Otherwise we will try to dump the state of the current task, however the
exit handler has already started doing some cleanup and invalidated its
group. Accessing the group from dumponexit will crash.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
"error: incompatible types when assigning to type 'struct filelist *' from type 'struct filelist'
filelist = tcb->group->tg_filelist;"
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
If source register of sw instruction is x0, we must point it to a constant zero
since in NuttX's context,
value of index 0 is EPC.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Hartid and cpuindex are not the same thing. Hartid is needed regardless
of SMP, for external interrupt handling etc.
SMP needs cpuindex which might not be index == hartid, so both are
needed. IMO it is clearer to provide separate API for both.
Currently the implementation of up_cpu_index is done a bit lazily,
because it assumes hartid == cpu index, but this is not 100% accurate,
so it is still missing some logic.
chip/c906_timerisr.c: In function 'up_timer_initialize':
Error: chip/c906_timerisr.c:71:3: error: implicit declaration of function 'DEBUGASSERT' [-Werror=implicit-function-declaration]
DEBUGASSERT(lower);
^~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: chao.an <anchao@xiaomi.com>
riscv_mhartid is no longer called by exception_common, so can remove
this file from platforms that don't need it.
Also fixes make warning:
Makefile:123: target 'riscv_cpuindex.o' given more than once in the same rule
IRQ_NSTACKS, ARCH_CPU_COUNT, CONFIG_SMP_NCPUS all relate to each
other. However, a bit of clean up can be done and everything can
be merged into SMP_NCPUS.
The MPFS bootloader case works also as it requires only 1 IRQ stack
for the hart that executes as bootloader.
Some risc-v based chips don't support unaligned data access,
it will trigger a exception and then lead to crash.
In this patch, we handle the misaligned access by software to make
system run continue.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
ESP32C3 use customized irq encoding so it's hard to share further code
with other risc-v based chips, in this patch, we keep the exception
number definition with risc-v spec.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
- Access to PLIC via S-mode registers
- Access to IRQs via S-mode registers / definitions
- Initialize S-mode registers upon boot
- Initialize per CPU area before nx_start
NOTE: S-mode requires a companion SW (SBI) which is not yet implemented,
thus S-mode is not usable as is, yet.
Remove riscv_fault since its code is duplicated with riscv_exception,
and there are textual excpetion reason in riscv_exception.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
It might be useful to store things in memory per CPU. The tricky part
is that all CPUs run the same code and see the same memory, so some
kind of centralized access is required.
For now, the structure contains the hart id.
Access to the structure elements is provided via sscratch, which is
unique for every hart!
- Add config "ARCH_USE_S_MODE" which controls whether the kernel
runs in M-mode or S-mode
- Add more MSTATUS and most of the SSTATUS register definitions
- Add more MIP flags for interrupt delegation
- Add handling of interrupts from S-mode
- Add handling of FPU from S-mode
- Add new context handling functions that are not dependent on the trap
handlers / ecall
NOTE: S-mode requires a companion SW (SBI) which is not yet implemented,
thus S-mode is not usable as is, yet.
When process a is switched to process b, the address environment is
swapped with a call to group_addrenv(). The stack upon entry will be
a's, and upon exit b's. This will fail, so a neutral stack is required,
either a kernel stack or an IRQ stack.
Infrastructure for an IRQ stack is already in place, so give a hint
that an interrupt stack should be provided if address environments
are enabled.
## Summary
`bl602_spi_cmddata()` implements SPI Cmd/Data `SPI_CMDDATA()` for only 3 LCD drivers: ST7735, ST7789 and GC9A01.
This patch removes the check for LCD drivers, so that SPI Cmd/Data will work for all LCD drivers.
More details: https://github.com/apache/incubator-nuttx/pull/5898
## Impact
This change impacts LCD drivers that call `SPI_CMDDATA()`.
Previously `SPI_CMDDATA()` would fail with `ENODEV` for LCD drivers other than ST7735, ST7789 and GC9A01.
After patching, `SPI_CMDDATA()` will work correctly with all LCD drivers.
## Testing
We tested with LVGL and ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-30)
## Summary
To control the Data/Command Pin on ST7789 SPI Display, the SPI Driver flips the MISO Pin as though it was a GPIO.
To implement this on BL602, we reconfigure MISO from SPI Pin to GPIO Pin on the fly inside `bl602_spi_cmddata()`.
When the SPI Port is deselected (after the SPI operation), we revert MISO back from GPIO Pin to SPI Pin. We implement this inside `bl602_spi_select()`.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
## Impact
This change impacts 3 LCD drivers that call `SPI_CMDDATA()`: ST7735, ST7789, GC9A01.
Previously the BL602 SPI Driver would fail with "SPI cmddata not supported" when the above drivers are used.
After the change, the above drivers will set the LCD Data/Command Pin correctly.
## Testing
We tested this implementation of SPI Cmd/Data with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#spi-cmddata)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-29)
## Summary
SPI Poll Send `bl602_spi_poll_send()` doesn't send any SPI Data because it doesn't enable SPI Master and it doesn't clear the SPI FIFO. Also it hangs because it loops forever waiting for the FIFO.
We fix this problem by moving the code that enables SPI Master and clears the FIFO, from SPI Poll Exchange `bl602_spi_poll_exchange()` to SPI Poll Send. (Note that SPI Poll Exchange calls SPI Poll Send)
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Impact
This problem affects all NuttX Drivers that call `SPI_SEND()` on BL602, including the ST7789 Display Driver.
Previously `SPI_SEND()` didn't send any SPI Data and never returns, because it loops forever waiting to receive data.
Now `SPI_SEND()` sends data and returns correctly.
[More Details Here](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
## Testing
We tested the modified SPI Poll Send with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602:
- [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#fix-spi-send)
We also tested LVGL with ST7789 on PineCone BL602:
- [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo)
As for the modified SPI Poll Exchange, we tested with Semtech SX1262 SPI Transceiver on PineCone BL602:
- [Testing SPI Poll Exchange](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-25)
The xxx_netinitialize is defined to a function only if
CONFIG_NET=y and CONFIG_NETDEV_LATEINIT=n. Otherwise it
is defined to an empty macro.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
USB EP0 reads data from the fifo but doesn't mark the read
done which adds significant delays. Fix this unnecessary
slowdown due to operation timeouts by finishing the read
properly.
Also add a missing function description to the function
mpfs_ep_set_fifo_size().
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Move the target specific memory map to a separate file so there is no
need to copy&paste the __xxram_start etc linker symbols to each file
that needs them.
Also add MMU flags for I/O and kernel areas, they will be needed
when the kernel runs with virtual addresses also.
Some fields of mstatus were marked as Reserved Writes Preserve Values, Reads Ignore Values (WPRI),
so we must keep its origin value with addition flags.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
In smp system riscv_cpu_boot run in idle task so there is a overlap with the origin coloration range and in used stack.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Fix EP0 stall and resume properly. EP0 wasn't clearly addressed
on stall / resume operations.
Also fix data reads that provide garbage for the first request.
It has always random data as it's completed prior to any read
operation.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Mux USB IO pins one-by-one using package specific pinmux definitions. This avoids accidentally overwriting IO settings for other pins.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
include theis commit:
commit 6ad8917b7e27e5e80fb9268492b9111b17ed2024
Author: Petro Karashchenko <petro.karashchenko@gmail.com>
Date: Fri Jan 28 09:13:23 2022 +0200
lib: fix compilation when strings.h is included
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
and fix this warning:
Error: include/sbi/sbi_bitops.h:47:19: declaration of 'ffs' shadows a built-in function
static inline int ffs(int x)
^~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
PR#5688 review fixes are in this patch. The PR was already
merged so the fixes are addresses here as a separate patch.
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds a simple USB device driver for the mpfs. However,
this driver is still at its early phase. Only limited testing
with CDC/ACM has been conducted.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This commit fixes an issue where some peripheral clocks are being
disabled during CPU reset on ESP32-C3.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
They are not really defined and used in any where:
uint32_t up_getmisa(void);
uint32_t up_getarchid(void);
uint32_t up_getimpid(void);
uint32_t up_getvendorid(void);
uint32_t up_gethartid(void);
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
here is the reason:
1.clock_systime_timespec(core function) always exist regardless the setting
2.CLOCK_MONOTONIC is a foundamental clock type required by many places
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
## Summary
A lot of linker scripts were listed twice, once for unix, once for windows.
This PR cleans up the logic so they're only listed once.
## Impact
Any opportunity to use a single source of truth and reduce lines of code is a win!
## Testing
CI will test all build
Fix the CPU1 idle tasks stack corruption since the cpux's idle stack
is loaded from g_cpu_basestack (data section) before, but on this time
it maybe not ready since it is initialized by CPU0, and the value
from g_cpu_basestack is random.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
