sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,048 Commits 1 Branch 0 Tags 291 MiB
ebc8333a0b
Commit Graph

3129 Commits

Author SHA1 Message Date
Gregory Nutt
d68a6059e0 SAMA5 SSC: Frame Synch Delay is now configurable 2014-08-01 12:25:31 -06:00
Gregory Nutt
c2c2921901 SAMA5D SSC: Needs to account for data offset in audio buffer. 2014-07-31 19:14:24 -06:00
Gregory Nutt
513329fd24 SAMA5D3X-EK: Add support for the WM8904 audio CODEC 2014-07-31 11:14:57 -06:00
Gregory Nutt
ffcc0b8da3 SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes. 2014-07-31 11:09:56 -06:00
Gregory Nutt
c0c4cda763 SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller. 2014-07-30 11:20:06 -06:00
Gregory Nutt
611ea42dbf SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29). 2014-07-30 10:19:41 -06:00
Gregory Nutt
059812c872 SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode 2014-07-29 21:13:28 -06:00
Gregory Nutt
e053158f95 SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK 2014-07-29 07:12:36 -06:00
Gregory Nutt
29ea8ab0e4 Cosmetic changes to comments 2014-07-29 07:11:16 -06:00
Gregory Nutt
42a975af74 Fixes to last SAMA5 PMIC checkin 2014-07-28 17:09:37 -06:00
Gregory Nutt
99927e918d LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit. 2014-07-28 07:23:49 -06:00
Gregory Nutt
dd4be66f1c ARM: Move L2 cache initialization to much later in the sequence 2014-07-27 10:03:33 -06:00
Gregory Nutt
b57d2182ab ARMv7-A L2 Cache currently depends on EXPERIMENTAL because it does not yet work properly 2014-07-26 18:48:54 -06:00
Gregory Nutt
6f5280d284 ARMv7 L2 Cache: Minor bugfixes/improvements 2014-07-26 18:48:26 -06:00
Gregory Nutt
ee59870325 Enables cache early in boot-up sequence 2014-07-26 18:48:00 -06:00
Gregory Nutt
4e146d2ec2 Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled 2014-07-26 18:47:33 -06:00
Gregory Nutt
873788bf5a New cache.h file. Renames cp15_XYZ_cache() to arch_XYZ_cache() and addes L2 cache support if L2 cache is enabled 2014-07-26 18:46:52 -06:00
Gregory Nutt
2eb526253b Rename ARMv7-A cache.h to cp15_cache.h. Things will be broken on this commit until I get the new cache.h in place. 2014-07-26 16:54:19 -06:00
Gregory Nutt
6d9ca195ee arch/arm/src/armv7-a/arm_l2cc_pl310.c, l2cc.h, l2cc_pl310.h, Kconfig: Add initiali support for the ARM L2CC-PL310 L2 cache. 2014-07-26 16:50:08 -06:00
Gregory Nutt
fcbf89c6f6 ARMv7-A: L2CC PL310 address filtering is an optional feature 2014-07-25 19:46:09 -06:00
Gregory Nutt
a007fa3f5e ARMv7-A: Add missing L2CC PL310 bit definitions 2014-07-25 19:41:35 -06:00
Gregory Nutt
e74f37445b rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well. 2014-07-25 17:25:17 -06:00
Gregory Nutt
2ec0ab3b5e 3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN 2014-07-24 16:51:07 -06:00
Gregory Nutt
1366ce0a02 Oops, should have been NVIC_SYSH_PRIORITY_DEFAULT 2014-07-24 16:42:15 -06:00
Gregory Nutt
a3d20b2fa1 LPC17 Ethernet: Added option to use the kernel worker thread to do most of the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. Eliminated a problem with PHY DP83848C : it doesn't need a specific initialization on mbed. Critical bufix: From time to time (after some hours) the Ethernet receiver would lose one receive interrupt and the IP stack never recover because there is no receive watchdog as the transmit watchdog. From Max 2014-07-24 16:39:18 -06:00
Gregory Nutt
dd74e75d1e Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE option in Kconfig. From Max 2014-07-24 16:23:31 -06:00
Gregory Nutt
21d67c5b1b Mostly cosmetic changes from Max 2014-07-24 16:00:21 -06:00
Gregory Nutt
43a578d2d3 Eliminate warnings. From Max 2014-07-24 15:50:37 -06:00
Gregory Nutt
5e19807250 Correct the initial value of the BASEPRI register. This was apparently never being initialized. From Max 2014-07-24 15:37:13 -06:00
Gregory Nutt
949e002d76 Fix a recently introduced typo that was being masked by some bad conditional compilation 2014-07-22 11:45:14 -06:00
Gregory Nutt
d57c3b4e82 Update ChangeLog 2014-07-22 07:25:01 -06:00
Gregory Nutt
45c03e5a1a STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen 2014-07-22 07:23:17 -06:00
Gregory Nutt
615b7d6c7a Fix typos in the STM32 DAC header file. From Petteri Aimonen 2014-07-22 07:13:33 -06:00
Gregory Nutt
af8f5f4bdc SAMA5D4 XDMAC: Never sets a channel as secure. Will probably have to revisit this 2014-07-21 17:46:35 -06:00
Gregory Nutt
4ce2e094ba SAMA5D4: Fix some HSMCI issues when XDMAC0 is enabled 2014-07-21 17:45:48 -06:00
Gregory Nutt
80c0b5628d SAMA5 HSMCI: Correct multi-block DMA setup; Fixes related to DMA timeout. Still problems with HSMCI DMA via XDMAC 2014-07-21 16:49:56 -06:00
Gregory Nutt
519c8f3e97 SAMA5 XDMAC: Missing some CUBC bits 2014-07-21 16:47:16 -06:00
Gregory Nutt
2d69c2f519 SAMA4D5 HSMCI: Set burst size to 1, sample DMA registers on timeout, and don't return from transfer until BOTH the HSMCI transfer and DMA complete 2014-07-21 13:24:55 -06:00
Gregory Nutt
c5b58b189c XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup 2014-07-21 13:23:36 -06:00
Gregory Nutt
35ea8f1542 Fix a commented out assertion 2014-07-20 17:06:55 -06:00
Gregory Nutt
b207138be9 Fix typos in comments 2014-07-20 13:09:47 -06:00
Gregory Nutt
7ba2d9ed36 SAMA5D4-EK: PIO Schmitt trigger logic backward 2014-07-20 13:04:30 -06:00
Gregory Nutt
9392953ea1 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
7c56185006 SAMA5D ADC: Fix some typos in conditional compilation 2014-07-19 13:56:48 -06:00
Gregory Nutt
3c29703c42 SAMA5 SCK: The SAMA5D3 does things a little differently 2014-07-19 13:55:53 -06:00
Gregory Nutt
e82143ac38 SAMA5 PCK: Add support for the slow clock as the PCK clock source 2014-07-19 13:55:08 -06:00
Gregory Nutt
8986bd3976 SAMA5: Update slow clock logic. Things work a little differently on the SAMA5D3 2014-07-19 13:25:59 -06:00
Gregory Nutt
813eade679 SAMA5: Add slow clock support 2014-07-19 13:07:55 -06:00
Gregory Nutt
c7055a4cb8 SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
8055a59d49 SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
424d47cfee SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
30603b1021 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
20493f1212 Lpc17xx Ethernet: Comment out an assertion that is reported to first inappropriately. From Max 2014-07-11 12:25:11 -06:00
Gregory Nutt
67468408ae SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
c7d53cb927 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
6563ae07c2 Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
fc973eb512 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
0d4255257d SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c1ca11331d SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
ee351dc695 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
c4b9eaa01f Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
6c4f57b0dc SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
446d9daa94 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
8bc8a86b90 SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
3fe95f83de Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
14c90921b3 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
ae95f4e4d2 SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
194f9721f7 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
56629f7fde maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
87055cff08 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
77439f3c75 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
1211bbd904 Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
ca1d7d0f32 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
2bd5963622 SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
8b2fb4725b SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
68f83f973e CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
954048b8e9 Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
7f5ea07329 Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
1c0054114e Beginning of a crypto/ subsystem from Max Neklyudov 2014-07-03 07:42:44 -06:00
Gregory Nutt
4c03534f9c SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
fb44a97359 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
596dbc20ef SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
30fc821bc8 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
a420171a4a SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
e7aa949380 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
f5abca3952 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
a2507acab8 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
289dc6dc71 SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
c5f2ec1637 Fix typo/compile error introduced with last HSMCI changes 2014-06-30 16:08:29 -06:00
Gregory Nutt
d8f4b29d5f SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled 2014-06-30 14:26:09 -06:00
Gregory Nutt
03f3f8966c SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM 2014-06-30 11:04:34 -06:00
Gregory Nutt
f6a3d4b728 SAMA5D4: Don't touch ISLR unless PIO is configured as an interrupt 2014-06-30 09:17:42 -06:00
Gregory Nutt
3010eddf11 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
ed02593af7 STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
48e6f0ba78 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
bfff6190d0 Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
a095b1b260 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
c4ace8244d Fix typos in debug statements 2014-06-30 07:38:02 -06:00
Gregory Nutt
ce710bb94a SAMA5 PIO: Add support for secure interrupts; Fix PIO debug output 2014-06-29 17:46:55 -06:00
Gregory Nutt
e681a582a7 SAMA5: Remove kruft in PIO header file 2014-06-29 17:45:42 -06:00
Gregory Nutt
70fa9ad81d SAMA5D4 HSMCI: Fix a compiler in a debug statement 2014-06-29 12:01:08 -06:00
Gregory Nutt
1384148415 SAMA5D4 XDMA: Fix some typos 2014-06-29 11:24:57 -06:00
Gregory Nutt
9fab30e3b5 Fix system bus IDs for SAMA5D4; Don't use explicit PERIPHID_SHIFT for symmetry with memory 2014-06-29 11:24:10 -06:00
Gregory Nutt
d4f27b9e08 SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4 2014-06-29 09:52:07 -06:00
Gregory Nutt
7c8c583722 SAMA5: Add configuration to assign an XDMAC channel to an HSMCI 2014-06-29 08:43:46 -06:00
Gregory Nutt
b7fad79a1d SAMA5D4-EK: Updates to get the at25boot configuration building correctly 2014-06-28 09:39:50 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
72d8a6a7ef SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
Gregory Nutt
b26d5d2191 SAM4CM: Add IPC register header file. From Macs N 2014-06-27 12:02:30 -06:00
Gregory Nutt
f8e5e82402 Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo 2014-06-27 09:30:41 -06:00
Gregory Nutt
6a451baa51 SAMA5D4: Add configuration to redirect all interrupts to the AIC 2014-06-26 11:51:39 -06:00
Gregory Nutt
fd7b06c68e STM32 I2C reset. Add missing GPIO configuration. From Alex D 2014-06-25 16:08:31 -06:00
Gregory Nutt
ff97ad1245 Clean-up packet socket naming 2014-06-25 10:34:52 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9 Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
eb340e683f Add support for the LPCXpresso's RTC, ADC, DAC, Timer, PWM, and MCPWM. All form Max 2014-06-23 12:13:52 -06:00
Gregory Nutt
4e3c794363 SAMA5D4: Add missing mappings for the VDEC and L2CC memory regions 2014-06-21 14:25:47 -06:00
Gregory Nutt
4b9666658e Correct type of SAMA5 arm_decodefiq() return value 2014-06-21 10:34:35 -06:00
Gregory Nutt
0a134f0158 Need to enable FIQ in initial task state; Improve H32/64 test in IRQ handling 2014-06-21 09:55:09 -06:00
Gregory Nutt
40b7ddf68e SAMA5: FIQs should be disabled along with IRQs on most exeptions in most configuratinons. arm_decodefiq and arm_decodeirq are mutually exclusive and, hence, can use the same interrupt stack 2014-06-20 18:49:01 -06:00
Gregory Nutt
c68d2532be SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
8f4f73884b SAMA5D4: Fix MATRIX32 base address 2014-06-20 18:15:13 -06:00
Gregory Nutt
8fb8774c26 SAMA5D4: Minor fixes to get working with SAMA5D3 again 2014-06-20 16:01:45 -06:00
Gregory Nutt
0a2133b57f SAMA5D4: Add partial support for secure interrupt controller (SAIC) 2014-06-20 15:22:00 -06:00
Gregory Nutt
aecddf9b52 SAMA5D4: USART peripheral clock appears to be MCK/2 2014-06-20 11:40:36 -06:00
Gregory Nutt
b31f34cf94 SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED 2014-06-20 10:33:33 -06:00
Gregory Nutt
9869c9b50d SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked 2014-06-19 15:52:42 -06:00
Gregory Nutt
c14d80ee25 SAMA5D4: Initial bring-up fixes 2014-06-19 14:16:36 -06:00
Gregory Nutt
902c1342b9 Cosmetic cleanup 2014-06-18 08:24:53 -06:00
Gregory Nutt
e2ede42d14 SAMA5D4: XDMAC driver now compiles error/warning free (still untested) 2014-06-17 16:31:09 -06:00
Gregory Nutt
4b3342fd96 SAMA5D4: More progress on XDMAC driver (still no complete); Also fixes some critical errors in the SAMA5D3 DMA definitions 2014-06-17 13:18:52 -06:00
Gregory Nutt
5d73322dc7 SAMA5D4: Correct MATRIX register addresses 2014-06-14 10:42:53 -06:00
Gregory Nutt
1a236c13de SAMA5D4: Implement SDRAM initialization 2014-06-14 10:42:26 -06:00
Gregory Nutt
9e7eb2d12d SAMA5D4: Fix some memory remapping issues; updates to comments and README files 2014-06-14 08:02:58 -06:00
Gregory Nutt
cf72b05936 SAMA5: XDMAC update (still not complete) 2014-06-13 11:59:44 -06:00
Gregory Nutt
ab79090ce0 SAMA5D4: Initial XDMAC driver logic; initial check-in is little more the the DMAC driver with some name changes 2014-06-12 16:33:04 -06:00
Gregory Nutt
a2cb59cab8 First check-in of Lazlo's PF_PACKET 'raw' socket implementation 2014-06-12 11:52:06 -06:00
Gregory Nutt
a23245781a STM32: Handle setting of USART CR1_M when 8 bits of data plus parity 2014-06-11 15:49:54 -06:00
Gregory Nutt
5009def270 Typo in last SAMA5D4 commit 2014-06-11 13:43:54 -06:00
Gregory Nutt
bb8fd2fa2c SAMA5: Add support for Micrel KSZ8081 PHY 2014-06-11 13:25:59 -06:00
Gregory Nutt
22a36b7af3 SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
288c891ad1 SAMA5D4: Still trying to reconcile Ethernet interfaces 2014-06-11 08:01:48 -06:00
Gregory Nutt
379f516780 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
348e666278 STM32: Expicitly include header file files. From Freddie Chopin 2014-06-10 15:49:48 -06:00
Gregory Nutt
e9aec9fdff SAMA5D4: update MATRIX register definitions for the SAMA5D4 2014-06-10 13:15:29 -06:00
Gregory Nutt
f14775b755 SAMA5D4: Complete MPDDR header file 2014-06-10 11:16:05 -06:00
Gregory Nutt
021122f921 SAMA5D4: Add MPDDRC file (incomplete) 2014-06-10 08:46:14 -06:00
Gregory Nutt
d54b7b733c Move SAMA5D3 MPDDRC definitions to a separate header file 2014-06-10 08:11:31 -06:00
Gregory Nutt
fc343d833a SAMA5D4: Update LCDC header file 2014-06-09 13:27:08 -06:00
Gregory Nutt
3a10623e29 Add logic to select between incompatible SAMA5D3 and SAMA5D4 EMAC header files 2014-06-09 12:24:39 -06:00
Gregory Nutt
48a8ead37b SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
a72cf5ee76 SAMA5D4: Updated EMAC header file 2014-06-09 11:40:11 -06:00
Gregory Nutt
6fb582d1af SAMA5D4: Add EMAC header file 2014-06-09 11:29:02 -06:00
Gregory Nutt
fa3e843ddc SAMA5D4: More header file changes 2014-06-09 10:07:00 -06:00
Gregory Nutt
78c9fcdfb9 SAMA5D4: update ISI register definition header file 2014-06-09 09:29:23 -06:00
Gregory Nutt
979b732f3b SAMA5D4: Completes PMC modifications for the SAMA5D4 2014-06-09 07:55:51 -06:00
Gregory Nutt
b2de85be4e SAMA5D4: Completes L2CC register definition header file 2014-06-08 19:08:11 -06:00
Gregory Nutt
07df0b41f1 SAMA5D4: Update HSMC register definitions 2014-06-08 16:27:58 -06:00
Gregory Nutt
175193788d SAMA5D4: Update PIO register definitions 2014-06-08 15:35:51 -06:00
Gregory Nutt
140bbdb51f SAMA5D4: Update DBGU header file 2014-06-08 14:37:09 -06:00
Gregory Nutt
b43fa3910a SAMA5D4: Update PWM header file 2014-06-08 14:16:50 -06:00
Gregory Nutt
39cb768969 SAMA5D4: Updated HSMCI header file 2014-06-08 12:49:45 -06:00
Gregory Nutt
04430796c4 SAMA5D4: Update ADC register definition header file 2014-06-08 12:19:05 -06:00
Gregory Nutt
256cd0b34c SAMA5D4: Updated RTC header file 2014-06-08 10:14:36 -06:00
Gregory Nutt
f65a238389 SAMA5D4: Update register definitions; add support for TC2 2014-06-08 09:19:50 -06:00
Gregory Nutt
23557d31bb SAMA5: Add TWI3 support 2014-06-08 08:25:39 -06:00
Gregory Nutt
8e1d1db8d1 Updated SAMA5 SFR header file for the SAMA5D4 2014-06-08 07:48:36 -06:00
Gregory Nutt
3e3d3dff9b SAMA5D4: Add support for UART4 2014-06-08 07:47:56 -06:00
Gregory Nutt
e91c27ca5a SAMA5D4: Update one more register definition header files 2014-06-07 14:40:49 -06:00
Gregory Nutt
bc80629149 SAMA5D4: Update some register definition header files. Many more still to be done 2014-06-07 13:36:46 -06:00
Gregory Nutt
07c731d2bb SAMA5D4: Various changes to get the SAMA4D-EK to build 2014-06-06 15:39:40 -06:00
Gregory Nutt
d13fbcc1fc LPC17: Fix a critical error in GPDMA reported by Lizhuoyi 2014-06-06 11:20:28 -06:00
Gregory Nutt
2d3f0f01a0 LPC23xx: Several fixes for typos from Lizhuoyi 2014-06-06 11:06:19 -06:00
Gregory Nutt
c40c8d1924 SAMA5D4: Add L2CC register definition header file (incomplete) 2014-06-05 14:38:08 -06:00
Gregory Nutt
852cf2ee5b Finishes the SAMA5D4 XDMAC register definition header file 2014-06-04 16:59:41 -06:00
Gregory Nutt
74f95efdfc SAMA5D4: Add beginning of XDMAC register definition header file (incomplete) 2014-06-04 14:40:34 -06:00
Gregory Nutt
77c487b1ed SAMA5D4: Has two XDMA modules 2014-06-04 14:39:52 -06:00
Gregory Nutt
975dc5ec46 SAMA5D4: Let's consistently use the name XDMAC for the SAMA5D4 DMA module 2014-06-04 14:39:29 -06:00
Gregory Nutt
7d6633c2a4 Minor naming fix 2014-06-04 13:35:48 -06:00
Gregory Nutt
5ddcb233cc SAMA5: Add pin mux definitions for the SAMA5D4 2014-06-04 12:58:49 -06:00
Gregory Nutt
0342b3f10b SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
41032b021b SAMA4D4: Basic framework to support the SAMA4D4. Not yet complete 2014-06-03 17:49:51 -06:00
Gregory Nutt
cc369aa3d6 A few build fixes from last, big ARP relocation change 2014-05-30 12:32:20 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
b3abd30a76 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
3feabec7d5 STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer. 2014-05-27 07:10:53 -06:00
Gregory Nutt
c68f9477cf Back out PX4 fixes that were reverted in PX4 repository 2014-05-25 07:53:00 -06:00
Gregory Nutt
5d3479bbec STM32 I2C: Final fixes from Max Kriegleder et al. 2014-05-23 08:42:14 -06:00
Gregory Nutt
8dbc4714c5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
9e941f1195 Change bne to bne.n in irqrestore() 2014-05-22 09:01:25 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
d2e1d8f6ee STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen 2014-05-20 08:12:07 -06:00
Gregory Nutt
b77854f245 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
947f31f5a9 SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
5258e8d9e7 Fix one error that I made in the last check-in (there are probably more) 2014-05-14 08:09:08 -06:00
Gregory Nutt
fb774d677c Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
697b0d5b61 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
5d35f07278 STM32 I2C: Cosmetic changes in preparation to merge a change 2014-05-13 13:11:10 -06:00
Gregory Nutt
43fd4676da SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
d9a20861a6 Updated README and comments 2014-05-10 11:36:20 -06:00
Gregory Nutt
fa7c79712e STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge 2014-05-10 10:34:05 -06:00
Gregory Nutt
308d0dbe06 Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit 2014-05-09 06:41:01 -06:00
Gregory Nutt
02bb1d69b8 Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
1cc859405e STM32: Rename pinmap.h files to better reflect the chip naming conventions 2014-05-07 13:05:12 -06:00
Gregory Nutt
6e9df4d5ab STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
1636d7cb2f Ooops... last (cosmetic) changes were still in the editor 2014-05-06 15:00:39 -06:00
Gregory Nutt
422a9c9bfd Optimized memcpy() functin for the ARMv7-A from David Sidrane 2014-05-06 14:58:48 -06:00
Gregory Nutt
a1871c7045 STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 11:35:13 -06:00
Gregory Nutt
ca31e38f7b Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
acd40e73aa The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
bfa9df89e2 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
27d3a4962a STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
f72a873af9 Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
Gregory Nutt
449ad68fa1 Correct some typos in STM32 RCC header files noted by Ramtin Amin 2014-05-05 07:23:26 -06:00
Gregory Nutt
42432ab1d0 STM32 F401 has no CCM memory 2014-04-30 16:49:39 -06:00
Gregory Nutt
d7b261eb46 Fix configuration for F401: It has has FSMC and so the option should not be offered. But there are many more options available for the F401 that should be availalbe: CAN, nonexistent timers, etc. These will all need to be addressed 2014-04-30 16:12:36 -06:00
Gregory Nutt
e317cef653 The CONFIG_SYSTEMTICK_EXTCLK selection should only be available on systems that support it 2014-04-30 15:32:06 -06:00
Gregory Nutt
f804bf80e5 Updated system timer logic from Bob Doiron 2014-04-30 14:46:26 -06:00
Gregory Nutt
91d94a0b03 SAM3/4: Enhanced timer/counter driver from Bob Doiron 2014-04-30 14:10:02 -06:00
Gregory Nutt
8be212ccc3 Nucleo-F401RE: Fix memory usage 2014-04-30 08:20:30 -06:00
Gregory Nutt
b252889270 ARMv7-M: Add FPU-related CFLAG settings for the CodeSourcery of Linux toolchain 2014-04-29 15:02:34 -06:00
Gregory Nutt
d43b12c1e1 Sourceforge patch #40. Fix some conditional logic in clock configuration. From Luciano Neri 2014-04-29 11:32:33 -06:00
Gregory Nutt
de7136e69b STM32: More places where up_prioritize_irq is called when CONFIG_ARCH_IRQPRIO is not defined. Sourceforge ticket #26 2014-04-28 07:07:47 -06:00
Gregory Nutt
ae82fa65a6 Fix spelling, only one t in exiting 2014-04-27 15:49:38 -06:00
Gregory Nutt
1745e978fb Sourceforge ticket #26: STM32 up_prioritize_irq should not be called if CONFIG_ARCH_IRQPRIO is not defined 2014-04-25 16:23:00 -06:00
Gregory Nutt
0bf091f2a0 STM32 dmapreflight method must be conditioned on CONFIG_SDIO_PREFLIGHT. From Pelle Windestam 2014-04-25 07:22:14 -06:00
Gregory Nutt
e4fd434a60 Cosmetic update to comments and README files 2014-04-24 12:44:30 -06:00
Gregory Nutt
0d2e525bd4 Updated comments; minor correction in some naming 2014-04-23 14:46:39 -06:00
Gregory Nutt
f62eef1af6 Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
9bd0102aae Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
6e72b0fb0f Back out a bad change in the last commit + add missing SAM4S Xplained Pro file 2014-04-22 11:04:31 -06:00
Gregory Nutt
6e94a4e1e2 Misc changes to get a clean compilation after incorporating all of Bob Doison's changes 2014-04-22 10:38:08 -06:00
Gregory Nutt
9f9f790d0a SAM3/4 T/C driver updated to get closer to coding standard 2014-04-22 09:10:32 -06:00
Gregory Nutt
75f64beb80 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
d09c57eade examples/serialrx added by Bob Doison 2014-04-22 08:40:48 -06:00
Gregory Nutt
13292c70c2 Misc SAM4S-related changes from Bob Doison 2014-04-21 19:32:15 -06:00
Gregory Nutt
f52ff8cf7b SAM3/4: Add watchdog timer support. From Bob Doisin 2014-04-21 19:10:06 -06:00
Gregory Nutt
5eadd8df7a SAM3/4: Support for PDC based HSMCI ADMA from Bob Doiron 2014-04-21 17:18:30 -06:00
Gregory Nutt
b0f4941c77 SAM4S: Fix error in macro that disabled peripheral clocking. From Bob Doiron 2014-04-21 17:06:01 -06:00
Gregory Nutt
d16ea614e9 SAM3/4 RTC driver from Bob Doiron 2014-04-21 17:04:22 -06:00