Gregory Nutt
|
86ebe4725b
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
c6273d083d
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
3985dc9120
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
c7a51f4ef1
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
9b76a1b758
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
b39b227e2a
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
49deb059d4
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
0aa7209765
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
7edc6a5666
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
caba61999a
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
1ff92f2f95
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
7b9c44101d
|
SAMA5D3 HSMCI: TX DMA is again disabled
|
2014-08-05 07:07:39 -06:00 |
|
Gregory Nutt
|
19df85d31b
|
SAMA5: Some usage documents for media players
|
2014-08-04 19:23:20 -06:00 |
|
Gregory Nutt
|
23024b2d6a
|
SAMA5: Some usage documents for media players
|
2014-08-04 19:23:20 -06:00 |
|
Gregory Nutt
|
8d13a7cfcd
|
WM8904: Update READMEs and defconfigs to last tested configuration
|
2014-08-04 15:36:16 -06:00 |
|
Gregory Nutt
|
cc5c1b6539
|
WM8904: Update READMEs and defconfigs to last tested configuration
|
2014-08-04 15:36:16 -06:00 |
|
Gregory Nutt
|
971e14eeb1
|
WM8904 interface enable method now returns the previous interrupt state. Correct ordering of some WM8904: Need to provide MCLK before initializing the WM8904, not after
|
2014-08-04 14:56:20 -06:00 |
|
Gregory Nutt
|
e30d31367a
|
WM8904 interface enable method now returns the previous interrupt state. Correct ordering of some WM8904: Need to provide MCLK before initializing the WM8904, not after
|
2014-08-04 14:56:20 -06:00 |
|
Gregory Nutt
|
930a986dc4
|
Correct the WM8904 interrupt configuration, active high level. Fix that and don't pull-up
|
2014-08-04 14:54:20 -06:00 |
|
Gregory Nutt
|
eebdae30b2
|
Correct the WM8904 interrupt configuration, active high level. Fix that and don't pull-up
|
2014-08-04 14:54:20 -06:00 |
|
Gregory Nutt
|
02e5721251
|
SAMA5 WM8904: Add option to use MAINCK as WM8904 MCLK
|
2014-08-03 11:01:02 -06:00 |
|
Gregory Nutt
|
1f213064e0
|
SAMA5 WM8904: Add option to use MAINCK as WM8904 MCLK
|
2014-08-03 11:01:02 -06:00 |
|
Gregory Nutt
|
1db7842e2e
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
159bcc255d
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
b4eb6ea9ca
|
SAMA5D3X-EK NxPlayer Configuration: Update with last WM8904 settings
|
2014-08-02 14:27:42 -06:00 |
|
Gregory Nutt
|
108ca4eaa5
|
SAMA5D3X-EK NxPlayer Configuration: Update with last WM8904 settings
|
2014-08-02 14:27:42 -06:00 |
|
Gregory Nutt
|
0b23fc2c86
|
WM8904: Ad the MCLK frequency to the interface definition. The WM8904 driver needs to know this frequency in order to configure the FLL to generate the correct bitrate
|
2014-08-01 18:37:56 -06:00 |
|
Gregory Nutt
|
1f2428c087
|
WM8904: Ad the MCLK frequency to the interface definition. The WM8904 driver needs to know this frequency in order to configure the FLL to generate the correct bitrate
|
2014-08-01 18:37:56 -06:00 |
|
Gregory Nutt
|
66c4db92d4
|
Add debug logic to dump WM8904 registers
|
2014-08-01 18:07:20 -06:00 |
|
Gregory Nutt
|
e59bb45b33
|
Add debug logic to dump WM8904 registers
|
2014-08-01 18:07:20 -06:00 |
|
Gregory Nutt
|
b722e46427
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
83dab03576
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
2e77455c6f
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
805a02965c
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
67792ef05b
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
50bd2ba46c
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
906edfef85
|
Updated README
|
2014-07-31 15:00:24 -06:00 |
|
Gregory Nutt
|
e836a974a5
|
Updated README
|
2014-07-31 15:00:24 -06:00 |
|
Gregory Nutt
|
986fd56650
|
SAMA5D3x-EK NxPlayer: Updated Configuration
|
2014-07-31 11:32:44 -06:00 |
|
Gregory Nutt
|
5074f6cf7e
|
SAMA5D3x-EK NxPlayer: Updated Configuration
|
2014-07-31 11:32:44 -06:00 |
|
Gregory Nutt
|
92194800b4
|
SAMA5D3x-EK: Add a configuration to support the command line NxPlayer.
|
2014-07-31 11:17:28 -06:00 |
|
Gregory Nutt
|
72f43393ed
|
SAMA5D3x-EK: Add a configuration to support the command line NxPlayer.
|
2014-07-31 11:17:28 -06:00 |
|
Gregory Nutt
|
b1d63af30e
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:15:52 -06:00 |
|
Gregory Nutt
|
8450147004
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:15:52 -06:00 |
|
Gregory Nutt
|
0fb3f7803c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
c657139b30
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
025e5bc3a5
|
SAMA5D3X-EK NSH: Refresh configuration
|
2014-07-31 11:13:10 -06:00 |
|
Gregory Nutt
|
78ffe6df56
|
SAMA5D3X-EK NSH: Refresh configuration
|
2014-07-31 11:13:10 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
276cc44878
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
7b1b915226
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
ff0de0d603
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
53930d5531
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
8e20aae28f
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
d09ee81320
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
3e49c4c510
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
8621769516
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
c79f86c72c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
54986c41d8
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
Gregory Nutt
|
d8f85d1caa
|
SAMA5 PCK: Add support for the slow clock as the PCK clock source
|
2014-07-19 13:55:08 -06:00 |
|
Gregory Nutt
|
f240f7e513
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
bad3ad58cb
|
SAMA5: Add slow clock support
|
2014-07-19 13:07:55 -06:00 |
|
Gregory Nutt
|
173c49d3fd
|
SAMA5D4-EK NxWM Configuration: Increase number of preallocated watchdogs and don't save child status (it is not being reaped)
|
2014-07-17 17:56:36 -06:00 |
|
Gregory Nutt
|
59d0be1b96
|
SAMA5D4-EK NxWM Configuration: Increase number of preallocated watchdogs and don't save child status (it is not being reaped)
|
2014-07-17 17:56:36 -06:00 |
|
Gregory Nutt
|
117765da5e
|
NxWM: Increase default priority of mouse and keyboard listener threads. Does not seem to make any difference but still seems like a good idea
|
2014-07-17 15:06:05 -06:00 |
|
Gregory Nutt
|
c7d8b6414f
|
NxWM: Increase default priority of mouse and keyboard listener threads. Does not seem to make any difference but still seems like a good idea
|
2014-07-17 15:06:05 -06:00 |
|
Gregory Nutt
|
bb6ba5198b
|
Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN
|
2014-07-16 16:31:31 -06:00 |
|
Gregory Nutt
|
8182037783
|
Rename CONFIG_NX_MOUSE to CONFIG_NX_INPUT, then add CONFIG_NX_XYINPUT_MOUSE and CONFIG_XYINPUT_TOUCHSCREEN
|
2014-07-16 16:31:31 -06:00 |
|
Gregory Nutt
|
aa8ff82b0f
|
SAMA4D3/4-EK NxWM: Use larger fonts
|
2014-07-14 11:23:41 -06:00 |
|
Gregory Nutt
|
11a297a881
|
SAMA4D3/4-EK NxWM: Use larger fonts
|
2014-07-14 11:23:41 -06:00 |
|
Gregory Nutt
|
085c48c52a
|
SAMA5D3x-EK: use large icons in the NxWM configuration like the SAMA5D4-EK
|
2014-07-14 06:37:33 -06:00 |
|
Gregory Nutt
|
d91ef71309
|
SAMA5D3x-EK: use large icons in the NxWM configuration like the SAMA5D4-EK
|
2014-07-14 06:37:33 -06:00 |
|
Gregory Nutt
|
63196bb13d
|
NxWM: Add 47x49 calculator icon
|
2014-07-13 09:58:50 -06:00 |
|
Gregory Nutt
|
b7f31fbb12
|
NxWM: Add 47x49 calculator icon
|
2014-07-13 09:58:50 -06:00 |
|
Gregory Nutt
|
0222f5816f
|
Fixes for clean NxWM build; Updated README files
|
2014-07-10 15:29:41 -06:00 |
|
Gregory Nutt
|
b2af7399b3
|
Fixes for clean NxWM build; Updated README files
|
2014-07-10 15:29:41 -06:00 |
|
Gregory Nutt
|
06f8b5a613
|
Update README's to document the new SAMA5D4-EK NxWM configuration
|
2014-07-10 14:10:36 -06:00 |
|
Gregory Nutt
|
72dcd81552
|
Update README's to document the new SAMA5D4-EK NxWM configuration
|
2014-07-10 14:10:36 -06:00 |
|
Gregory Nutt
|
ad9b0653f5
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
695d1d933c
|
Some cosmetic typo fixes
|
2014-07-09 07:12:16 -06:00 |
|
Gregory Nutt
|
94ed3a6f51
|
SAMA5D4-EK: Add options to support an LCD
|
2014-07-08 12:46:18 -06:00 |
|
Gregory Nutt
|
e4da8fee6f
|
SAMA5D4-EK: Add options to support an LCD
|
2014-07-08 12:46:18 -06:00 |
|
Gregory Nutt
|
19d8b0ce97
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
befcb1c961
|
Fix some cloned errors in SAM GPIO interrupt setup
|
2014-07-07 15:54:37 -06:00 |
|
Gregory Nutt
|
cbe4d3573d
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
44988c6ca6
|
Rename apps/examples/uip to apps/examples/webserver
|
2014-07-03 17:31:17 -06:00 |
|
Gregory Nutt
|
5ba0617e9c
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
Gregory Nutt
|
a5538e3431
|
SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why.
|
2014-07-03 12:28:11 -06:00 |
|
Gregory Nutt
|
285f66a2c1
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
0eb1666cb0
|
NET: Rename uiplib/UIPLIB to netlib/NETLIB
|
2014-07-02 16:04:25 -06:00 |
|
Gregory Nutt
|
234d118c61
|
SAMA5D4-EK: NSH configuration now supports the RTC
|
2014-06-29 07:40:37 -06:00 |
|
Gregory Nutt
|
339c8edf0e
|
SAMA5D4-EK: NSH configuration now supports the RTC
|
2014-06-29 07:40:37 -06:00 |
|
Gregory Nutt
|
caf1b2d641
|
SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp
|
2014-06-28 16:11:41 -06:00 |
|
Gregory Nutt
|
0443aa9947
|
SAMA5D4-EK: NSH confuration now has FAT/ROMFS, /dev/zero, /dev/random via TRNG, an NSH startup script, and a RAM disk at /tmp
|
2014-06-28 16:11:41 -06:00 |
|
Gregory Nutt
|
2be17d64b3
|
SAMA5D4-EK: Add bootloader that runs from ISRAM and loads an Intel HEX file into DRAM
|
2014-06-26 16:42:06 -06:00 |
|
Gregory Nutt
|
3fb8023bdf
|
SAMA5D4-EK: Add bootloader that runs from ISRAM and loads an Intel HEX file into DRAM
|
2014-06-26 16:42:06 -06:00 |
|
Gregory Nutt
|
37d6366f08
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
083986e814
|
SAMA5D4: USART peripheral clock appears to be MCK/2
|
2014-06-20 11:40:36 -06:00 |
|
Gregory Nutt
|
57da49beb3
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
2cf637692a
|
SAMA5D4-EK: Update pins used by HSMCI
|
2014-06-11 14:45:01 -06:00 |
|
Gregory Nutt
|
1634a11bd0
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
e0a07125c8
|
SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later
|
2014-06-10 17:40:25 -06:00 |
|
Gregory Nutt
|
962694b5f0
|
Updates to get the SAMA5D3 building again
|
2014-06-10 15:34:57 -06:00 |
|
Gregory Nutt
|
3f4751796a
|
Updates to get the SAMA5D3 building again
|
2014-06-10 15:34:57 -06:00 |
|
Gregory Nutt
|
ae142009da
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
1f64e9c5b9
|
SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently
|
2014-06-09 12:16:16 -06:00 |
|
Gregory Nutt
|
895851314f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
da8dfdcb6f
|
Updated SAMA5 SFR header file for the SAMA5D4
|
2014-06-08 07:48:36 -06:00 |
|
Gregory Nutt
|
ad1701d0f9
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
87eacd6bf2
|
SAMA5D4: Various changes to get the SAMA4D-EK to build
|
2014-06-06 15:39:40 -06:00 |
|
Gregory Nutt
|
ae01e0819d
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
50893fd36c
|
SAMA5: Cosmetic clean-up of README files
|
2014-06-04 17:02:30 -06:00 |
|
Gregory Nutt
|
70207e05e3
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
495b190e50
|
SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC
|
2014-06-04 12:04:24 -06:00 |
|
Gregory Nutt
|
2dbaed4779
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
f924601fc1
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
8713ee3428
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
2f3fa3cbdc
|
SAMA5 board.h files use type xcpt_t and so must include nuttx/irq.h for type xcpt_t
|
2014-04-17 10:01:15 -06:00 |
|
Gregory Nutt
|
5eb9ee30dd
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
9efb83c5ab
|
Updated README files
|
2014-04-16 16:41:47 -06:00 |
|
Gregory Nutt
|
51950d7850
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
e21212f2b4
|
Undefine IRQPRIO in all configurations it should not be set
|
2014-04-16 08:29:39 -06:00 |
|
Gregory Nutt
|
ab5b37189b
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
f8024cf409
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
Gregory Nutt
|
4ea66ca8e4
|
SAMA5D3x-EK: Updates to README.txt
|
2014-04-12 08:00:37 -06:00 |
|
Gregory Nutt
|
4273436c4b
|
SAMA5D3x-EK: Updates to README.txt
|
2014-04-12 08:00:37 -06:00 |
|
Gregory Nutt
|
cecf3775e2
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
cd6039933e
|
SAMA5: The PIO used for the red LED is also used as the camera module reset line: Added a configuration option to suppress use of the red LED if the PIO is used for another purpose. Reported by David Sidrane.
|
2014-04-11 15:57:35 -06:00 |
|
Gregory Nutt
|
069ea487ae
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
3e085ec0af
|
Long needed clean up of DNS resolver for coding style and naming conventions
|
2014-04-11 12:25:32 -06:00 |
|
Gregory Nutt
|
724ad8d7b5
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
Gregory Nutt
|
ac3865fd89
|
Updated README files and comments
|
2014-04-07 07:43:28 -06:00 |
|
Gregory Nutt
|
26ea8a3d1d
|
updated README
|
2014-04-04 17:13:55 -06:00 |
|
Gregory Nutt
|
b9ae1f3d45
|
updated README
|
2014-04-04 17:13:55 -06:00 |
|
Gregory Nutt
|
c3c5633419
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
bd274dba7f
|
SAMA5: Fix some issues with SDRAM at 528MHz CPU clock
|
2014-04-04 11:37:39 -06:00 |
|
Gregory Nutt
|
22c2ef2abe
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
0b7ec97370
|
SAMA5 boards: Operation at 528Mhz has been verified
|
2014-04-04 10:36:53 -06:00 |
|
Gregory Nutt
|
6500587e35
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
d9e0116075
|
SAMA5 boards: Refresh all configuration files
|
2014-04-04 09:38:39 -06:00 |
|
Gregory Nutt
|
52cfdccd7a
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
eb5a2d670c
|
SAMA5 boards: Add set up for 528MHz CPU clock
|
2014-04-03 17:12:17 -06:00 |
|
Gregory Nutt
|
552b6f44e1
|
SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided.
|
2014-04-03 16:08:18 -06:00 |
|
Gregory Nutt
|
2efc4d6396
|
SAMA5: On some hardware, reconfiguring the PLL while executing out of NOR FLASH causes crashes. This was fixed by David Sidrane by implementing RAM functions. The killer code is copied and executed from ISRAM and the crash is avoided.
|
2014-04-03 16:08:18 -06:00 |
|
Gregory Nutt
|
fa9f3fde29
|
Updated NOR boot logic from David Sidrane
|
2014-04-03 15:40:51 -06:00 |
|
Gregory Nutt
|
89a8bd848c
|
Updated NOR boot logic from David Sidrane
|
2014-04-03 15:40:51 -06:00 |
|
Gregory Nutt
|
61e04eb41d
|
SAMA5 NOR boot: Use a static memory variable to determine if/when we boot to NOR FLASH
|
2014-04-03 15:34:41 -06:00 |
|
Gregory Nutt
|
52f114a10e
|
SAMA5 NOR boot: Use a static memory variable to determine if/when we boot to NOR FLASH
|
2014-04-03 15:34:41 -06:00 |
|
Gregory Nutt
|
3f936c415f
|
SAMA5: Cosmetic updates to comments and README files
|
2014-04-03 15:30:00 -06:00 |
|
Gregory Nutt
|
5fef770362
|
SAMA5: Cosmetic updates to comments and README files
|
2014-04-03 15:30:00 -06:00 |
|
Gregory Nutt
|
a23fc8cc56
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
6201df6463
|
Updated comments and README
|
2014-04-02 09:03:29 -06:00 |
|
Gregory Nutt
|
015c911b8b
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
0d66ba9c00
|
SAMA5 DBGU: Add logic to suppress DBGU reconfiguration when started from a bootloader
|
2014-04-02 09:03:27 -06:00 |
|
Gregory Nutt
|
13295a6a1b
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
b3daf84b12
|
Top level make will now generate a U-Boot uImage file
|
2014-04-01 11:56:58 -06:00 |
|
Gregory Nutt
|
dd094828ec
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
cbdc9155ab
|
SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console
|
2014-04-01 11:24:15 -06:00 |
|
Gregory Nutt
|
eb74d08118
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
3d8cbb415c
|
Cosmetic update to comments and README files
|
2014-03-31 17:25:39 -06:00 |
|
Gregory Nutt
|
cd2c436f96
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
a44a4444e2
|
Cosmetic updates to comments and README files
|
2014-03-31 15:10:15 -06:00 |
|
Gregory Nutt
|
cdcf4f3ad6
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
85b0a1a544
|
Costmetic fixes to README and some comments
|
2014-03-30 11:34:18 -06:00 |
|
Gregory Nutt
|
b0c302ea06
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
fa5988bf7b
|
Add instructions for running NuttX from NAND or TFTP
|
2014-03-30 10:25:44 -06:00 |
|
Gregory Nutt
|
33f57c6df2
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
4410deb8b6
|
SAMA5 Boards: When running from SDRAM, a 32KB offset is needed by the bootloader
|
2014-03-30 10:24:31 -06:00 |
|
Gregory Nutt
|
8068bc46b1
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
Gregory Nutt
|
d14940a375
|
Fix some backward conditional compilation
|
2014-03-30 08:29:21 -06:00 |
|
Gregory Nutt
|
5215080188
|
SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards
|
2014-03-30 07:26:38 -06:00 |
|
Gregory Nutt
|
392031ff7c
|
SAMA5D3x-EK: Change name of all board-specific configuration variables so that there are no collisions with names of similar variables for other boards
|
2014-03-30 07:26:38 -06:00 |
|
Gregory Nutt
|
c433c684fa
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
aac2a6759d
|
SAMA5D23 boards: When running out of SDRAM, need to query the PMC to determine operating frequency
|
2014-03-29 17:51:06 -06:00 |
|
Gregory Nutt
|
0d22850b30
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
8bc70e38ab
|
SAMA5D3 Xplained: Has no NOR flash. Remove all NOR support from board configuration
|
2014-03-29 15:05:09 -06:00 |
|
Gregory Nutt
|
2a3a6bca97
|
configs/sama5d3x-ek: Fix some typos
|
2014-03-28 15:18:49 -06:00 |
|
Gregory Nutt
|
d204310623
|
configs/sama5d3x-ek: Fix some typos
|
2014-03-28 15:18:49 -06:00 |
|
Gregory Nutt
|
0cefef9cb5
|
Documentatin updated; fix errors in some comments
|
2014-03-28 09:52:07 -06:00 |
|
Gregory Nutt
|
f12e37cae4
|
Documentatin updated; fix errors in some comments
|
2014-03-28 09:52:07 -06:00 |
|
Gregory Nutt
|
4d2091bdba
|
SAMA5D3x-EK: Fix lots of typos in board name
|
2014-03-28 09:11:19 -06:00 |
|
Gregory Nutt
|
1e7a14ed2e
|
SAMA5D3x-EK: Fix lots of typos in board name
|
2014-03-28 09:11:19 -06:00 |
|
Gregory Nutt
|
41c8154ea8
|
apps/system/usbmsc: Back out kludge that is no longer needed with the recent fix to the USB MSC class
|
2014-03-25 12:42:01 -06:00 |
|
Gregory Nutt
|
3c3506bd13
|
apps/system/usbmsc: Back out kludge that is no longer needed with the recent fix to the USB MSC class
|
2014-03-25 12:42:01 -06:00 |
|
Gregory Nutt
|
56e8db0166
|
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
|
2014-03-13 14:07:35 -06:00 |
|
Gregory Nutt
|
42e06fb503
|
SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash
|
2014-03-13 14:07:35 -06:00 |
|
Gregory Nutt
|
ca25657f7e
|
Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes
|
2014-03-06 16:02:18 -06:00 |
|
Gregory Nutt
|
bd8a0aec21
|
Refresh several defconfig files to (1) bring them up-to-date, and (2) to confirm that no bugs were introduced in recent massive Kconfig file changes
|
2014-03-06 16:02:18 -06:00 |
|
Gregory Nutt
|
7050b91155
|
Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file
|
2014-03-06 12:23:26 -06:00 |
|
Gregory Nutt
|
596bdc73df
|
Removed the CONFIG_NUTTX_NEWCONFIG setting from every defconfig file
|
2014-03-06 12:23:26 -06:00 |
|
Gregory Nutt
|
160065554a
|
Removed unused configuratin variable: CONFIG_PGTABLE_VADDR
|
2014-03-01 16:21:28 -06:00 |
|
Gregory Nutt
|
8462bcc072
|
Removed unused configuratin variable: CONFIG_PGTABLE_VADDR
|
2014-03-01 16:21:28 -06:00 |
|
Gregory Nutt
|
58eed436e9
|
Removed almost all ostest configurations
|
2014-02-28 19:19:11 -06:00 |
|
Gregory Nutt
|
cbcabe3314
|
Removed almost all ostest configurations
|
2014-02-28 19:19:11 -06:00 |
|
Gregory Nutt
|
de80fe2e04
|
configs/*/defconfig: If CONFIG_NSH_LIBRARY is set, make sure that CONFIG_NSH_READLINE is also set or the configuration will use the CLE the next time it is reconfigured
|
2014-02-28 07:45:51 -06:00 |
|
Gregory Nutt
|
47ca6ef4d4
|
configs/*/defconfig: If CONFIG_NSH_LIBRARY is set, make sure that CONFIG_NSH_READLINE is also set or the configuration will use the CLE the next time it is reconfigured
|
2014-02-28 07:45:51 -06:00 |
|
Gregory Nutt
|
3ca1a665e4
|
SAM4E: USART/USART header files and drivers updated to support the SAM4E
|
2014-02-22 13:46:23 -06:00 |
|
Gregory Nutt
|
2cc96f9be1
|
SAM4E: USART/USART header files and drivers updated to support the SAM4E
|
2014-02-22 13:46:23 -06:00 |
|
Gregory Nutt
|
b73604a455
|
Update README with configuration warning
|
2014-02-04 08:42:42 -06:00 |
|
Gregory Nutt
|
0802c792d9
|
Update README with configuration warning
|
2014-02-04 08:42:42 -06:00 |
|
Gregory Nutt
|
8b3934ded8
|
SAMA5: Oops. Upper case in include does not match lower case of filename.
|
2014-01-30 07:40:10 -06:00 |
|
Gregory Nutt
|
eb99d0ea79
|
SAMA5: Oops. Upper case in include does not match lower case of filename.
|
2014-01-30 07:40:10 -06:00 |
|
Gregory Nutt
|
f084b6b8ef
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
764ba4da70
|
SAMA5: Fix logic for running with data in SDRAM
|
2014-01-29 07:49:23 -06:00 |
|
Gregory Nutt
|
374594ded3
|
SAMA5: Add a missing endif in a Make.defs that recently added; Several other cosmetic changes
|
2014-01-28 18:59:11 -06:00 |
|
Gregory Nutt
|
75d21426ff
|
SAMA5: Add a missing endif in a Make.defs that recently added; Several other cosmetic changes
|
2014-01-28 18:59:11 -06:00 |
|
Gregory Nutt
|
6eee32c91d
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
72ee80b7cc
|
SAMA5: Mostly cosmetic
|
2014-01-28 15:54:03 -06:00 |
|
Gregory Nutt
|
f8134ec5fd
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
6188eb7472
|
SAMA5: More variables-in-SDRAM stuff
|
2014-01-28 15:05:19 -06:00 |
|
Gregory Nutt
|
79ea83d421
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
34b94de8fe
|
Add support for .data and .bss in SDRAM
|
2014-01-28 14:35:03 -06:00 |
|
Gregory Nutt
|
65382b9085
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
9f46dac1e2
|
Add option to indicatet that data is retained in SDRAM
|
2014-01-28 10:42:49 -06:00 |
|
Gregory Nutt
|
a473d8fb21
|
A test of kconfig-fontends 3.12.0
|
2014-01-27 14:25:01 -06:00 |
|
Gregory Nutt
|
03d8a4700e
|
A test of kconfig-fontends 3.12.0
|
2014-01-27 14:25:01 -06:00 |
|
Gregory Nutt
|
42a86a9cba
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
2f837ccd2a
|
rename up_led*() functions to board_led_*()
|
2014-01-24 14:28:49 -06:00 |
|
Gregory Nutt
|
f797601f19
|
Rename up_irqbutton() to board_button_irq()
|
2014-01-24 14:04:07 -06:00 |
|
Gregory Nutt
|
1d5b2d3d3e
|
Rename up_irqbutton() to board_button_irq()
|
2014-01-24 14:04:07 -06:00 |
|
Gregory Nutt
|
f4d84ecd7e
|
Rename up_buttons() to board_buttons()
|
2014-01-24 13:59:24 -06:00 |
|
Gregory Nutt
|
1ac245b9c6
|
Rename up_buttons() to board_buttons()
|
2014-01-24 13:59:24 -06:00 |
|
Gregory Nutt
|
e5bfdcf36c
|
Rename up_buttoninit to board_button_intialize
|
2014-01-24 13:50:23 -06:00 |
|
Gregory Nutt
|
b0c0df84f6
|
Rename up_buttoninit to board_button_intialize
|
2014-01-24 13:50:23 -06:00 |
|
Gregory Nutt
|
efbf03ad76
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
f3f5378acc
|
The optimization level can now be selected as part of the configuration
|
2014-01-24 07:45:35 -06:00 |
|
Gregory Nutt
|
a36da96c3c
|
Add pcDuino patch needed for booting. Update README to explain why
|
2013-12-08 10:56:37 -06:00 |
|
Gregory Nutt
|
0d964c56be
|
NxWM::CTouchscreen: Add CONFIG_NXWM_TOUCHSCREEN_DEVINIT to suppress attempts to initialize the touchscreen from NxWM in the kernel build
|
2013-12-30 12:39:23 -06:00 |
|
Gregory Nutt
|
3323df9a62
|
NxWM: Can now disable the NxConsole window. STM3240G-EVAL knxwm: Disabled the NxConsole for now because there are issues with the kernel build.
|
2013-12-30 10:04:34 -06:00 |
|
Gregory Nutt
|
d487d27b41
|
NxWidgets server initialization must be performed in the kernel when NxWdigets is built in kernel mode
|
2013-12-29 09:46:57 -06:00 |
|
Gregory Nutt
|
5885483831
|
default buildroot path is build_arm, not build_arm_nofpu
|
2013-12-26 10:01:14 -06:00 |
|
Gregory Nutt
|
91052a1029
|
Finishes separation of debug symbols and optimization selections
|
2013-12-20 13:23:42 -06:00 |
|
Gregory Nutt
|
49a7faaaaf
|
Add pcDuino patch needed for booting. Update README to explain why
|
2013-12-08 10:56:37 -06:00 |
|
Gregory Nutt
|
4c3b605c19
|
NxWM::CTouchscreen: Add CONFIG_NXWM_TOUCHSCREEN_DEVINIT to suppress attempts to initialize the touchscreen from NxWM in the kernel build
|
2013-12-30 12:39:23 -06:00 |
|
Gregory Nutt
|
cea31ebf68
|
NxWM: Can now disable the NxConsole window. STM3240G-EVAL knxwm: Disabled the NxConsole for now because there are issues with the kernel build.
|
2013-12-30 10:04:34 -06:00 |
|
Gregory Nutt
|
6eb5386b6f
|
NxWidgets server initialization must be performed in the kernel when NxWdigets is built in kernel mode
|
2013-12-29 09:46:57 -06:00 |
|
Gregory Nutt
|
c8d9de660c
|
default buildroot path is build_arm, not build_arm_nofpu
|
2013-12-26 10:01:14 -06:00 |
|
Gregory Nutt
|
cbf86ac01f
|
Finishes separation of debug symbols and optimization selections
|
2013-12-20 13:23:42 -06:00 |
|
Gregory Nutt
|
492635ced8
|
Kconfigs: Interrupt prioritization should not be automatically selected
|
2013-12-20 08:42:54 -06:00 |
|
Gregory Nutt
|
67b5785d58
|
Kconfigs: Interrupt prioritization should not be automatically selected
|
2013-12-20 08:42:54 -06:00 |
|
Gregory Nutt
|
ccb40177c1
|
A10 PIO register definition header file
|
2013-12-10 15:53:32 -06:00 |
|
Gregory Nutt
|
77cf855260
|
A little more SAMA5/OV2640 logic
|
2013-12-10 11:12:22 -06:00 |
|
Gregory Nutt
|
373d0317fb
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
Gregory Nutt
|
5761d57f5f
|
More OV2640 initialization logic
|
2013-12-10 09:10:39 -06:00 |
|
Gregory Nutt
|
d2914c6811
|
A little SAMA5 camera stuff
|
2013-12-09 14:20:11 -06:00 |
|
Gregory Nutt
|
41b2989549
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
b3216c317a
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
2f8a32a109
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
45f46b4815
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
d5e7644e23
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
994a49f8b8
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
da2a5873bd
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
e7b4658117
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
7711a66347
|
Add drivers/mtd/README.txt
|
2013-12-04 07:46:10 -06:00 |
|
Gregory Nutt
|
ddcc133368
|
SAMA5 NAND: Updated README and configuration logic
|
2013-12-03 14:32:59 -06:00 |
|
Gregory Nutt
|
cafee7bc49
|
Updated README
|
2013-12-03 13:26:09 -06:00 |
|
Gregory Nutt
|
534def7212
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
5a1350b475
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
46287d55d0
|
SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README
|
2013-12-02 17:22:55 -06:00 |
|
Gregory Nutt
|
1b016dde80
|
NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered
|
2013-12-01 20:17:09 -06:00 |
|
Gregory Nutt
|
4418c9664d
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
9ef6e0ce17
|
Costmet updates, naming, debug output, README file
|
2013-12-01 07:39:20 -06:00 |
|
Gregory Nutt
|
0a11d8767f
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
91517ead98
|
Changes for ZDS-II ez80 build
|
2013-11-28 17:47:03 -06:00 |
|
Gregory Nutt
|
b55565ae50
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
10f097ed1e
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
b7a3597f87
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
06f08899dc
|
A10 PIO register definition header file
|
2013-12-10 15:53:32 -06:00 |
|
Gregory Nutt
|
b7abc8c0fe
|
A little more SAMA5/OV2640 logic
|
2013-12-10 11:12:22 -06:00 |
|
Gregory Nutt
|
e282aad903
|
Move include/nuttx/fb.h to include/nuttx/video/fb.h
|
2013-12-10 09:23:54 -06:00 |
|
Gregory Nutt
|
bdfb2f7eb6
|
More OV2640 initialization logic
|
2013-12-10 09:10:39 -06:00 |
|
Gregory Nutt
|
59d5c8151d
|
A little SAMA5 camera stuff
|
2013-12-09 14:20:11 -06:00 |
|
Gregory Nutt
|
4d07c15932
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
ae044a485c
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
22fefb59da
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
7b6b2bbd7c
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
08e027b42f
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
692b087d07
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
422b225401
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
ae01f868b2
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
68ccbc0855
|
Add drivers/mtd/README.txt
|
2013-12-04 07:46:10 -06:00 |
|
Gregory Nutt
|
80841d135d
|
SAMA5 NAND: Updated README and configuration logic
|
2013-12-03 14:32:59 -06:00 |
|
Gregory Nutt
|
e90d6cf262
|
Updated README
|
2013-12-03 13:26:09 -06:00 |
|
Gregory Nutt
|
2318531d93
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
875b49913a
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
0d8ac38e59
|
SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README
|
2013-12-02 17:22:55 -06:00 |
|
Gregory Nutt
|
5b9d07e5c0
|
NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered
|
2013-12-01 20:17:09 -06:00 |
|
Gregory Nutt
|
5f76fe9cb4
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
c777f90b8a
|
Costmet updates, naming, debug output, README file
|
2013-12-01 07:39:20 -06:00 |
|
Gregory Nutt
|
25f7e45708
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
78936f7260
|
Changes for ZDS-II ez80 build
|
2013-11-28 17:47:03 -06:00 |
|
Gregory Nutt
|
5fb0062d2d
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
ac275259bd
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
45a4eba015
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
3a26c6cc81
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
7ccbbe07cb
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
8563b45558
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
c7657c9c5e
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|