sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
54,938 Commits 1 Branch 0 Tags 291 MiB
bug/duktape-crash-ctrl-c
Commit Graph

900 Commits

Author SHA1 Message Date
Gregory Nutt
bd5d079c02 arch/mips/src/pic32m[x|z]/pic32m[x|z]-ethernet.c: Fix a comparison in a debug assertion. Should be <= vs <. Noted by Anonymous in Bitbucket Isue 134. 2018-11-21 12:35:43 -06:00
Gregory Nutt
09f4dee6bc All network drivers! Change pre-processor logic that selects the high priority work queue or gives preferential treatment to the high priority work. All network logic must run on the low priority work queue! Or suffer the consequences. 2018-11-21 07:57:26 -06:00
Gregory Nutt
7a45fc6f1c arch/arm/src/max326xx: Add framework for MAX326XX standard DMA support. 2018-11-20 08:09:03 -06:00
Xiang Xiao
dbf01d12b7 Assertions: Identify the running task correctly when dumping task state information. It takes time to switch to the target task after g_readytorun has been modified. If panic/assert happen during this period, the dump will contain the incorrect and confusing information due to the difference between the real running task and the return value of this_task(). This change resolve this problem by adding g_running_task to track the real running task through the context switch. 2018-11-15 07:11:51 -06:00
Xiang Xiao
543f4ed8ec arch/ all assertion functions: up_assert move the register dump to first make the more important info first 2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25 arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace 2018-11-11 12:52:36 -06:00
Gregory Nutt
2b3ec4172d arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'. 2018-11-10 14:06:46 -06:00
Gregory Nutt
9c3e65f15f net/mld: Fix a few compilation problems that cropped up in a different network configuration. Fix a logic error in setting the 'Other Querier Present' timer. Various cosmetic improvements. 2018-11-07 18:21:21 -06:00
Gregory Nutt
68e45d0453 Reported by Anonymous in Bitbucket Issue #129: 
When MIPS port is built for microMIPS and then loaded as an application, the __start entry point is entered in microMIPS mode, but the CPU core initialization code there misses to set the config3ISAOnExc bit to 1. Subsequently, exceptions are entered in MIPS32 mode, but the code base was built for microMIPS.
 2018-11-07 10:48:33 -06:00
Gregory Nutt
6d93658ff8 Add new configuratin CONFIG_NET_MCASTGROUP. This option is selected automatically if either CONFIG_NET_IGMP or CONFIG_NET_MLD are selected. Most conditional logic based on CONFIG_NET_IGMP replaced with conditioning on CONFIG_NET_MCASTGROUP. 2018-10-31 15:03:51 -06:00
Ouss4
d3d67508a3 arch/mips/src/mips32/Toolchain.defs: Add toolchain flags for the pinguino toolchain under Linux. 2018-10-16 12:25:37 -06:00
Ouss4
3a594d5a1f arch/mips/src/pic32mz/pic32mz-head.S: Initialize the global pointer in all shadow sets. 2018-10-16 12:25:37 -06:00
Ouss4
f7e4f614ef arch/mips/src/pic32mz/pic32mz-serial.c: Fix a typo in assignment of TTYS0 to UART6 2018-10-16 12:25:37 -06:00
Gregory Nutt
4d75901cc4 arch/mips/include/mips32/cp0.h: Fix some copy-paste errors that cause malformed comments and syntax errors when certain CP0 CONFIG1 bits are referenced. Note in Issue 123 by Anonymous. 2018-10-12 14:52:05 -06:00
Gregory Nutt
9546481054 Fix some typographical errors. 2018-09-14 06:55:45 -06:00
Gregory Nutt
9bc951a335 Rename devif_loopback_out to devi_loopback 2018-08-25 08:33:21 -06:00
dongjianli
19e16cb1ba up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined 2018-08-24 14:50:45 -06:00
Xiang Xiao
0074afa0ac net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire. 2018-08-24 09:21:33 -06:00
Xiang Xiao
36b46a6a40 arch/ and task/sched: vfork operation needs to allocate and copy the task argument too. Also correction of the address correction cannot depend on the stack pointer since it is not available in all architectures. Rather callculate the offset from the stack allocation pointer 2018-08-24 07:43:00 -06:00
Xiang Xiao
e1202d2ed3 Replace all ASSERT with DEBUGASSERT to save the code space 2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea Replace non critical PANIC with DEBUGPANIC to save the code space 2018-08-24 06:21:15 -06:00
xuanlin
2c93467436 pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator. 2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4 configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y. 2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong. 2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2 Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay. 2018-08-19 10:06:36 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. 
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
 2018-07-04 14:10:40 -06:00
Gregory Nutt
d52b65b06d Fix several configuration varaibles that were defined in multiple Kconfig files and/or lacked any scoping and the naming. 
Squashed commit of the following:

    lpc17, pic32mx, pic32mz:  Fix duplicated, improperly scoped configuration variable names:  CONFIG_PHY_SPEED100 and CONFIG_PHY_AUTONEG.
    lpc17, pic32mx, pic32mz:  Fix another duplicated configuration variable name:  CONFIG_PHY_FDUPLEX.
    lpc17:  Fix naming scope: CONFIG_NET_HASH -> CONFIG_LPC17_ETH_HASH.
    lpc17:  Fix naming scope: CONFIG_NET_WOL -> CONFIG_LPC17_ETH_WOL.
    lpc17, pic32mx, pic32mz:  Fix naming scope: CONFIG_NET_ -> CONFIG_LPC17_ETH_PRIORITY.
    lpc17, pic32mx, pic32mz:  Fix another duplicated configuration variable name:  CONFIG_NET_NTXDESC and CONFIG_NET_NRXDESC.
    lpc17:  Fix naming scope: CONFIG_NET_EMACRAM_SIZE -> CONFIG_LPC17_EMACRAM_SIZE.
 2018-06-30 11:55:41 -06:00
Gregory Nutt
a94e3284b3 syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic. 2018-06-07 16:29:16 -06:00
Gregory Nutt
977d41d519 Based on a change recommended by Mark Shulte: 
Signal handlers maybe run with interrupts enabled or disabled, depending on how the task the received the signal was blocked. (i.e.: If sem_wait() is called, then we disable interrupts, then block the currently running task). This could be dangerous, because user code would be running with interrupts disabled.

This change forces interrupts to be enabled in up_sigdeliver() before executing the signal handler calling up_irq_enable() explicitly.  This is safe because, when we return to normal execution, interrupts will be restored to their previous state when the signal handler returns.
 2018-06-06 09:54:30 -06:00
Gregory Nutt
9222f50e1c arch/: Make sure the up_irq_enable() is available on all architectures. I will not be able to test all of these new versions of this function so this may break things for awhile. 2018-06-06 09:25:40 -06:00
Gregory Nutt
d52c63f632 Change all references from OSX to macOS 2018-06-01 13:25:50 -06:00
Gregory Nutt
f2a89813f2 Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository. 2018-05-29 11:36:21 -06:00
Gregory Nutt
6435a2b25b arch/mips/src: All MIPS architctures now support CONFIG_ARCH_IDLE_CUSTOM 2018-05-07 11:17:19 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
de6b13b3ab Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required. 2018-03-04 08:07:07 -06:00
Gregory Nutt
a524b33f2c Update some comments 2018-02-11 10:30:45 -06:00
Gregory Nutt
642d7e3ce2 Squashed commit of the following: 
configs/flipnclick-pic32mz:  Add an nxlines configuration for use in testing the custom HiletGo Click board.
    arch/mips/src/pic32mz:  Correct some SPI-related typos.  configs/flipnclick-pic32mz: Finishes integration of HiletGo OLED. drivers/lcd:  Finish support for HiletGo OLED.
    drivers/lcd:  Add configuration support for HiletGo OLED.  configs/flipnclick-pic32mz:  Add board support for HiletGo OLED.
 2018-02-10 09:43:12 -06:00
Gregory Nutt
73ec87109f arch/mips/src/mips32: In up_idle, the kludge that was conditionally enabled if the work queue was enable appears to be needed even when he work queue is not enabled on the PIC32MZ. 
arch/mips/src/pic32mz: Fix some typos in debug instrumentation in pic32mz-gpio.c; fix some types releated to UART5 configuration in pic32mz-serial.c.

configs/flipnclick-pic32mz/nsh:  Switch serial console to UART3.  There is some problem with the UART4 RX pin documentation or configuration.
 2018-02-09 11:11:44 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
da50646bcf sched/wdog: wd_start() is an internal OS function and should not set the errno value. Reviewed and updated every call to wd_start() to verify if return value is used and if so if the errno value is accessed. 2018-01-31 10:09:14 -06:00
Gregory Nutt
a8b6be4aaf The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method. 2018-01-22 08:17:45 -06:00
Gregory Nutt
7d4451ee86 Squashed commit of the following: 
configs/flipnclick-pic32mz:  Switch the serial console to UART4.  Clean up some minor issues the LED options.
    configs/flipnclick-pic32mz:  Add support for two on-board buttons:  T1 and T2.
    configs/flipnclick-pic32mz:  Adds basic board support for the Mikroe Flip&Click PIC32MZ board.  Initial commit is just the configs/pic32mz-starterkit with some name chanages.
 2018-01-08 14:21:49 -06:00
Gregory Nutt
6fe1f5a96c Squashed commit of the following: 
arch/mips/src/pic32mz:  Commits the basic architecture port for the PIC32MZEF.
    arch/mips/src/pic32mz:  Begin adding PIC32MZEF files. Initial commit are simply PIC32MZEC files with name changes.
    arch/mips/include/pic32mz:  Add support for the PIC32MZEF family.
 2018-01-08 10:01:23 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Gregory Nutt
1c5ec07414 arch/: Remove dangling space at the end of lines. 2017-06-28 13:16:48 -06:00
Gregory Nutt
7fe112fe4c Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition. 2017-05-13 11:44:12 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
b6b16bf4da Fix forward references that were mangled in last large changes. 2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229 misc archs 2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643 Correct mispelling 2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1 net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment. 2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
32383556fd PIC32MZ: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:23:45 -06:00
Gregory Nutt
1564b384e1 PIC32MX: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:10:05 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
8ee2e8d8b0 Most Ethernet drviers: Check if the poll timer is running before restarting it at the end of each TX. 2017-02-24 15:58:17 -06:00
Gregory Nutt
1d290c2b37 setvbuf: Add support for disabling I/O buffering. Initially cut; untested. 2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110 up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list. 2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts. 2017-01-13 11:08:24 -06:00
Gregory Nutt
13d00344c9 Add configuration to prevent selection of Windows native toolchains when using Ubuntu under Windows 10 2017-01-02 07:16:47 -06:00
Gregory Nutt
3a0413c048 Back out most of 34be3e7c3c and update README again. Windows native tools cannot be used with Ubuntu under Windows 10 now. For Cygwin, that support depends on the 'cygpath -w' tool to convert POSIX paths to Windows paths. There is no corresponding tool for Ubuntu under Windows 10. 2017-01-01 16:29:03 -06:00
Gregory Nutt
34be3e7c3c Add configuration support for builds with Ubuntu under Windows 10 2017-01-01 15:34:23 -06:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
41e35c88bf eZ80 Ethernet now supports CONFIG_NET_NOINTS 2016-12-03 10:43:35 -06:00
Gregory Nutt
eba1e076ec PIC32MX/Z Ethernet: Now supports CONFIG_NET_NOINT 2016-12-03 09:50:14 -06:00
Gregory Nutt
934aded293 arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER 2016-11-29 16:06:48 -06:00
Gregory Nutt
b0dffdc2ca Fix a number of header files with mismatched 'extern C {' and '}' 2016-11-05 07:25:05 -06:00
Paul A. Patience
912fe06a86 Add architecture-specific inttypes.h 2016-10-27 16:01:38 -04:00
Gregory Nutt
d41008e220 Update some header commments 2016-08-06 18:16:31 -06:00
Gregory Nutt
4b4dbc79a2 Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h 2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05 devrandom_register() must be called before devurandom_register() 2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06 Rename up_rnginitialize to devrandom_register 2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write. 2016-07-17 06:42:26 -06:00
Gregory Nutt
e7f0a56498 Correct some comments 2016-07-15 13:13:53 -06:00
Gregory Nutt
7b298a828d up_pminitialize() needs to be called from instances of up_initialize() 2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97 All architectures: Add logic to automatically register /dev/ptmx a boot time 2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57 Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model. 2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27 Eliminate a warning 2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
ac18dc27ca Common/Calypso/C5471: Convert *err() to either *info() or add ERROR:, depending on if an error is reported 2016-06-17 15:22:48 -06:00
Gregory Nutt
b39e53391d Add underscore at beginning of alert() as well 2016-06-16 12:38:05 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
6f08216621 Centralize definitions associated with CONFIG_DEBUG_SYSCALL 2016-06-16 08:12:38 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Gregory Nutt
a97d3ae707 Centralize definitions associated with CONFIG_DEBUG_GPIO 2016-06-15 09:20:23 -06:00
Gregory Nutt
64fa0ab51f Fix Kconfig dependency 2016-06-14 12:36:59 -06:00
Gregory Nutt
080aa07110 arch/mips/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 12:34:29 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
d5275e48d0 Eliminate some warnings 2016-06-13 13:16:03 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
5ef3e3e215 Replace confusing references to uIP with just 'the network' 2016-05-30 11:52:07 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
fb484a581f All GCC final arch/*/src/Makefiles: Allow --start-group and --end-group to be redefined for the case where GCC is used to link (instead of LD). Suggested by Paul Alexander Patience. 2016-05-17 10:43:15 -06:00
Gregory Nutt
99e695398c Rename up_boot to arm_boot 2016-05-12 13:42:49 -06:00
Gregory Nutt
f7d3b8147f Rename CONFIG_NET_MULTICAST to avoid name conflicts 2016-03-20 13:14:36 -06:00
Gregory Nutt
bd846c2e72 All architectures: Register the schedule note driver if enabled 2016-03-17 17:00:59 -06:00
Gregory Nutt
4d4f54a789 Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs 2016-03-09 13:41:48 -06:00
Gregory Nutt
9c63736c98 Standard some naming if code sectino comments 2016-02-21 18:06:09 -06:00
Gregory Nutt
83bc1c97c3 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:11:25 -06:00
Gregory Nutt
70e502adb0 Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-13 19:11:09 -06:00
Gregory Nutt
b373894fbc MIPS: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 16:49:34 -06:00
Gregory Nutt
1166e311b0 Networking: Remove the HSEC argument from devif_timer. 2016-02-03 11:17:15 -06:00
Gregory Nutt
3b6a502eff For LK MCUs, rename up_spiinitialize to kl_spibus_initialize 2016-01-26 16:19:03 -06:00
Gregory Nutt
ba17c8ea18 For PIC32MX/Z MCUs, rename up_spiinitialize to pic32mx/z_spibus_initialize 2016-01-26 15:47:42 -06:00
Gregory Nutt
b7cbbab761 Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:10:21 -06:00
Gregory Nutt
4bd6adb725 Add dummy hwfeatures method to all SPI interfaces 2016-01-23 15:09:38 -06:00
Gregory Nutt
10001f8556 WINTOOl should be selected only for Cygwin. MSYS and native should not have it. 2016-01-09 16:34:33 -06:00
Gregory Nutt
fe94318bb4 PIC32MX/MZ: Fix error in assember macro. Noted by Tilak Tangudu 2016-01-05 10:04:50 -06:00
Gregory Nutt
71c289ce4f Rename all architecture files of form xyz_internal.h to just xyz.h 2015-12-29 18:07:11 -06:00
Gregory Nutt
927b1dcc1f Initialize the telnet factory as part of the common architecture intialization 2015-12-07 11:40:29 -06:00
Gregory Nutt
e5e631e57f include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics. 2015-11-26 12:07:18 -06:00
Gregory Nutt
2afd4595e4 Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES 2015-11-26 06:59:35 -06:00
Gregory Nutt
4aa3dcb51a __KERNEL__ should be defined when compiler architecture specific logic 2015-11-25 18:05:36 -06:00
Gregory Nutt
14d7ede265 All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y 2015-11-25 17:10:41 -06:00
Gregory Nutt
79df561669 Rename board_led_off to board_autoled_off 2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3 Rename board_led_on to board_autoled_on 2015-11-01 09:07:06 -06:00
Gregory Nutt
4a46a872bd arch/mips: fix some spacing and alignment issues 2015-10-12 08:18:03 -06:00
Gregory Nutt
7a63e976ad Remove TABs 2015-10-04 16:00:42 -06:00
Gregory Nutt
6fc6d17760 Fix some spacing problems 2015-10-04 14:59:08 -06:00
Gregory Nutt
9caf33e13b Standardize the width of all comment boxes in C header files 2015-10-03 07:28:30 -06:00
Gregory Nutt
7ced84c5f0 Standardize the width of all comment boxes in C files 2015-10-03 07:25:03 -06:00
Gregory Nutt
36726b1bc4 Standardize the width of all comment boxes in header files 2015-10-02 17:42:29 -06:00
Gregory Nutt
26347891ac Apply same fix for ARMv7-M to other architectures 2015-09-30 11:21:04 -06:00
Gregory Nutt
26eada3446 In all up_initialize() functions, automatically initialize TUN driver is so configureded 2015-09-06 09:35:29 -06:00
Paul A. Patience
a0dc724a5d Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1. 2015-09-01 13:47:06 -04:00
Gregory Nutt
01cfe8c315 Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically 2015-08-24 14:25:49 -06:00
Gregory Nutt
ba6c0b3fa3 Fix more common typos 2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a Fix some common typos 2015-08-16 10:59:10 -06:00
Gregory Nutt
0843af5367 Fixes that call sched_resume_scheduler and sched_suspend_scheduler must include nuttx/sched.h 2015-07-29 16:51:26 -06:00
Gregory Nutt
eddf8161a5 Add scheduler resume/suspend calls to all implementations of up_release_pending() 2015-07-26 10:13:29 -06:00
Gregory Nutt
37969b8279 Add scheduler resume/suspend calls to all implementations of up_reprioritize_rtr() 2015-07-26 09:46:28 -06:00
Gregory Nutt
838c5355eb Correct resume scheduler hooks and add suspend scheduler hooks to all implementations of up_unblock_task 2015-07-26 09:07:47 -06:00
Gregory Nutt
a92c0a10ab Add scheduler resume/suspend calls in all implementations of up_block_task() 2015-07-26 08:31:23 -06:00
Gregory Nutt
9d98177daa Add logic to reset the replenish the sporadic scheduler when a task is resumed 2015-07-24 09:54:28 -06:00
Gregory Nutt
8e4f3bddb6 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
6129df90d6 PIC32 USB device: Fix some backward conditional compilation; fix some warnings 2015-07-03 14:37:46 -06:00
Gregory Nutt
35bd9756ff PIC32 SPI: Fix some backward conditional compilation 2015-07-03 14:36:56 -06:00
Gregory Nutt
e7177afca4 MIPS32 header: Missing comma in prototype. How did that happen 2015-07-03 14:36:19 -06:00
Gregory Nutt
fb926e7283 Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
29136e51cc Clean up and review of header files for conformance to standards 2015-06-12 19:26:01 -06:00
Gregory Nutt
c07a9632cc Clean up and review of header files for conformance to standards 2015-06-12 19:17:42 -06:00
Gregory Nutt
7bd3d5eaf1 Clean up and review of header files for conformance to standards 2015-06-12 19:00:52 -06:00
Gregory Nutt
38735fafeb More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
d77a19f0a2 Two r's and only two r's in the word interrupt 2015-04-23 14:04:43 -06:00
Gregory Nutt
ae15c6963c Make some file section headers more consistent with standard 2015-04-08 08:04:12 -06:00
Gregory Nutt
ef1dda9207 PIC32MZ Ethernet: Add support for LAN4720A and fix IRQ namespace. From Kristopher Tate 2015-03-29 07:18:17 -06:00
Gregory Nutt
70dc3d68c5 PIC32MZ: Correct the base address of Ethernet registers. From Kristopher Tate 2015-03-29 07:15:29 -06:00
Gregory Nutt
947d1056ac PIC32MZ: Rename Ethernet files to proper convention. From Kristopher Tate. 2015-03-29 07:10:13 -06:00
Gregory Nutt
b65f7f0b8a Add support for LAN8740 2015-03-23 15:34:10 -06:00
Gregory Nutt
a885c05861 PIC32MZ: Clone PIC32MX Ethernet driver to PIC32MZX (not yet verified) 2015-03-23 08:10:49 -06:00
Gregory Nutt
c52868bebe PIC32MZ: Correct conversion of IRQ nubmers to IRSx register addresses. From Kristopher Tate 2015-03-22 08:41:54 -06:00
Gregory Nutt
60529baf3d PIC32MZ: Add missing call to initialize peripheral clocking. From Kristopher Tate 2015-03-22 08:15:26 -06:00
Gregory Nutt
16ece4e4bc PIC32MZ: PPS needs to start from the SFR base address. Fix from Kristopher Tate 2015-03-22 08:13:28 -06:00
Gregory Nutt
f172c0b17f Fix backward help instructions in a Kconfig file 2015-03-21 17:02:15 -06:00
Gregory Nutt
0a13a27fca More changes for PIC32MZ build under XC32 2015-03-21 16:38:24 -06:00
Gregory Nutt
000381db37 PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane 2015-03-17 14:50:11 -06:00
Gregory Nutt
48efd2a6a8 PIC32MZ: Fixes from Kristopher Tate 2015-03-11 10:25:51 -06:00
Gregory Nutt
9d32caaa2c SAMV7: Add serial driver 2015-03-08 10:15:42 -06:00
Gregory Nutt
a5043d5e60 Add support for dumping board-specific information on assertion. From David Sidrane 2015-03-04 07:00:29 -06:00
Gregory Nutt
b17303e8ab PIC32MZ: Add DMA register definition header file 2015-03-03 15:57:47 -06:00
Gregory Nutt
e290a10fa6 PIC32MZ: Add I2C register definition file 2015-03-03 14:40:09 -06:00
Gregory Nutt
ef23616f8f PIC32MX: Copy some of the configuration updates from PIC32MZ 2015-03-03 13:16:58 -06:00
Gregory Nutt
4183594466 PIC32MZ SPI: Implement exchange() method; update SPI_REGDEBUG configuration and clean up implementation 2015-03-03 12:23:27 -06:00
Gregory Nutt
a3464c54bd PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure 2015-03-03 10:06:49 -06:00
Gregory Nutt
da2319a27f PIC32MZ: Default SPI configuration setting is backward; refresh configuration 2015-03-03 09:16:10 -06:00
Gregory Nutt
1269fe8b58 PIC32MZ: Add a basic SPI driver 2015-03-03 08:58:27 -06:00
Gregory Nutt
9cb90824a1 PIC32MZ Starter Kit: Add support for on-board buttons 2015-03-02 10:01:10 -06:00
Gregory Nutt
625cd7b43a PIC32MZ: Implement support for IO port interrupts 2015-03-02 09:24:43 -06:00
Gregory Nutt
7ae730c810 PIC32MZ: Add ability to select flash ECC options 2015-03-01 09:08:44 -06:00
Gregory Nutt
b9f1e7e301 PIC32MZ: Fix yet another error in DEVCFG settings 2015-02-28 14:35:40 -06:00
Gregory Nutt
9377ec2f80 PIC32MZ: More fixups to DEVCFG settings. Still can't debug 2015-02-28 14:18:22 -06:00
Gregory Nutt
18b7234ad7 PIC32MZ: Ooops DMTCNT maximum value still bad 2015-02-28 13:48:16 -06:00
Gregory Nutt
0c7a1382b2 PIC32MZ: Fix reserved RAM for MPLABX; Revert FPLLRNG calculation; Fix maximum DMTCNT value 2015-02-28 12:49:03 -06:00
Gregory Nutt
f0a00f685a PIC32MZ: Fix some configuration settings and POSC mode should be external clock 2015-02-28 11:54:47 -06:00
Gregory Nutt
ee84648f96 PIC32MZ: Add an option to use the MIPS32 or the microMIPS ISA 2015-02-28 08:22:37 -06:00
Gregory Nutt
429863f348 arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions 2015-02-27 17:19:38 -06:00
Gregory Nutt
c0d2e33288 PIC32MZ: Correct a few more DEVCFG issues 2015-02-27 16:20:28 -06:00
Gregory Nutt
a7c1053f9d PIC32MZ: Review DEVCFG setting; adjust a few to match example code 2015-02-27 10:54:18 -06:00
Gregory Nutt
7378a97c74 PIC32MZ: Fix some repeated typos and work around an issue with passing defined parameters to a macro that takes multiple parameters 2015-02-26 15:39:57 -06:00
Gregory Nutt
a688cdc2ee PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs 2015-02-26 15:05:11 -06:00
Gregory Nutt
db9b6b5f1a PIC32MZ: Add peripheral pin selection register definitions 2015-02-26 13:19:40 -06:00
Gregory Nutt
6961f84e62 Costmetic updates comments and style; Add NFS dependency on IPv4 2015-02-26 06:04:23 -06:00
Gregory Nutt
a4d514c79b PIC32MX/Z: Partial review of PIC32MZ cp0 register -- need to do more; Also found issues with definitions for PIC32MX -- need to be retested 2015-02-25 13:33:09 -06:00
Gregory Nutt
2c929aa55f PIC32MZ: Add file for GPIO interrupt support. There are issues so configuration is EXPERIMENTAL for now 2015-02-25 11:09:04 -06:00
Gregory Nutt
8f8ed30d52 PIC32MZ: Add IOPort header file and GPIO configuration logic 2015-02-25 10:43:12 -06:00
Gregory Nutt
1b4bc931cd Adjust microMIPS compile options to enable interlinking with 32-bit code 2015-02-25 09:54:48 -06:00
Gregory Nutt
b99ff9e03b Refresh configuration 2015-02-25 07:22:58 -06:00
Gregory Nutt
0d6ba023a1 PIC32MZ: Add serial driver 2015-02-24 19:44:25 -06:00
Gregory Nutt
c3d282df7b PIC32MZ: Add low level UART support 2015-02-24 17:23:56 -06:00
Gregory Nutt
87faa1008f PIC32MZ: Add UART register definition header file 2015-02-24 17:00:14 -06:00
Gregory Nutt
65d762f902 PIC32MZ: Add error exception handling and interrupt decode logic 2015-02-24 16:11:30 -06:00
Gregory Nutt
6798e67177 PIC32MZ: Add support for a timer interrupt 2015-02-24 15:36:08 -06:00
Gregory Nutt
d0940671cf PIC32MZ: Add interrupt controller support 2015-02-24 14:50:54 -06:00
Gregory Nutt
acef552fac PIC32MZ: Add interrupt controller register definitions 2015-02-24 13:16:04 -06:00
Gregory Nutt
6cf496ee67 PIC32MX: Standardize of naming in comments 2015-02-24 11:32:15 -06:00
Gregory Nutt
f5a0fb060d PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset 2015-02-24 11:16:32 -06:00
Gregory Nutt
354e5a9a11 PIC32MZ: Add beginnings of CPU initialization logic. Still some bad logic for setting up peripheral clocking 2015-02-24 09:30:30 -06:00
Gregory Nutt
15579510e8 PIC32MZ: Fix some PLL setup logic 2015-02-23 17:27:28 -06:00
Gregory Nutt
db10058d27 PIC32MZ: Fix an error in the branch target of the hard-coded power up reset branch 2015-02-23 17:09:57 -06:00
Gregory Nutt
9e92b9041b PIC32MZ: Most related to start up file a FLASH device configuration setup 2015-02-23 16:36:35 -06:00
Gregory Nutt
cfd139e8af PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected 2015-02-23 12:09:34 -06:00
Gregory Nutt
9a4f360265 PIC32MZ: Resolve a PIC32 dependency in the generic MIPS32 code 2015-02-23 11:56:16 -06:00
Gregory Nutt
b7a8a1f8aa Finishes PIC32MZ device configuration definitions 2015-02-23 09:58:34 -06:00
Gregory Nutt
d75acb630d PIC32MZ: Add memorymap and devcfg header files 2015-02-22 16:21:12 -06:00
Gregory Nutt
5559b72abd PIC32MZ: Framework for startup function. Still has too much PIC32MX garbage in it to be credible 2015-02-22 14:30:53 -06:00
Gregory Nutt
9c9fc13b6c MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go 2015-02-22 13:45:59 -06:00
Gregory Nutt
a81ebff6e0 Remove support for obsolete PIC32 toolchain configuration names 2015-02-22 12:14:20 -06:00
Gregory Nutt
024a5cb278 PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig' 2015-02-22 10:53:24 -06:00
Gregory Nutt
f273bcfa82 Fix a typo that prevents building PIC32... How long has that been there? 2015-02-21 19:41:59 -06:00
Gregory Nutt
c5b3e3e7aa Current Pinguino toolchain uses prefix p32 instead of mips 2015-02-21 19:41:26 -06:00
Gregory Nutt
8bac6b71ce SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville. 2015-02-08 06:53:24 -06:00
Gregory Nutt
30b141e2c8 Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless 2015-01-24 06:49:51 -06:00
Gregory Nutt
9588b0e7a7 All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called 2015-01-21 11:36:33 -06:00
Gregory Nutt
723b7fc430 Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address. 2015-01-20 15:52:25 -06:00
Gregory Nutt
f6063c3896 Networking: Add missing raw/packet socket support to all Ethernet drivers 2015-01-20 15:14:29 -06:00
Gregory Nutt
07132f462f Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly. 2015-01-20 06:26:14 -06:00
Gregory Nutt
ac69e11a5f Networking: All Ethernet drivers: Call ipv6_input if IPv6 is enabled and an IPv6 packet is received 2015-01-15 09:31:23 -06:00
Gregory Nutt
836a8b1625 - Rename devif_input() ipv4_input() 
- Copy net/devif/devif_input.c to ipv6_input.c.  Remove all IPv4-specific logic.
- Rename net/devif/devif_input.c to ipv4_input.c.  Remove all IPv6-specific logic
- Split IPv4 header structure out as net_ipv4hdr_s from net_iphdr_s
 2015-01-15 08:03:56 -06:00
Gregory Nutt
6bc54c3541 Networking: Condition certain ARP logic on CONFIG_NET_ARP in all Ethernet drivers 2015-01-15 07:07:39 -06:00
Gregory Nutt
2330c9c842 Rename CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU is all MCU Ethernet drivers 2014-11-16 08:10:06 -06:00
Gregory Nutt
bf984b2b3a Netwoek: Ada a parameter to netdev_register() to indicate the link protocol supported by the driver. Use this value to replace some logic commited yesterday 2014-11-15 08:22:51 -06:00
Gregory Nutt
60d2547cd7 Move selection for CONFIG_SERIAL_TERMIOS out of MCU Kconfigs to common drivers/serial/Kconfig. Add CONFIG_ARCH_HAVE_SERIAL_TERMIOS to indicate if an MCU supports TERMIOS 2014-10-27 11:31:16 -06:00
Gregory Nutt
4b4f3212f3 For PIC32MX7, DEVCFG0 bit 2 must be set 2014-10-09 14:03:54 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
9c6fea03d0 MIPS: Move address environment switch from the task switchers to the interrupt handler. That may save doing the action multiple times per interrupt 2014-08-28 07:16:14 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9 Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
8dbc4714c5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
ae82fa65a6 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
25d4ff745b More trailing whilespace removal 2014-04-13 16:22:22 -06:00
Gregory Nutt
c708eff608 Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
33d5d24964 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
66df3afd46 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
5b9f1f54c2 Add option to dump buffered USB trace data on an assertion 2014-03-20 10:56:30 -06:00
Gregory Nutt
07454e9241 configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools 2014-03-01 11:10:30 -06:00
Gregory Nutt
74c50c12de configs/mirtoo/nsh converted to use the kconfig-frontends tools 2014-03-01 10:49:19 -06:00
Gregory Nutt
a26b03d0d0 rename up_led*() functions to board_led_*() 2014-01-24 14:28:49 -06:00
Gregory Nutt
231889c888 The optimization level can now be selected as part of the configuration 2014-01-24 07:45:35 -06:00
Gregory Nutt
f53f269a84 Kconfigs: Interrupt prioritization should not be automatically selected 2013-12-20 08:42:54 -06:00
Gregory Nutt
d01808c603 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00
Gregory Nutt
b8085906b9 Extend stack debug logic to include IDLE and interrupt stacks. Also color the heap as well. Based on suggestions from David Sidrane 2013-11-01 11:16:51 -06:00
Gregory Nutt
4aaee6fb3c Clean up some naming: fd vs. fildes vs. filedes and filep vs filp 2013-09-28 16:50:07 -06:00
Gregory Nutt
52b0a16cd3 Move CONFIG_NET_DUMPPACKET from LPC17 and STM32 to commong network drivers. Automatically enabled CONFIG_NETDEVICES when any Ethernet driver is enabled 2013-09-25 11:50:05 -06:00
Gregory Nutt
82cd614b66 Add prefex ETH0 to all PHY configurations to support multiple NICs 2013-09-17 10:45:07 -06:00
Gregory Nutt
56f9092a87 Fix all occurrences of "the the" in documentation and comments 2013-08-27 09:40:19 -06:00
Gregory Nutt
dfe6452b8e Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes 2013-08-11 17:11:32 -06:00
Gregory Nutt
2f772c84fd Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_ 2013-07-26 10:09:17 -06:00
Gregory Nutt
a954eb76b2 Created new directories to hold SPI-related files 2013-07-01 08:11:54 -06:00
Gregory Nutt
8ff1402958 .dSYM only needs to be in the same .gitignore files as .exe 2013-05-30 15:02:04 -06:00
Gregory Nutt
f0c36e422f Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files 2013-05-30 14:45:31 -06:00
Gregory Nutt
34c9e7284b Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration 2013-05-28 13:36:01 -06:00
Gregory Nutt
03478d02aa Fix Sure PIC32 LOOPSPERMSEC 2013-05-27 16:29:41 -06:00
Gregory Nutt
f7ef927019 Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional. 2013-05-26 16:44:53 -06:00
Gregory Nutt
3aa94411be Remove up_assert_code 2013-04-25 15:19:59 -06:00
Gregory Nutt
91e6580aff Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit 2013-04-24 07:17:49 -06:00
Gregory Nutt
803a860d34 New Kconfig convention: Extra indentation in comments will render as HTML preformatted text 2013-04-22 09:10:58 -06:00
Gregory Nutt
65fec0683a _exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit() 2013-04-18 16:15:20 -06:00
Gregory Nutt
1a07e950ea Move LPC17xx IOCON register definitions from lpc17_gpio.h to lpc17_iocon.h; fix a few more .gitignore files 2013-04-04 18:12:44 -06:00
Gregory Nutt
1694955188 Clone svn:ignore directory atributed to .gitignore files 2013-04-04 14:27:29 -06:00
patacongo
e29d6479c9 Corrections needed after further test of stack-based task arguments 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5771 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 23:37:11 +00:00
patacongo
c496b7aad9 Copy siginfo_t to step before calling a user-space signal handler 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5769 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 20:02:14 +00:00
patacongo
a7b37da2d9 Add a up_stack_frame() interface to allocate a frame of data on a task's stack. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5768 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-21 17:35:08 +00:00
patacongo
c86f502f2e In the kernel build, allocate the stacks for kernel threads from the kernel heap so that they are protected from medddling by the applications 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5766 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-20 20:27:08 +00:00
patacongo
020cc2248e Change prototypes of up_create_stack and up_release_stack to include a task type parameter 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5765 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-20 18:22:21 +00:00
patacongo
990c1febf8 Add support for nested system calls 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5752 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-17 16:13:28 +00:00
patacongo
d455b94545 Fix more compile errors and warnings introduced in recent commits 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5744 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-15 01:32:47 +00:00
patacongo
c85fcaecdb Rename g_heapbase to g_idle_topstack; Fix kernel build heap allocation which cannot use g_heapbase 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5739 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-14 14:42:52 +00:00
patacongo
8159804f9c Fix some ARMv7-M syscall logic 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5736 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-12 21:53:18 +00:00
patacongo
3dc5b1fa9f Create sched_ufree and sched_kfree from sched_free; Use user-accessible heap to allocae stacks 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5725 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-10 15:32:33 +00:00
patacongo
e47c64204c More changes for a kernel-mode allocator (more to be done) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5724 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-09 21:12:20 +00:00
patacongo
edeb45f8c5 More kernel build fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5716 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-07 14:27:47 +00:00
patacongo
bd1488bdab Fix some bad syscall dispatching log. This change is not testable until these is a tested NuttX kernel build. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5713 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-06 19:56:32 +00:00
patacongo
33a78ff078 Fix for compilation issues reported by Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5702 42af7a65-404d-4744-a932-0658087f49c3
 2013-03-04 00:00:19 +00:00
patacongo
9207732f18 Add debug output when memory allocations fail 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5686 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-28 15:31:58 +00:00
patacongo
f84c45c220 Some NuTiny-SDK-NUC120 size reduction; All serial driver vtables should be static const 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5683 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 22:24:49 +00:00
patacongo
f7833e1c8e MIPS stack alignment fix for floating point from Helmut 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5681 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-27 16:31:03 +00:00
patacongo
c254d0bb3e Add an NSH configuration for the NuTiny-SDK-NUC120. Still does not work 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5678 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-26 21:53:12 +00:00
patacongo
fd9eac63a9 Some fixes needed for STM32 build after recent scheduler changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5620 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-07 16:58:43 +00:00
patacongo
bc69dc2c5a Rename _TCB to struct tcb_s 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5610 42af7a65-404d-4744-a932-0658087f49c3
 2013-02-04 18:46:28 +00:00
patacongo
b27ce2030e Misc clean; mark assertions as non-returning; allow toolchain prefix to be overriden from make command line 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5591 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 23:29:34 +00:00
patacongo
cec4563394 Missing calls to class SUSPEND/RESUME methods in all USB drivers 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5590 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-31 19:20:26 +00:00
patacongo
b1aa82fcca Add syslog.h; rename lib_rawprintf() to syslog() 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5578 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 21:55:16 +00:00
patacongo
1b8979d24f Serial driver needed even when no console; Fix user LED settings in all STM32 configurations 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-28 15:03:17 +00:00
patacongo
6cfe0a45e9 Move stream data from TCB to task group structure. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5569 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-26 22:25:21 +00:00
patacongo
43659b5840 Move file data from TCB to task group 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5567 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-26 20:17:29 +00:00
patacongo
71a8d7d104 Fix poll/select issue reported by Qiang 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5559 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-24 19:19:38 +00:00
patacongo
65a1c61e6c Beginning of support for LCD1602 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5545 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-21 22:46:37 +00:00
patacongo
ee2be652aa Implement vfork() for the MIPS32 architecture 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5520 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-15 15:40:18 +00:00
patacongo
74a42b5f39 Configre configs/ubw32/ostest to use kconfig-frontends 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5518 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-14 22:06:19 +00:00
patacongo
1a4baed866 Mostly costmetic updates 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5452 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-23 17:32:41 +00:00
patacongo
cd20adb63d Patches from Petteri Aimonen + stdbool and rand() changes for Freddie Chopin 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5415 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-07 16:00:56 +00:00
patacongo
9b1ea99dec All ZNEO configurations converted to use the mconf/Kconfig tool 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5401 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-29 18:44:02 +00:00
patacongo
f99e55676b Add common Toolchain.defs for AVR/AVR32; Add Toolchain.defs for ARM; Add more toolchain options (from Mike); incdir.sh and .bat now take -s option 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5384 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-23 14:13:57 +00:00
patacongo
04dbba6227 /configs/stm32f4discovery/winbuild and configs/cloudctrl upated to use Mike's Toolchain.defs; Fix error introduced into tools/configure.sh 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5380 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-21 19:54:44 +00:00
patacongo
74949ee01d Big refactoring of toolchain definitions by Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5379 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-21 18:34:10 +00:00
patacongo
00d2b645e6 Missing comma in EVERY DELFILE/DELDIR macro call in every Makefile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5373 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-20 15:47:41 +00:00
patacongo
756e84977b Most of the changes needed to support Windows native clean; distclean is has a problem 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5367 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-17 18:54:53 +00:00
patacongo
7163ac74fa Move some (hopefully) un-necessary quotes in Makefiles for Mike 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5356 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-15 17:43:29 +00:00
patacongo
856f320736 Simple window natives OS test build now works; Probabaly more to do for other configs; clean targets still have problems 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5355 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-14 20:59:36 +00:00
patacongo
0a8e570a3b More native build fixes -- still problems in apps/ directory 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5352 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-14 15:55:07 +00:00
patacongo
fbdc3246fd A few more build fixes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5340 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-12 01:54:54 +00:00
patacongo
bf8f1e986c Correct some issues with last check-in; ez80 still does not build 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5339 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 23:44:31 +00:00
patacongo
fac751de6b Partial change: Removing bash ARCHIVE loop 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5335 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 15:42:12 +00:00
patacongo
31fcfae567 Remove bash fragments that test for board/Makefile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5334 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 14:36:01 +00:00
patacongo
9b822f3086 arch/../src/Makefiles now use only libraries in lib/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5333 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 13:52:31 +00:00
patacongo
51793af904 Change = to += in setting of LDFLAGS in all architecture Makefiles 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5311 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-04 21:04:30 +00:00
patacongo
5acf2fe3e1 Resync new repository with old repo r5166 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5154 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-17 18:35:37 +00:00
patacongo
36df84c843 Email address change in nuttx/ 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5145 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-13 18:32:24 +00:00
patacongo
267eb76ea9 The M3 Wildfire port is code complete and ready for test 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5125 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-10 22:26:37 +00:00
patacongo
4f469e6316 Reconfigured Shenzhou to use JTAG. Misc Kconfig changes 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5118 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-09 15:43:18 +00:00
patacongo
767934d4f5 Shenzhou board is first to use ONLY Kconfig for configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5114 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 13:56:21 +00:00
patacongo
06edc9b16b Kconfig: Standardize board LED and button configurations 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5112 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-08 03:31:46 +00:00
patacongo
0f4f0d72af LPC17xx Kconfig looks good 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5099 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 21:36:03 +00:00
patacongo
bd9b0f2d4f Add Kconfig settings for the LPC17xx 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5094 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 17:20:19 +00:00
patacongo
48362edbb5 Refactor serial configuratin; AVR teensy Kconfig now builds 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5092 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-05 12:45:35 +00:00
patacongo
dbaa35bf9c Kconfig changes + back out part of last check-in: The 2STOP setting must be integer 0/1, not boolean 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5086 42af7a65-404d-4744-a932-0658087f49c3
 2012-09-04 15:28:56 +00:00
patacongo
95ec4c3991 Auto-configuration updates from Richard Cochran 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5032 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-17 14:07:48 +00:00
patacongo
40888af331 Move RAMLOG driver to drivers/syslog; Add ability to output debug information to any character device or file 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4996 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-02 00:42:46 +00:00
patacongo
e6970f04e6 Add support for PIC32MX1/2 ANSEL register; Mirtoo NXFFS configuration now uses the Pinquino toolchain by default: 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4984 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-27 17:25:35 +00:00
patacongo
de34678cb0 Combine cfset[o|i]speed to cfsetspeed; combine cfget[o|i]speed for cfgetspeed 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4975 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-24 22:56:36 +00:00
patacongo
f061660d50 Ooops.. c_speed is now read-only 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4974 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-24 17:16:25 +00:00
patacongo
28bd2e6071 Baud definitions (B9600 for example) are again encoded; Now supports the BOTHER settings which allows specifying the baud via c_ispeed and c_ospeed termios fields 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4970 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-23 15:37:13 +00:00
patacongo
faf4bad3f1 Change all values in all limits.h for all architectures to signed decimal; the hex values were not sign extending appropriate in most uses 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4911 42af7a65-404d-4744-a932-0658087f49c3
 2012-07-05 23:45:57 +00:00
patacongo
4ca2862016 Fix a critical PIC32 GPIO configuration bug 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4867 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-25 15:24:52 +00:00
patacongo
8d06757bc4 Enable LEDs on Mirtoo board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4863 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-22 18:35:25 +00:00
patacongo
c3316872c5 Mirtoo update 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4860 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-21 20:44:55 +00:00
patacongo
22b8a95b2b Minor updates to PIC32 configuration and to documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4858 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-21 00:05:20 +00:00
patacongo
a13efa2e7e More updates for PIC32 MX1/2 device configuration bits 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4857 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-20 22:29:32 +00:00
patacongo
d227c86a14 Updates to support the Mirtoo internal clocking 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4855 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-20 19:29:20 +00:00
patacongo
f17fd97fd2 PIC32MX1/2 pin selection logic; Mirtoo LEDs, SPI2, and UART2 configuration 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4853 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-20 17:37:20 +00:00
patacongo
55f328c91a Add a configuration to support the Mirtoo module 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4852 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-20 00:04:56 +00:00
patacongo
469d018967 Add support for PIC32 MX1 and MX2 families 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4851 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-19 19:09:14 +00:00
patacongo
7ecafdd6e4 Fix a bad interrupt state in the PIC32 IDLE loop when the work queue is enabled 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4805 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-06 01:44:57 +00:00
patacongo
1242e0227e Add an ADC-based touchscreen driver for the PIC32MX7 MMB board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4804 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-05 19:45:01 +00:00
patacongo
ecdb40a0ec The PIC32MX7 MMB's mio832qt2 LCD is functional 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4803 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-04 20:36:18 +00:00
patacongo
3793169301 Add support for the MIO283QT2 LCD 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4802 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-04 18:45:48 +00:00
patacongo
d5261c997a SD card now works on the PIC32MX7 MMB board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4799 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-03 16:09:59 +00:00
patacongo
150b5d3a48 Add SD card support to the PIC32MX7 MMB board; Add regiser level debug instrumentatin for the PIC32 SPI driver 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4797 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-02 17:57:39 +00:00
patacongo
c6788bd806 Fix PHY address search; NFS update 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4796 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-01 23:12:17 +00:00
patacongo
4ee1cd036b Fix device configuration... now Mikroelektronika PIC32MX7 MMB board works. 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4794 42af7a65-404d-4744-a932-0658087f49c3
 2012-06-01 19:07:17 +00:00
patacongo
a74f601c6c Add circular DMA support to STM32 and STM32 serial driver; Add initial configuration for the Mikroelektronika PIC32MX7 MMB board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4640 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-22 19:50:33 +00:00
patacongo
868fc6e118 More Kconfig stuff 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4636 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-19 22:51:42 +00:00
patacongo
5804060da5 More Kconfig stuff 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4628 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-17 22:54:31 +00:00
patacongo
f566645ab9 More Kconfig files 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4624 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-17 13:48:39 +00:00
patacongo
53ab05dce6 Extend the USB device/class interface: Add parameters to pass the EP0 OUT data that should accompany the OUT SETUP request 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4595 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-12 16:30:48 +00:00
patacongo
8948524fd3 Include libgcc.a inside of the group of recursively linked libraries in all Makefiles 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4573 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-08 13:03:26 +00:00
patacongo
3635befa76 Add kconfig documentation 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4567 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 16:45:52 +00:00
patacongo
d79a3b09f4 Adding skeleton Kconfig files (part 1 of 2) 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4564 42af7a65-404d-4744-a932-0658087f49c3
 2012-04-06 15:49:35 +00:00
patacongo
b365ff099e Change STM32 so that stm32_pmstop.c and stm32_pmstandby are built even if CONFIG_PM is not defined 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4502 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-22 14:07:45 +00:00
patacongo
b4852fca75 Move serial header files to include/nuttx/serial 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4500 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-21 19:47:23 +00:00