2.fix some files to fix compile warning
3.remove blueteeth header files, which are not used in nuttx core.
4.fix configs and add lost files
5.update defconfig, remove useless items
6.fix compile warning for nuttx phyplus
7.delete useless: ble, h4, zblue defconfig files form phyplus configure folder
8.fix file format check error on phyplus source code
9.fix phyplus kconfig param error
10.update configure file for nuttx
The Atmel samv7 implements progmem functionality. However, there is
missing ARCH_HAVE_PROGMEM Kconfig symbol. This add missing symbol.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds DMA and TC support to SAMV7 AFEC driver. The AFEC (ADC)
can now be triggered by Timer/counter at chosen frewuency and samples can
be transfered via DMA with configurable number of samples. Timer/counter
trigger is now set as a default option with the possibility to change it
to software generated trigger.
DMA is inspired by SAMA5 driver and also uses ping pong buffers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Just a minor change fixing some compile warnings and errros, does not have
any impact on functionality.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
we have many different hostfs implementation now, so it's better
to select the implementation explicitly, just like what we have
done for arm(FS_HOSTFS vs. ARM_SEMIHOSTING_HOSTFS).
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The FAT was not coherent. Resulting in a write failed
with errno:28 No space left on device.
It is unclear how the memory is acesses prior to the DMA
completion. But this restructuring ensures the data
is coherent.
This issue was not detected on the stm32h7
- Add defconfig and board specific files
- Create mpfs/common for code which is shared between MPFS boards.
- Add support for GPIO driven EMMCSD mux.
- Move DDR Libero definitions from arch to boards.
Signed-off-by: Jani Paalijarvi <jani.paalijarvi@unikie.com>
When waiting for a response to a sent command, the command
complete bit (MPFS_EMMCSD_SRS12_CC) should always guarantee
the completion of that particular command. There's no need
to have some combinations skipping the check of the command
complete bit. Thus, remove the 'waitbits' parameter as it's
unnecessary.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
Uros Platise has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
script.
These functions are strongly declared and thus will be used instead of
any other implementation. Furthermore, necessary Kconfig options are
selected to avoid building those function from NuttX's C library.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Currently configuring the uart3/4 as the serial console
doesn't work. Apply proper changes in mpfs_config.h that
enables the following configuration options:
- CONFIG_UART3_SERIAL_CONSOLE
- CONFIG_UART4_SERIAL_CONSOLE
Also, fix a typo in mpfs_lowputc.c that gives a compile
error if defined.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
When enable DEBUG_TCBINFO config, a global struct will
provide, then debuggers can aware nuttx task infomation.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
This commit adds microcontroller support for Analog Front End driver to
samv7 MCUs. Only software trigger via IOCTL is currently supported,
averaging can be set by configuration option CONFIG_SAMV7_AFECn_RES.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
cppcheck reports the following:
arch/risc-v/src/mpfs/mpfs_emmcsd.c:2375:22: error: Uninitialized variable: waitbits [uninitvar]
while (!(status & (waitbits | MPFS_EMMCSD_SRS12_EINT))
The finding is positive and this patch initializes it to
zero properly.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Strongly-Ordered requires aligned access unless
caching is enabled.
Normal memory
Accesses to normal memory region are idempotent...
- unaligned accesses can be supported
With CONFIG_ARMV7M_DCACHE the cache maintenance operation
are not present. Or if CONFIG_ARMV7M_DCACHE_WRITETHROUGH
is on then buffering operations are no-ops.
This change enables MPU_RASR_C and MPU_RASR_B if
CONFIG_ARMV7M_DCACHE is only set.
if CONFIG_ARMV7M_DCACHE_WRITETHROUGH is set then only
MPU_RASR_C is enabled.
N.B When caching is disalbed unaligned access may cause hard faults
so add -mno-unaligned-access
It is always safe to enable Buffering in FLASH to achive unaligned
access leniency, as it is not written to.
1. Wi-Fi and BLE use common PHY functions.
2. Fix Wi-Fi & BLE coexist adapter error.
3. Update esp-wireless-drivers-3rdparty, provide coexist protection for connection.
1. Fix the issue that Wi-Fi can't connect to some special routers occasionally.
2. Support Wi-Fi 12/13 channel active scanning by default.
3. Update Wi-Fi driver code to fix issue of failure to send pkt.
4. Replace software random with hardware random
5. Fix Wi-Fi mode start error
E51 may configure the L1 and L2 caches. Once configured,
no reconfiguration is possible after hardware reset is
issued.
L2 is 16-way set associative with write-back policy. The
size 2 MB, from which 1 MB is utilized with the values
provided here. That's a total of 8 ways. The rest of the
L2 is left out for the bootloader usage.
mpfs_enable_cache() first checks the bootloader usage
doesn't overlap with the cache itself, thus providing a
set of functional values.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
the SDIO clock is not enabled when the bus goes to the idle state, that, in turn, breaks
IRQ delivering mechanism over DAT[1]/IRQ SDIO line to the host.
This reverts commit d9a5b92c1a306a70df52d50a02a80dc8ef20bf0d.
Revert "arch/arm: Remove -march and -mtune"
This reverts commit b8e99cf12f3a287311a2d341f285c71a5da3e4d4.
Bluetooth is not enabled. When Bluetooth is enbaled then it defaults to
64KB. This will not wast those 64KB of memory when Bluetooth is not enabled.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This commit adds new files that support functionality of QSPI driver in
SPI Master Mode. This functionality is included in new files sam_qspi_spi.x
to avoid too much mess in the source code. QSPI in SPI mode can be turn
on by config option SAMV7_QSPI_SPI_MODE.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
When NuttX is booted from a foreign (non NuttX)
bootloader. There as a possibility that the
bootloader configured the MPU, in an
incompatible way for the NuttX memory usage.
The option to reset the MPU before it is initialized
may not succeed if the bss and data initialization
code violated the previous MPU configurations.
Added herein are ARM_MPU_RESET and
ARM_MPU_EARLY_RESET. The former can be used
If the system is capable of booting and running
NuttX MPU configuration code without an MPU
violation. The latter is used if the system can
not run the bss and data initialization code.
These are options so that a NuttX may be configured to
not clobber a bootloader MPU configuration in a system
that is architected to share the MPU configuration task.
So far the SD-card functionality has been tested with
the driver. Now, also the internal eMMC has been tested
working with this patch. This patch applies IOMUX and
clock settings that have been tested working with the
internal eMMC in the Polarfire Icicle kit.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds the proper flag for introducing the DDR
support. Also call the mpfs_ddr_init() at the
proper location.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
This adds DDR training. The training has a small chance of failing,
and then the training is restarted.
DDR training cannot be done meaningfully while the software is
in DDR. If the system is intended to run from eNVM, like a
bootloader, the linker script should be tuned to utilize the envm
region as follows:
envm (rx) : ORIGIN = 0x20220100, LENGTH = 128K - 256
l2lim (rwx) : ORIGIN = 0x08000000, LENGTH = 1024k
256 bytes are reserved for the system; The fixed block may be
installed from the 'hart-software-services' -repository:
https://github.com/polarfire-soc/hart-software-services.git
For example, the 256-byte image: hss-envm-wrapper-bm1-dummySbic.bin
may be prepended on the nuttx bootloader image in the following
manner:
cat hss-envm-wrapper-bm1-dummySbic.bin > nuttx_bootloader.bin
cat nuttx.bin >> nuttx_bootloader.bin
riscv64-unknown-elf-objcopy -I binary -O ihex --change-section-lma
*+0x20220000 nuttx_bootloader.bin flashable_image.hex
This provides an image 'flashable_image.hex' that may be flashed on
the eNVM region via Microsemi Libero tool.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
- Fix the FPU enabling code
- If booting from eNVM, all harts start booting. With CONFIG_MPFS_BOOTLOADER,
one can allow just one hart booting and rest are stuck in wfi.
- Check that mtvec is actually updated before continuing the boot
- Create 5 IRQ stacks, one for each hart
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Jump to mpfs_start with mhartid in a0 as the comment says
- Don't invalidate mmu tlb on e51 (it doesn't have mmu)
- Fix FPU initialization flags on e54 (it fires IRQ5 and crashes)
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This commit adds header file imxrt_adc_etc.h for external ADC trigger
module. This contains only definitions of ADC_ETC registers and separate
bits, implementation of ADC_ETC driver is yet to be done.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request. In this case the
DEBUGASSERT will trigger. We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
spinlock.
If we repeatedly call up_cpu_pause and up_cpu_resume, there would be
cases where the next call to up_cpu_pause happens while the other CPU is
still responding to the previous resume request. In this case the
DEBUGASSERT will trigger. We should allow the first CPU to wait until the
other CPU has finished responding to the resume request.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
SCOMPARE1 is used by some atomic instructions and need to be preserved
during a context switch.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
David Sidrane has submitted the ICLA
Mateusz Szafoni has submitted the ICLA
Sebastien Lorquet has submitted the ICLA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
pid variable was initialized to -EINVAL to prevent rt_timer_deinit
from delete an invalid kthread. But priv->pid was being overwritten in the
rt_timer_init, so in case of failure to create a kthread, it would
call rt_timer_deinit with a non expected initialization value.
file. This function is already defined in esp_himem and is used only
when that file is built. We don't need another weak function.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
The stm32_gpiosetevent calls stm32_configgpio. So
the pin is infact restored to the SDMMC/SDIO D0.
The seconday init, dropped interrupts in a debug
build with HW stack checking on after the GPIO glich
fixes and that was how it was detected.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source.
This prevents gliches on changing to an output mode.
If not the ALT mux can be selecting a IP block that
is drving the line to say 0. Then the output is connected
to that source, then swithced to the correct source. This
produced a 430 nS glich on a F4 @168 Mhz. It was a enough
to corrupt an I2C device with a bus monitor.
This adds the emmcsd driver for the Polarfire Icicle kit.
The driver has been tested with several SD-cards, such as:
- Kingston 32 GB SDS2 Canvas Select Plus
- Kingston MicroSD Canvas Select Plus
- Sandisk Extreme PRO 32 GB
- Transcend 8 GB MicroSD
The internal eMMC hasn't been tested comprehensively.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
Summary:
- This commit replaces the critical section with spinlock in cxd56_serial.c
Impact:
- None
Testing:
- Tested with spresense:rndis_smp, spresense:rndis
and spresense:rndis_wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The registers may be in window during interrupt.
Flush window stack to stack first.
And fix warning in build.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Up_getsp may be not inline in gcc, thus get the sp
is up_getsp function's sp, not the caller function.
Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com>
Rearchitect video driver:
- Define two video I/F(struct imgsensor_ops_s and struct imgdata_ops_s),
and support them.
- CISIF driver supports new video I/F struct imgdata_ops_s.
- ISX012 driver supports new video I/F struct imgsensor_ops_s.
- Move ISX012 driver to general driver directory.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
Repeated automated sercon, serdis on VBUS proved to fail
for CDCACM DATA IN (device Serial TX). The root cause was
that the EP was left active after disconnect. This resulted
in the first serial write falling to kick-off the EP IN request.
That should restart the EP ISR.
This commit moves the Wi-Fi initialization to
Wi-Fi specific file and to spiflash initialization.
It also reserves one partition for Wi-Fi use and for general use,
and makes it possible to me mounted by several FS.
functions will call esp32_txint again which leads to deadlock since
esp32_txint has already locked the spinlock.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This reverts commit 45672c269d.
Because:
* It's very confusing to have cc as LD.
* I don't see what "-nostartfiles -nodefaultlibs" in LDFLAGS are
supposed to do when we use LD directly. It would be simpler to
remove them from our LDFLAGS.
Correct typos in include/nuttx/arch.h and suppress
"'noreturn' function does return" warning coming from arm_pthread_exit.c
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
This is currently only used on STM32L4+ devices. Page erase in
flash_erase() function supports only dual-bank mode so it makes little
sense to configure this for unsupported single-bank mode.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
This commit removes the initialization of the Wi-Fi partition
from the Wi-Fi board logic and moves it to the SPI Flash board code.
It creates 2 different partition (one for Wi-Fi and one for general
use).
It also allows these partitions to be mounted over several FSs.
When SIM_SPI is valid, a specified Linux SPI device ‘spidevN.P’(N is bus number and P is CS number) is attached to nuttx simulator, shown as 'spi0' under /dev. One may type spi command (need SPITOOL valid) in NSH to control the Linux SPI and exchange data, other devices such sensors can use it to debug in simulator on a Ubuntu PC. Note that a USB<>SPI module (e.g. CH341A/B) should be plugged in to achieve Linux SPI ports.
Change-Id: I275b2c2bbf6d14bcdf514c89efb9a2264d69e9a3
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
CAN_ESR2 register was having problems of havng the correct values when
the bus was busy (with 3 and more nods). The register bit fields were
incorrectly indicating that there is no free MB and would not updated
itself from this state which was causing the applications to freeze on
write. This change relies only on a software control which should avoid
the problems described above.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
- I noticed that qemu-intel64:nsh does not work
- And I found that commit 6e6eecaa73 affected this issue
- This commit changes idle stack allocation to fix the issue
Impact:
- None
Testing:
- Tested with qemu-intel64:nsh and qemu-intel64:ostest
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
The name used in Tensilica support file core-isa.h for all vendors is
`XCHAL_NUM_INTLEVELS`.
Use a new name may be confused by newer porting xtensa arch.
Change-Id: Ie108d3fdfcc02c81f0eacfca852a1cfc9eea17de
The PRO CPU and APP CPU have different peripherals for GPIO interrupts.
Each CPU needs to allocate an interrupt and attach it to its GPIO
peripheral.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This feature depends on frame pointer, "-fno-omit-frame-pointer" is mandatory
This feature can not be used in THUMB2 mode if you are using GCC toolchain,
More details please refer:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92172
Signed-off-by: chao.an <anchao@xiaomi.com>
Matrix.
This allows manipulating interrupts from both CPUs. Internal interrupts
however, still need to be disabled/enabled by each CPU.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
They do the same thing (manipulate interrupts) keeping them separated
was making things harder.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Allocating and attaching interrupts were both exported outside, however
these two move hand in hand and we don't have to expose these details.
Also, the parameters passed are saved and will be used to retrieve
information about the interrupt and the attached peripheral.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
interrupt.
That function will have a parameter to decide whether to allocate a
level sensitive interrupt or an edge sensitive interrupt.
All the drivers are also updated with this API change.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Ken Pettit is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
are do not go through the regular process where we attache the CPU
interrupt to a peripheral and update our map, also, they are fixed and a
have reserved CPU interrupt, thus hard code their values at startup.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
At this point we are in a critical section and have all the necessary
information to disable the interrupt properly (CPU, and CPU interrupt).
Leaving it to the drivers will complicate things as converting from IRQs
to CPU interrupts could be tricky in SMP mode.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
This map also keeps track of the CPU that attached the IRQ. This will
be used to properly disable the interrupt in the correct CPU in SMP
mode.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Add a driver for CorePWM block, which can be instantiated on PolarFire SOC FPGA
This supports 2 CorePWM blocks on the FPGA. One CorePWM block provides 8 PWM output signals
In AArch32, the frame pointer is stored in register R11 for ARM code or register R7 for Thumb code.
In AArch64, the frame pointer is stored in register X29.
Signed-off-by: chao.an <anchao@xiaomi.com>
ESP32 uses a different function to start the app CPU and no other xtensa
CPU uses this __cpu1_start function.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Consider follow coprocessor configuration case:
\#define XCHAL_CP_NUM 1 /* number of coprocessors */
\#define XCHAL_CP_MAX 2 /* max CP ID + 1 (0 if none) */
\#define XCHAL_CP_MASK 0x02 /* bitmask of all CPs by ID */
\#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
\
\#define XCHAL_CP1_NAME "AudioEngineLX"
\#define XCHAL_CP1_IDENT AudioEngineLX
\#define XCHAL_CP1_SA_SIZE 208 /* size of state save area */
\#define XCHAL_CP1_SA_ALIGN 8 /* min alignment of save area */
\#define XCHAL_CP_ID_AUDIOENGINELX 1 /* coprocessor ID (0..7) */
In this case, XTENSA_CP_ALLSET is 0x1, but valid coprocessors
bitmap is 0x2, use marco XCHAL_CP_MASK instead, it is bitmap of all
vaild coprocs.
Change-Id: I63ec01e4bd0cbafc62d56636cc11bdc4a2f7857f
Previous implementation has always expanded the width of the timer to 32-bit.
This feature is not always needed and should be configurable from Kconfig.
This commit changes the FLexPWM driver for iMXRT MCU so that LDOK bits in
Master Control Register are set at once after all channels are configured.
Setting LDOK bit enables the driver to load prescaler, modulus and PWM
values of corresponging submodule and start PWM output. Setting all bits
at once instead of doing it separately can help avoiding the channels to
be out of sync with each other.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Many duplicate code when more chips add-in,
follow arch/arm/include/irq.h method, use chip/irq.h instead.
Change-Id: I42f516c1dda68e973939c669f627c457cd0bc65e
In levelx(2,3,4,5)_handler, first need to save sp in a12,
then after dispatch_c_isr we can restore sp from a12.
Change-Id: Idb6b64a782da866670a4db80b33435a9b63f02c3
Some toolchain such as xtensa-xcc is unrecognize with constraint letter 'I',
letter 'i' is more common in GNU assembler.
Change-Id: I00f6a33fd7a5f2b95508c683e9954d402b68755f
In config with no "CONFIG_SPINLOCK", include arch/spinlock.h will lead to
build error as multi definition with spinlock_t. Nuttx/spinlock.h will
include arch/spinlock.h when needed.
Change-Id: I33b48503f679ec79af3a0ef1f0fb1536aaf1ce7c
When use poweroff command,host_abort will be called,but may be make __stack_chk_fail irq, and host_abort be called in PANIC(), so bring infinite loop, in turn it can not exit SIM.
Signed-off-by: buyuer <dingddding@163.com>
Currently the "esp32_spiflash_alloc_mtdpart" allocates a
statically-defined partition from "offset" and "size" set via
Kconfig.
This commit changes the function interface to receive those information
as arguments, enabling the creation of multiple MTD partitions with
different offsets and sizes.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Number of configured ADC channels is currently only defined in board
level section, typically in xxx_adc.c file. This commit introduces
ioctl command ANIOC_GET_NCHANNELS that returns the number of configured
channels which is determined by the driver code. The change can allow the
applications to be more flexible when it comes to multiple ADC devices
with different number of configured channels.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
