Gregory Nutt
|
0b7ec97370
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
d9e0116075
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
eb5a2d670c
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
91c9e60e14
|
SAMA5D3 Xplained: Delay loop calibrated
|
2014-04-03 16:38:36 -06:00 |
|
Gregory Nutt
|
2efc4d6396
|
SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided.
|
2014-04-03 16:08:18 -06:00 |
|
Gregory Nutt
|
89a8bd848c
|
Updated NOR boot logic from David Sidrane
|
2014-04-03 15:40:51 -06:00 |
|
Gregory Nutt
|
52f114a10e
|
SAMA5 NOR boot: Use a static memory variable to determine if/when we boot to NOR FLASH
|
2014-04-03 15:34:41 -06:00 |
|
Gregory Nutt
|
5fef770362
|
SAMA5: Cosmetic updates to comments and README files
|
2014-04-03 15:30:00 -06:00 |
|
Gregory Nutt
|
c9fc03d52f
|
If LOWVECTORS is selected, then we need to clear the VBAR register. A bootloader may have left the VBAR in an bad state
|
2014-04-03 13:09:30 -06:00 |
|
Gregory Nutt
|
6201df6463
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
0d66ba9c00
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
b3daf84b12
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
cbdc9155ab
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
3d8cbb415c
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
85b0a1a544
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
fa5988bf7b
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
4410deb8b6
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
d14940a375
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
Gregory Nutt
|
392031ff7c
|
SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards
|
2014-03-30 07:26:38 -06:00 |
|
Gregory Nutt
|
aac2a6759d
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
8bc70e38ab
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
09fb2a1893
|
Add basic board support framework for the Atmel SAMA5D3 Xplained board (not finished)
|
2014-03-28 15:20:26 -06:00 |
|
Gregory Nutt
|
d204310623
|
configs/sama5d3x-ek: Fix some typos
|
2014-03-28 15:18:49 -06:00 |
|
Gregory Nutt
|
f12e37cae4
|
Documentatin updated; fix errors in some comments
|
2014-03-28 09:52:07 -06:00 |
|
Gregory Nutt
|
1e7a14ed2e
|
SAMA5D3x-EK: Fix lots of typos in board name
|
2014-03-28 09:11:19 -06:00 |
|
Gregory Nutt
|
a53493eacc
|
SAM4E: Clarify LCD data width
|
2014-03-28 08:29:04 -06:00 |
|
Gregory Nutt
|
d8b2011218
|
SAM4E-EK: Remove bogus LCD driver; replace with information that might be useful to someone who wants to develop an LCD driver for the SAM4E-EK
|
2014-03-27 10:38:21 -06:00 |
|
Gregory Nutt
|
942c6e0e44
|
SAM4E-EK: CMCC is enabled in all configurations and delay loop has been calibrated
|
2014-03-26 17:07:08 -06:00 |
|
Gregory Nutt
|
63af8d88fb
|
SAM4E-EK: All configurations converted to run with 120MHz CPU clock
|
2014-03-26 14:03:33 -06:00 |
|
Gregory Nutt
|
3f4593dda8
|
SAM4E USP: Re-vamp read request queue handling. Add logic to handle RX overrun errors
|
2014-03-26 11:38:47 -06:00 |
|
Gregory Nutt
|
8fb610a537
|
SAMA5D3: Fix some typos in last blind changes backported from the SAM4e. And verified
|
2014-03-25 16:11:33 -06:00 |
|
Gregory Nutt
|
e68f6049c5
|
backport a serial console fix from the sam4e to the sama5d3
|
2014-03-25 14:34:07 -06:00 |
|
Gregory Nutt
|
316bc83220
|
For all configurations that have the default pthread stacksize set to some other value than 2048 AND which have the USB MSC device class enabled, add a definition of CONFIG_USBMSC_SCSI_STACKSIZE so that the size of the stack used by USB MSC SCSI worker thread does not increase
|
2014-03-25 14:21:33 -06:00 |
|
Gregory Nutt
|
3c3506bd13
|
apps/system/usbmsc: Back out kludge that is no longer needed with the recent fix to the USB MSC class
|
2014-03-25 12:42:01 -06:00 |
|
Gregory Nutt
|
03bd2a6ad9
|
Add missing HSCMI configuration options; Make HSMCI configuration naming more compatible; Fix HSCMI clocking to use the CLKODD bit
|
2014-03-24 14:25:40 -06:00 |
|
Gregory Nutt
|
9a484b4c6e
|
Cosmetic updates to comments and README files
|
2014-03-24 10:23:56 -06:00 |
|
Gregory Nutt
|
70c8dcaa34
|
SAM3/4: Rename CONFIG_GPIO*_IRQ to CONFIG_SAM34_GPIO*_IRQ in all board-related files
|
2014-03-23 15:48:10 -06:00 |
|
Gregory Nutt
|
9ff81f3b1f
|
SAM4E-EK: Fixes for HSMCI compilation
|
2014-03-23 15:46:55 -06:00 |
|
Gregory Nutt
|
7cebadd05f
|
Fix condition in conditional compilation associated with USB monitor support
|
2014-03-23 13:33:30 -06:00 |
|
Gregory Nutt
|
b583c95de4
|
Cosmet update to debug messages and to comments
|
2014-03-23 13:32:39 -06:00 |
|
Gregory Nutt
|
4670aab945
|
Fix bad configuration change of last commit
|
2014-03-23 10:38:31 -06:00 |
|
Gregory Nutt
|
9d9631243a
|
SAM4E-EK: Enable interrupt stack in all configurations
|
2014-03-23 10:12:57 -06:00 |
|
Gregory Nutt
|
293b5d7723
|
SAM4E-EK UDP: prevent some bad recursive behavior
|
2014-03-22 17:30:17 -06:00 |
|
Gregory Nutt
|
f066b87828
|
SAM4E-EK: Add an NSH configuration that uses a USB CDC/ACM console
|
2014-03-22 09:27:43 -06:00 |
|
Gregory Nutt
|
9f2ee0966a
|
SAM4E-EK NSH: Increase the number of preallocated WDOGS to 32 to avoid timeout failures
|
2014-03-21 11:22:50 -06:00 |
|
Gregory Nutt
|
06e60bab2b
|
SAM4E UDP: Cosmetic updates to tracing and README
|
2014-03-21 10:45:12 -06:00 |
|
Gregory Nutt
|
349f7155c7
|
Cosmetic update to README
|
2014-03-20 15:21:26 -06:00 |
|
Gregory Nutt
|
de0c5d50da
|
Typo fixed
|
2014-03-20 10:56:43 -06:00 |
|
Gregory Nutt
|
57516a8ede
|
LPC17 USB Host: Minor clean-up after performing some regressin testing
|
2014-03-19 08:33:15 -06:00 |
|
Gregory Nutt
|
47ffb340e9
|
SAM4E UDP: Add support for USB monitor
|
2014-03-18 16:33:36 -06:00 |
|
Gregory Nutt
|
a5bdccebe3
|
TM4C123G Launchpad: Corrected processor configuration from Daniel Pereira de Carvalho
|
2014-03-18 11:21:31 -06:00 |
|
Gregory Nutt
|
5f8304415d
|
SAM4E: Fix a few more UDP bring-up bugs. Still not working
|
2014-03-18 11:00:20 -06:00 |
|
Gregory Nutt
|
fe9023752a
|
SAM4E: Revise board-specific USB MSC support
|
2014-03-18 09:31:02 -06:00 |
|
Gregory Nutt
|
f673057c2f
|
Removed to unnecessary, cloned USB-related logic
|
2014-03-17 14:13:09 -06:00 |
|
Gregory Nutt
|
e869de4272
|
SAM4E: Add USB full speed device (UDP) driver
|
2014-03-17 12:37:55 -06:00 |
|
Gregory Nutt
|
1cde363251
|
SAM3/4: Fleshing out environment to support USB device (UDP)
|
2014-03-16 14:11:22 -06:00 |
|
Gregory Nutt
|
4d34848389
|
SAM4E-EK: NSH configuration now has DMA-based SPI and AT25 Serial FLASH suported enabled by default
|
2014-03-14 12:35:17 -06:00 |
|
Gregory Nutt
|
dba6cca886
|
SAM3/4: Integrate the SPI DMA interface with the existing code. Does not yet work.
|
2014-03-13 15:54:09 -06:00 |
|
Gregory Nutt
|
42e06fb503
|
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
|
2014-03-13 14:07:35 -06:00 |
|
Gregory Nutt
|
7e16cee6b5
|
Backport SPI driver enhancements from SAMA5 to SAM3/4
|
2014-03-13 10:34:35 -06:00 |
|
Gregory Nutt
|
0bd5f23a30
|
SAM4E: Fix EMAC pin configuration. Driver is basically functionaly now. SAM4E-EK NSH configuration now has networking enabled by default
|
2014-03-13 09:03:03 -06:00 |
|
Gregory Nutt
|
1a2845a4ef
|
SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver
|
2014-03-12 15:03:59 -06:00 |
|
Gregory Nutt
|
ce82132ef1
|
SAM4E: Various bring-up fixes. NSH now works
|
2014-03-12 10:59:19 -06:00 |
|
Gregory Nutt
|
875b985781
|
SAM4E-EK: Purely cosmetic updates
|
2014-03-11 10:44:00 -06:00 |
|
Gregory Nutt
|
da8a0e8062
|
Refresh spark configurations
|
2014-03-11 10:43:14 -06:00 |
|
Gregory Nutt
|
99d2f3a993
|
SAM4E-EK: Add basic board support
|
2014-03-10 15:18:46 -06:00 |
|
Gregory Nutt
|
6700b5318c
|
TM4C: A few more changes to get a clean compilation
|
2014-03-10 11:54:20 -06:00 |
|
Gregory Nutt
|
75bda40eb6
|
Add basic board support for the TM4C123G Launchpad
|
2014-03-10 11:25:06 -06:00 |
|
Gregory Nutt
|
f2fd4df587
|
Refresh all LM3/4/Tiva configurations
|
2014-03-09 07:59:09 -06:00 |
|
Gregory Nutt
|
cd58da526b
|
Refresh LM3S defconfig files
|
2014-03-08 15:55:27 -06:00 |
|
Gregory Nutt
|
41a5b67887
|
functions and definitions renamed from lm_ to tiva_
|
2014-03-08 15:50:26 -06:00 |
|
Gregory Nutt
|
7c55ba4115
|
All files and functions beginning with lm_ changed to tiva_
|
2014-03-08 13:29:09 -06:00 |
|
Gregory Nutt
|
32f8f33653
|
The old lm/ directories were enamed tiva/ to better support new products coming down the pipe from TI
|
2014-03-08 12:31:06 -06:00 |
|
Gregory Nutt
|
441c311a3c
|
LPC2378: SPI driver from Lizhuoyi
|
2014-03-08 11:37:50 -06:00 |
|
Gregory Nutt
|
497939da0f
|
configs/olimex-lpc2378/src: Files renamed to correspond with current thinking about naming; defconfigs refreshed
|
2014-03-08 10:54:05 -06:00 |
|
Gregory Nutt
|
7e257ee7f4
|
configs/qemu-i486 update naming standards to conform to current thinking; refresh defconfig files
|
2014-03-08 09:21:08 -06:00 |
|
Gregory Nutt
|
6b068754a0
|
configs/pic32-starterkit, pic32mx7mmb, stm3210e-eval, stm3220g-eval, and stm3240g-eval: Refresh all configurations with the latest Kconfig files
|
2014-03-07 11:47:07 -06:00 |
|
Gregory Nutt
|
eb132f256c
|
Refresh configuration files
|
2014-03-06 17:16:46 -06:00 |
|
Gregory Nutt
|
bd8a0aec21
|
Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes
|
2014-03-06 16:02:18 -06:00 |
|
Gregory Nutt
|
1cd7c4f626
|
Minor cleanup of some new configurations; warning removal with GCC 4.8.2
|
2014-03-06 13:31:13 -06:00 |
|
Gregory Nutt
|
4cbdbc875e
|
Support for the older, manual configurations has been completely removed from the NuttX build system
|
2014-03-06 13:00:50 -06:00 |
|
Gregory Nutt
|
596bdc73df
|
Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file
|
2014-03-06 12:23:26 -06:00 |
|
Gregory Nutt
|
e871f36d13
|
configs/rgmp/x86/cxxtest: Configuration converted to use the kconfig-frontends tools. This completes the conversion of all configurations to the newer format
|
2014-03-06 12:02:43 -06:00 |
|
Gregory Nutt
|
ecbd6cde75
|
configs/rgmp/x86/helloxx: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:57:55 -06:00 |
|
Gregory Nutt
|
cab35c579a
|
configs/rgmp/x86/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:53:26 -06:00 |
|
Gregory Nutt
|
4bbbe80a31
|
configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:47:16 -06:00 |
|
Gregory Nutt
|
2993bd108d
|
configs/rgmp/arm/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:28:29 -06:00 |
|
Gregory Nutt
|
29a4ca8f08
|
configs/rgmp/arm/default: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 11:19:05 -06:00 |
|
Gregory Nutt
|
60f5acf8da
|
configs/pjrc-8051: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 10:27:52 -06:00 |
|
Gregory Nutt
|
ca916b1060
|
onfigs/mx1ads/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:48:25 -06:00 |
|
Gregory Nutt
|
d5fbc4eeac
|
configs/us7032evb1/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:21:10 -06:00 |
|
Gregory Nutt
|
17a96f6e1e
|
configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 09:17:11 -06:00 |
|
Gregory Nutt
|
86d7618733
|
configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-06 08:28:49 -06:00 |
|
Gregory Nutt
|
79f8b6928a
|
configs/ne64badge/ostest and demo9s12nec64/ostest: Configurations onverted to use the kconfig-frontends tools
|
2014-03-05 17:27:58 -06:00 |
|
Gregory Nutt
|
72164cb176
|
Use common naming for rest of the toolchains too
|
2014-03-05 16:29:58 -06:00 |
|
Gregory Nutt
|
79dc48a71a
|
Use common naming for all buildroot toolchains
|
2014-03-05 15:37:07 -06:00 |
|
Gregory Nutt
|
9e12be2129
|
configs/qemu-i486/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 14:42:54 -06:00 |
|
Gregory Nutt
|
ba49e3f29a
|
configs/qemu-i486/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 14:36:35 -06:00 |
|
Gregory Nutt
|
5c1d6d7580
|
configs/ea3131/pgnsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 14:26:30 -06:00 |
|
Gregory Nutt
|
972eeae12d
|
Add configuration ettings for the on-demand paging option
|
2014-03-05 14:25:49 -06:00 |
|
Gregory Nutt
|
6f3f870d31
|
configs/ntosd-dm320/uip: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:57:49 -06:00 |
|
Gregory Nutt
|
5d639014d7
|
configs/ntosd-dm320/udp: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:48:58 -06:00 |
|
Gregory Nutt
|
fe913b3140
|
configs/ntosd-dm320/thttpd: Configuration converted to use the kconfig-frontends tool
|
2014-03-05 12:34:59 -06:00 |
|
Gregory Nutt
|
ae9ea64ab4
|
configs/ntosd-dm320/poll: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:29:24 -06:00 |
|
Gregory Nutt
|
57f8ddb453
|
configs/ntosd-dm320/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:23:39 -06:00 |
|
Gregory Nutt
|
a2a3f80120
|
configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 12:16:02 -06:00 |
|
Gregory Nutt
|
5f7987a9b7
|
configs/avr32dev1/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 11:34:25 -06:00 |
|
Gregory Nutt
|
22fbd809e4
|
configs/avr32dev1/ostest: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 11:26:26 -06:00 |
|
Gregory Nutt
|
8e06aa47d6
|
Create AVR32 Kconfig files; reshuffled lots of configuration names
|
2014-03-05 11:25:36 -06:00 |
|
Gregory Nutt
|
87032960cb
|
configs/teensy/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 09:40:58 -06:00 |
|
Gregory Nutt
|
d108ba6a56
|
configs/teensy/hello: Configuration converted to use the kconfig-frontends tool
|
2014-03-05 09:35:35 -06:00 |
|
Gregory Nutt
|
82e97eaa8f
|
configs/micropendous3/hello: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 09:28:00 -06:00 |
|
Gregory Nutt
|
79f0509ce5
|
configs/amber/hello: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 09:22:50 -06:00 |
|
Gregory Nutt
|
063119dd72
|
configs/olimex-strp711/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 09:06:13 -06:00 |
|
Gregory Nutt
|
f68d1da594
|
configs/mcu123-lpc214x/composite: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 08:56:21 -06:00 |
|
Gregory Nutt
|
d0bc71f9dc
|
configs/compal_e99/nsh_highram: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 08:43:50 -06:00 |
|
Gregory Nutt
|
c6b9cef746
|
configs/compal_e99/nsh_compalram: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 08:23:20 -06:00 |
|
Gregory Nutt
|
c9b37f85dd
|
configs/c5471evm/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-05 08:00:35 -06:00 |
|
Gregory Nutt
|
17252933da
|
configs/olimex-lpc1766stk/slip-httpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 17:30:37 -06:00 |
|
Gregory Nutt
|
04ee068905
|
configs/ez80f910200zco/poll: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 17:14:26 -06:00 |
|
Gregory Nutt
|
e343bdf0f4
|
configs/ez80f910200zco/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 17:09:15 -06:00 |
|
Gregory Nutt
|
4f3b8d7ec0
|
configs/sim/nx11: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 15:56:13 -06:00 |
|
Gregory Nutt
|
a32458a237
|
configs/sim/pashello: Configuration converted to use the kconfig-frontends tool
|
2014-03-04 15:14:11 -06:00 |
|
Gregory Nutt
|
60978fd4c5
|
configs/sim/touchscreen: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 15:08:30 -06:00 |
|
Gregory Nutt
|
31ed7060d3
|
configs/eagle100/nxflat: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 14:21:46 -06:00 |
|
Gregory Nutt
|
69142c44c3
|
configs/c5471evm/httpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 14:04:50 -06:00 |
|
Gregory Nutt
|
41007dcd00
|
configs/ez80f910200zco/httpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 13:54:29 -06:00 |
|
Gregory Nutt
|
d4872db164
|
configs/eagle100/httpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 13:53:58 -06:00 |
|
Gregory Nutt
|
7ada82ec72
|
configs/eagle100/thttpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 13:29:27 -06:00 |
|
Gregory Nutt
|
3ed9346bd4
|
configs/lpcxpresso-lpc1768/thttpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 13:16:06 -06:00 |
|
Gregory Nutt
|
c4433bf09d
|
configs/olimex-lpc1766stk/thttpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 13:08:11 -06:00 |
|
Gregory Nutt
|
b90b5295f1
|
configs/mcu123-lpc214x/usbserial: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 12:18:24 -06:00 |
|
Gregory Nutt
|
663e2760af
|
configs/hymini-stm32v/usbserial: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 12:08:36 -06:00 |
|
Gregory Nutt
|
555b21ead6
|
configs/hymini-stm32v/usbserial: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 11:52:51 -06:00 |
|
Gregory Nutt
|
b94573e9b2
|
configs/stm3220g-eval/telnetd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 11:19:46 -06:00 |
|
Gregory Nutt
|
6df2df573e
|
configs/stm3240g-eval/telnetd: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 11:10:31 -06:00 |
|
Gregory Nutt
|
627fb175f5
|
configs/stm3210e-eval/nxconsole: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 10:48:09 -06:00 |
|
Gregory Nutt
|
4e3dc0ccd6
|
configs/stm3240g-eval/nxconsole: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 10:33:06 -06:00 |
|
Gregory Nutt
|
31cc75b181
|
configs/stm3210e-eval/pm: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 09:55:52 -06:00 |
|
Gregory Nutt
|
18f74bade9
|
configs/stm32f4discovery/pm: Configuration converted to use the kconfig-frontends tools
|
2014-03-04 08:58:01 -06:00 |
|
Gregory Nutt
|
1c76e28794
|
Add missing DHCPD configuration settings
|
2014-03-03 18:12:45 -06:00 |
|
Gregory Nutt
|
218776ee90
|
configs/teensy/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:54:38 -06:00 |
|
Gregory Nutt
|
c79bc5a19d
|
configs/mcu123-lpc214x/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:40:18 -06:00 |
|
Gregory Nutt
|
e37d342bd3
|
configs/ea3131/usbmsc: Configuration removed. It could not possible useful because there is no MCI driver for the EA3131
|
2014-03-03 15:13:35 -06:00 |
|
Gregory Nutt
|
8c7f7cac89
|
configs/hymini-stm32v/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 15:04:15 -06:00 |
|
Gregory Nutt
|
6bbb5d281b
|
configs/stm3210e-eval/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 14:55:42 -06:00 |
|
Gregory Nutt
|
47deb597d9
|
configs/lpcxpresso-lpc1768/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 14:48:20 -06:00 |
|
Gregory Nutt
|
a9b39d7a0e
|
configs/nucleus2g/usbmsc: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 14:42:04 -06:00 |
|
Gregory Nutt
|
3963b5348d
|
configs/olimex-lpc1766stk/usbmsc: Configuration converted to use the kconfig-frontends tool
|
2014-03-03 14:27:35 -06:00 |
|
Gregory Nutt
|
adc2a714a5
|
configs/lpcxpresso-lpc1768/dhcpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 13:36:23 -06:00 |
|
Gregory Nutt
|
08bf8b68f4
|
configs/stm3240g-eval/dhcpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 13:29:27 -06:00 |
|
Gregory Nutt
|
932a47c903
|
configs/stm3220g-eval/dhcpd: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 13:21:55 -06:00 |
|
Gregory Nutt
|
ce4ee2ed04
|
configs/ez80f910200zco/dhcpd converted to use the kconfig-frontends tools
|
2014-03-03 13:10:11 -06:00 |
|
Gregory Nutt
|
cdd6883fe8
|
configs/sim/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 12:44:37 -06:00 |
|
Gregory Nutt
|
c60d0ff7de
|
configs/stm3240g-eval/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 12:37:32 -06:00 |
|
Gregory Nutt
|
05d676ffc6
|
Make network buffering sizes consistent in all configurations
|
2014-03-03 12:24:43 -06:00 |
|
Gregory Nutt
|
e14fed0922
|
configs/stm3220g-eval/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 11:58:35 -06:00 |
|
Gregory Nutt
|
9e9889aece
|
Fix other ez80 configurations for changes made to configuratino variables
|
2014-03-03 11:45:04 -06:00 |
|
Gregory Nutt
|
2c1b3188e7
|
onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools
|
2014-03-03 11:40:29 -06:00 |
|
Gregory Nutt
|
ecf2f99fa0
|
configs/eagle100/nettest: Converted to use kconfig-frontends tools
|
2014-03-03 11:22:36 -06:00 |
|
Gregory Nutt
|
4ac4814fb4
|
configs/olimex-strp711/nettest: Converted to use kconfig-frontends tools
|
2014-03-03 10:52:02 -06:00 |
|
Gregory Nutt
|
f5888496fb
|
configs/c5471evm/nettest converted use kconfig-frontends. C5471 build updated
|
2014-03-03 10:05:06 -06:00 |
|
Gregory Nutt
|
ea1cf69e9c
|
configs/sim/nx: Configuration converted to use the kconfig-frontends tools
|
2014-03-02 13:02:01 -06:00 |
|
Gregory Nutt
|
522a44ab62
|
configs/lm3s8962-ek/nx: Configuration converted to use the kconfig-frontends tools
|
2014-03-02 12:56:04 -06:00 |
|
Gregory Nutt
|
4e39cf40c0
|
configs/lpcxpresso-lpc1768/nx: Configuration converted to use the kconfig-frontends tools
|
2014-03-02 12:42:23 -06:00 |
|
Gregory Nutt
|
9fd85aec9e
|
configs/olimex-lpc1766stk/nx converted to use the kconfig-frontends
|
2014-03-02 12:26:52 -06:00 |
|
Gregory Nutt
|
6b1aebdcae
|
arch/arm/src/lpc2378/Kconfig: Create Kconfig for the platform; Adjust configuration names for compatibility, configs/olimex-lpc2378/nsh: Convert to use the kconfig-frontends tools
|
2014-03-02 11:08:23 -06:00 |
|
Gregory Nutt
|
1aba98dcaa
|
configs/mirtoo/nxffs converted to use the kconfig-frontends
|
2014-03-02 09:05:07 -06:00 |
|
Gregory Nutt
|
b69d740b2e
|
configs/stm3210e-eval/nx converted to use the kconfig-frontends tools
|
2014-03-02 08:11:07 -06:00 |
|
Gregory Nutt
|
63fe34f0f9
|
configs/stm3210e-eval/nx converted to use the kconfig-frontends tools
|
2014-03-02 08:10:33 -06:00 |
|
Gregory Nutt
|
a8f602b897
|
stm3210e-eval: Remove some old configurations that are not worth converting to kconfig-frontends
|
2014-03-02 07:48:25 -06:00 |
|
Gregory Nutt
|
8462bcc072
|
Removed unused configuratin variable: CONFIG_PGTABLE_VADDR
|
2014-03-01 16:21:28 -06:00 |
|
Gregory Nutt
|
bb79092121
|
configs/configs/ea3152/ostest converted to use the kconfig-frontends tools
|
2014-03-01 16:20:14 -06:00 |
|
Gregory Nutt
|
136488624a
|
configs/lpc4330-xplorer/nsh converted to use the kconfig-frontends tools
|
2014-03-01 16:01:13 -06:00 |
|
Gregory Nutt
|
e0a9decf48
|
Fix a typo in the STM32F4 Discovery board Makefile. From Max Kriegleder
|
2014-03-01 14:16:34 -06:00 |
|
Gregory Nutt
|
e4c56e27ed
|
configs/eagle100/nsh converted to use the kconfig-frontends tools
|
2014-03-01 14:12:05 -06:00 |
|
Gregory Nutt
|
9f366d5e8d
|
configs/lm3s8962-ek/nsh converted to use the kconfig-frontends tools
|
2014-03-01 13:29:23 -06:00 |
|
Gregory Nutt
|
43e3117bc3
|
configs/lm3s6432-s2e/nsh2 converted to use the kconfig-frontends tools
|
2014-03-01 13:13:21 -06:00 |
|
Gregory Nutt
|
18fefd9fac
|
Oops... bad check-in for last configs/ubw32/nsh change
|
2014-03-01 12:43:09 -06:00 |
|
Gregory Nutt
|
544e7e5508
|
configs/sim/nsh2 converted to use the kconfig-frontends tools
|
2014-03-01 12:32:03 -06:00 |
|
Gregory Nutt
|
98462d7c40
|
configs/ubw32/nsh converted to use the kconfig-frontends tools
|
2014-03-01 12:12:07 -06:00 |
|
Gregory Nutt
|
317586c657
|
configs/pic32mx7mmb/nsh converted to use the kconfig-frontends tools
|
2014-03-01 12:00:56 -06:00 |
|
Gregory Nutt
|
b7d715f2d9
|
configs/pic32-starterkit/nsh2 converted to use the kconfig-frontends tools
|
2014-03-01 11:27:21 -06:00 |
|
Gregory Nutt
|
03042fe99a
|
configs/pic32-starterkit/nsh converted to use the kconfig-frontends tools
|
2014-03-01 11:10:30 -06:00 |
|
Gregory Nutt
|
eea4819a95
|
configs/mirtoo/nsh converted to use the kconfig-frontends tools
|
2014-03-01 10:49:19 -06:00 |
|
Gregory Nutt
|
8dabda56a6
|
configs/vsn/nsh converted to use the kconfig-frontends tools
|
2014-03-01 10:10:55 -06:00 |
|
Gregory Nutt
|
889a6c138e
|
configs/nucleus2g/nsh converted to use the kconfig-frontends tools
|
2014-03-01 09:55:39 -06:00 |
|
Gregory Nutt
|
12adde1e80
|
configs/lpcxpresso-lpc1768/nsh converted to use the kconfig-frontends tools
|
2014-03-01 09:41:42 -06:00 |
|
Gregory Nutt
|
fa1c13925a
|
configs/lincoln60/nsh converted to use the kconfig-frontends tools
|
2014-03-01 09:23:51 -06:00 |
|
Gregory Nutt
|
56eeb9d887
|
configs/stm3210e-eval/nshi2 converted to use the kconfig-frontends tools
|
2014-03-01 08:40:56 -06:00 |
|
Gregory Nutt
|
ecd84b584f
|
configs/stm32i10e-eval/nsh converted to use the kconfig-frontends tools
|
2014-03-01 08:18:22 -06:00 |
|
Gregory Nutt
|
35992ecb37
|
configs/stm3220g-eval/nsh2 converted to use the kconfig-frontends tools
|
2014-03-01 08:03:45 -06:00 |
|
Gregory Nutt
|
7d05ba1f33
|
configs/stm3240g-eval/nsh2 converted to use the kconfig-frontends tools
|
2014-03-01 07:44:55 -06:00 |
|
Gregory Nutt
|
cbcabe3314
|
Removed almost all ostest configurations
|
2014-02-28 19:19:11 -06:00 |
|
Gregory Nutt
|
717a2bc703
|
Remove some OS test configurations. These don't have much value after the initial bring-up (and are certainly not worth converting to kconfig-frontends tools).
|
2014-02-28 16:34:02 -06:00 |
|
Gregory Nutt
|
b634eea4b9
|
configs/stm3240g-eval/nsh: Configuration converted to use the kconfig-frontends tools
|
2014-02-28 16:28:28 -06:00 |
|
Gregory Nutt
|
025233d97e
|
Set CONFIG_DEFAULT_SMALL=y in the defconfig for all smaller MCUs so that if they are reconfigured, they will pick up the most conservative options for all new settings
|
2014-02-28 14:32:44 -06:00 |
|
Gregory Nutt
|
c8bcf4025a
|
Remove Ken's personal directory as the default path to the CodeSourcery toolchain
|
2014-02-28 10:01:01 -06:00 |
|
Gregory Nutt
|
0a61c545e0
|
Refresh the STM32F4Discover/cxxtext configuration
|
2014-02-28 10:00:25 -06:00 |
|
Gregory Nutt
|
47ca6ef4d4
|
configs/*/defconfig: If CONFIG_NSH_LIBRARY is set, make sure that CONFIG_NSH_READLINE is also set or the configuration will use the CLE the next time it is reconfigured
|
2014-02-28 07:45:51 -06:00 |
|
Gregory Nutt
|
07a0cc4233
|
Refresh a Viewtool STM32F107 configuration
|
2014-02-27 17:24:48 -06:00 |
|
Gregory Nutt
|
f78cc7d88d
|
networking: Fix one place where the reference count was not being zeroed. This is really a cosmetic fix UNLESS CONFIG_DEBUG_NET is enabled, then it causes assertions
|
2014-02-25 16:41:11 -06:00 |
|
Gregory Nutt
|
d34b1b620b
|
SAM3/4: Fix some build errors that crept in with the SAM4E support
|
2014-02-25 12:41:38 -06:00 |
|
Gregory Nutt
|
3b07bc6716
|
SAM4E: Update SAM3/4 TC and DMAC register definition header files
|
2014-02-25 10:56:23 -06:00 |
|
Gregory Nutt
|
59769d44f1
|
Add logic to meaure and calculate the CPU load percentage. From David Alessio
|
2014-02-22 15:20:12 -06:00 |
|
Gregory Nutt
|
2cc96f9be1
|
SAM4E: USART/USART header files and drivers updated to support the SAM4E
|
2014-02-22 13:46:23 -06:00 |
|
Gregory Nutt
|
bcaab16d1f
|
Comment out all CONFIG_APPS_DIR settings in all defconfig files. We con't know where the apps/ dir will be be until install time
|
2014-02-21 15:35:53 -06:00 |
|
Gregory Nutt
|
8bcf00159d
|
STM3220G-EVAL: NSH configuration changed to use kconfig-frontends tools by Alan Carvalho de Assis
|
2014-02-21 15:06:36 -06:00 |
|
Gregory Nutt
|
4b824e8d5f
|
SAM4E: Add support for PIO and peripheral clocks
|
2014-02-21 12:34:04 -06:00 |
|
Gregory Nutt
|
79c7b66ed3
|
Fix some errors that crept into the conversion of an Olimex-LPC1766STK configuration
|
2014-02-21 11:30:12 -06:00 |
|
Gregory Nutt
|
0a6942e068
|
SAM4E: Add vector definition header files
|
2014-02-21 08:46:16 -06:00 |
|
Gregory Nutt
|
792ef5692d
|
Olimex LPC1766STK: FTPC configure changed to use the kconfig-fronteds tools by Alan Carvalho de Assis
|
2014-02-20 15:34:59 -06:00 |
|
Gregory Nutt
|
33508df77f
|
SAMD20: Some progress debugging SPI. Currently hangs
|
2014-02-20 15:20:42 -06:00 |
|
Gregory Nutt
|
8f469d70ed
|
SAMD20: Changes for clean build of SPI driver and SAMD20 Xplained Pro board with the I/O1 module installed
|
2014-02-20 11:27:59 -06:00 |
|
Gregory Nutt
|
8bbf4f3ec8
|
SAMD20: SPI driver is code-complete, but untested
|
2014-02-20 09:59:54 -06:00 |
|
Gregory Nutt
|
cc14f9ae06
|
Spark configuration updated from David Sidrane
|
2014-02-19 18:57:21 -06:00 |
|
Gregory Nutt
|
ff899bf0e3
|
SAMD20: Add a framework for an SPI driver
|
2014-02-19 16:52:12 -06:00 |
|
Gregory Nutt
|
916308efc1
|
SAMD20: Move some common SERCOM logic to a separate file where it can be shared
|
2014-02-19 14:47:04 -06:00 |
|
Gregory Nutt
|
6bae54fe35
|
Updated README
|
2014-02-18 17:59:24 -06:00 |
|
Gregory Nutt
|
f68d96a0a5
|
All mbed configurations have been converted to used the kconfig-frontends tools (unverifeid)
|
2014-02-18 16:50:09 -06:00 |
|
Gregory Nutt
|
bbe2b1c533
|
Documentation update
|
2014-02-18 16:19:14 -06:00 |
|
Gregory Nutt
|
b165efca23
|
stm3240g-eval/webserver configuration converted to use the kconfig-frontends tools by Alan Carvalho de Assis
|
2014-02-18 14:36:32 -06:00 |
|
Gregory Nutt
|
416187d752
|
Spark board configurations updated by David Sidrane
|
2014-02-18 13:50:12 -06:00 |
|
Gregory Nutt
|
26777e9145
|
Refresh a defconfig file; updated a README
|
2014-02-18 12:33:00 -06:00 |
|
Gregory Nutt
|
705fc64e95
|
STM32F429 Discovery: All src/ files renamed to make consistent with current naming conventions
|
2014-02-18 12:24:21 -06:00 |
|
Gregory Nutt
|
0b0340598e
|
STM32F429 Discovery: Add support for FPU in OS test
|
2014-02-18 12:04:19 -06:00 |
|
Gregory Nutt
|
3be307bc25
|
sched/task_terminate always return an error because return value was not being set correctory. From Gosha
|
2014-02-18 11:50:32 -06:00 |
|
Gregory Nutt
|
1fcd2bfd10
|
SAMD20: Increase FLASH waitstates to 2
|
2014-02-18 10:37:42 -06:00 |
|
Gregory Nutt
|
7bcf29c72a
|
Mostly cosmetic clean-up of comments
|
2014-02-17 19:22:53 -06:00 |
|
Gregory Nutt
|
246b949610
|
SAMD20: Fix BAUD calculation. Now comes up okay about 20% of the time
|
2014-02-17 18:09:17 -06:00 |
|
Gregory Nutt
|
ed7a324083
|
SAMD20: Fix some confusion what which pins are on which connectors
|
2014-02-17 14:52:14 -06:00 |
|
Gregory Nutt
|
0fd29be0d2
|
SAMD20: Now runs, but no serial output
|
2014-02-17 14:21:22 -06:00 |
|
Gregory Nutt
|
93ca836b85
|
SAMD20: Initial debug changes to get clocking
|
2014-02-17 11:36:52 -06:00 |
|
Gregory Nutt
|
05b5d78ae1
|
SAMD20: Misc changes for a clean build with debug enabled
|
2014-02-17 08:14:19 -06:00 |
|
Gregory Nutt
|
0123c3d13e
|
SAMD20: Move serial console back to SERCOM4
|
2014-02-16 13:34:04 -06:00 |
|
Gregory Nutt
|
05461ef946
|
Update Compal_E88 configurations to use kconfig-frontends. From Alan Carvalho de Assis
|
2014-02-16 12:00:32 -06:00 |
|
Gregory Nutt
|
cb6bf52939
|
SAMD20: Completes low-level USART logic
|
2014-02-16 09:42:29 -06:00 |
|
Gregory Nutt
|
fdccfe930b
|
Remove the unusable m68332evb configuration
|
2014-02-16 07:54:23 -06:00 |
|
Gregory Nutt
|
a998605d9b
|
Remove some garbage files
|
2014-02-15 16:12:43 -06:00 |
|
Gregory Nutt
|
3b0e6526a1
|
SAMD20: A little more USART logic
|
2014-02-15 15:58:48 -06:00 |
|
Gregory Nutt
|
de8f9e979c
|
SAMD20: Beginning of SERCOM UART configuration logic
|
2014-02-15 14:22:56 -06:00 |
|
Gregory Nutt
|
5caa92f463
|
SAMD20: Finishes basic clock configuration logic
|
2014-02-15 10:18:05 -06:00 |
|
Gregory Nutt
|
1ed6677f57
|
SAM D20: More clock configuration logic (still incomplete)
|
2014-02-14 16:46:21 -06:00 |
|
Gregory Nutt
|
293484ffed
|
SAM D20: Put fuse related definition in a separate header file so make license statement cleaner
|
2014-02-14 14:33:34 -06:00 |
|
Gregory Nutt
|
294152fe36
|
SAM D20: A little more clock configuration logic (still incomplete)
|
2014-02-14 13:38:56 -06:00 |
|
Gregory Nutt
|
e98ef18df1
|
SAMD20: Add NVMCTRL register definition header file. Also empty framework for clock configuration
|
2014-02-14 11:03:22 -06:00 |
|
Gregory Nutt
|
08489f9f82
|
SAMD20: Fixes to SRAM size, No. memory regions, and beginning of clocking logic
|
2014-02-13 19:09:58 -06:00 |
|
Gregory Nutt
|
12e96b8f51
|
Add SAMD20 pin configuration definitions
|
2014-02-13 10:56:15 -06:00 |
|
Gregory Nutt
|
1364850552
|
Minimal changes to get a clean compilation of the SAMD20 Xplained configuration. Still a lot of missing logic
|
2014-02-13 09:14:03 -06:00 |
|
Gregory Nutt
|
1bd5ff87c4
|
Fix-up some SAMD20 SERCOM conditionals
|
2014-02-12 18:29:23 -06:00 |
|
Gregory Nutt
|
bd15ec2565
|
Add initial support for the Atmel SAMD20 Xplained Pro board
|
2014-02-12 17:50:58 -06:00 |
|
Gregory Nutt
|
126fcbac7d
|
Add configuration for the SAMD20 Xplained Pro board. Initial check a low-effor, unverified clone of thoe SAM4L Xplained Pro board configuration
|
2014-02-12 17:21:28 -06:00 |
|
Gregory Nutt
|
6b4796fa5a
|
Fix typo cloned to many files: SAM32 vs SAM34
|
2014-02-12 13:00:24 -06:00 |
|
Gregory Nutt
|
91b002a043
|
Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced
|
2014-02-10 18:08:49 -06:00 |
|
Gregory Nutt
|
8ef272911e
|
Update comments in file headers
|
2014-02-10 13:58:08 -06:00 |
|
Gregory Nutt
|
f5d38624e1
|
Updated README file
|
2014-02-10 12:37:40 -06:00 |
|
Gregory Nutt
|
a9b01d5824
|
Support for the MIO283QT9A LCD from Toby Duckworth
|
2014-02-10 12:26:08 -06:00 |
|
Gregory Nutt
|
0070815e87
|
HID mouse can now support some while mice. Problems with Microsoft mice
|
2014-02-10 11:53:37 -06:00 |
|
Gregory Nutt
|
752767cfc1
|
Add a mouse interface that is similar to the touchscreen interface except that it can handle multple buttons and continuously reports positional data so that it can control a cursor
|
2014-02-10 10:14:22 -06:00 |
|
Gregory Nutt
|
0979cdba0e
|
The USB HID mouse driver is now functional. There are some usage issues as described in the top-level TODO list
|
2014-02-09 17:40:23 -06:00 |
|
Gregory Nutt
|
03d5a77615
|
LP1766-STK: Add a configuration to test the USB HID mouse
|
2014-02-09 16:00:57 -06:00 |
|
Gregory Nutt
|
bd16412749
|
Rename Olimex LPC1766-STK files to conform with current naming standards
|
2014-02-09 15:57:02 -06:00 |
|
Gregory Nutt
|
39b98dbf02
|
Rename Olimex LPC1766-STK files to conform with current naming standards
|
2014-02-09 15:56:20 -06:00 |
|
Gregory Nutt
|
0e486c953b
|
Add support for a USB HID mouse. Untested on initial check-in
|
2014-02-09 13:49:31 -06:00 |
|
Gregory Nutt
|
e10ab85d1d
|
More changes to restore the native Windows build
|
2014-02-07 10:14:11 -06:00 |
|
Gregory Nutt
|
0802c792d9
|
Update README with configuration warning
|
2014-02-04 08:42:42 -06:00 |
|
Gregory Nutt
|
76c982583d
|
STM32F4 Discovery: Rename most everything in the board source directory to conform with the ever evolving naming standard
|
2014-02-03 17:19:30 -06:00 |
|
Gregory Nutt
|
eb99d0ea79
|
SAMA5: Oops. Upper case in include does not match lower case of filename.
|
2014-01-30 07:40:10 -06:00 |
|
Gregory Nutt
|
764ba4da70
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
75d21426ff
|
SAMA5: Add a missing endif in a Make.defs that recently added; Several other cosmetic changes
|
2014-01-28 18:59:11 -06:00 |
|
Gregory Nutt
|
72ee80b7cc
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
6188eb7472
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
34b94de8fe
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
9f46dac1e2
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
03d8a4700e
|
A test of kconfig-fontends 3.12.0
|
2014-01-27 14:25:01 -06:00 |
|
Gregory Nutt
|
73d340e0bd
|
Remove EFM32 from build system
|
2014-01-27 10:41:06 -06:00 |
|
Gregory Nutt
|
3b172e5f41
|
Remove support for EFM32. Not ready to be fielded
|
2014-01-27 08:03:39 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
1d5b2d3d3e
|
Rename up_irqbutton() to board_button_irq()
|
2014-01-24 14:04:07 -06:00 |
|
Gregory Nutt
|
1ac245b9c6
|
Rename up_buttons() to board_buttons()
|
2014-01-24 13:59:24 -06:00 |
|
Gregory Nutt
|
b0c0df84f6
|
Rename up_buttoninit to board_button_intialize
|
2014-01-24 13:50:23 -06:00 |
|
Gregory Nutt
|
a5b8755bea
|
Add a patch to work around the bug in the ZDS-II 5.0.1 toolchain
|
2014-01-24 11:58:30 -06:00 |
|
Gregory Nutt
|
8254dea44b
|
ZNEO: Verify that currrent code still works on the ZiLOG board
|
2014-01-24 09:28:52 -06:00 |
|
Gregory Nutt
|
f3f5378acc
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
d2472c7494
|
Should enable external bus after configuring it
|
2014-01-23 17:41:29 -06:00 |
|
Gregory Nutt
|
806b01deef
|
16z: Fix option bits; adjust system clock frequency
|
2014-01-23 12:06:57 -06:00 |
|
Gregory Nutt
|
90f0e4f6dc
|
configs/efm32-dk3650: Support for Energy Micro's development kit for the Leopard Gecko MCU. From Richard Cochran
|
2014-01-23 08:19:34 -06:00 |
|
Gregory Nutt
|
5bbe3a4992
|
configs/viewtool-stm32f107/netnsh: Increase the number of pre-allocated watchdog timers.
|
2014-01-22 17:14:10 -06:00 |
|
Gregory Nutt
|
7f8c50aa51
|
16Z: Some early bring-up fixes
|
2014-01-22 13:46:42 -06:00 |
|
Gregory Nutt
|
564fe7e232
|
configs/16z: Add support for 16z board
|
2014-01-22 11:50:37 -06:00 |
|
Gregory Nutt
|
1bd343b690
|
configs/olimex-stm32-p107: Failes to build is SPI3 for UEXT is not remapped
|
2014-01-21 10:01:51 -06:00 |
|
Gregory Nutt
|
d48b215abf
|
Refresh the Olimex LPC1766STK NSH configuration
|
2014-01-20 17:02:22 -06:00 |
|
Gregory Nutt
|
978daf86e7
|
Update paths to more recent CodeSourcery toolchain
|
2014-01-20 16:59:13 -06:00 |
|
Gregory Nutt
|
d96bfc2d9b
|
X86: Add a configuration option to select the -m32 compiler option when needed
|
2014-01-18 07:38:50 -06:00 |
|
Gregory Nutt
|
94fb69459b
|
Some fixes for typos in recent changes to Kconfig files
|
2014-01-16 16:37:23 -06:00 |
|
Gregory Nutt
|
2382af1e7b
|
You can again specify the default board sub-directory when CONFIG_ARCH_BOARD_CUSTOM is used
|
2014-01-16 10:42:54 -06:00 |
|
Gregory Nutt
|
ebc3a64e35
|
Back out last change to configs/Kconfig. It has some bad side-effects
|
2014-01-16 10:13:20 -06:00 |
|
Gregory Nutt
|
0309c63a23
|
You can now specify or override the default board sub-directory. This is only useful when CONFIG_ARCH_BOARD_CUSTOM is used and the default board sub-directory is not available
|
2014-01-16 09:43:09 -06:00 |
|
Gregory Nutt
|
f077f4b94d
|
Fix for clean px4fmu build
|
2014-01-15 12:50:52 -06:00 |
|
Gregory Nutt
|
32b4a48e7a
|
Misc changes from Richard Cochran
|
2014-01-15 11:05:15 -06:00 |
|
Gregory Nutt
|
803cdfdaf1
|
Changes to get PX4 config to build. Also some warning removal
|
2014-01-14 13:30:22 -06:00 |
|
Gregory Nutt
|
f47b3d04d9
|
One too many PX4 files added
|
2014-01-13 13:56:50 -06:00 |
|
Gregory Nutt
|
7eef2f9410
|
Change how TCP read-ahead is selected to better integrate with TCP write buffering
|
2014-01-13 13:55:51 -06:00 |
|
Gregory Nutt
|
d325809ee3
|
PX4FMU V2 configuration. Still not integrated with the system configuration or build
|
2014-01-13 12:38:01 -06:00 |
|
Gregory Nutt
|
cbb5e4889b
|
Add support for the SO_LINGER socket option. Based on logic from Jason Jiang. Utestested on initial commit
|
2014-01-13 11:58:45 -06:00 |
|
Gregory Nutt
|
fd54cfb213
|
Add support for the STM32VL-Discovery board. Contributed by Alan Carvalho de Assis
|
2014-01-12 17:59:38 -06:00 |
|
Gregory Nutt
|
a5a0656b5b
|
Enable new NSH features by default in the sim/nsh configuration
|
2014-01-11 14:28:10 -06:00 |
|
Gregory Nutt
|
b301471adb
|
A10: Serial clock is OSC24M. From Alan Carvalho de Assis
|
2014-01-10 15:32:42 -06:00 |
|
Gregory Nutt
|
25fd6d1904
|
NSH: Separate command line parsing from command execution. Add support for multiple, semicolone separated commands on each line
|
2014-01-10 15:23:26 -06:00 |
|
Gregory Nutt
|
75390a49a4
|
Vietool STM32F103: LCD updates (still does not work)
|
2014-01-09 13:14:53 -06:00 |
|
Gregory Nutt
|
37f0db6e0c
|
Add support for the XPT2046 touchscreen controller on the Viewtool LCD module
|
2014-01-09 10:57:17 -06:00 |
|
Gregory Nutt
|
49a7faaaaf
|
Add pcDuino patch needed for booting. Update README to explain why
|
2013-12-08 10:56:37 -06:00 |
|
Gregory Nutt
|
458465c8ed
|
Viewtools STM32F103: Add SSD1289 LCD support
|
2014-01-05 14:14:59 -06:00 |
|
Gregory Nutt
|
f9189ae64e
|
Olimex STM32 P107: Add native Windows build support. From Max Holtzberg
|
2014-01-04 09:11:20 -06:00 |
|
Gregory Nutt
|
84596e8473
|
README and other cosmetic updates
|
2014-01-04 08:38:05 -06:00 |
|
Gregory Nutt
|
c49b0b09d9
|
ZNEO: Fix lost serial interrupt bug
|
2014-01-02 10:03:08 -06:00 |
|
Gregory Nutt
|
707922432c
|
Cosmetic: Updates to TODO anre README text
|
2014-01-02 07:53:27 -06:00 |
|
Gregory Nutt
|
5a8517b849
|
Add Z16F NSH configuration
|
2014-01-01 12:40:18 -06:00 |
|
Gregory Nutt
|
1da566f27b
|
Make sure that the Z16F build still builds and runs
|
2014-01-01 10:29:44 -06:00 |
|
Gregory Nutt
|
892784538d
|
sim/mount: Converted to use kconfig-frontends tools
|
2014-01-01 08:52:58 -06:00 |
|
Gregory Nutt
|
a1f8bd0f58
|
The user-mode work queue was not being started
|
2013-12-31 12:48:11 -06:00 |
|
Gregory Nutt
|
bca90d1c28
|
STM3240G-EVAL knxwm: Work around CodeSourcery library bug by switching to buildroot
|
2013-12-31 10:55:46 -06:00 |
|
Gregory Nutt
|
118c4b1d67
|
STM3240G-EVAL: Kernel mode board initialization can't run on the IDLE thread; needs its on initialization kernel thread
|
2013-12-31 07:59:56 -06:00 |
|
Gregory Nutt
|
9e416c2363
|
Looks like an error all all kernel build linker scripts
|
2013-12-30 17:57:20 -06:00 |
|
Gregory Nutt
|
f51f85db37
|
NX: Use a consistent allocator in all configurations
|
2013-12-30 12:42:18 -06:00 |
|
Gregory Nutt
|
4c3b605c19
|
NxWM::CTouchscreen: Add CONFIG_NXWM_TOUCHSCREEN_DEVINIT to suppress attempts to initialize the touchscreen from NxWM in the kernel build
|
2013-12-30 12:39:23 -06:00 |
|
Gregory Nutt
|
cea31ebf68
|
NxWM: Can now disable the NxConsole window. STM3240G-EVAL knxwm: Disabled the NxConsole for now because there are issues with the kernel build.
|
2013-12-30 10:04:34 -06:00 |
|
Gregory Nutt
|
b2a68d8b17
|
Move nuttx/configs/stm3240g-eval/src/up_cxxinitialize.c to apps/platform/stm3240g-eval/
|
2013-12-29 15:02:51 -06:00 |
|
Gregory Nutt
|
804e80d0cb
|
STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration
|
2013-12-29 13:15:08 -06:00 |
|
Gregory Nutt
|
6eb5386b6f
|
NxWidgets server initialization must be performed in the kernel when NxWdigets is built in kernel mode
|
2013-12-29 09:46:57 -06:00 |
|
Gregory Nutt
|
79d1ad4bc2
|
Fix cloned typo in user space definition
|
2013-12-27 10:31:37 -06:00 |
|
Gregory Nutt
|
c8d9de660c
|
default buildroot path is build_arm, not build_arm_nofpu
|
2013-12-26 10:01:14 -06:00 |
|
Gregory Nutt
|
73aa375b87
|
Add GCc 4.8.2 support for buildroot
|
2013-12-26 13:24:06 -06:00 |
|
Gregory Nutt
|
bee251006b
|
STM32F107 OTG FS clock presecaler cannot be configurated after the USB clock is enabled
|
2013-12-26 10:45:21 -06:00 |
|
Gregory Nutt
|
4922f71703
|
Add support for STM32F107 OTG FS (doesn't work) and update USB support for Viewtools STM32F107~
|
2013-12-26 09:22:37 -06:00 |
|
Gregory Nutt
|
e963a4d862
|
F103VC, F105, and F107: Fix configuration and building of USB. configs/viewtools-stm32f107: Fix build for F103 and F107: F103 has USB device; F107 has OTGFS
|
2013-12-25 18:34:15 -06:00 |
|
Gregory Nutt
|
091e5fdf66
|
Viewtools netnsh configuration supports Telnet console; A framework for SD card and USB device support
|
2013-12-25 14:51:56 -06:00 |
|
Gregory Nutt
|
53bc0bce00
|
Viewtool STM32F107: Add a NSH configuration with network support
|
2013-12-25 12:14:24 -06:00 |
|
Gregory Nutt
|
0d6a046e67
|
Add support for Sharp Memory LCD on the Maple board
|
2013-12-23 16:47:31 -06:00 |
|
Gregory Nutt
|
560ae31a99
|
Improved debug output in the high pri, nested interrupt test
|
2013-12-23 14:16:30 -06:00 |
|
Gregory Nutt
|
5c28d5a15b
|
Disable CONFIG_ARCH_INT_DISABLEALL: It does not work in its current form
|
2013-12-23 14:15:11 -06:00 |
|
Gregory Nutt
|
d41bfe4d5b
|
Fixes a few more high priority, nested interrupt logic
|
2013-12-23 11:13:56 -06:00 |
|
Gregory Nutt
|
bb6ba0b46b
|
Forget to set priority of TIM6 to high priority
|
2013-12-22 15:08:09 -06:00 |
|
Gregory Nutt
|
483a4d8d2b
|
Finish the high priority, nested interrupt handler test (does not work)
|
2013-12-22 13:23:57 -06:00 |
|
Gregory Nutt
|
facf988cb2
|
Add logic to configure interrupt controller debug; Fix high priority, nested interrupt build problems
|
2013-12-22 11:16:29 -06:00 |
|
Gregory Nutt
|
540ab63aa6
|
Initial framework for a test of high-pri, nested interrupts. Incomplete and does not work
|
2013-12-22 10:12:26 -06:00 |
|
Gregory Nutt
|
b718fd007c
|
viewtool configuration will not support boad with STM32F103VC mounted; converted one stm3210e-eval configuration to use kconfig-frontends
|
2013-12-22 08:51:36 -06:00 |
|
Gregory Nutt
|
461a8b4433
|
Remove all configuration variable documentation from configs/README.txt and Docuemntation/NuttXPortingGuidle.html. The current NuttX configuration is documented in Kconfig files and in Documentation/NuttXSonfigVariables.html. The older configuration variable documentation is not being maintained and, hence, is a liability
|
2013-12-20 18:25:36 -06:00 |
|
Gregory Nutt
|
385e1fcfb1
|
Cosmetic spaces for tabs
|
2013-12-20 13:31:00 -06:00 |
|