04:00
Gregory Nutt
b98109c419
Update ChangeLog, README file, and submodules
2015-09-04 16:49:06 -06:00
Gregory Nutt
871063d2b3
Forgot to add a file in the last commit
2015-09-04 16:46:59 -06:00
Paul A. Patience
55d8aee826
Simplify configs/ Makefiles by combining common longic into a new board.mk Makefile fragment. For Paul A. Patience"
2015-09-04 16:42:34 -06:00
Gregory Nutt
f44320d2a6
ST25FL1: SAMV71 QSPI always does transfers in multiples of 4 bytes
2015-09-02 10:19:47 -06:00
Paul A. Patience
81268bb75c
Add -Wundef warning flag
2015-09-01 13:19:57 -04:00
Gregory Nutt
2d84270552
ST25FL1: Correct some compile problems when file system debug is enabled
2015-08-31 09:25:14 -06:00
Gregory Nutt
34cb87bfd0
SAMV71-XULT: Add logic to initialize the ST24FL1 QuadSPI FLASH
2015-08-31 09:23:38 -06:00
SaeHie Park
a268e0aeb9
Fix a typo from an earlier commit
2015-08-26 18:12:58 -06:00
Gregory Nutt
00f8521e57
Refresh all nettest configuration
2015-08-26 14:36:17 -06:00
Juha Niskanen
70620d3dd6
rivers/rwbuffer: Fix some logic errors
2015-08-26 07:18:50 -06:00
Gregory Nutt
32de036490
Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up
2015-08-25 20:09:12 -06:00
Gregory Nutt
933d74e5c1
Networking: With these changes, I can ping the local loopback device from the simulator
2015-08-24 13:49:12 -06:00
Gregory Nutt
42771a792f
Refresh a configureatin
2015-08-24 13:47:13 -06:00
Gregory Nutt
47bab42498
Update submodules
2015-08-23 17:21:34 -06:00
Pavel Pisa
b67c0e8df6
boardctl: Last change uses DEBUGASSERT and, hence, requires inclusion of assert.h
2015-08-23 16:46:50 -06:00
Gregory Nutt
2e9b81ee83
Update submodule
2015-08-23 12:17:31 -06:00
Gregory Nutt
17b2f07cdb
boardctl: Update for movement of libc/symtab to apps/system
2015-08-23 12:17:10 -06:00
Gregory Nutt
f12692b78f
Extend canned symbol table logic to work in protected build mode
2015-08-23 10:44:04 -06:00
Gregory Nutt
c2d10cf875
boardctl(): Add support for the BOARDIOC_SYMTAB command
2015-08-23 10:25:25 -06:00
Gregory Nutt
16294a0963
Refresh some configurations
2015-08-23 09:21:29 -06:00
Gregory Nutt
64cff54894
Upate submodules
2015-08-22 10:16:51 -06:00
Gregory Nutt
f3f45a8fd8
Update README
2015-08-22 10:14:36 -06:00
Gregory Nutt
0b2fbd7a2c
Fix a DEBUGASSERTion
2015-08-21 12:33:14 -06:00
Gregory Nutt
435277ed3a
Update README
2015-08-21 12:32:34 -06:00
Gregory Nutt
2a81a76c33
Update ChangeLog
2015-08-20 07:56:20 -06:00
Pavel Pisa
c0881c36a3
Do not (re)define CONFIG_LPC17_SDRAM_32BIT to not conflict with config. If CONFIG_LPC17_SDRAM_16BIT it is defined anyway and with correct symbol redefinition suppression. From Pavel Pisa.
2015-08-20 07:55:02 -06:00
Gregory Nutt
470a95aa4f
Update submodule
2015-08-18 13:24:47 -06:00
Gregory Nutt
f4b35662ec
Trivial removal of trailing whitespace
2015-08-18 13:24:24 -06:00
Gregory Nutt
02306044b2
boardctl.h: Extended boardctl() commands with BOARDIOC_CAN_INITIALIZE
2015-08-18 13:23:34 -06:00
Gregory Nutt
88660657c2
Rename can_devinit() to board_can_initialize(). Hook in to boardctl() with BOARDIOC_CAN_INITIALIZE
2015-08-18 13:21:45 -06:00
Gregory Nutt
a987379e64
Add an error bit to the CAN message report
2015-08-18 07:27:00 -06:00
Gregory Nutt
bc9b901e13
Update README
2015-08-18 07:24:37 -06:00
Gregory Nutt
77f5c34af0
Fix some common typos
2015-08-16 11:00:30 -06:00
Gregory Nutt
4a0f89168a
SAMV71-XULT: Update README
2015-08-16 10:59:35 -06:00
Gregory Nutt
b2a2176123
Refresh submodules
2015-08-11 12:30:06 -06:00
Gregory Nutt
33664a3451
SAMV71-XULT: Add discussion of the SPI slave driver in the README file
2015-08-11 09:30:52 -06:00
Gregory Nutt
7791b2a62e
Refresh submodules + Update comments in SPI slave header file
2015-08-11 08:34:16 -06:00
Gregory Nutt
e3097a6028
Updte SAMV71-XULT README file
2015-08-11 07:52:20 -06:00
Gregory Nutt
7317f3bd88
Refresh modules; trival change to comments in header file
2015-08-09 09:49:49 -06:00
Gregory Nutt
b90f4a1299
Add stub SPI support for the SAMV71-XULT
2015-08-09 09:40:03 -06:00
Gregory Nutt
6f17af4b6f
Refresh all SAMV7 configurations
2015-08-09 09:20:29 -06:00
Gregory Nutt
0dd273935a
Standardize naming of all SLIP configuration options
2015-08-06 15:08:15 -06:00
Gregory Nutt
2e25cd0639
Standardize naming of all SLIP configuration options
2015-08-06 15:07:57 -06:00
Gregory Nutt
9a347f135a
Update submodules
2015-08-05 09:17:27 -06:00
Gregory Nutt
3cb9af4dd9
Update README
2015-08-05 09:16:56 -06:00
Gregory Nutt
a17d6e26a1
Update submodules
2015-08-05 08:22:26 -06:00
Gregory Nutt
b80d9daf36
Update a README file
2015-08-05 08:21:50 -06:00
Gregory Nutt
e3decca82c
Cosmetic update to some comments
2015-08-05 08:07:58 -06:00
Gregory Nutt
6f0cbfbd64
SAMV71-XULT: Add support for MCAN1 loopback test
2015-08-05 08:05:26 -06:00
Gregory Nutt
d0a852c979
Update submodules
2015-07-31 12:10:24 -06:00
Gregory Nutt
81dcadf70a
Add a fiew more SAMV7 clocking definitions
2015-07-31 11:17:26 -06:00
Gregory Nutt
f2555a986e
Update submodules
2015-07-31 08:40:58 -06:00
Gregory Nutt
650ba80ac0
All setenv.sh files updated to use the path to the ARM 4.0 2015q2 toolchain
2015-07-31 08:40:40 -06:00
Gregory Nutt
a4df1c4482
Update submodules
2015-07-31 07:18:33 -06:00
Gregory Nutt
3669292024
Cosmetic changes from review of pull request
2015-07-31 07:17:07 -06:00
Gregory Nutt
22fec589a2
Updates from review of pull request
2015-07-31 06:15:50 -06:00
Gregory Nutt
53005502f6
Merged in rnouse/nuttx-boards (pull request #2 )
...
Make FTMAC100 driver clear of board specific low-level functions
2015-07-31 06:12:37 -06:00
Anton D. Kachalov
5c413b3a66
Setup IRQ Level/Mode outside of FTMAC100 driver
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:09:07 +03:00
Anton D. Kachalov
66eacd32ce
Add flat tools
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:08:53 +03:00
Anton D. Kachalov
e1cb28f4ac
Enable TCP_BACKLOG, DRIVER_POLLING
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-31 14:06:04 +03:00
Gregory Nutt
3166af395d
Refresh submodules
2015-07-30 12:58:22 -06:00
Gregory Nutt
85b0c705e8
Add support for tab-completions in the sim/nsh configuration
2015-07-30 12:15:03 -06:00
Gregory Nutt
fb82061bf7
Two more places there THRE is used with inverted sense
2015-07-29 20:42:49 -06:00
Gregory Nutt
2dbb153559
Moxa: Needs to select some architecture. Is ARM7TDMI close?
2015-07-29 20:41:55 -06:00
Gregory Nutt
789f3d2768
Update submodules
2015-07-29 17:43:27 -06:00
Gregory Nutt
9cc0078640
Remove a .orig file that was accidentally committed
2015-07-29 16:57:14 -06:00
Gregory Nutt
6333da6678
Remove bogus README.txt file
2015-07-29 16:56:00 -06:00
Gregory Nutt
8935ff34d5
16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov
2015-07-29 16:31:21 -06:00
Gregory Nutt
ee84e74448
Moxa: Use prototype in include/nuttx/net/ftmac100.h; set a configuration option to indicate that the 16550 THRE LSR biut is inverted
2015-07-29 16:27:32 -06:00
Gregory Nutt
80d934406f
Update ChangeLog; refresh submodules
2015-07-29 14:13:31 -06:00
Gregory Nutt
504691ae6a
Updates from review of last pull request
2015-07-29 14:12:15 -06:00
Anton D. Kachalov
fbe5268d1a
[moxa/nsh/defconfig] Update default config
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
037332cafe
[moxa/src] Pass interface number to the ftmac100_initialize
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
2c12bc56ac
[moxart/nsh] Set RX/TX queues to 64/32 resp.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-07-29 19:11:56 +03:00
Anton D. Kachalov
764435cd34
Add support for MoxaRT
2015-07-29 19:11:56 +03:00
Gregory Nutt
7c32a1aa9b
Refresh submodule
2015-07-28 07:29:25 -06:00
Gregory Nutt
5c483d1f44
Refresh configuration
2015-07-28 07:28:54 -06:00
Gregory Nutt
5052e19563
Refresh submodule
2015-07-27 08:38:58 -06:00
Gregory Nutt
e8cff045f8
Correct name of sporadic scheduler hooks
2015-07-27 08:38:38 -06:00
Gregory Nutt
484f148001
Sporadic scheduler: Add instrumentation hooks to support GPIO outputs
2015-07-27 08:37:25 -06:00
Gregory Nutt
0240bd35fb
STM32F7: Add hooks to monitor/test the sporadic scheduler
2015-07-27 08:20:42 -06:00
Gregory Nutt
ab37a759d8
Eliminate a warning detected by nuttx/tools/testbuild.sh
2015-07-22 14:11:25 -06:00
Gregory Nutt
8c6c00898d
Eliminate a warning detected by nuttx/tools/testbuild.sh
2015-07-22 14:09:56 -06:00
David Sidrane
e5a9919c8d
Make some STM32F7 pin naming more consistent
2015-07-21 15:33:56 -06:00
Gregory Nutt
8451cbc3cd
Update README
2015-07-21 15:32:57 -06:00
Gregory Nutt
2a7416238a
Syscall fixes: Add support for Cortex-M7; mount syscall has to be suppressed if there are no mountable file systems
2015-07-21 11:20:46 -06:00
Gregory Nutt
796cb1e13c
STM32F746G-Disco: Add support for a protected build. C++ initialization logic moved to apps/platform where it belongs
2015-07-21 11:16:44 -06:00
Gregory Nutt
dd3e1e7d21
STM32 F7: Port some F4 protected mode files to the F7
2015-07-21 07:59:20 -06:00
Gregory Nutt
03ab4e8c75
Update README.txt file
2015-07-21 07:58:02 -06:00
Gregory Nutt
37b956f83d
STM32 F7 Ethernet: With these last changes, the STM32 F7 Ethernet driver is functional
2015-07-20 10:57:06 -06:00
Gregory Nutt
2e09cf3112
STM32F746-DISCO: Enable the NSH telnet sessions
2015-07-20 10:54:47 -06:00
Gregory Nutt
9276e4d23a
Refresh submodules; upated STM22F3 Ethernet debug output
2015-07-20 09:31:49 -06:00
Gregory Nutt
784a3eb4d0
STM32F746G-DISCO: Fixe some problems in Ethernet configuration
2015-07-20 09:29:45 -06:00
Gregory Nutt
32aa2e937e
Update ChangeLog
2015-07-20 07:25:13 -06:00
Alan Carvalho de Assis
04b777cb9a
configs/stm32f4discovery/: Add support to BMP180 driver on STM32F4Discovery. From Alan Carvalho de Assis.
2015-07-20 07:22:01 -06:00
Gregory Nutt
e2a62ac814
STM32 F7 Ethernet: RX/TX descriptors should be flushed to memory when they are first initialized
2015-07-20 07:05:35 -06:00
Gregory Nutt
08b491d18c
STM32F746G-DISCO: In netnsh configuration, software needs to assign a MAC address
2015-07-19 17:11:27 -06:00
Gregory Nutt
05a2c82409
Update submodules
2015-07-19 14:14:06 -06:00
Gregory Nutt
ba105349a4
STM32F746G-DISCO: Add a network-enabled NSH configuratino for network testing
2015-07-19 14:13:26 -06:00
Gregory Nutt
4b9b7589b9
STM32 F7: Add logic to enable I-/D-Cache, ITCM and DTCM
2015-07-19 10:43:26 -06:00
Gregory Nutt
4cb2464e77
STM32 F7 disco: Enabled I-/D-Cache, DTCM, recallibrate delay loop. Update README.txt
2015-07-19 10:40:32 -06:00
Gregory Nutt
ac7bbbc601
STM32 F7 Disco: Calibrate delay loop
2015-07-19 09:59:09 -06:00
Gregory Nutt
0b581944b9
STM32 F7: Port the STM32 F3 serial driver to the STM32 F7
2015-07-19 09:25:27 -06:00
Gregory Nutt
98f62d23d5
STM32 F7: Refresh configuration
2015-07-19 09:24:52 -06:00
Gregory Nutt
5c76329d2e
STM32 F7: Add PWR register definitions
2015-07-18 11:55:35 -06:00
Gregory Nutt
9a1df49096
STM32F746G-DISCO: Add FLASH wait states and USART6 pin mapping to board.h
2015-07-18 11:54:44 -06:00
Gregory Nutt
07d5b6d5bc
STM32 F7: Fix input clock source to SysTick
2015-07-17 16:38:47 -06:00
Gregory Nutt
2434baea9d
STM32F746G-DISCO: linker script needs EXTERN(_vectors) if linking with CONFIG_ARMv7M_CMNVECTOR=y
2015-07-17 16:37:52 -06:00
Gregory Nutt
7af567b9e2
STM32F7: Add GPIO header files
2015-07-17 15:43:51 -06:00
Gregory Nutt
d69cc38fe1
STM32F746G-DISCO: Fix a couple of compilation problems
2015-07-17 15:42:40 -06:00
Gregory Nutt
1a85720d42
STM32F745G-DISCO: Update PLL configuration to get 216MHz
2015-07-17 15:17:56 -06:00
Gregory Nutt
dac4a67c7b
STM32 F7: Add RCC header files
2015-07-17 13:52:10 -06:00
Gregory Nutt
8b294b5a8b
STM32 F7: Temporary build workarounds for missing header files
2015-07-17 13:51:11 -06:00
Gregory Nutt
a314561474
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:47:16 -06:00
Gregory Nutt
869daffefa
STM32F746G-DISCO: Getting closer to a build
2015-07-17 11:46:15 -06:00
Gregory Nutt
50897b7a64
STM32 F7: Misc naming fixes
2015-07-16 19:49:20 -06:00
Gregory Nutt
1b341a30d8
STM32 F7: Update configuration variable naming
2015-07-16 19:48:39 -06:00
Gregory Nutt
55cbf843b8
STM32 F7: Add more configuration selections
2015-07-16 18:30:40 -06:00
Gregory Nutt
04ed5d2b76
Update STM32 F7 defconfig
2015-07-16 18:29:40 -06:00
Gregory Nutt
27f6509022
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:43:25 -06:00
Gregory Nutt
0850780a03
Add initial support for the STM32 F7 Discovery board
2015-07-16 11:41:40 -06:00
Gregory Nutt
4bcd13eabd
Add RGB blending logic needed to support anti-aliasing
2015-07-14 07:57:54 -06:00
Gregory Nutt
bcee1434b6
Refresh configuration
2015-07-14 07:56:07 -06:00
Gregory Nutt
d8da7009c6
Refresh submodules
2015-07-12 14:13:38 -06:00
Gregory Nutt
75595ddfef
Remove refereneces to DNSCLIENT IPv4/IPv6
2015-07-12 14:13:18 -06:00
Gregory Nutt
14dedf3dea
Refresh submodules
2015-07-11 08:16:26 -06:00
Gregory Nutt
58f21e7621
Fix a typo in a README file
2015-07-11 08:16:07 -06:00
Gregory Nutt
e69d14d89b
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:41:26 -06:00
Gregory Nutt
2fb2bd0f99
Fix some warnings/errors detected by nuttx/tools/testbuilds.sh
2015-07-10 18:40:49 -06:00
Gregory Nutt
7df472031d
Refresh configurations
2015-07-10 18:39:59 -06:00
Gregory Nutt
1dfb94bc8f
Update submodules
2015-07-10 13:31:02 -06:00
Gregory Nutt
6b506fd5f4
Refresh a configuration
2015-07-10 13:30:24 -06:00
Gregory Nutt
4102470bdd
Move the DNS server from apps/netutils/dnsclient to nuttx/libc/netdb. Move netdb functions from libc/net to libc/netdb. Fix up naming to reflect the repartitioning
2015-07-10 12:11:40 -06:00
Gregory Nutt
42f69ba42f
Rename CONFIG_NETUTILS_DNS* to CONFIG_NETDB_DNS* to reflect the movement of the DNS server from apps/netutils to nuttx/libc/netdb
2015-07-10 12:09:58 -06:00
Gregory Nutt
59cc4a7a7b
Protected mode: Redesign how the user space heap is accessed from the kernel code. It used to call memory management functions in user space via function pointers in the userspace interface. That is inefficient because the first thing that those memory management functions do is to trap back into the kernel to get the current PID. Worse, that operation can be fatal is certain fragile situations such as when a task is exitting.
...
The solution is to remove all of the memory management function calls from the interface. Instead, the interface exports the userspace heap structure and then kernel size implementations of those memory management functions will operate on the userspace heap structure. This avoids the unnecessary system calls and, more importantly, failures do to freeing memory when a test exits.
2015-07-10 08:37:02 -06:00
Gregory Nutt
dcb2b2077f
Update protected build logic for all platforms that supported the protected build. This is necessary due to changes in the definition of the userspace interface
2015-07-10 08:35:36 -06:00
Gregory Nutt
47148fb4c8
Refresh configuration
2015-07-10 08:34:35 -06:00
Gregory Nutt
f94fe747ae
Undo part of a previous change. Move get/sethostname back from net/netdb to libc/unistd
2015-07-08 11:11:52 -06:00
Gregory Nutt
babbd4438c
SAMD21-Xplained: Refresh configuration and update status in README
2015-07-06 11:08:07 -06:00
Gregory Nutt
5f2a181599
Add conditional definition for MIN macro needed in last commit
2015-07-05 09:08:45 -06:00
Gregory Nutt
a5e185569d
Refresh configuration
2015-07-05 09:06:57 -06:00
Gregory Nutt
6576672e09
uname: version string must hold 40 character value; strings returned by uname must always be NUL terminated
2015-07-05 06:46:00 -06:00
Gregory Nutt
04b73b58a8
Add a name string for custom boards. Used onlyby uname()
2015-07-05 06:44:06 -06:00
Gregory Nutt
ffd0d12b04
Refresh submodules
2015-07-04 15:21:48 -06:00
Gregory Nutt
f7ba1b1eeb
Remove all references to the dedunct CONFIG_SYSTEM_SYSINFO configuration from all defconfig files
2015-07-04 15:19:11 -06:00
Gregory Nutt
772bcb845e
Refresh submodules
2015-07-04 12:47:07 -06:00
Gregory Nutt
f652c770cd
Refresh configuration
2015-07-04 12:46:50 -06:00
Gregory Nutt
049224f544
Add support for a BOARDIOC_RESET boardctl() command. Enable configuration options to support BOARDIOC_RESET for ARMv6-M and ARMv7-M
2015-07-04 10:39:24 -06:00
Gregory Nutt
70b6085927
Add support for a BOARDIOC_RESET boardctl() command
2015-07-04 10:36:47 -06:00
Gregory Nutt
48dee66356
Remove obsoleted CONFIG_SYSTEM_POWEROFF from configurations. The NSH shutdown command should be available instead
2015-07-04 09:05:59 -06:00
Gregory Nutt
b1e9b0026d
Refresh submodules
2015-07-04 08:18:30 -06:00
Gregory Nutt
2760ca1cda
Enable CONFIG_BOARD_POWEROFF=y. Now you can use the NSH shutdown command to terminate the NSH session
2015-07-04 08:17:40 -06:00
Gregory Nutt
8be9b1071c
Update submodules
2015-07-04 07:25:12 -06:00
Gregory Nutt
149fc3f79e
Update README
2015-07-04 07:24:35 -06:00
Gregory Nutt
ee21a3ad77
Update submodule configs
2015-07-03 15:45:26 -06:00
Gregory Nutt
c862f1fe59
Refresh SAMD21-Xplained Configuration
2015-07-03 15:45:04 -06:00
Gregory Nutt
be09a87c0e
SST25: Eliminate some warnings
2015-07-03 14:38:33 -06:00
Gregory Nutt
f6e749452e
Refresh/fix broken configurations
2015-07-03 14:35:10 -06:00
Gregory Nutt
a0fba3a5f6
Refresh/fix broken configurations
2015-07-03 12:36:52 -06:00
Gregory Nutt
3e04194edd
SAM4L: GPIO interrupts are not yet supported; can't compile sam_gpioirq.c yet
2015-07-03 09:33:52 -06:00
Gregory Nutt
6a9e986be9
Refresh/fix more broken configurations
2015-07-03 09:33:02 -06:00
Stavros Polymenis
701509f9bd
Add implementations of uname() and gethost(). From Stavros Polymenis.
2015-07-03 07:50:27 -06:00
Gregory Nutt
2b6c679d6b
Refresh configuration
2015-07-03 07:49:53 -06:00
Gregory Nutt
d6eacb3ab5
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:51 -06:00
Gregory Nutt
ec193059c1
Power off support now depends on CONFIG_ARCH_HAVE_POWEROFF
2015-07-03 06:53:32 -06:00
Gregory Nutt
c0946bfd7d
Correct some issues introduced in the last commit
2015-07-02 17:54:05 -06:00
Gregory Nutt
21fd1e50f4
Fix some issues introduced in last commit; refresh/fix more broken configurations
2015-07-02 17:53:32 -06:00
Gregory Nutt
27ea02a85f
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:54 -06:00
Gregory Nutt
b3731ca5ca
Modify board_power_off() so that is is called only via boardctl()
2015-07-02 17:09:16 -06:00
Gregory Nutt
064b4923c6
Move prototype of board_power_off() to include/nuttx/board.h where it belongs
2015-07-02 16:25:31 -06:00
Gregory Nutt
56e8457d4d
Refresh/fix more broken board configurations
2015-07-02 16:24:32 -06:00
Gregory Nutt
9db4d7da94
STM32 RTCC: Eliminate a warning when ALARM support is enabled
2015-07-02 15:02:59 -06:00
Gregory Nutt
fe8e4ac747
Refresh/Fix more broken configurations
2015-07-02 15:02:14 -06:00
Gregory Nutt
bcb4b6503f
Update configs
2015-07-02 12:20:01 -06:00
Gregory Nutt
0d11695e3f
Refresh/fix more broken configurations
2015-07-02 12:19:16 -06:00
Gregory Nutt
0f0800de25
Add a dummy arch_invalidate_icache because for symmetry in the naming of cache operations
2015-07-02 11:13:23 -06:00
Gregory Nutt
0eb2d9e937
Refresh/fix more broken configurations
2015-07-02 11:11:51 -06:00
Gregory Nutt
7ba6beb38d
Update sub-module configuration
2015-07-01 19:31:08 -06:00
Gregory Nutt
9774ebc568
Fix/update some STR7 configurations
2015-07-01 19:18:51 -06:00
Gregory Nutt
d96365b048
Merge branch 'master' of https://bitbucket.org/nuttx/boards
2015-07-01 18:34:33 -06:00
Gregory Nutt
766269e67d
Use of GPIO is conditioned on CONFIG_ENC238J60
2015-07-01 18:34:23 -06:00
Gregory Nutt
8fa6ecc1b9
Remove a warning
2015-07-01 18:25:13 -06:00
Gregory Nutt
97245f2374
Fix compile error in Olimex STR7 configuration and LPC17xx warning
2015-07-01 18:24:44 -06:00
Gregory Nutt
e909b59fd5
Refresh several configurations. Fix errors and warnings detected by tools/testbuild.sh
2015-07-01 14:34:33 -06:00
Gregory Nutt
c6f56ccf8c
Fix some typos in header files
2015-07-01 11:45:08 -06:00
Gregory Nutt
4b97a5314c
Refresh/fix some more LPC17xx configurations
2015-07-01 11:43:06 -06:00
Gregory Nutt
799205d59b
Refresh configurations; fix some minor build issues
2015-07-01 10:25:46 -06:00
Gregory Nutt
ff389b15ab
LPC17xx: Fix a warning about an unused local variable
2015-07-01 09:36:39 -06:00
Gregory Nutt
89f381723e
Refresh some LPC17xx configurations; fix a few LPC17xx configuration build problems
2015-07-01 09:35:21 -06:00
Gregory Nutt
32e41423e4
Fix a Cortex-A compilation error in the vfork() logic when system calls are enabled in modes other than CONFIG_BUILD_KERNEL.
2015-07-01 08:34:51 -06:00
Gregory Nutt
f5c2d7fbc2
Refresh a configuration
2015-07-01 08:32:45 -06:00
Gregory Nutt
15ca232f9b
Refresh configuration; fix compilation errors if LED support enabled
2015-07-01 08:02:54 -06:00
Gregory Nutt
05575c8e2b
DM320: GIO header uses get/putreg functions and so should include up_arch.h
2015-07-01 08:01:49 -06:00
Gregory Nutt
7632e8b209
Update top-level .gitignore
2015-07-01 07:38:11 -06:00
Gregory Nutt
3f1a9e070d
NTOSD: Update and fix a configuration. The way it was trying to disable the console and file system caused build problems
2015-07-01 07:35:52 -06:00
Gregory Nutt
567b4ff6a4
Update README
2015-06-30 08:11:49 -06:00
Gregory Nutt
3cee0bd5c6
Fix a ultra-trivial typo
2015-06-29 13:22:08 -06:00
Gregory Nutt
2113f4af7b
The configs/ directory is now submodule provided by the boards repository
2015-06-29 13:18:05 -06:00
Gregory Nutt
d1ab9c2e0a
Remove the configs/ directory
2015-06-29 13:12:29 -06:00
Gregory Nutt
205c0978e7
Update ChangeLog
2015-06-29 13:08:42 -06:00
Gregory Nutt
ba2e6ac0b9
Update some URLs due to movement of the Documentation repository
2015-06-29 11:25:03 -06:00
Gregory Nutt
d861375607
Update some URLs due to movement of the Documentation repository
2015-06-29 11:25:03 -06:00
Gregory Nutt
9e99cfa4e0
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
2f9bf6b792
Correct many bitbucket.org URLs
2015-06-28 09:14:52 -06:00
Gregory Nutt
7214e52fb2
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
342f5fe33d
Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation
2015-06-28 08:08:57 -06:00
Gregory Nutt
46bd0bc307
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
63eaa31da2
This cleans up most of the remaining SourceForge references
2015-06-26 18:13:20 -06:00
Gregory Nutt
5305100bdc
Change some Sourceforge URLs to bitbucket URLs
2015-06-26 17:29:32 -06:00
Gregory Nutt
d66532971f
Change some Sourceforge URLs to bitbucket URLs
2015-06-26 17:29:32 -06:00
Gregory Nutt
71e8137da1
Fix a typo in configuration variable name: SAMD21 should be SAML21
2015-06-26 13:33:35 -06:00
Gregory Nutt
12f6eb41b2
Fix a typo in configuration variable name: SAMD21 should be SAML21
2015-06-26 13:33:35 -06:00
Gregory Nutt
38ac5e2be3
Fix a typo in configuration variable name: SAM21 should be SAMD21
2015-06-26 13:24:33 -06:00
Gregory Nutt
7613e53b65
Fix a typo in configuration variable name: SAM21 should be SAMD21
2015-06-26 13:24:33 -06:00
Efim Monjak
e187d6eb8b
In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak.
2015-06-26 06:52:37 -06:00
Efim Monjak
5a4bb1714d
In ARMV71-Xplained clock configuration, divider was set to 25 to get 25*12MHz=300MHz CPU clock. The correct multiplier is 24 becaue the calculatin if (24+1)*12MHz. So the board was running at 312MHz. From Efim Monjak.
2015-06-26 06:52:37 -06:00
Gregory Nutt
c1990bb2ea
Update README and TODO list
2015-06-25 13:39:57 -06:00
Gregory Nutt
ce7955bae8
Update README and TODO list
2015-06-25 13:39:57 -06:00
Gregory Nutt
ae729d7a27
Set date to 2015 in all new SAMD21 Xplained files
2015-06-21 12:42:35 -06:00
Gregory Nutt
e615c848fe
Set date to 2015 in all new SAMD21 Xplained files
2015-06-21 12:42:35 -06:00
Gregory Nutt
1afba254b6
Extend apps/examples/unionfs so it is includes a root offset on one of the unified file sysems
2015-06-21 12:21:54 -06:00
Gregory Nutt
8d5cfcfb20
Extend apps/examples/unionfs so it is includes a root offset on one of the unified file sysems
2015-06-21 12:21:54 -06:00
Gregory Nutt
0e98c595c2
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
0546eb7d04
SAMD21: Update fuse definitions for the SAMD21
2015-06-21 10:20:23 -06:00
Gregory Nutt
476d362986
Updates to SAMD21 Xplained NSH configuration
2015-06-21 07:56:15 -06:00
Gregory Nutt
ad454683bb
Updates to SAMD21 Xplained NSH configuration
2015-06-21 07:56:15 -06:00
Gregory Nutt
fe5f060486
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
c8e6720c62
Add board configuration for the SAMD21 Xplained board
2015-06-21 07:48:46 -06:00
Gregory Nutt
3a4ab48049
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
8750bf0d9a
SAMD2x: Eliminate a warning
2015-06-20 16:06:01 -06:00
Gregory Nutt
e7bf809c47
configs/sim/nsh: Need larger stack when posix_spawn
2015-06-18 10:59:29 -06:00
Gregory Nutt
d8da1d61ec
configs/sim/nsh: Need larger stack when posix_spawn
2015-06-18 10:59:29 -06:00
Gregory Nutt
612bc18e90
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
deb46613d7
Refresh SAMV71-Xult configurations
2015-06-17 12:01:33 -06:00
Gregory Nutt
317a9c029d
Update README
2015-06-15 11:37:16 -06:00
Gregory Nutt
2782d6be80
Update README
2015-06-15 11:37:16 -06:00
Gregory Nutt
93ac49b403
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
1933260618
SAML21 minor stuff
2015-06-14 14:27:58 -06:00
Gregory Nutt
013e409293
Add start/end LPRAM symbols. We might need to use the _elpram symbol if we want to add some LPRAM to heap
2015-06-14 08:57:47 -06:00
Gregory Nutt
4d4d96cb2f
Add start/end LPRAM symbols. We might need to use the _elpram symbol if we want to add some LPRAM to heap
2015-06-14 08:57:47 -06:00
Gregory Nutt
b1154a4a42
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
6b8ae61dad
SAML21: Add DMA descriptor management logic
2015-06-14 08:48:25 -06:00
Gregory Nutt
19bbebd10e
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
ff966232a5
SAMD21: Add build framework for DMA support. Nothing there yet except for skeletal logic taken from SAM3/4.
2015-06-13 15:06:37 -06:00
Gregory Nutt
913a5251e5
Refresh configurations
2015-06-12 09:56:14 -06:00
Gregory Nutt
2085d6a7fa
Refresh configurations
2015-06-12 09:56:14 -06:00
Gregory Nutt
82e1473614
Teensy-3.1: Calibrate delay loop
2015-06-12 07:44:44 -06:00
Gregory Nutt
86dfb3dd94
Teensy-3.1: Calibrate delay loop
2015-06-12 07:44:44 -06:00
Gregory Nutt
d34477de7b
Teensy-3.1: Fix board LED
2015-06-12 07:37:06 -06:00
Gregory Nutt
12753c632a
Teensy-3.1: Fix board LED
2015-06-12 07:37:06 -06:00
Gregory Nutt
bbdb796350
Fix some garbage left in a README file in a previous commit
2015-06-11 14:44:42 -06:00
Gregory Nutt
ca9f891194
Fix some garbage left in a README file in a previous commit
2015-06-11 14:44:42 -06:00
Gregory Nutt
4f045430ac
Teensy-3.0: Rename Teensy-3.1 linker script; add a new linker script for Teensy-3.0
2015-06-11 12:56:58 -06:00
Gregory Nutt
d08c4948f2
Teensy-3.0: Rename Teensy-3.1 linker script; add a new linker script for Teensy-3.0
2015-06-11 12:56:58 -06:00
Gregory Nutt
9c7ba5122b
With these tweaks to the clocking, the Teensy-3.1 NSH configuration is fully functional
2015-06-11 09:07:35 -06:00
Gregory Nutt
f4e8a5fb1d
With these tweaks to the clocking, the Teensy-3.1 NSH configuration is fully functional
2015-06-11 09:07:35 -06:00
Gregory Nutt
c2e39c107b
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
73f43354a5
Kinetis: Add logic to set CFM protect area to all 0xff in all configurations
2015-06-11 08:39:40 -06:00
Gregory Nutt
26a8fc9233
Fix some typos in last commit
2015-06-10 17:22:51 -06:00
Gregory Nutt
af0862e3e7
Fix some typos in last commit
2015-06-10 17:22:51 -06:00
Gregory Nutt
45426598d6
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
de254f6ac3
Teensy-3.1: Add user LED support
2015-06-10 17:19:26 -06:00
Gregory Nutt
eae8126cb8
Update README
2015-06-10 15:19:29 -06:00
Gregory Nutt
63226728b6
Update README
2015-06-10 15:19:29 -06:00
Gregory Nutt
5891bd27ad
Typo fix
2015-06-10 12:31:42 -06:00
Gregory Nutt
d519436eac
Typo fix
2015-06-10 12:31:42 -06:00
Gregory Nutt
2f90912f12
Add support for teensy-3.0
2015-06-10 11:45:53 -06:00
Gregory Nutt
93e0980623
Add support for teensy-3.0
2015-06-10 11:45:53 -06:00
Gregory Nutt
2fb9cc8235
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
bb73c45a61
SAML21: Since SERCOM5 usese a different output channel, it will also need a different GCLK generator
2015-06-10 08:38:35 -06:00
Gregory Nutt
2b97ae04b9
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
85e0da0588
SAML21: A different SLOW clock must be used with SERCOM5
2015-06-10 08:18:05 -06:00
Gregory Nutt
9ec96e4382
Updated LPC1115 README from Alan Carvalho de Assis
2015-06-10 06:48:25 -06:00
Gregory Nutt
cc714678d4
Updated LPC1115 README from Alan Carvalho de Assis
2015-06-10 06:48:25 -06:00
Gregory Nutt
bba54ed30a
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
ebad33936f
Add support for other members of the Kinetis MK20DX---VLH7 family; undate a README
2015-06-09 18:01:32 -06:00
Gregory Nutt
9ffc4c4feb
Oops... console disabled in the Teensy 3.1 configuration
2015-06-09 17:17:56 -06:00
Gregory Nutt
900ceee2b9
Oops... console disabled in the Teensy 3.1 configuration
2015-06-09 17:17:56 -06:00
Gregory Nutt
79248eabf5
Add board support for the Teensy-3.1 board
2015-06-09 17:03:52 -06:00
Gregory Nutt
9036b23392
Add board support for the Teensy-3.1 board
2015-06-09 17:03:52 -06:00
Gregory Nutt
8644eb7868
Rename teensy-3.1 directory to teensy-3.x. Add board.h header file
2015-06-09 15:54:04 -06:00
Gregory Nutt
1acfa1771b
Rename teensy-3.1 directory to teensy-3.x. Add board.h header file
2015-06-09 15:54:04 -06:00
Gregory Nutt
f27161c2b5
Refresh some configurations
2015-06-09 15:19:37 -06:00
Gregory Nutt
27211418ff
Refresh some configurations
2015-06-09 15:19:37 -06:00
Gregory Nutt
0e668f1711
Prep for the NuttX-7.10 Release
2015-06-09 11:33:50 -06:00
Gregory Nutt
8be0822b98
Prep for the NuttX-7.10 Release
2015-06-09 11:33:50 -06:00
Gregory Nutt
10664271eb
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
8967e9715f
Update/add README.txt files
2015-06-09 07:03:25 -06:00
Gregory Nutt
c09cc0dd07
Update some README files
2015-06-07 10:25:03 -06:00
Gregory Nutt
2225b1642c
Update some README files
2015-06-07 10:25:03 -06:00
Gregory Nutt
207140adb7
Update documentation and README file
2015-06-06 19:16:17 -06:00
Gregory Nutt
219bf39ace
Update documentation and README file
2015-06-06 19:16:17 -06:00
Gregory Nutt
c9a0749142
Lincoln60: Add a thttpd-binfs configuration. That configuration still does not work on initial commit
2015-06-06 19:16:16 -06:00
Gregory Nutt
d908a74089
Lincoln60: Add a thttpd-binfs configuration. That configuration still does not work on initial commit
2015-06-06 19:16:16 -06:00
Gregory Nutt
44a23bd26b
apps/examples/thttpd now uses the Union File System if BINFS is selected for CGI binaris
2015-06-06 19:16:14 -06:00
Gregory Nutt
0c03d04082
apps/examples/thttpd now uses the Union File System if BINFS is selected for CGI binaris
2015-06-06 19:16:14 -06:00
Gregory Nutt
f6a1963219
Add simulator configuration for testing the Union Fs. Fix a few bugs. Almost works but still too flaky
2015-06-05 15:02:24 -06:00
Gregory Nutt
a78224d114
Add simulator configuration for testing the Union Fs. Fix a few bugs. Almost works but still too flaky
2015-06-05 15:02:24 -06:00
Gregory Nutt
086127b24f
Add support for a union file system that can be used to overlay and merge the content of two mounted file systems.
2015-06-05 13:18:06 -06:00
Gregory Nutt
1d370178fb
Add support for a union file system that can be used to overlay and merge the content of two mounted file systems.
2015-06-05 13:18:06 -06:00
Gregory Nutt
97921ca474
Lincoln60: Add GPIO definitions for the microSD slot
2015-06-04 16:58:59 -06:00
Gregory Nutt
1c6c76033a
Lincoln60: Add GPIO definitions for the microSD slot
2015-06-04 16:58:59 -06:00
Gregory Nutt
b62497a416
Lincoln60: Correct size of SRAM in configurations
2015-06-04 07:54:56 -06:00
Gregory Nutt
2db059145c
Lincoln60: Correct size of SRAM in configurations
2015-06-04 07:54:56 -06:00
Gregory Nutt
f970157466
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
2015-06-03 19:47:10 -06:00
Gregory Nutt
54bbdca913
LC17 Ethernet: Ignore 4-bit versin number when checking for PHY ID match
2015-06-03 19:47:10 -06:00
Gregory Nutt
1f1710af99
Lincoln60: Update board.h to get clean compile of the netnsh configuration. Update README.txt
2015-06-03 19:08:48 -06:00
Gregory Nutt
e96ec630c1
Lincoln60: Update board.h to get clean compile of the netnsh configuration. Update README.txt
2015-06-03 19:08:48 -06:00
Gregory Nutt
4ef6a88b30
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
2015-06-03 18:48:08 -06:00
Gregory Nutt
bf4db207ad
Lincoln60: Add a network enabled NXH configuration (still does not yet build)
2015-06-03 18:48:08 -06:00
Gregory Nutt
5456069d37
Update README.txt
2015-06-03 16:36:13 -06:00
Gregory Nutt
201a024ef9
Update README.txt
2015-06-03 16:36:13 -06:00
Gregory Nutt
e15119ddd8
Refresh Lincoln60 configuration
2015-06-03 15:52:49 -06:00
Gregory Nutt
5df7ae9b64
Refresh Lincoln60 configuration
2015-06-03 15:52:49 -06:00
Gregory Nutt
7d971aa4a2
SAMV71-XULT: Fix a warning with button support is disabled
2015-06-03 08:36:19 -06:00
Gregory Nutt
3ee2902c3e
SAMV71-XULT: Fix a warning with button support is disabled
2015-06-03 08:36:19 -06:00
Gregory Nutt
6030cf5817
Refresh and maybe break some configurations
2015-06-02 19:01:05 -06:00
Gregory Nutt
f0da343f24
Refresh and maybe break some configurations
2015-06-02 19:01:05 -06:00
Gregory Nutt
8523755105
Fix a default value in the THTTPD Kconfig; updated a README file
2015-06-02 14:59:13 -06:00
Gregory Nutt
6d1ea9bb65
Fix a default value in the THTTPD Kconfig; updated a README file
2015-06-02 14:59:13 -06:00
Gregory Nutt
82ff8a3be4
Extend apps/examples/thttpd so that it provides a index.cgi file the binfs file system is selected.
2015-06-02 14:26:08 -06:00
Gregory Nutt
3e836a3156
Extend apps/examples/thttpd so that it provides a index.cgi file the binfs file system is selected.
2015-06-02 14:26:08 -06:00
Gregory Nutt
3f887a79ad
Damn. THTTPD will not yet run with binfs because it wants an index.html file. THTTPD does support indexing directories if CONFIG_THTTPD_GENERATE_INDICES=y, but there are some compilation issues that need to be fixed when that option is selected.
2015-06-02 12:13:18 -06:00
Gregory Nutt
0de965100c
Damn. THTTPD will not yet run with binfs because it wants an index.html file. THTTPD does support indexing directories if CONFIG_THTTPD_GENERATE_INDICES=y, but there are some compilation issues that need to be fixed when that option is selected.
2015-06-02 12:13:18 -06:00
Gregory Nutt
4c56ff036a
Olimex LPC1766STK. Add an example configuration showing how to build apps/netutils/thttpd using binfs
2015-06-02 11:00:18 -06:00
Gregory Nutt
d538025dca
Olimex LPC1766STK. Add an example configuration showing how to build apps/netutils/thttpd using binfs
2015-06-02 11:00:18 -06:00
Gregory Nutt
314e78158a
Fix some memory sizing errors in refreshed defconfig files
2015-06-02 08:44:57 -06:00
Gregory Nutt
54d16d0933
Fix some memory sizing errors in refreshed defconfig files
2015-06-02 08:44:57 -06:00
Gregory Nutt
de88e41b7b
Refresh some Olimex LPC1766STK networking configurations
2015-06-02 08:12:44 -06:00
Gregory Nutt
1b3d003d9e
Refresh some Olimex LPC1766STK networking configurations
2015-06-02 08:12:44 -06:00
Gregory Nutt
e9d3b3d038
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
2015-06-01 14:16:18 -06:00
Gregory Nutt
6068820bf3
Add support uClibc++ excpetions. This involves additional handling for relative relation types, additional support for unwinding, as well as additional changes. The culmination of a big effort fromo Leo Aloe3132
2015-06-01 14:16:18 -06:00
Gregory Nutt
3962c4e975
LPC17xx: All configurations that had the LPC17xx ethernet driver enabled have CONFIG_NET_NOTINTS=y enabled and also the HP worked which is now needed in those configurations
2015-06-01 08:56:42 -06:00
Gregory Nutt
482d82c20e
LPC17xx: All configurations that had the LPC17xx ethernet driver enabled have CONFIG_NET_NOTINTS=y enabled and also the HP worked which is now needed in those configurations
2015-06-01 08:56:42 -06:00
Gregory Nutt
add36cc3de
Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis
2015-05-30 10:00:54 -06:00
Gregory Nutt
fce87336a4
Add an option to disable support for long long formats in lib_vsprintf. From Alan Carvalho de Assis
2015-05-30 10:00:54 -06:00
Gregory Nutt
784f037690
STM32 F4 Discovery: Move up_cxxinitialize from nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery where it belongs.
2015-05-29 12:08:15 -06:00
Gregory Nutt
80470773ca
STM32 F4 Discovery: Move up_cxxinitialize from nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery where it belongs.
2015-05-29 12:08:15 -06:00
Gregory Nutt
1787506332
Stm32 F4 Discovery; Refrsh ELF configuration; update README.txt
2015-05-29 11:42:40 -06:00
Gregory Nutt
578cd494fe
Stm32 F4 Discovery; Refrsh ELF configuration; update README.txt
2015-05-29 11:42:40 -06:00
Gregory Nutt
4c8983bd88
Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in
2015-05-27 11:39:44 -06:00
Gregory Nutt
b94321cfb4
Extend device specific callbacks to ICMPv6 and ARP. Fix some IPv6 compilation errors that have crept in
2015-05-27 11:39:44 -06:00
Gregory Nutt
5515d5dd42
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
2015-05-26 13:25:39 -06:00
Gregory Nutt
fabd892d3a
SAM4L: Fix some issues from loast commit. Now running off DFLL with source clock = XOSCK32K
2015-05-26 13:25:39 -06:00
Gregory Nutt
6ec71f792f
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
2015-05-26 10:39:38 -06:00
Gregory Nutt
315eb4b491
SAML21-Xlplained: Add options to enable XOSC32K and to use it as the DFLL source; NSH configure now uses DFLL with OSC16M source
2015-05-26 10:39:38 -06:00
Gregory Nutt
6b680686ce
Cosmetic changes to header file
2015-05-26 06:45:03 -06:00
Gregory Nutt
06df839522
Cosmetic changes to header file
2015-05-26 06:45:03 -06:00
Gregory Nutt
a00d114f0a
Rename configs/teensy to configs/teensy-2.0 to distinguish teensy-lc and teensy-3.1
2015-05-25 18:29:43 -06:00
Gregory Nutt
a841329fad
Rename configs/teensy to configs/teensy-2.0 to distinguish teensy-lc and teensy-3.1
2015-05-25 18:29:43 -06:00
Gregory Nutt
f15ed79456
Update README files
2015-05-25 13:54:17 -06:00
Gregory Nutt
3f249bf385
Update README files
2015-05-25 13:54:17 -06:00
Gregory Nutt
9c939cd519
Update README
2015-05-25 10:23:11 -06:00
Gregory Nutt
409ca03401
Update README
2015-05-25 10:23:11 -06:00
Gregory Nutt
63ece47790
SAMD20: Fixes the problem introduced with the SAML21 integration
2015-05-25 10:13:06 -06:00
Gregory Nutt
49d999f9d4
SAMD20: Fixes the problem introduced with the SAML21 integration
2015-05-25 10:13:06 -06:00
Gregory Nutt
5e1759455f
Update README
2015-05-24 17:07:34 -06:00
Gregory Nutt
36d8df161b
Update README
2015-05-24 17:07:34 -06:00
Gregory Nutt
4a097adcae
SAML21: Fix a couple of oversights in the last commit
2015-05-24 15:11:16 -06:00
Gregory Nutt
c5fc9af3a5
SAML21: Fix a couple of oversights in the last commit
2015-05-24 15:11:16 -06:00
Gregory Nutt
2a0329a8a0
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
2015-05-24 10:27:37 -06:00
Gregory Nutt
7e3508361f
SAML21: Fix issue with open loop operation; Add configuration options to select clock source
2015-05-24 10:27:37 -06:00
Gregory Nutt
a0b631de08
All minnsh configurations: Removing CONFIG_ARCH_STACKDUMP we reduce more 424 bytes. Alan Carvalho de Assis
2015-05-24 09:05:41 -06:00
Gregory Nutt
101dfb7939
All minnsh configurations: Removing CONFIG_ARCH_STACKDUMP we reduce more 424 bytes. Alan Carvalho de Assis
2015-05-24 09:05:41 -06:00
Gregory Nutt
84c663937e
Update ChangeLog
2015-05-24 07:50:57 -06:00
Gregory Nutt
7cdef22288
Update ChangeLog
2015-05-24 07:50:57 -06:00
Gregory Nutt
0dbf579aa8
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
Gregory Nutt
4adda9d428
Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis
2015-05-23 17:08:35 -06:00
Gregory Nutt
6fef2aabd9
SAML21: Add missing support for GCLK8
2015-05-23 17:02:13 -06:00
Gregory Nutt
67380a335f
SAML21: Add missing support for GCLK8
2015-05-23 17:02:13 -06:00
Gregory Nutt
9dc2a891fb
SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD
2015-05-23 13:08:28 -06:00
Gregory Nutt
fa585b66a3
SAML21: Several SERCOM fixes. No gets UART output, but at the wrong BAUD
2015-05-23 13:08:28 -06:00
Gregory Nutt
39ded5a318
SAML21: Fix some register definitions; board OSC16M frequency
2015-05-23 10:54:51 -06:00
Gregory Nutt
b246e7adf2
SAML21: Fix some register definitions; board OSC16M frequency
2015-05-23 10:54:51 -06:00
Gregory Nutt
1e726e9d2b
LPCXpresso-LPC1115: Add a minimal NSH configuration that has the file system disabled. Update README with OpenOCD instructions. From Alan Carvalho de Assis.
2015-05-23 09:25:03 -06:00
Gregory Nutt
57e918d6d5
LPCXpresso-LPC1115: Add a minimal NSH configuration that has the file system disabled. Update README with OpenOCD instructions. From Alan Carvalho de Assis.
2015-05-23 09:25:03 -06:00
Gregory Nutt
c718df6a26
SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0
2015-05-23 08:55:06 -06:00
Gregory Nutt
6bf2257d41
SAMD/L: Change ordering of some initialization steps to match Atmel sample code. Add Errate 13134 support. SAML wait states changed to 1. Sample code is using 0
2015-05-23 08:55:06 -06:00
Gregory Nutt
7df5a159c5
Update documentatino and README files for the LPCXpresso LPC1115 board support
2015-05-22 19:56:45 -06:00
Gregory Nutt
b50ed67e58
Update documentatino and README files for the LPCXpresso LPC1115 board support
2015-05-22 19:56:45 -06:00
Gregory Nutt
1cb061e06f
lpcxpresso-lpc1115: Update naming to match current coventions
2015-05-22 14:36:01 -06:00
Gregory Nutt
e4ce738b06
lpcxpresso-lpc1115: Update naming to match current coventions
2015-05-22 14:36:01 -06:00
Gregory Nutt
3fbe9b66fc
Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis.
2015-05-22 14:14:09 -06:00
Gregory Nutt
bbdb84c1f4
Initial support for the NXP LPC11 family and the LPC1115 MCU in particular. Contributed by Alan Carvalho de Assis.
2015-05-22 14:14:09 -06:00
Gregory Nutt
72c5255eda
apps/platform masks the assumption that the board directory in in-tree
2015-05-22 11:39:19 -06:00
Gregory Nutt
aa40fb55fb
apps/platform masks the assumption that the board directory in in-tree
2015-05-22 11:39:19 -06:00
Gregory Nutt
dea421b094
SAML21 misc changes
2015-05-22 11:28:02 -06:00
Gregory Nutt
332ecdd71e
SAML21 misc changes
2015-05-22 11:28:02 -06:00
Gregory Nutt
84cc27c57d
SAML21. With these changes, the board now builds without error
2015-05-22 10:36:37 -06:00
Gregory Nutt
bd23c4ad4e
SAML21. With these changes, the board now builds without error
2015-05-22 10:36:37 -06:00
Gregory Nutt
c5f5628875
SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases
2015-05-21 16:50:55 -06:00
Gregory Nutt
4542778f90
SAML21 clock config: Fix a misthink in last commit. Move setting of ONDEMAND to after clock is enabled in most cases
2015-05-21 16:50:55 -06:00
Gregory Nutt
b6091c7d83
SAML21: Clean up a few more compilation issues
2015-05-21 16:23:15 -06:00
Gregory Nutt
dde121c49d
SAML21: Clean up a few more compilation issues
2015-05-21 16:23:15 -06:00
Gregory Nutt
16bcd65b4b
SAML21: Add logic to set MCLK CPU and related dividers
2015-05-21 13:40:34 -06:00
Gregory Nutt
4097432f2c
SAML21: Add logic to set MCLK CPU and related dividers
2015-05-21 13:40:34 -06:00
Gregory Nutt
7da7bc41da
SAML21: Add FDPLL96M configuration logic
2015-05-21 11:52:38 -06:00
Gregory Nutt
7cd5f669bd
SAML21: Add FDPLL96M configuration logic
2015-05-21 11:52:38 -06:00
Gregory Nutt
1e792098f6
SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs
2015-05-21 10:47:41 -06:00
Gregory Nutt
b068185811
SAML21: Add logic to support GLCK peripheral channels; add logic to configure FDPLL lock timer and ref clock GCLKs
2015-05-21 10:47:41 -06:00
Gregory Nutt
e128c52718
SAMD/L: Move GCLK configuration logic to its own C file
2015-05-21 10:07:42 -06:00
Gregory Nutt
20d3b63946
SAMD/L: Move GCLK configuration logic to its own C file
2015-05-21 10:07:42 -06:00
Gregory Nutt
e857efdac2
Added TM4C1294NCPDT EN0_LED2 (10/100-Base-Tx). From Frank Sautter.
2015-05-20 18:36:29 -06:00
Gregory Nutt
2739d17d94
Added TM4C1294NCPDT EN0_LED2 (10/100-Base-Tx). From Frank Sautter.
2015-05-20 18:36:29 -06:00
Gregory Nutt
d467065f4a
Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
2015-05-20 18:34:15 -06:00
Gregory Nutt
0a9d3d872b
Fixes for Tiva TM4C1294NCPDT. From Frank Sautter.
2015-05-20 18:34:15 -06:00
Gregory Nutt
9489565a98
SAML21: Add some parameter checking for FDPLL96M
2015-05-20 13:51:40 -06:00
Gregory Nutt
8042d2e412
SAML21: Add some parameter checking for FDPLL96M
2015-05-20 13:51:40 -06:00
Gregory Nutt
4ce2cb5257
SAML21 minor cleanup
2015-05-20 13:00:39 -06:00
Gregory Nutt
8261197732
SAML21 minor cleanup
2015-05-20 13:00:39 -06:00
Gregory Nutt
e5a4b6ee2d
SAML32: Update some DFLL logic
2015-05-20 12:26:49 -06:00
Gregory Nutt
67a45b019d
SAML32: Update some DFLL logic
2015-05-20 12:26:49 -06:00
Gregory Nutt
065ec805c7
SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained
2015-05-19 14:32:09 -06:00
Gregory Nutt
725e3cab72
SAML21-Xplained: Update the cloned SAMD20-Xplained board configuration for specifics of the SAML21-Xplained
2015-05-19 14:32:09 -06:00
Gregory Nutt
9ff352e810
SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build
2015-05-19 11:03:24 -06:00
Gregory Nutt
857a2d08d9
SAMD/L: Hide differences in the way peripheral clocking is enabled behind macros. Some updates to saml_clockconfig.h + various fixes while working toward SAML21 build
2015-05-19 11:03:24 -06:00
Gregory Nutt
69aeab7d5f
SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go
2015-05-18 17:41:28 -06:00
Gregory Nutt
81ba1f0847
SAML21: Add interrupt header file + fix a few initial compile issues. Still a long way to go
2015-05-18 17:41:28 -06:00
Gregory Nutt
923f81ae3b
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
2015-05-18 13:16:32 -06:00
Gregory Nutt
9e1c72e3e2
Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build
2015-05-18 13:16:32 -06:00
Gregory Nutt
746217ee5c
SAMD/L: Move content of chip/sam_memorymap.h to chip.h; move chip/sam_pinmap. to sam_pinmap.h for consistency with other header files
2015-05-17 15:34:51 -06:00
Gregory Nutt
07e1e8b40b
SAMD/L: Move content of chip/sam_memorymap.h to chip.h; move chip/sam_pinmap. to sam_pinmap.h for consistency with other header files
2015-05-17 15:34:51 -06:00
Gregory Nutt
358629b6ec
Rename sam_gclk.h to samd_gclk.h. Add saml_gclk.h
2015-05-17 08:06:56 -06:00
Gregory Nutt
f7684abdd2
Rename sam_gclk.h to samd_gclk.h. Add saml_gclk.h
2015-05-17 08:06:56 -06:00
Gregory Nutt
f269bbd9f3
Refresh configuration
2015-05-14 12:27:55 -06:00
Gregory Nutt
f3caa95a1a
Refresh configuration
2015-05-14 12:27:55 -06:00
Gregory Nutt
5de39ed3c9
Rename SAMD directories and configuration variables to SAMDL so that the same build environment can support the SAML
2015-05-14 12:25:09 -06:00
Gregory Nutt
f606dea3b1
Rename SAMD directories and configuration variables to SAMDL so that the same build environment can support the SAML
2015-05-14 12:25:09 -06:00
Gregory Nutt
2870779cc3
Update README
2015-05-13 13:30:26 -06:00
Gregory Nutt
416af1b54f
Update README
2015-05-13 13:30:26 -06:00
Gregory Nutt
91ada88a2f
SAMV71-XULT: Reads from LCD memory do not work. Change configuration so that the LCD is treated as write-only
2015-05-13 11:47:47 -06:00
Gregory Nutt
98ed7bab0e
SAMV71-XULT: Reads from LCD memory do not work. Change configuration so that the LCD is treated as write-only
2015-05-13 11:47:47 -06:00
Gregory Nutt
f8bd2f4c4b
Update README
2015-05-13 10:38:54 -06:00
Gregory Nutt
5e756deef5
Update README
2015-05-13 10:38:54 -06:00
Gregory Nutt
fc0d6b5123
SAMV71-XULT: Minor updates to nxwm configuration. There are still issues
2015-05-13 10:09:32 -06:00
Gregory Nutt
5d55ef59b6
SAMV71-XULT: Minor updates to nxwm configuration. There are still issues
2015-05-13 10:09:32 -06:00
Gregory Nutt
b30ff7ed58
SAMV71-Xult: Add missing NxWM configuration settings; Fix cloning error in C++ support
2015-05-12 19:43:20 -06:00
Gregory Nutt
9e84252668
SAMV71-Xult: Add missing NxWM configuration settings; Fix cloning error in C++ support
2015-05-12 19:43:20 -06:00
Gregory Nutt
3bbacad12b
SAMV7-XULT: Add C++ support
2015-05-12 19:12:25 -06:00
Gregory Nutt
f8a51bd706
SAMV7-XULT: Add C++ support
2015-05-12 19:12:25 -06:00
Gregory Nutt
b057ebb6f1
SAMV71-XULT: Add an NxWM configuration (unverified on initial commit)
2015-05-12 18:57:30 -06:00
Gregory Nutt
0cabda1e5b
SAMV71-XULT: Add an NxWM configuration (unverified on initial commit)
2015-05-12 18:57:30 -06:00
Gregory Nutt
4c72b2eb1a
Update ChangeLog and README
2015-05-12 17:59:45 -06:00
Gregory Nutt
390ae171ba
Update ChangeLog and README
2015-05-12 17:59:45 -06:00
Gregory Nutt
dcdc23252c
Add configuration option to select touchscreen X/Y
2015-05-12 17:56:35 -06:00
Gregory Nutt
7942c2f6d5
Add configuration option to select touchscreen X/Y
2015-05-12 17:56:35 -06:00
Gregory Nutt
4883e4494b
Refresh configuration
2015-05-12 17:56:34 -06:00
Gregory Nutt
5da82577d7
Refresh configuration
2015-05-12 17:56:34 -06:00
Gregory Nutt
c132f4a520
Refresh configuration
2015-05-12 17:56:33 -06:00
Gregory Nutt
17d0918002
Refresh configuration
2015-05-12 17:56:33 -06:00
Gregory Nutt
a280358392
Fix some references to statfs being in stdio.h in documentation
2015-05-12 13:43:04 -06:00
Gregory Nutt
a4ccbd8c4a
Fix some references to statfs being in stdio.h in documentation
2015-05-12 13:43:04 -06:00
Gregory Nutt
59b5678bff
Update ChangeLog
2015-05-12 13:36:23 -06:00
Gregory Nutt
d36428fffd
Update ChangeLog
2015-05-12 13:36:23 -06:00
Gregory Nutt
c44b444135
Add maXTouch configuration data.
2015-05-12 09:48:43 -06:00
Gregory Nutt
ea2f1de30a
Add maXTouch configuration data.
2015-05-12 09:48:43 -06:00
Gregory Nutt
7009bc0065
Refresh configuration
2015-05-09 09:04:09 -06:00
Gregory Nutt
c516a11321
Refresh configuration
2015-05-09 09:04:09 -06:00
Gregory Nutt
30d7b5c476
Update TODO list
2015-05-09 08:23:11 -06:00
Gregory Nutt
4715a2e697
Update TODO list
2015-05-09 08:23:11 -06:00
Gregory Nutt
868acfe24f
Calypso Compal-E86: Updates for execution out of FLASH. From Craig Comstock
2015-05-08 18:08:38 -06:00
Gregory Nutt
be0e926730
Calypso Compal-E86: Updates for execution out of FLASH. From Craig Comstock
2015-05-08 18:08:38 -06:00
Gregory Nutt
954bf9c60b
Fix some Olimex LPC1766STK build issues that have crept in due to changes in Kconfig file
2015-05-08 14:43:30 -06:00
Gregory Nutt
956d8e717d
Fix some Olimex LPC1766STK build issues that have crept in due to changes in Kconfig file
2015-05-08 14:43:30 -06:00
Gregory Nutt
6c895c9516
teensy-lc: remap UART0 to the standard pins. From Michael Hope.
2015-05-07 17:17:54 -06:00
Gregory Nutt
bb618832eb
teensy-lc: remap UART0 to the standard pins. From Michael Hope.
2015-05-07 17:17:54 -06:00
Gregory Nutt
4a24c31797
SAMV71-XULT: Eliminate a bogus warning
2015-05-07 17:16:57 -06:00
Gregory Nutt
aa79449bbe
SAMV71-XULT: Eliminate a bogus warning
2015-05-07 17:16:57 -06:00
Gregory Nutt
9bc5ac9325
Rename compal_e86 linker script to highram.ld
2015-05-07 07:48:33 -06:00
Gregory Nutt
f9575d8ef9
Rename compal_e86 linker script to highram.ld
2015-05-07 07:48:33 -06:00
Gregory Nutt
856174a48a
Adds board support for the Teensy LC board. Support is based off the Freedom KL25Z board. LED, PWM, and UART0 have been tested. The SPI pins are mapped correctly but have not yet been tested. From Michael Hope as SourceForge patch 51.
2015-05-07 07:06:50 -06:00
Gregory Nutt
2ec584c3b4
Adds board support for the Teensy LC board. Support is based off the Freedom KL25Z board. LED, PWM, and UART0 have been tested. The SPI pins are mapped correctly but have not yet been tested. From Michael Hope as SourceForge patch 51.
2015-05-07 07:06:50 -06:00
Gregory Nutt
4c5e3d1729
LPC17 USB host: Fix some compile errors when bulk endpoints + USB debug enabled. Refresh a configuration
2015-05-06 16:15:12 -06:00
Gregory Nutt
96698619a0
LPC17 USB host: Fix some compile errors when bulk endpoints + USB debug enabled. Refresh a configuration
2015-05-06 16:15:12 -06:00
Gregory Nutt
d468285739
Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected.
2015-05-06 14:11:29 -06:00
Gregory Nutt
691d7c9819
Rename usbhost_storageinit() to usbhost_msc_initialize(). Add calls to usbhost_cdcacm_initialize() is CONFIG_USBHOST_CDCACM is selected.
2015-05-06 14:11:29 -06:00
Gregory Nutt
c6efb9c436
Update TODO list; remove issues from old board ports
2015-05-06 07:01:33 -06:00
Gregory Nutt
9aa9d661ac
Update TODO list; remove issues from old board ports
2015-05-06 07:01:33 -06:00
Gregory Nutt
6030146c18
SAMA5D OHCI: Remove a local variable that is unused when debug is disabled; refresh a configuration. Update a README
2015-05-04 07:34:29 -06:00
Gregory Nutt
1afb9315a5
SAMA5D OHCI: Remove a local variable that is unused when debug is disabled; refresh a configuration. Update a README
2015-05-04 07:34:29 -06:00
Gregory Nutt
607ff7d2fb
Update some READMEs. For all implementation of the USBHOST waiter, make sure that the waiter thread stack size is larger if the USB hub feature is enabled
2015-05-03 16:45:44 -06:00
Gregory Nutt
373a8700ee
Update some READMEs. For all implementation of the USBHOST waiter, make sure that the waiter thread stack size is larger if the USB hub feature is enabled
2015-05-03 16:45:44 -06:00
Gregory Nutt
aac16a62c8
Olimex LPC1766STK: The USB host waiter stack should be configurable because it needs to be a lot depending when using a hub
2015-05-03 16:14:08 -06:00
Gregory Nutt
f9a30b1804
Olimex LPC1766STK: The USB host waiter stack should be configurable because it needs to be a lot depending when using a hub
2015-05-03 16:14:08 -06:00
Gregory Nutt
af319b779d
Refresh configuration
2015-05-03 16:13:09 -06:00
Gregory Nutt
f48d9f93ce
Refresh configuration
2015-05-03 16:13:09 -06:00
Gregory Nutt
1c196e7fcd
SAMA5 EHCI: Fix some compile issues when hub support is enabled
2015-05-02 14:00:12 -06:00
Gregory Nutt
534fb72355
SAMA5 EHCI: Fix some compile issues when hub support is enabled
2015-05-02 14:00:12 -06:00
Gregory Nutt
9946ea5d21
USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port
2015-05-02 10:44:18 -06:00
Gregory Nutt
c2a3f936aa
USB host: Need to include the port structure when disconnecting, otherwise may destroy a root hub port
2015-05-02 10:44:18 -06:00
Gregory Nutt
32200cad22
SAMA5 OHCI: Implement asynchronous I/O needed for hub support
2015-05-02 09:38:08 -06:00
Gregory Nutt
977c9a5d27
SAMA5 OHCI: Implement asynchronous I/O needed for hub support
2015-05-02 09:38:08 -06:00
Gregory Nutt
d66eb8b23c
Merge remote-tracking branch 'origin/master' into usbhub
2015-05-01 15:38:48 -06:00
Gregory Nutt
d1283484ac
Merge remote-tracking branch 'origin/master' into usbhub
2015-05-01 15:38:48 -06:00
Gregory Nutt
e0e4624556
SAMA5D USB hub: Fix some trace statements; update some README files
2015-05-01 15:38:03 -06:00
Gregory Nutt
3efeb8909b
SAMA5D USB hub: Fix some trace statements; update some README files
2015-05-01 15:38:03 -06:00
Gregory Nutt
82c36c628e
Update README files
2015-05-01 12:09:03 -06:00
Gregory Nutt
c2701da319
Update README files
2015-05-01 12:09:03 -06:00
Gregory Nutt
22263ddf5c
SAMA5D3 Xplained: Update some comments, initialize USB bus power state
2015-05-01 11:46:38 -06:00
Gregory Nutt
ffb3a6fa16
SAMA5D3 Xplained: Update some comments, initialize USB bus power state
2015-05-01 11:46:38 -06:00
Gregory Nutt
0d6070d08b
SAMA5Dx board: Don't register USB classes that are not enabled in the configuration
2015-05-01 10:52:17 -06:00
Gregory Nutt
666b17db33
SAMA5Dx board: Don't register USB classes that are not enabled in the configuration
2015-05-01 10:52:17 -06:00
Gregory Nutt
299eb14689
Get SAMA5D configurations ready for USB hub testing
2015-05-01 10:12:41 -06:00
