sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
29,809 Commits 1 Branch 0 Tags 291 MiB
918480047a
Commit Graph

13283 Commits

Author SHA1 Message Date
raiden00pl
c1090164f5 stm32/Kconfig: update COMP and OPAMP definitions 2017-03-26 09:34:17 +02:00
raiden00pl
6594c65a77 stm32_comp.c: cosmetic 2017-03-26 09:30:23 +02:00
Gregory Nutt
7d57a2b2bd Trivial changes from review of last PR. 2017-03-25 10:38:41 -06:00
Mateusz Szafoni
c174074dd8 Merged in raiden00/nuttx (pull request #299) 
Add COMP character driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-25 16:29:02 +00:00
Gregory Nutt
602546f852 Minor typo fix 2017-03-25 10:23:53 -06:00
raiden00pl
a806aedb13 STM32F33: Support for COMP character driver 2017-03-25 16:57:43 +01:00
Alexander Oryshchenko
61ff3c6b84 I needed to use DS3231, I remember that in past it worked ok, but now for stm32f4xx is used another driver (chip specific, stm32f40xxx_i2c.c) and DS3231 driver doesn't work. After investigating a problem I found that I2C driver (isr routine) has a few places there it sends stop bit even if not all messages are managed. So, e.g., removing stm32_i2c_sendstop (#1744) and adding stm32_i2c_sendstart after data reading helps to make DS3231 working. Verified by David Sidrane. 2017-03-24 06:44:33 -06:00
Aleksandr Vyhovanec
82a84a8d98 Merged nuttx/nuttx into master 2017-03-24 11:40:09 +03:00
no1wudi
4c6680df99 Merged in no1wudi/nuttx (pull request #291) 
fix compile error when disabled the flash data cache corruption for stm32 f1xx

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-24 00:58:26 +00:00
no1wudi
fd76a3db05 fix spacing 2017-03-24 08:52:46 +08:00
no1wudi
5797e84893 Merged nuttx/nuttx into master 2017-03-24 08:40:40 +08:00
David Sidrane
66910577be stm322_flash:missing unlock on F1 HSI off path 2017-03-23 14:22:45 -10:00
David Sidrane
7e3bec635b stm32_i2c_alt:Move def of regval to top func def per CS 2017-03-23 11:50:37 -10:00
David Sidrane
d25f8710d2 stm32f40xxx_i2c:Duplicate non CS dev of regval 2017-03-23 11:37:12 -10:00
David Sidrane
f5cf22d871 stm32_i2c_alt:Duplicate non CS dev of regval 2017-03-23 11:36:44 -10:00
David Sidrane
c2a1b719be stm32_flash:Need conditinal on non F4 targets 2017-03-23 11:33:32 -10:00
rg
9353ca6039 STM32 I2C: Do not allow CONFIG_I2C_POLLED and CONFIG_I2C_DMA 2017-03-23 11:24:18 -06:00
Aleksandr Vyhovanec
06af125e45 The interrupt occurs over the counter overflow 2017-03-23 17:34:45 +03:00
no1wudi
45f5d30e2e fix compile error when disabled the flash data cache corruption for stm32 f1xx 2017-03-23 13:38:26 +08:00
David Sidrane
c73b65c9b9 stm32f7:stm32_allocateheap.c There are 5 configurations 2017-03-22 23:56:54 +00:00
Gregory Nutt
3fb0a00c35 Small changes from review of last PR. Plus spacing and typo fix. 2017-03-22 17:32:52 -06:00
Gregory Nutt
947acd6c1a Small changes from review of last PR 2017-03-22 15:53:12 -06:00
José Roberto de Souza
b9b4f184a7 stm32: Add workaround for flash data cache corruption on read-while-write 
This is a know hardware issue on some STM32 see the errata of your model
and if you make use of both memory banks you should enable it.
 2017-03-22 13:14:19 -07:00
José Roberto de Souza
09f70c462d stm32: Make up_progmem thread safe 
Writing to a flash sector while starting the erase of other sector
have a undefined behavior so lets add a semaphore and syncronize
access to Flash registers.

But for the semaphore to work it needs to be initialized so each
board needs call stm32_flash_initialize() on initialization, so
to avoid runtime problems it is only using semaphore and making
it thread safe if initialized, after all boards starts to call
stm32_flash_initialize() we can remove the boolean and the check.
 2017-03-22 13:14:15 -07:00
José Roberto de Souza
80f56e75f9 stm32: Fix erase sector number for microcontrolers with more than 11 sectors 
Erase a sector from the second bank cause the bit 4 of SNB being set
but never unsed, so trying to erase a sector from the first bank
was acually eraseing a sector from the second bank.
 2017-03-22 12:42:20 -07:00
David S. Alessio
7f2c4c4274 XMC4xxx: Add FPU support 2017-03-22 12:04:32 -06:00
Gregory Nutt
3f3aa73b8f XMC4xxx: USIC SCTR register, appears taht both WLE and FLE fields hold value - 1. 2017-03-21 17:51:55 -06:00
Gregory Nutt
ea93357a1e XMC4xxx: Fix a typo in the SCU header file 2017-03-21 17:05:47 -06:00
rg
82a5dfddb4 The attached .patch implements DMA support for the stm32f4 I2C. Max and I have verified that it works on our systems. 2017-03-21 16:44:11 -06:00
Gregory Nutt
343f7ceab2 XMC4xxx: Misc clock clean-up; PBDIV should be controllable from board.h 2017-03-21 15:05:17 -06:00
Gregory Nutt
602bdd13fb XMC4xxx: Fix a pin configuration problem. Fix some mispellings. 2017-03-21 11:24:04 -06:00
Gregory Nutt
21a626878a XMC4xxx: Clean up problems associated with USIC initialization. USIC still does not work in UART mode. 2017-03-21 10:55:52 -06:00
Gregory Nutt
805a4f65e9 XMC4xxx: Fixes to HIB domain setup, GPIO pin configuration. 2017-03-21 09:31:44 -06:00
Gregory Nutt
886dadae0a XMC4xxx: Minor updates to naming and comments 2017-03-20 18:10:23 -06:00
Gregory Nutt
b9e29d1083 XMC4xxx: Clean up memory map 2017-03-20 17:08:09 -06:00
Gregory Nutt
4ba091933e XMC4xxx: Fix for early bringup problems 2017-03-20 16:31:35 -06:00
Gregory Nutt
3a91ba5264 XMC4xxx: Plug last holes to get a first, clean build. 2017-03-20 13:46:02 -06:00
Gregory Nutt
985c137b78 XMC4xxx: Finishes system timer logic. 2017-03-20 13:20:31 -06:00
Gregory Nutt
4519b679af XMC4xxx: Finish code for USIC serial driver. 2017-03-20 12:47:26 -06:00
Gregory Nutt
8a3422f837 XMC4xxx: Complete lowputc logic 2017-03-20 11:25:51 -06:00
no1wudi
7d6ee0f222 fix a typo 2017-03-20 09:50:27 +08:00
Gregory Nutt
5df421488c XMC4xxx: Add USIC baudrate calculation. 2017-03-19 18:11:38 -06:00
Gregory Nutt
ae32905fe8 XMC4xxx: Simply some USIC logic, add USIC interface to disable a channel. Add USIC enable logic to UART configuration (a lot more to do there). 2017-03-19 17:06:44 -06:00
Gregory Nutt
e1e4af7454 XMC4xxx: More Ethernet definitions. 2017-03-19 16:25:46 -06:00
Gregory Nutt
c023d41522 XMC4xxx: Beginning of Ethernet register header file 2017-03-19 13:47:27 -06:00
Gregory Nutt
e8a30890f2 Cosmetic changes from review of last PR. 2017-03-19 13:05:31 -06:00
Mateusz Szafoni
9f699e6715 Merged in raiden00/nuttx (pull request #281) 
STM32F3: Add COMP support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-19 18:55:06 +00:00
Gregory Nutt
5c0be816a5 XMC4xxx: Add commin USIC support logic for use in all USIC configurations. 2017-03-19 12:48:37 -06:00
raiden00pl
651b8360c6 STM32F33: Add COMP support 2017-03-19 18:36:44 +01:00
raiden00pl
c760d00158 stm32f33xx_comp.h: fix typos 2017-03-19 18:27:31 +01:00
Gregory Nutt
59b9ef8fdc XMC4xxx: Revise configuration for USICs. Three USICs but 4 UARTs possible with each channel of USIC. 2017-03-19 11:10:31 -06:00
Gregory Nutt
a9aa11f968 XMC4xxx: A few compilation issues; still a long way to go. 2017-03-19 10:03:31 -06:00
Gregory Nutt
064ae17af5 XMC4xxx: Finishes UIC register definition header file. 2017-03-19 09:46:57 -06:00
Gregory Nutt
9110b7d45c XMC4xxxx: Add more definitions to USIC register definition header. 2017-03-19 08:44:28 -06:00
Gregory Nutt
6b5dc49573 XMC4xxx: Flesh out USIC header file. Still needs a little work. 2017-03-18 19:16:29 -06:00
Gregory Nutt
47cd105e32 XMC4xxxx: Final clean-up of SCU heder file 2017-03-18 16:41:33 -06:00
Gregory Nutt
e82a3b3ca7 XMC4xxx: Completes most SCU register definitions. 2017-03-18 16:13:59 -06:00
Gregory Nutt
301e70b073 XMC4xxx: A few more SCU register definitions. 2017-03-18 15:19:02 -06:00
Gregory Nutt
7706810fc0 XMC4xxx: A few more SCU register definitions. 2017-03-18 14:08:35 -06:00
Gregory Nutt
cfa75de85a XMC4xxx: A few more SCU register definitions. 2017-03-18 13:09:07 -06:00
Mateusz Szafoni
5907ec8cf9 Merged in raiden00/nuttx (pull request #279) 
STM32F33: Move DMA logic to a separate files + add ADC support

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-18 17:54:19 +00:00
Gregory Nutt
9769c67d4d XMC4xxx: Add pin multiplexing header file. 2017-03-18 11:25:14 -06:00
raiden00pl
fd42900dcc STM32F33: Add ADC support 2017-03-18 16:34:24 +01:00
raiden00pl
49e4e62aab STM32F33: Move DMA logic to a separate files 2017-03-18 16:31:06 +01:00
Gregory Nutt
3f0c4871c8 Merge remote-tracking branch 'origin/master' into xmc4 2017-03-18 06:48:37 -06:00
David Cabecinhas
148e74fd10 Merged in dcabecinhas/nuttx/fix_intstack_allocation (pull request #270) 
ARM: Fix off-by-one interrupt stack allocation (revert missed change in up_initialize.c)

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-18 12:25:18 +00:00
Gregory Nutt
c6d5d3bded XMC4xxx: All register definition files need to include memorymap.h 2017-03-17 16:44:26 -06:00
Gregory Nutt
7bde01df98 XMC4C: Clean up some naming, fix some comments, add empty PINMUX header file. 2017-03-17 16:40:29 -06:00
Gregory Nutt
5ae9564b7d XMC4xxx: GPIO write should use OMR, not OUTPUT register. 2017-03-17 16:26:11 -06:00
Gregory Nutt
8bfb735351 XMC4xxx: Finishes implementation of GPIO support. 2017-03-17 13:02:07 -06:00
Gregory Nutt
41758d8e4c XMC4xxx: minor update to GPIO definitions. 2017-03-17 11:22:42 -06:00
Gregory Nutt
d2d54b4ae7 XMC4xxx: Add framework and definitions for GPIO support 2017-03-17 11:18:24 -06:00
Gregory Nutt
042b33414a XMC4xxx: Missing OMR field in PORT register definition header file. 2017-03-17 08:28:40 -06:00
Gregory Nutt
f672478e7e XMC4xxx: Completes the PORT register definition header file. 2017-03-17 08:12:21 -06:00
Gregory Nutt
6b167122c0 XMC4xxx: Move clock utility functions from xmc4_clocconfig.c to new xmc4_clockutils.c 2017-03-16 14:26:22 -06:00
Gregory Nutt
e30e47683b XMC4xxx: Add partial PORTS header file. 2017-03-16 13:24:32 -06:00
Gregory Nutt
e67baffc15 XMC4xxx: Add partial USIC header file. 2017-03-16 13:04:01 -06:00
Gregory Nutt
5693f26a5e XMC4xx: Fix several early compilation problems. 2017-03-16 11:30:02 -06:00
Gregory Nutt
fe610e7a1d XMC4500 Relax: Add basic board support infrastructure of Infineon XMC4500 Relax Lite v1 2017-03-16 10:52:01 -06:00
Gregory Nutt
66d001d0e1 XMC4xxx: Initial clock configuration logic. 2017-03-16 09:48:57 -06:00
no1wudi
812578c066 Merge branch 'master' of https://bitbucket.org/nuttx/nuttx 2017-03-16 23:07:38 +08:00
no1wudi
c613a360a3 Merge branch 'master' of https://bitbucket.org/no1wudi/nuttx 2017-03-16 23:06:54 +08:00
no1wudi
1280c91564 fixed descritpions of NUC100/120 2017-03-16 23:04:52 +08:00
David Cabecinhas
4b65817e99 ARM: Set EABI stack alignment for all ARM architectures (remove OABI code) 2017-03-16 19:58:50 +08:00
David Cabecinhas
08e92abb0b ARM: Remove redundant interrupt stack coloring 2017-03-16 19:13:39 +08:00
Gregory Nutt
059e398185 XMC4xxx: A few more SCU register bit definitions. 2017-03-15 18:50:48 -06:00
Gregory Nutt
450d747265 Merge remote-tracking branch 'origin/master' into xmc4 2017-03-15 13:10:17 -06:00
Gregory Nutt
519f14fbb5 XMC4xxx: A few more SCU register bit definitions. 2017-03-15 11:43:58 -06:00
Gregory Nutt
77f244ed7b XMC4xx: Add logic to get the CPU frequency. 2017-03-15 10:22:24 -06:00
Gregory Nutt
772b3cf21b XMC4xxx: Add Peripheral Memory Map header file. 2017-03-14 19:07:19 -06:00
Gregory Nutt
a635e7df7a XMC4xxx: Add SCU header file. 2017-03-14 16:19:30 -06:00
Simon Piriou
bf9391a1fe photon: porting wlan device 2017-03-14 21:13:36 +01:00
Gregory Nutt
2430049e3b arch/arm/include/xmc4: More support for Infineon XMC4xxx arch. Still incomplete. 2017-03-14 13:04:09 -06:00
Gregory Nutt
dc4ac48aad arch/arm/src/xmc4: Initial, partial support for Infineon XMC4xxx 2017-03-14 11:56:29 -06:00
Gregory Nutt
240d1e9b3b Update some comments 2017-03-14 11:39:10 -06:00
Gregory Nutt
c97581e99b Update some comments 2017-03-14 11:16:35 -06:00
Gregory Nutt
4a93b0dc0c Update comments. 2017-03-14 08:44:56 -06:00
David
33f7bfa351 ARM: Fix off-by-one interrupt stack allocation (revert missed change in up_initialize.c) 2017-03-14 21:01:44 +08:00
David Cabecinhas
86400a252d ARM: Fix off-by-one interrupt stack allocation in 8-byte aligned architectures 2017-03-14 20:01:45 +08:00
Gregory Nutt
4d33f26717 Update some comments 2017-03-12 12:33:44 -06:00
Gregory Nutt
d9cdb6c383 STM32; OTG host implementations of stm32_in_transfer() must obey the polling interval for the case of isochronous and itnerrupt endpoints. 2017-03-12 08:39:30 -06:00
Gregory Nutt
98a98a0c8b Minor change for consistency with a previous commit. 2017-03-12 07:20:10 -06:00
Gregory Nutt
9b11187b2a STM32 OTG HS: A little research reveals that only the F2 RCC initialization set the OTGHSULPIEN bit and Photon is the only F2 board configuration that uses OTG . Therefore, we can simplify the conditional logic of the last PR. Negative logic was used (#ifndef BOARD_DISABLE_USBOTG_HSULPI) to prevent bad settings in other configurations. But give these facts, the preferred positive logic now makes more sense (#ifdef BOARD_ENABLE_USBOTG_HSULPI). 2017-03-11 18:00:38 -06:00
Gregory Nutt
e0f7b9582a STM32: Review of last STM32 F2 PR. Progate changes to STM32 F4 and F7 OTGHS. Rename some configs/photon/src files. Naming can be either photon_ or stm32_ but must be consistent. 2017-03-11 16:31:11 -06:00
Simon Piriou
11876dc090 Merged in spiriou/nuttx/usb_fix (pull request #265) 
stm32f20xxx: add BOARD_DISABLE_USBOTG_HSULPI flag

Approved-by: Gregory Nutt
 2017-03-11 22:04:51 +00:00
Simon Piriou
70d8f0189d stm32f20xxx: add BOARD_DISABLE_USBOTG_HSULPI flag 2017-03-11 18:15:18 +01:00
David Sidrane
cdfc158f90 up_initialize.c edited online with Bitbucket 2017-03-11 15:40:48 +00:00
David Sidrane
c9ecb3c378 As discovered by dcabecinhas. This fix assume the 8 byte alignment options for size stack size or this will overwrite the first word after TOS 
See https://github.com/PX4/Firmware/issues/6613#issuecomment-285869778
 2017-03-11 15:35:03 +00:00
Gregory Nutt
aadf6c6e16 STM32 F33: Fix another error in ADC base address usage. 2017-03-10 17:49:32 -06:00
Gregory Nutt
852b189910 STM32 F33 ADC: Correct bad definitions of base addresses; Fix naming collision by changing colliding STM32_ADC12_BASE to STM32_ADC12_CMN_BASE 2017-03-10 17:46:19 -06:00
Gregory Nutt
24816cb08b All STM32 host drivers. In IN endpoint retry, delay for a clock tick to give some breathing space for the CPU. EXPERIMENTAL change. 2017-03-10 10:25:43 -06:00
David Sidrane
2baffab16e WS 2017-03-10 15:42:59 +00:00
David Sidrane
acaebb361b STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to similar STM32 I2C drivers. 
Save elapsed time before handling I2C in stm32_i2c_sem_waitstop()
   This patch follows the same logic as in previous fix to
   stm32_i2c_sem_waitdone().
   It is possible that a context switch occurs after I2C registers are read
   but before elapsed time is saved in stm32_i2c_sem_waitstop(). It is then
   possible that the registers were read only once with "elapsed time"
   equal 0. When scheduler resumes this thread it is quite possible that
   now "elapsed time" will be well above timeout threshold. In that case
   the function returns and reports a timeout, even though the registers
   were not read "recently".
   Fix this by inverting the order of operations in the loop - save elapsed
   time before reading registers. This way a context switch anywhere in the
   loop will not cause an erroneous "timeout" error.
 2017-03-10 05:07:39 -10:00
Freddie Chopin
3cd66af889 ave elapsed time before handling I2C in stm32_i2c_sem_waitstop() 
This patch follows the same logic as in previous fix to
stm32_i2c_sem_waitdone().

It is possible that a context switch occurs after I2C registers are read
but before elapsed time is saved in stm32_i2c_sem_waitstop(). It is then
possible that the registers were read only once with "elapsed time"
equal 0. When scheduler resumes this thread it is quite possible that
now "elapsed time" will be well above timeout threshold. In that case
the function returns and reports a timeout, even though the registers
were not read "recently".

Fix this by inverting the order of operations in the loop - save elapsed
time before reading registers. This way a context switch anywhere in the
loop will not cause an erroneous "timeout" error.
 2017-03-10 07:35:10 -06:00
Gregory Nutt
9cd3f7f80a STM32, STM32 F7, STM32 L4: OTG host drivers: Do not do data toggle if interrupt transfer is NAKed. Sugested by webbbn@gmail.com 2017-03-09 15:07:31 -06:00
Simon Piriou
6768831851 Merged in spiriou/nuttx (pull request #257) 
STM32F2: add USB OTG HS support for stm32f20xxx cores

Approved-by: Gregory Nutt
 2017-03-09 20:06:12 +00:00
Gregory Nutt
04297d1b0f Update some comments 2017-03-09 13:57:37 -06:00
Gregory Nutt
a3b4475474 STM32, STM32 F7, and STM32 L4: Back out part of 3331e9c49a. Returning immediately int he case of a NAK makes the Mass Storage Class driver unreliable. The retry/timeout logic is necessary. This implementation tries to implement a compromise: If a NAK is received after some data is received, then the partial data received is returned as with 3331e9c49a. If if a NAK is received with no data, then no longer returns the NAK error immediately but retries until data is received or a timeout occurs. Initial testing indicates that this fixes the issues the MSC. However, I hae concerns that if multiple sectors are read in one transfer, there could be NAKs between sectors as well and, in that case, then change will still cause failures. 2017-03-09 13:49:25 -06:00
Simon Piriou
31aef4a9c0 STM32F2: add USB OTG HS support for stm32f20xxx cores 2017-03-09 20:30:32 +01:00
David Sidrane
c8efeecfda Merged in david_s5/nuttx/upstream_kinetis (pull request #256) 
Kinetis:Allow Board to add Pullups on SDHC lines

Approved-by: Gregory Nutt
 2017-03-09 15:34:12 +00:00
David Sidrane
2700fd9e81 Kinetis:Allow Board to add Pullups on SDHC lines 2017-03-09 05:30:02 -10:00
Gregory Nutt
ee5ae3a57d STM32, STM32 F7, and STM32 L4: Clone Freddie Chopin's I2C change to similar STM32 I2C drivers. 2017-03-09 07:37:52 -06:00
Freddie Chopin
5a6d95dd9f ave elapsed time before handling I2C in stm32_i2c_sem_waitdone() 
It is possible that a context switch occurs after stm32_i2c_isr() call
but before elapsed time is saved in stm32_i2c_sem_waitdone(). It is then
possible that the handling code was executed only once with "elapsed
time" equal 0. When scheduler resumes this thread it is quite possible
that now "elapsed time" will be well above timeout threshold. In that
case the function returns and reports a timeout, even though the
handling code was not executed "recently".

Fix this by inverting the order of operations in the loop - save elapsed
time before handling I2C. This way a context switch anywhere in the loop
will not cause an erroneous "timeout" error.
 2017-03-09 07:29:12 -06:00
Gregory Nutt
92858d1096 Cosmetic changes from review of a previous PR 2017-03-09 07:00:44 -06:00
Andreas Bihlmaier
d5cb3f5a32 Merged in andreasBihlmaier/nuttx/fixes-lpc43_ssp (pull request #253) 
actually write modified value to register

Approved-by: Gregory Nutt
 2017-03-09 12:54:47 +00:00
Andreas Bihlmaier
ce908cec9c Merged in andreasBihlmaier/nuttx/fixes-lpc43_i2c (pull request #252) 
use correct macro for irqid (fortunately both point to LPC43_IRQ_EXTINT+18)

Approved-by: Gregory Nutt
 2017-03-09 12:53:56 +00:00
Andreas Bihlmaier
55bd808dcc Merged in andreasBihlmaier/nuttx/fixes-lpc43_ethernet (pull request #251) 
fix logic in preprocessor checks and correct arguments to lpc43_pin_config initialization

Approved-by: Gregory Nutt
 2017-03-09 12:53:22 +00:00
Andreas Bihlmaier
1c5ededc48 Merged in andreasBihlmaier/nuttx/fixes-lpc43_adc (pull request #250) 
fix logic error in lpc43_adc

Approved-by: Gregory Nutt
 2017-03-09 12:52:33 +00:00
Andreas Bihlmaier
871756b6c0 Merged in andreasBihlmaier/nuttx/fixes-lpc43_sct_and_sgpio_headers (pull request #249) 
Fix errors in LPC43 SCT and SGPIO headers.

Approved-by: Gregory Nutt
 2017-03-09 12:52:03 +00:00
Andreas Bihlmaier
be90fbd1a1 Merged in andreasBihlmaier/nuttx/fixes-lpc43_gpdma (pull request #248) 
rename LPC43_GPDMA_GLOBAL_CONFIG (already slipped previous commit C file); fix GPDMA_CONTROL_SBSIZE_*, improve usability of GPDMA_CONTROL_{S,D} macros

Approved-by: Gregory Nutt
 2017-03-09 12:51:20 +00:00
Andreas Bihlmaier
9227947543 Merged in andreasBihlmaier/nuttx/fixes-lpc4310203050_pinconfig (pull request #247) 
add missing PINCONF_INBUFFER in several places of lpc4310203050_pinconfig.h

Approved-by: Gregory Nutt
 2017-03-09 12:50:45 +00:00
Andreas Bihlmaier
9ba4ce0bb9 Merged in andreasBihlmaier/nuttx/change-adc0_mask (pull request #246) 
change Kconfig type of ADC0_MASK from hex to int; add ADC driver options to lpc43xx

Approved-by: Gregory Nutt
 2017-03-09 12:49:58 +00:00
ahb
7835e5bde8 actually write modified value to register 2017-03-09 11:33:09 +01:00
ahb
0dee37ffb3 use correct macro for irqid (fortunately both point to LPC43_IRQ_EXTINT+18) 2017-03-09 11:29:01 +01:00
ahb
f34d0382c3 fix logic in preprocessor checks and correct arguments to lpc43_pin_config initialization 2017-03-09 11:23:35 +01:00
ahb
e0a8d61804 fix logic error in lpc43_adc 2017-03-09 11:17:11 +01:00
ahb
9b023049a2 Fix errors in LPC43 SCT and SGPIO headers. 
Note: This has already been tested. However, I have to significantly clean up the actual drivers (C files) before committing them, too.
 2017-03-09 11:11:57 +01:00
ahb
aa92e14512 rename LPC43_GPDMA_GLOBAL_CONFIG (already slipped previous commit C file); fix GPDMA_CONTROL_SBSIZE_*, improve usability of GPDMA_CONTROL_{S,D} macros 2017-03-09 11:05:20 +01:00
ahb
41c79c431b add missing PINCONF_INBUFFER in several places of lpc4310203050_pinconfig.h 2017-03-09 10:48:25 +01:00
ahb
5bfa42c1b8 change Kconfig type of ADC0_MASK from hex to int; add ADC driver options to lpc43xx 2017-03-09 10:41:59 +01:00
ahb
67c86e5aa9 add LPC4337FET256 2017-03-09 10:30:28 +01:00
David Sidrane
45ccf0cb79 Merged in david_s5/nuttx/upstream_kinetis (pull request #243) 
Ensure interrups are back on BEFORE running code dependant on clock_systimer

Approved-by: Gregory Nutt
 2017-03-08 22:24:28 +00:00
David Sidrane
5158af0da6 Ensure interrups are back in BEFORE running code dependant on clock_systimer 2017-03-08 11:46:00 -10:00
David Sidrane
ab2337fa4b Merged in david_s5/nuttx/upstream_kinetis (pull request #242) 
Kinetis:Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with _PIN_OUTPUT_OPENDRAIN

Approved-by: Gregory Nutt
 2017-03-08 19:30:31 +00:00
David Sidrane
7ad9c7c6e8 Kinetis:Fixed GPIO _PIN_OUTPUT_LOWDRIVE swapped with _PIN_OUTPUT_OPENDRAIN 2017-03-08 09:13:02 -10:00
Andreas Bihlmaier
2ccd480e90 Merged in andreasBihlmaier/nuttx (pull request #240) 
fix lpc43_gpdma, largely typos

Approved-by: Gregory Nutt
 2017-03-07 13:35:38 +00:00
Gregory Nutt
0631c1aafa STM32 OTGFS, STM32 L4 and F7: Adapt Janne Rosberg's patch to STM32 OTGHS host to OTGFS host, and to similar implements for L4 and F7. 2017-03-07 07:17:24 -06:00
Janne Rosberg
3331e9c49a STM32 OTGHS host: stm32_in_transfer() fails and returns NAK if a short transfer is received. This causes problems from class drivers like CDC/ACM where short packets are expected. In those protocols, any transfer may be terminated by sending short or NUL packet. 2017-03-07 06:58:59 -06:00
ahb
073b3d2c9a fix lpc43_gpdma, largely typos 2017-03-07 11:16:08 +01:00
David Sidrane
940fefeb8a Fixed #if defined 2017-03-06 19:28:27 +00:00
Gregory Nutt
ba67eb742e STM32L4: Remove warning. Remove unused variable. 2017-03-05 14:21:00 -06:00
Gregory Nutt
464a3cf27c Kinetis: Eliminate warning when USE_EARLYSERIALINIT is not defined 2017-03-05 14:06:20 -06:00
Gregory Nutt
d3408809e4 sendfile(): Fix error introduced with commit ff73be870e. Noted by Maciej Wójcik 2017-03-05 11:50:34 -06:00
raiden00pl
e9884216c5 stm32f33xxx: Add HRTIM header file 2017-03-05 18:10:59 +01:00
Gregory Nutt
810fe33c3c STM32 F7 SDMMC: Use new interrupt argument facility. 2017-03-05 10:56:45 -06:00
raiden00pl
46d62b1e09 stm32f33xxx: Add ADC header file 2017-03-04 19:40:14 +01:00
raiden00pl
b866ea0dd0 stm32f33xxx_memorymap.h: Add COMP and OPAMP base adress 2017-03-04 19:36:56 +01:00
raiden00pl
a14ed630e8 stm32f33xxx: Add COMP header file 2017-03-04 19:35:17 +01:00
raiden00pl
da3dd1d69c stm32f33xxx: Add OPAMP header file 2017-03-04 19:32:50 +01:00
raiden00pl
3e3a13b4b0 stm32f33xxx: Add DAC header file 2017-03-04 19:30:08 +01:00
raiden00pl
71b0127bc1 chip/stm32_dac.h: fix typo 2017-03-04 19:23:33 +01:00
HuangQi
6febad2f2c fixed a typo 2017-03-04 11:26:22 +08:00
Gregory Nutt
d3c29a15d1 Remove unused variable warning. 2017-03-03 19:19:56 -06:00
Gregory Nutt
0f25b0a9f1 Correct a typo 2017-03-03 17:02:20 -06:00
Gregory Nutt
210896438c Kinetis PIN IRQ needs errno.h 2017-03-03 15:30:16 -06:00
Gregory Nutt
7bb19ad8bc STM32 Ethernet: Remove unused variable warning. 2017-03-03 15:24:00 -06:00
Gregory Nutt
8353ddbef4 STM32 L4 Serial: Ooops unmatched parenthesis 2017-03-03 15:18:09 -06:00
Gregory Nutt
9a33f41180 Kinetis PINIRQ: Improper type for return value. 2017-03-03 15:09:44 -06:00
Gregory Nutt
86239d4a73 Experimental change to STM32 Ethernet driver a success. Porting change to all other Ethernet drivers. 2017-03-03 14:45:09 -06:00
Gregory Nutt
fc5fca5145 Add MAX value definitions to go along with irq_t and irq_mapped_t 2017-03-03 11:48:20 -06:00
Gregory Nutt
e1218c4b4b Smaller vector tables: Add irq_mapped_t. 2017-03-03 10:20:40 -06:00
Gregory Nutt
c2b620b4f8 Implements support for smaller interrupt tables as described at http://www.nuttx.org/doku.php?id=wiki:howtos:smallvectors . This is largely the work of Mark Schulte. However, I have made several changes to match with the Wiki document. If you like the change, thanks go to Marc. For any errors you can blame me. 2017-03-03 09:20:25 -06:00
Gregory Nutt
f4bad1a280 stm32_gpiosetevent: GPIO IRQ logic no longer returns the xcpt_t oldhandler. This value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 16:34:37 -06:00
Gregory Nutt
4c82827ab1 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 14:37:22 -06:00
Gregory Nutt
4a4636c8a1 Tiva: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:58:00 -06:00
Gregory Nutt
7982b45367 STM32 L4: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:36:40 -06:00
Gregory Nutt
32383556fd PIC32MZ: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:23:45 -06:00
Gregory Nutt
1564b384e1 PIC32MX: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 12:10:05 -06:00
Gregory Nutt
edbc0eaace Kinetis-L GPIO: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 11:55:26 -06:00
Gregory Nutt
c7943586d8 STM32 Ethernet: Need two work structures so that pending poll work is not lost when an interrupt occurs. 2017-03-02 11:40:12 -06:00
Gregory Nutt
34a2839244 Kinetis GPIO: Pin IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 11:33:03 -06:00
Gregory Nutt
28d3344ac2 STM32/F7/L4: EXTI ALARM function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 09:18:10 -06:00
Gregory Nutt
d5e04a8c43 STM3 L4: EXTI COMP function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 09:03:12 -06:00
Gregory Nutt
89058172f1 STM32/F7/L4: EXOT PVD function no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 08:56:31 -06:00
Gregory Nutt
f5f9d82d5a arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing. 2017-03-02 08:43:33 -06:00
Gregory Nutt
094795e0ed Review parameter usage in sigtimedwait(); update some comments. 2017-03-02 06:39:05 -06:00
Mark Schulte
df0a05c682 Fix function signature for irq handler 2017-03-01 08:54:16 -06:00
Mark Schulte
9d22f5df35 Add argument to timer irq callback 2017-03-01 08:51:15 -06:00
Mark Schulte
4761a7d816 Add argument to timer irq callback 2017-03-01 08:49:14 -06:00
Mark Schulte
27c3c2605c Add argument to capture irq callback 2017-03-01 08:45:27 -06:00
Gregory Nutt
5987db47e5 Changes from review of last PR 2017-02-28 18:42:21 -06:00
David Sidrane
7c726e43a5 Merged in david_s5/nuttx/upstream_stm32f7_irqfixes (pull request #229) 
More build fiexes stm32f7 irqfixes

Approved-by: Gregory Nutt
 2017-03-01 00:38:03 +00:00
Gregory Nutt
ac6e552ff7 Fixes for coding standard: '*' needs to 'snuggle' with following variable name 2017-02-28 18:37:44 -06:00
David Sidrane
2ee99c9d4e STM32F7:stm32_tim irq fixes 2017-02-28 14:29:06 -10:00
Gregory Nutt
ded155c638 Fixes for coding standard: '*' needs to 'snuggle' with following variable name 2017-02-28 18:22:58 -06:00
Gregory Nutt
02b1e1ec1a Fixes for coding standard: '*' needs to 'snuggle' with following variable name 2017-02-28 18:22:57 -06:00
David Sidrane
964a1abada stm32f7:stm32_sdmmc irq fixes 2017-02-28 14:20:45 -10:00
David Sidrane
30c5e78d8f stm32f7:stm32_exti_pwr irq fixes 2017-02-28 14:20:19 -10:00
David Sidrane
ead561d684 Kinetis:kinetis_lpserial.c irq fix typeo 2017-02-28 23:12:56 +00:00
Gregory Nutt
274d367984 Fix another compile problem found in build testing. 2017-02-28 16:25:21 -06:00
Gregory Nutt
095411859e Fix another old interrupt handler function prototype 2017-02-28 14:00:31 -06:00
Gregory Nutt
fc79762e11 Fix a warning due to a naming collision 2017-02-28 13:36:56 -06:00
Gregory Nutt
70182bf690 Fix more problems found in build testing. 2017-02-28 11:34:03 -06:00
Gregory Nutt
1c8d3e1f14 STM32 F7: Fix errors related to GPIO EXTI 2017-02-28 11:30:54 -06:00
Gregory Nutt
a19b39a9e3 EFM32 Serial: Convert to use new interrupt argument interface. 2017-02-28 11:24:06 -06:00
Gregory Nutt
ac7307cca0 Trivial, cosmetic changes from review. 2017-02-28 11:11:11 -06:00
David Sidrane
d75dfcfb4b Merged in david_s5/nuttx/upstream_irqfixes (pull request #227) 
STM32 irqfixes found in build testing

Approved-by: Gregory Nutt
 2017-02-28 17:08:21 +00:00
David Sidrane
c8ac29574b STM32:stm32_wwd Fixed irq interface 2017-02-28 07:04:47 -10:00
David Sidrane
6443aec36b STM32:stm32_sdio Fixed irq interface 2017-02-28 07:04:34 -10:00
Gregory Nutt
813dc90505 STM32 L4 Serial: Convert to use new interrupt argument interface. 2017-02-28 11:02:09 -06:00
Gregory Nutt
61639c1aa3 STM32 F7 Serial: Convert to use new interrupt argument interface. 2017-02-28 10:58:22 -06:00
Gregory Nutt
17af125390 STM32 Serial: Convert to use new interrupt argument interface. 2017-02-28 10:54:31 -06:00
Gregory Nutt
dc93340a01 Convert more drivers to use new interrupt argument structure. 2017-02-28 09:29:09 -06:00
Gregory Nutt
370e188fa3 Convert more drivers to use new interrupt argument structure. 2017-02-28 09:05:01 -06:00
Gregory Nutt
ea1e6abfd7 Fix error found in build testing. 2017-02-28 08:41:44 -06:00
Gregory Nutt
7d24f45c7e STM32 1wire: Convert to use new interrupt argument infrastructure. 2017-02-28 08:39:02 -06:00
Gregory Nutt
efd11ebe35 Fixes from build testing 2017-02-28 08:33:52 -06:00
Gregory Nutt
c62180732e Adapt more drivers to utilize the IRQ argument feature. 2017-02-28 07:19:55 -06:00
Gregory Nutt
7d2d541c70 Adapt some drivers to utilize the IRQ argument feature. 2017-02-27 20:54:18 -06:00
Gregory Nutt
704df7bd39 IRQ arguments: Fix errors discovered in build testing 2017-02-27 19:28:24 -06:00
Gregory Nutt
f700e7b241 Merge remote-tracking branch 'origin/master' into irqattach 2017-02-27 18:58:34 -06:00
David Sidrane
d4963c2580 Merged in david_s5/nuttx/upstream_upstream_kinetis_usb (pull request #226) 
kinetis usb clean up

Approved-by: Gregory Nutt
 2017-02-28 00:54:04 +00:00
David Sidrane
0b637ddfb3 Kinetis:Define uart and lpuart versions of [early]serialinit 
Add serial init to centralize UART/LPUART management
   Use kinetis_ not up_ where arch specific
   Defined kinetis_[lp]uart_[early]serialinit to facilitate
    bring up both UARTs and LPUARTs as devices and a console

   Support ordering and merging of serial devices names.
 2017-02-27 14:27:31 -10:00
David Sidrane
d0c58fffb3 Kinetis:Refactor clocking in kinetis_usbdev 
1) Removed SIM_CLKDIV2[USBFRAC, USBDIV] setting as it is now
     done in kinetis_clockconfig
  2) Use BOARD_USB_CLKSRC to select the clock source to the
     USB block
  3) Removed warning
  4) Removed CONFIG_TEENSY_3X_OVERCLOCK from the driver as
     the board.h will now provide BOARD_SIM_CLKDIV2_USBDIV
     and BOARD_SIM_CLKDIV2_USBFRAC to the kinetis_clockconfig
 2017-02-27 13:13:24 -10:00
David Sidrane
1c518b223d Kinetis:Add the configuring SIM_CLKDIV2[USBFRAC, USBDIV] in kinetis_clockconfig 
If a board.h provides BOARD_SIM_CLKDIV2_FREQ it will configure the
  SIM_CLKDIV2 based on the additional provided
  BOARD_SIM_CLKDIV2_USBFRAC and BOARD_SIM_CLKDIV2_USBDIV

  The reason for doing this globaly is that the output the
  SIM_CLKDIV2 divisor may be also used for other IP blocks in
  future configurations (as is done for SIM_CLKDIV3)
 2017-02-27 13:06:01 -10:00
David Sidrane
b9dcedf289 Kinetis:Fixed unused warning 2017-02-27 11:22:49 -10:00
David Sidrane
4bdf732fc7 Kinetis:Fixed kinetis_uartreset call in kinetis_lpserial.c 2017-02-27 11:22:49 -10:00
Gregory Nutt
95856946d2 Interrupt argument bugfixes 2017-02-27 15:22:35 -06:00
Gregory Nutt
80dba27434 Fix copy past type: xcptr_t -> xcpt_t 2017-02-27 15:00:42 -06:00
Gregory Nutt
2ef4433220 Missing interrupt argument parameter. 2017-02-27 14:53:37 -06:00
Gregory Nutt
44abbe60aa Fix typo in name of callback field. 2017-02-27 14:51:29 -06:00
Gregory Nutt
aa8d4422a5 Fix some mismatched function prototypes 2017-02-27 14:43:10 -06:00
Gregory Nutt
d9fec7fe4c More missing arguments to interrupt handling. 2017-02-27 14:26:04 -06:00
Gregory Nutt
67de2e5f66 Add argument to STM32 EXTI interrupt handlers. 2017-02-27 14:21:30 -06:00
David Sidrane
3ae4183971 Kinetis:Fixed C&P of stm32 on kinetis_fpuconfig 2017-02-27 09:12:39 -10:00
David Sidrane
ddb00217be Kinetis:Fixed up_rxint - did not disable the RX interuppts 
There was an OR where and AND NOT was needed.
 2017-02-27 07:19:19 -10:00
Gregory Nutt
7e8e869352 Add more missing arguments to interrupt handling functions. 2017-02-27 11:14:21 -06:00
Gregory Nutt
6a3add7230 STM32 TIM: Correct function prototype. 2017-02-27 11:03:10 -06:00
Gregory Nutt
a581e9206d Convert remaining serial drivers to use use irq_attach. 2017-02-27 10:27:14 -06:00
Gregory Nutt
e5be4f7fe2 Merge remote-tracking branch 'origin/master' into irqattach 2017-02-27 09:13:41 -06:00
Gregory Nutt
221c94e568 Fix typo from a previouis commit 2017-02-27 08:57:21 -06:00
Gregory Nutt
4cd31be19d Convert some serial drivers to use use irq_attach. 2017-02-27 08:55:21 -06:00
Gregory Nutt
b651e73057 STM32: Fix mismatched prototype 2017-02-27 08:18:37 -06:00
Gregory Nutt
2321560690 More missing argument paramters in interrupt handlers. 2017-02-27 08:06:07 -06:00
Gregory Nutt
2e30b9b252 More missing argument paramters in interrupt handlers. 2017-02-27 07:46:36 -06:00
Gregory Nutt
70532f6548 Kinetis: More needed in last pinirq change. 2017-02-27 07:24:57 -06:00
Gregory Nutt
6e2ee2b07f Kinetis: GPIO interrupt handling needs handler argument. 2017-02-27 07:20:21 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
433ed93aa0 Add some comments. 2017-02-27 06:25:31 -06:00
Gregory Nutt
1ed7bec85f Merge branch 'master' of bitbucket.org:nuttx/nuttx 2017-02-26 14:53:48 -06:00