The maximum number of samples which can be handled without overrun depends on various factors.
This is the user's responsibility to correctly select this value.
Since the interfece to update the sampling time is available for all supported devices,
the user can change the default vaules in the board initialization logic and avoid ADC overrun.
This fixes the problem that an assertion in sim build aborted NuttX
even when the assertion was generated from userspace (in which case
simpy the task needs to exit). This required moving the relevant code
into the sim blob.
tcpip ok
update wifi demo configuration
fix tcpip input cause misalign fault
change some api definetions in nuttx
fix wifi manager strlen copy without suffix null character
fix 602 network buf allocation issue
wifi scan works
[ble] Add controller code
[BLE] Add nuttx adapt code for blecontroller .
[BLE] modified include file path, to fix cflag is too long.
[ble]Test ble peripheral pass, save code.
[ble] Organize the code
[BLE] Add blecontroller config for nuttx
[BLE] Add config for ble example
fix tcp lost packet when rx
support wpa3.
Copy default config from wifi default config. Create ble for local test and ble tester for autopts.
Add config for local test.
Add pts teset config for host test
Add config for mesh test
Create task to init blecontroller
Delete blecontroller rx thread.
using idle task to receive hci command from host
Set ble device name to /dev/ble, and fix code.
1.fix a ke schedule risk 2. CFG_HOST is enabled only in the case that CONFIG_BLE_HOST_DISABLE is not enabled, by lanlan
rm _sp_main stack.
change h/l workq_stack_size 6K
change l workq_stack_size 3K.
[ble] delete file_detach
color idle stack.
clear bl602 netdev code
SCAN is sorted according to RSSI
enlarge nsh command line buffer
fixup stack overflow check checkfail when startup
arch/risc-v/BL602:fix reboot cause crash
reboot default use romapi.
riscv/bl602:netdev support defered input, remove wifi_tx function
risc-v/bl602:fix sem_timedwait usage error in bl_cmds
risc-v/bl602:fix memory access out of bounds when copy ssid
remove ble and wifi source, download when build
add bl602 blob gitignore
risc-v/bl602:remove ble-pts defconfig
Fix some typos in NuttX style naming
Fix the replacement of tab to space
fix wlan interface down still receive packet
fix wapi crash, rx when ifdown,and ble_hci_rx_do
change system reset to rom dirver
change ble hci interval to 50ms
NuttX support wifi enable/disable log via KConfig
support country code configuration in Kconfig
fix ap tx not work
arch/arm/src/stm32h7/stm32_dma.c:
* Include <inttypes.h> explicitly for format specifiers.
* In functions stm32_mdma_capable(), stm32_mdma_dump(),
stm32_sdma_setup(), stm32_sdma_capable(), stm32_sdma_dump(),
stm32_bdma_setup(), stm32_bdma_capable(), stm32_bdma_dump(),
stm32_dmamux_dump(), stm32_dmachannel(), stm32_dmafree(), and
stm32_dmadump():
Where appropriate, use format specifiers from <inttypes.h> in
calls to dmainfo(). This removes numerous compiler warnings
like:
warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t {aka long unsigned int}'
[-Wformat=]
* In function stm32_mdma_disable():
Remove wrong redefinition of 'dmachan' parameter as a local
variable. This fixes the following compiler error that occurs
when building with CONFIG_STM32H7_MDMA:
chip/stm32_dma.c:930:17: error: 'dmachan' redeclared as
different kind of symbol
DMA_CHANNEL dmachan = (DMA_CHANNEL)handle;
^~~~~~~
chip/stm32_dma.c:928:44: note: previous definition of 'dmachan'
was here
static void stm32_mdma_disable(DMA_CHANNEL dmachan)
^~~~~~~
chip/stm32_dma.c:930:43: error: 'handle' undeclared (first use
in this function); did you mean 'random'?
DMA_CHANNEL dmachan = (DMA_CHANNEL)handle;
^~~~~~
random
For example Windows RNDIS driver issues SETUP requests that are 76 bytes
long. Previously NuttX would read them all, but only if they arrive at
the same time. If host transfer scheduling causes a pause between the
two DATA packets, stm32_ep0out_receive() would proceed with an incomplete
transfer. The rest of the data could either be skipped by the error handler
branch, or be left in NAK state forever, stopping any further communication
on the endpoint.
This commit changes it so that the whole transfer has to be received before
SETUP handler is called. Depending on CONFIG_USBDEV_SETUP_MAXDATASIZE any
excess bytes will be discarded, but doing this in a controlled way ensures
deterministic behavior. In the specific case of RNDIS, the trailing bytes
are unused padding bytes and can be safely discarded.
Summary:
- In the previous implementation, signal handling for SMP was done
in a critical section that is not correct
- This commit fixes this issue
Impact:
- signal handling for SMP
Testing:
- Tested with ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
arch/arm/src/stm32/Kconfig:
* configs ARCH_CHIP_STM32G431K, ARCH_CHIP_STM32G431C,
ARCH_CHIP_STM32G431R, ARCH_CHIP_STM32G431M, and
ARCH_CHIP_STM32G431V: Fix copy/paste of incorrect
names shown in the Kconfig menu.
nxstyle is complaining that the headers are defines outside
Included Files section and we have to duplicate the definitions
to the imported files to avoid build errors.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Alan Carvalho de Assis has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
David Sidrane has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
David S. Alessio has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Previously SPI interrupts were enabled on DMA initialization. But since
the addition of SPI Mixed mode it created a side-effect, breaking
polling transfers. So now interrupts are enabled before the DMA
transactions and disabled once they are finished.
Furthermore, the transaction done flag is also cleared before a new
transaction starts.
Commit 6382b2ba introduced the possibility of using SPI in Mixed mode,
i.e. performing SPI transfers via both polling and interrupts. However,
setbits was only applying the configuration if DMA was not enabled.
Since the original stm32l4 version of this code already has an ASF
license header do that for stm32l5, too.
Apply latest changes to stm32l4_spi.c to stm32l5_spi.c as well.
Update stm32l5/Kconfig to allow selection of SPI1/2/3.
Signed-off-by: Michael Jung <mijung@gmx.net>
The LSE crystal oscillator driving strength can only be decreased to the
lower drive capability (LSEDRV = 00b) once the LSE is running, but not
to any other drive capability. Instead of letting the user select a
value between 0 and 3 and then failing the build if the selected value
was not 0, make it a boolean option.
Signed-off-by: Michael Jung <mijung@gmx.net>
Ported from stm32f7/h7: If configured this way, ramp-up the LSE crystal
oscillator driving strength until the LSE starts up.
Signed-off-by: Michael Jung <mijung@gmx.net>
Because a thread of gnss receiver is created by pthread in the
AppBringUp task, the thread would be killed when AppBringUp
task exits.
Change to use kthread_create instead of pthread_create to prevent
this issue.
cxd56_gnss.c uses file descriptor operation from next change.
0536953 Kernel module should prefer functions with nx/kmm prefix
But this change need to add fcntl.h in include header.
So, add missing header.
As proposed by David Sidrane. Required drive strength is board specific
and should be defined in the respective board.h file.
Signed-off-by: Michael Jung <mijung@gmx.net>
Architecture support for STMicroelectronics STM32L552xx and STM32L562xx
MCUs. This is based on corresponding code for STM32L4, but has been
considerably adjusted. Tested with Nucleo-L552ZE-Q and STM32L562E-DK
boards with simple NSH configurations.
Signed-off-by: Michael Jung <mijung@gmx.net>
is enabled.
That region is technically part of the PRO CPU and we should be able to
allocate it early. However, QEMU uses a slightly different bootloader
image that uses the same part for both CPU. So, when APP CPU starts
during the SMP bring up it will corrupt some data.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
In case CONFIG_MM_REGIONS doesn't include all the available memory
regions the user will have a warning to increase it.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Internal heap was occupying the region straight after .data up to
HEAP_REGION1. The issue with this is if static allocation is large,
we'll end up with too little memory left for the internal heap.
Moving it to the beginning of region 2 gives us more room to play with.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Alan Carvalho de Assis has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
Summary:
- This commit fixes an error message in imx_enet.c
Impact:
- None
Testing:
- Build only
Suggested-by: David Sidrane <David.Sidrane@NscDg.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit adds CPU activity LED feature to cxd56_idle.c and cx56_irq.c
- An LED for the current CPU will turn off before calling WFI
- An LED for the current CPU will turn on when an interrupt happens
Impact:
- CONFIG_ARCH_LEDS_CPU_ACTIVITY=y only
Testing:
- defconfigs will be commited later.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The original commit was added to avoid hardfault but the
root cause was the stack corruption which has been fixed by
the previous commit. So let me revert the original commit.
Impact:
- SMP only
Testing:
- spresense:rndis_smp with nxplayer + telnet
This reverts commit 197187d826.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes hardfault when running nxplayer with rndis_smp
Impact:
- SMP only
Testing:
- Tested with rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
In scenarios where there is suspicion that someone might be touching your data when you don't expect, you can setup a watchpoint, and then guard accesses that you know are valid. If the debugger halts due to the watchpoint, you'll see where the unexpected access is coming from.
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.
Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
since sometime platform code need do some special action during memcpy
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id108ef4232376feab3e37e9b3aee9a7927a03bd4
Bug description:
CONFIG_SMP=y
Suppose we have 2 cores in SMP, here is the ps return:
PID GROUP CPU PRI POLICY TYPE NPX STATE STACK USED FILLED COMMAND
0 0 0 0 FIFO Kthread N-- Assigned 004076 000748 18.3% CPU0 IDLE
1 0 1 0 FIFO Kthread N-- Running 004096 000540 13.1% CPU1 IDLE
nsh> kill -4 0
or:
nsh> kill -4 1
system blocked.
Reason:
In func xx_sigdeliver() restore stage, when saved_irqcount == 0, that means
rtcb NOT in critical_section before switch to xx_sigdeliver(), then we need
reset the critical_section state before swith back.
Fix:
Add condition to cover saved_irqcount == 0.
Change-Id: I4af7f95e47f6d78a4094c3757d39b01ac9d533b3
Signed-off-by: ligd <liguiding1@xiaomi.com>
This Knob will cycle through the values from
low to high. To avoid damaging the crystal.
We want to use the lowest setting that gets
the OSC running. See app note AN2867
This Knob will cycle through the correct*
values from low to high. To avoid damaging
the crystal. We want to use the lowest setting
that gets the OSC running. See app note AN2867
*It will take into account the rev of the silicon
and use the correct code points to achive the drive
strength. See Eratta ES0392 Rev 7 2.2.14 LSE oscillator
driving capability selection bits are swapped.
With TrustZone support in armv8-m the bit-fields in EXC_RETURN have been
extended. Bit 6 ('S') now specifies whether the interrupted program was
running in the Non-Secure (S=0) or Secure (S=1) security state.
Furthermore, Bit 0 ('ES' - Exception Secure) specifies the
security state athe exception is taken to (0: Non-Secure, 1: Secure).
When NuttX is run together with TrustedFirmware-M as the application in
the non-secure world both the S and the ES bits have to be set to '0'.
For armv8-m those are also the correct values if TrustZone is not
implemented on the respective MCU or if it is disabled.
Signed-off-by: Michael Jung <mijung@gmx.net>
This seems to fix esp32_readdata_encrypted() with spiram "buffer".
Note: I'm not sure if this is the right fix or not.
I couldn't find any documentation about Cache_Flush.
Summary:
- This commit applies armv7-m signal handling logic
Impact:
- armv6-m signal handling
Testing:
- Tested with ostest with the following configs
- raspberrypi-pico:nsh, raspberrypi-pico:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
IRQs cannot be individually disabled on the eZ80, so using
`up_disable_irq()` had no effect. This left the IRQ handler being
constantly triggered without the lower half handler running.
The macro for EMAC stats was incompatible with Clang. The simplified
form gives identical results under ZDS-II.
The MII clock speed must be set before trying to read MII registers.
It's now done before resetting the PHY using the Mode Control Register.
MII initialization waited on the auto-neogotiate restart bit being set
but PHY hardware is frequently fast enough to have cleared the bit
before the first read of it. It now instead just waits on auto-negotiate
completing. The MII poll loop now uses `up_mdelay` because it was far
too fast at 50MHz using a busy loop, giving time for a link to be
established.
Bad packets are now processed enough to release their buffers back to
the EMAC hardware.
A few typos, unused variables, and other miscellaneous issues were also
fixed.
Summary:
- This commit adds 'select ARM_HAVE_WFE_SEV' to ARCH_CHIP_RP2040
- Now NuttX spinlock uses WFE/SEV to reduce power consumption
- Also, modify a comment on rp2040
Impact:
- rp2040 only
Testing:
- Tested with raspberrypi-pico:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
You can find them used in the ROM version of memcpy.
While it might be controversial if it's a good idea to use the ROM version
of these functions, it's nicer to support more instructions here anyway.
Summary:
- In the previous implementation, the build system stops if
PICO_SDK_PATH is not set.
- However, this behavior is not good for CI. Because the path
is only used to generate a flash image.
- This commit fixes this issue
Impact:
- rp2040 only
Testing:
- Tested with and without PICO_SDK_PATH
The GPIO example was also extended to include testing an interrupt pin.
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
This commits adds support for the ESP32-C3 IO Mux and GPIO Matrix. It
also includes necessary board logic to run the GPIO example with 2
outputs.
Co-authored-by: Alan Carvalho <alan.carvalho@espressif.com>
Co-authored-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This change reflects that the geometry isn't related to the largest
allocatable unit on the platform.
Calls to read and write block devices are also affected and have
been updated.
Check if all messages were transferred, if not, return -ENXIO.
This is particularly useful when the slave returns an unexpected NAK,
the application code should catch the error to avoid failing silently.
Summary:
- This commit fixes a compile warning if CONFIG_ARCH_INTERRUPTSTACK is set
Impact:
- None
Testing:
- Built with esp32-devkitc:smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Recently I noticed that ESP32-DevKitC-32D suddenly stops
during receiving ping packets from PC after 10-20mins
- Actually, sometimes memory leak happened when some device
sent a big broadcast packet periodically on the network
- This commit fixes this issue by calling esp_wifi_free_eb()
in the case that the packet exceeds WLAN_BUF_SIZE.
- Also, this commit applies the same logic in the case that
the Wi-Fi interface is down
Impact:
- None
Testing:
- Tested with esp32-devkitc:wapi
Suggested-by: YAMAMOTO Takashi <yamamoto@midokura.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces driver-specific spinlock in cxd56_serial.c
to improve performance
Impact:
- SMP only
Testing:
- Tested with spresense:wifi and spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes style warnings under max32660
- Also fix compile errors in max32660_gpio.c with CONFIG_DEBUG_GPIO_INFO=y
Impact:
- None
Testing:
- Built with max32660-evsys:nsh
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- In the previous imxrt_enet.c, imxrt_enet.c assumed that
CONFIG_NET_ETH_PKTSIZE includes the ethernet CRC (4bytes)
- However, most of the driver implementation explicitly
add CONFIG_NET_GUARDSIZE for the CRC to the internal buffer
- This commit conforms to such rules
Imapct:
- No impact
Testing:
- Tested with iperf with imxrt1060-evk
- NOTE: need to add the following configs
+CONFIG_EXAMPLES_IPERF=y
+CONFIG_EXAMPLES_IPERFTEST_DEVNAME="eth0"
+CONFIG_IOB_NBUFFERS=128
+CONFIG_NET_ETH_PKTSIZE=1514
+CONFIG_NET_GUARDSIZE=4
+CONFIG_RR_INTERVAL=200
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Port C was not working because the GPIO pin count was
wrong. The 48 pin packages has 34 GPIO (Not counting PH0 & PH1)
It is GPIOA GPIO B (sans PB11) and GPIOC PC13-PC15
The calls via RTC API weren't fast enough for the edge case
of minimum counter value, resulting in the timer never
expiring as the counter had already passed the compare value.
This now uses direct register access functions and also
gets the latest counter value in edge case.
This function is already declared in include/nuttx/init.h include this
file instead.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Don't declare riscv_addregion if CONFIG_MM_REGIONS is < 1, so we won't
have to provide a dummy stub for every chip.
Also rename the function from up_addregion to riscv_addregion since it's
not exported outside the arch directory.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
The MCAN driver private structure has been renamed to struct sam_mcan_s,
but some functions reference sam_can_s. There are missing defines
of return variable in some functions.
Signed-off-by: Pavel Pisa <ppisa@pikron.com>
Summary:
- This commit fixes a compile error in imx_enet.c
with CONFIG_DEBUG_ASSERTIONS=y
Impact:
- None
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes imx_enet.c if CONFIG_IMX_ENET_NTXBUFFERS=1
- Also adds some ninfo() debug messages
Impact:
- imx_enet.c only
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Since imx_enet.c is based on imxrt_enet.c and still under debugging,
the differences should be minimum to keep tracking the changes
Impact:
- None
Testing:
- Tested with sabre-6quad:netnsh with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The static memory is now divided at almost the middle to not override
the ROM data. The old 0x28000 will take all of what's left for heap
region1.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Summary:
- This commit fixes compile errors in esp32_spiflash.c and
esp32_wifi_adapter.c with CONFIG_SMP=y
Impact:
- SMP only
Testing:
- Tested with esp32-devkitc:wapi
- NOTE: the following configs need to be added.
+CONFIG_SMP=y
+CONFIG_SMP_IDLETHREAD_STACKSIZE=3072
+CONFIG_SMP_NCPUS=2
+CONFIG_SPINLOCK_IRQ=y
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The stm32f412 was not a clean port. This is one step to fix
it. The shortcuts taken has caused more wasted hours finding
bad pin mappings then doing the job correctlry to begin with.
stm32:Kconfig Add CAN2 on STM32F412
SMP was broken because the ROM memory wasn't set correctly. Some
regions were shared with the ROM code.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Requiring the size to be a multiple of 3 is a very strange restriction.
It doesn't even work with the default value of SPI_SLAVE_BUFSIZE.
I guess it was a typo.
The original assertion was wrong because:
* cpuint numbers for edge interrupts are not dense
(while ESP32_CPUINT_NEDGEPERIPHS is 4, EPS32_CPUINT_EDGESET is not 0xf.)
* This function is used for level interrupts too
This bug made certain values of DRIVE setting
to be wrongly applied (which can be dangerous
under certain situations since for example H0D1
was mapped to H0H1).
1. when sending a message in a group fails, exit immediately
2. when catch I2C error interrupt, close interrupt
3. clear clock configuration when deinit I2C
4. free I2C interrupt when deinit I2C
add support to attach the devices via HCI TTY to Bluetooth Host
Reference:
drivers/wireless/bluetooth/bt_uart_shim.c
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- This commit fixes DEBUGASSERT in lm3s_ethernet.c
Impact:
- lm3s_ethernet.c only
Testing:
- Tested with lm3s6965-ek:discover with QEMU
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit fixes a compile warning in cxd56_sdhci.c
Impact:
- None
Testing:
- Built with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
