Gregory Nutt
|
43eb04bb8f
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
Gregory Nutt
|
d40a473f72
|
Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn().
|
2016-06-20 09:37:08 -06:00 |
|
Gregory Nutt
|
8021354e01
|
ullinfo (vs ulinf)
|
2016-06-19 18:14:27 -06:00 |
|
Gregory Nutt
|
5b2aa7bf99
|
Remove all traces of CONFIG_SYSLOG
|
2016-06-19 13:59:43 -06:00 |
|
Gregory Nutt
|
77d01ab1da
|
Cosmetic changes from review of last PR
|
2016-06-18 13:00:17 -06:00 |
|
Gregory Nutt
|
d563a205ea
|
Merged in david_s5/nuttx/upstream_nucleo-144 (pull request #64)
Upstream_nucleo 144
|
2016-06-18 12:37:23 -06:00 |
|
David Sidrane
|
f8dd4dd3eb
|
Missing Brace
|
2016-06-18 08:06:33 -10:00 |
|
Gregory Nutt
|
d20128cc11
|
STM32: In big change off err() to info(), several debug statements lost their ll property.
|
2016-06-18 07:40:27 -06:00 |
|
David Sidrane
|
1c472a5ff0
|
STM32 adc heared file error
|
2016-06-17 12:48:29 -10:00 |
|
David Sidrane
|
ae04f25965
|
Clean up and Use two level include 74xx77xx ADC
|
2016-06-17 12:48:29 -10:00 |
|
Gregory Nutt
|
0d3ecb3ddd
|
Fix another victim of the mass name changes: xyz_errmonitor->xyz_dbgmonitor
|
2016-06-17 07:00:33 -06:00 |
|
Pascal Speck
|
794a64a99b
|
hen configuring a GPIO via stm32_configgpio() the function will first set the mode to output and then set the initial state of the gpio later on. If you have an application with an externaly pulled-up pin, this would lead to a glitch on the line that may be dangerous in some applications (e.G. Reset Line for other chips, etc). This changes sets the output state before configuring the pin as an output.
|
2016-06-17 06:23:18 -06:00 |
|
Gregory Nutt
|
46de4a5779
|
Fix another search and replace error from last set of changes
|
2016-06-16 18:19:37 -06:00 |
|
Gregory Nutt
|
4a34540e8f
|
Eliminate a warning
|
2016-06-16 16:22:01 -06:00 |
|
Gregory Nutt
|
088e9920a8
|
Cosmetic: Fix some long lines in comment blocks
|
2016-06-16 15:45:57 -06:00 |
|
Gregory Nutt
|
5ecb8da118
|
Eliminate a warning
|
2016-06-16 15:26:19 -06:00 |
|
Gregory Nutt
|
a63072d080
|
Fix yet more typos from the last commits
|
2016-06-16 15:06:13 -06:00 |
|
Gregory Nutt
|
ae13471244
|
One more time. Correct name of USB debug macros are uinfo and uerr, not usbinfo and usberr.
|
2016-06-16 13:36:37 -06:00 |
|
Gregory Nutt
|
865150f666
|
STM32: Logic to reset backup domain only applies if the RTC is enabled.
|
2016-06-16 13:36:50 -06:00 |
|
Gregory Nutt
|
53ec3ca1a2
|
Fix a cut-and-paste error: uusbinfo->usbinfo
|
2016-06-16 13:18:59 -06:00 |
|
Gregory Nutt
|
e60ced1835
|
Update last change... STM32 does not have STM32_RTC_BKR register.
|
2016-06-16 12:51:21 -06:00 |
|
Gregory Nutt
|
bf0a3bf0c8
|
Fix error in recent LSE-related fix: Requires CONFIG_STM32_PWR, or will not build correctly
|
2016-06-16 12:43:35 -06:00 |
|
Gregory Nutt
|
6c1678d1d9
|
STM32 Ethernet: Fix a bad cut and paster error from recent changes
|
2016-06-16 12:35:57 -06:00 |
|
Gregory Nutt
|
0c8c7fecf0
|
Add _ to the beginning of all debug macros to avoid name collisions
|
2016-06-16 12:33:32 -06:00 |
|
Gregory Nutt
|
fdaf3d7268
|
STM32: Move backup domain reset to stm32_rcc.c in order to avoid disabling LSE during RTC initialiation.
|
2016-06-16 09:52:15 -06:00 |
|
Gregory Nutt
|
f9652812e2
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 09:38:16 -06:00 |
|
Gregory Nutt
|
b7f0fbc073
|
Centralize definitions associated with CONFIG_DEBUG_RTC
|
2016-06-16 07:39:23 -06:00 |
|
Gregory Nutt
|
6b517ed017
|
Centralize definitions associated with CONFIG_DEBUG_WATCHDOG
|
2016-06-16 06:28:04 -06:00 |
|
Gregory Nutt
|
03cbe671ad
|
Centralize definitions associated with CONFIG_DEBUG_PWM
|
2016-06-15 17:23:56 -06:00 |
|
Gregory Nutt
|
5c89b18af8
|
Centralize definitions associated with CONFIG_DEBUG_I2C
|
2016-06-15 16:30:12 -06:00 |
|
Gregory Nutt
|
63b1eb09e6
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
|
Gregory Nutt
|
6d9a0511ad
|
Rename CONFIG_DEBUG_HEAP to CONFIG_HEAP_COLORATION
|
2016-06-15 14:48:06 -06:00 |
|
Gregory Nutt
|
f2cac0ceb7
|
Merged in K-man23/nuttx/stm32f411-fix (pull request #60)
Add GPIO_I2C2_SDA_4 to STM32F411
|
2016-06-15 11:58:40 -06:00 |
|
Gregory Nutt
|
ba03134bed
|
Centralize definitions associated with CONFIG_DEBUG_SPI
|
2016-06-15 10:41:13 -06:00 |
|
Konstantin Berezenko
|
89b192d080
|
Add GPIO_I2C2_SDA_4 to STM32F411
|
2016-06-15 09:06:08 -07:00 |
|
Gregory Nutt
|
c4e6f50eac
|
Centralize definitions associated with CONFIG_DEBUG_IRQ
|
2016-06-15 08:35:22 -06:00 |
|
David Sidrane
|
0bded28cf3
|
Fix some naming errors that were recently introduced with mass substirutions
|
2016-06-14 09:42:04 -06:00 |
|
Gregory Nutt
|
a98bc05f65
|
New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting.
|
2016-06-14 09:07:53 -06:00 |
|
Gregory Nutt
|
0f249016a0
|
Eliminate some warnings
|
2016-06-13 14:01:32 -06:00 |
|
Gregory Nutt
|
26718cee5c
|
Eliminate some warnings when CONFIG_DEBUG_FEATURES is enabled, but no output is enabled
|
2016-06-12 14:44:04 -06:00 |
|
Gregory Nutt
|
a1469a3e95
|
Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err()
|
2016-06-11 15:50:49 -06:00 |
|
Gregory Nutt
|
e99301d7c2
|
Rename *lldbg to *llerr
|
2016-06-11 14:55:27 -06:00 |
|
Gregory Nutt
|
1cdc746726
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
|
Gregory Nutt
|
fc3540cffe
|
Replace all occurrences of vdbg with vinfo
|
2016-06-11 11:59:51 -06:00 |
|
Gregory Nutt
|
3a74a438d9
|
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
|
2016-06-11 11:50:18 -06:00 |
|
Gregory Nutt
|
e6ca12f4c3
|
Changes from review of last PR
|
2016-06-09 16:57:05 -06:00 |
|
Konstantin Berezenko
|
2ebdcb463e
|
Fix compilation errors in debug mode of stm32_pwm.c
|
2016-06-09 15:48:08 -07:00 |
|
Gregory Nutt
|
48c9aa08a3
|
Merged in marten_svanfeldt/nuttx-public/for_upstream/stm32_dma_fix (pull request #43)
Fix STM32 DMA code and configuration for STM32F37X chips
|
2016-06-09 09:10:13 -06:00 |
|
David Sidrane
|
44ead7f40a
|
Fix email address in file headers
|
2016-06-09 08:26:14 -06:00 |
|
Marten Svanfeldt
|
1b36526e91
|
Fix STM32 DMA code and configuration for STM32F37X chips
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
|
2016-06-09 05:02:43 +02:00 |
|
Konstantin Berezenko
|
3fc7b6f0e5
|
Add stm32f105r support
|
2016-06-06 12:52:41 -07:00 |
|
Gregory Nutt
|
053ac343fd
|
STM32 PWM: More review changes from last commit; improve handling of unsigned types
|
2016-06-05 16:01:29 -06:00 |
|
Pierre-noel Bouteville
|
0bd444ae47
|
Just update duty if frequency is not changed and PSM started. This removeis glitch or blinking when only duty is frequently changed.
|
2016-06-05 15:35:43 -06:00 |
|
Gregory Nutt
|
6b84637a5b
|
Update some comments
|
2016-06-04 13:04:13 -06:00 |
|
Gregory Nutt
|
4965d0dc99
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
|
Alan Carvalho de Assis
|
86cfcfd58a
|
Add the up_getc() function to STM32 in order to support the minnsh configuration.
|
2016-06-04 07:22:45 -06:00 |
|
Gregory Nutt
|
37e8536a88
|
STM32: Put timer selections in a separate menu
|
2016-06-04 07:11:05 -06:00 |
|
Gregory Nutt
|
34df98d97e
|
Use DEBUG assertions to save space
|
2016-06-03 14:49:05 -06:00 |
|
Gregory Nutt
|
704fadb0e6
|
STM32 TIM: Assure that a compilation error will occur if the old timer input clock frequency definitions are used
|
2016-06-03 14:17:18 -06:00 |
|
Gregory Nutt
|
3ec2386be8
|
STM32 TIM: There is a TIM17 on some parts too
|
2016-06-03 14:08:28 -06:00 |
|
Gregory Nutt
|
282edefab3
|
STM32 TIM: Add hooks for all previously unsupported timers. Also fix some PWM warnings.
|
2016-06-03 13:51:43 -06:00 |
|
Gregory Nutt
|
c11e923ad4
|
Fix a cut'n'paste error left from last commit.
|
2016-06-03 12:11:55 -06:00 |
|
Gregory Nutt
|
910bac65fa
|
STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville.
|
2016-06-03 11:38:59 -06:00 |
|
Gregory Nutt
|
88a41862b5
|
Revert "STM32 Timer Driver: Change calculation of per-timer pre-scaler value"
This reverts commit 082d32226b .
|
2016-06-03 09:41:17 -06:00 |
|
Pierre-noel Bouteville
|
082d32226b
|
STM32 Timer Driver: Change calculation of per-timer pre-scaler value
|
2016-06-03 08:45:22 -06:00 |
|
Pierre-noel Bouteville
|
426e425a55
|
Correct conditional compilation in STM32 timer cpature logic
|
2016-06-03 08:41:53 -06:00 |
|
Pierre-noel Bouteville
|
6a2a0bf11f
|
Note reserved bits in STM32 ADC
|
2016-06-03 08:39:17 -06:00 |
|
Gregory Nutt
|
fcdc17056b
|
STM32 F4 RTC: I believe that the F405/407 has only a single alarm. Not sure.
|
2016-06-02 15:04:23 -06:00 |
|
Gregory Nutt
|
82c73e206e
|
STM32 F4 RTC, trivial changes
|
2016-06-02 07:58:13 -06:00 |
|
Gregory Nutt
|
2f974ffeaf
|
Merged in david_s5/nuttx/upstream_to_greg (pull request #37)
Fix the Value Line adc IRQ number selection
|
2016-05-31 19:18:11 -06:00 |
|
Gregory Nutt
|
82dec4acab
|
STM32F4 RTC: Remove 24 hour limit; Fix calculation of the alarm register (was not including day of the month). Fix a bad shift value
|
2016-05-31 19:13:21 -06:00 |
|
David Sidrane
|
70f2b47a0d
|
Fix the Value Line adc IRQ number selection
|
2016-05-31 14:54:04 -10:00 |
|
Gregory Nutt
|
6eac8bf28d
|
Update some comments
|
2016-05-31 17:31:15 -06:00 |
|
Gregory Nutt
|
15810946b1
|
Update some comments
|
2016-05-31 17:28:02 -06:00 |
|
Gregory Nutt
|
8ca5daf2b3
|
Changes from review of last PR
|
2016-05-31 15:52:56 -06:00 |
|
neilh10
|
639410849e
|
alarm 10 now runs to completion
|
2016-05-31 14:17:52 -07:00 |
|
Pierre-noel Bouteville
|
39c1e3aba2
|
Allow to not use all channet in a lower part of PWM
|
2016-05-30 11:58:22 -06:00 |
|
Gregory Nutt
|
f65616f872
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 09:16:32 -06:00 |
|
Konstantin Berezenko
|
5c6cd17d46
|
Add support for SPI 4 and 5 on stm32f411 chips
|
2016-05-27 11:08:18 -07:00 |
|
Gregory Nutt
|
3d3b7b5422
|
EFM32, STM32, TIVA: Allow lower half driver to build if any ADC is selected. Should not depend on CONFIG_ADC.
|
2016-05-27 06:46:33 -06:00 |
|
Gregory Nutt
|
31ac3f5123
|
STM32 ADC: Missed on adc_receive
|
2016-05-26 12:42:34 -06:00 |
|
Gregory Nutt
|
8f2a660c8b
|
Add ADC bind method to the STM32 ADC drivers
|
2016-05-26 12:25:54 -06:00 |
|
Gregory Nutt
|
783bab6c82
|
Costmetic changes from review of last PR
|
2016-05-25 18:04:39 -06:00 |
|
Gregory Nutt
|
3603dc6218
|
1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic.
|
2016-05-25 17:56:47 -06:00 |
|
Paul A. Patience
|
d31aefe4ef
|
STM32 CAN: Add support for both RX FIFOs
|
2016-05-25 16:11:18 -04:00 |
|
Gregory Nutt
|
add152bf24
|
Update README
|
2016-05-25 14:07:59 -06:00 |
|
Gregory Nutt
|
4a63a7760a
|
STM32: Hook 1-Wire driver into the build system
|
2016-05-25 12:31:32 -06:00 |
|
Gregory Nutt
|
2a87741e72
|
Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER
|
2016-05-25 10:45:01 -06:00 |
|
Gregory Nutt
|
249a2e48e5
|
Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER
|
2016-05-25 10:39:23 -06:00 |
|
Aleksandr Vyhovanec
|
52c6cb1799
|
Fix typographical naming error in STM32 U[S]ART bit defintiions.
|
2016-05-25 09:04:03 -06:00 |
|
Aleksandr Vyhovanec
|
9a2002a302
|
1-wire driver based on U[S]ART in single-wire, half-duplex mode.
|
2016-05-25 08:59:47 -06:00 |
|
Konstantin Berezenko
|
a2253cdd3e
|
Add basic configuration for stm32f411e-disco board with STM32F411VE chip
|
2016-05-20 16:38:25 -07:00 |
|
Gregory Nutt
|
72de45b7cf
|
Merged in david_s5/nuttx/upstream_to_greg (pull request #21)
Fixed Break changes needed CONFIG_SERIAL_TERMIOS to build
|
2016-05-17 18:09:23 -06:00 |
|
David Sidrane
|
f444f061d6
|
Fixed Break changes needed CONFIG_SERIAL_TERMIOS to build
|
2016-05-17 14:04:51 -10:00 |
|
Gregory Nutt
|
5fc619eb1b
|
Changes from review of last PR
|
2016-05-17 17:39:27 -06:00 |
|
David Sidrane
|
b11f49e7f1
|
Support BSD compatible breaks on stm32 U[S]ART
|
2016-05-17 13:09:34 -10:00 |
|
David Sidrane
|
55d8b0e277
|
Use the correct register and bit to send an STM32 non-bsd compatible break
|
2016-05-17 07:55:33 -10:00 |
|
Gregory Nutt
|
c00e3e55dc
|
Fix several places in DMA logic where a spurious semicolon causes bad conditional logic
|
2016-05-11 17:42:59 -06:00 |
|
Gregory Nutt
|
050f544782
|
Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems.
|
2016-05-05 11:30:47 -06:00 |
|
Marco Krahl
|
8b36a83df1
|
stm32: fix wrong FSCM pin mapping for stm32f42x
|
2016-04-22 07:27:00 -06:00 |
|
Gregory Nutt
|
aa64214877
|
FB: Add a display number to the framebuffer planeinfo structure
|
2016-04-17 10:08:27 -06:00 |
|
Gregory Nutt
|
46846c0c24
|
Framebuffer driver: Add a display number to each interface in order to support multiple displays
|
2016-04-14 12:23:15 -06:00 |
|
Sergei Ustinov
|
8a5bf3c230
|
STM32 DAC output buffers correct enable.
|
2016-04-10 08:51:59 -06:00 |
|
Gregory Nutt
|
b4fc040783
|
RTC: Fix some compile issues when RTC_ALARM is disabled
|
2016-04-04 09:24:06 -06:00 |
|
Gregory Nutt
|
8a076d4c09
|
Eliminate a warning
|
2016-04-04 08:30:03 -06:00 |
|
Gregory Nutt
|
1e4674e535
|
STM32 RTC alarm: Use modifyreg32 for consistency
|
2016-04-04 08:28:01 -06:00 |
|
Gregory Nutt
|
1ea7b48677
|
RTC lower half was missing call to F4 alarm cancel function
|
2016-04-04 08:23:09 -06:00 |
|
Gregory Nutt
|
531b9f6626
|
STM32 RTC alarm: remove some if 0ed out logic.
|
2016-04-04 08:16:53 -06:00 |
|
Gregory Nutt
|
19aa5880e7
|
STM32 RTC Alarm: Add Neil's alarm cancellation logic
|
2016-04-04 08:15:48 -06:00 |
|
Gregory Nutt
|
65dc922a2e
|
STM32 RTC: Fix compile errors for STM32 F1
|
2016-04-03 13:26:29 -06:00 |
|
Gregory Nutt
|
a573617f33
|
Costmetic renaming
|
2016-04-03 12:38:02 -06:00 |
|
Gregory Nutt
|
9f0df8180a
|
STM32 RTC: Fix some errors when RTC debug is enabled
|
2016-04-03 09:52:08 -06:00 |
|
Gregory Nutt
|
6b3b12ee0a
|
STM32 RTC: Move the logic to set a relative alarm from the low level RTC driver up higher into the RTC device driver lower half.
|
2016-04-03 09:22:02 -06:00 |
|
Gregory Nutt
|
e904d98915
|
STM32 RTC: Add implementation of logic to set the alarm relative to the current time
|
2016-04-02 18:17:46 -06:00 |
|
Gregory Nutt
|
a609880839
|
STM32 F4 RTC: Add support for setting alarm via driver
|
2016-04-02 17:38:19 -06:00 |
|
Gregory Nutt
|
0fccd81eff
|
cosmetic update
|
2016-04-02 14:58:01 -06:00 |
|
Gregory Nutt
|
9bc38d19d9
|
RTC: Further simplications of the RTC driver interface; Add sample implementation of alarms for F1
|
2016-04-02 13:54:18 -06:00 |
|
Gregory Nutt
|
5fdefa1aad
|
Minor cleanup of STM32 alarm stuff
|
2016-04-02 13:11:57 -06:00 |
|
Gregory Nutt
|
476301e5a4
|
STM32: Adapt the lower half RTC driver to the new, simplified interface
|
2016-04-02 12:58:47 -06:00 |
|
Neil Hancock
|
5ac54013d2
|
STM32 F4: Add a custom RTC driver
|
2016-04-02 10:46:10 -06:00 |
|
Aleksandr Vyhovanec
|
472115eda9
|
ARMv7-M: Add support for the IAR compiler
|
2016-04-02 08:14:09 -06:00 |
|
Gregory Nutt
|
bd2da2f543
|
ARMv7-M: Add toolchain option to select the IAR tools. Move ARMv7-M assembly language into a gnu/ subdirectory. Makefile selects iar/ or gnu/ directory based upon tool configuration
|
2016-04-02 07:53:52 -06:00 |
|
Aleksandr Vyhovanec
|
29ab0fb991
|
STM32: Add support for the IAR compiler
|
2016-04-02 06:58:55 -06:00 |
|
Gregory Nutt
|
267e20c729
|
PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains.
|
2016-03-27 13:01:32 -06:00 |
|
Gregory Nutt
|
32acc35c88
|
PM: Add activity domain to all PM callbacks
|
2016-03-27 11:18:54 -06:00 |
|
Paul A. Patience
|
2f187f8714
|
STM32 DAC: Fix DMA support for STM32F2xxx and STM32F4xxx
|
2016-03-20 17:26:40 -04:00 |
|
Gregory Nutt
|
51be83aa3a
|
ARM: Fix missing header file. Update comments in all *_irq.c files.
|
2016-03-09 15:08:58 -06:00 |
|
Gregory Nutt
|
4d4f54a789
|
Rename current_regs to g_current_regs; For ARM, g_current_regs needs to be an array to support multiple CPUs
|
2016-03-09 13:41:48 -06:00 |
|
Gregory Nutt
|
52d777fa8d
|
Merged in paulpatience/nuttx-arch/stm32f469 (pull request #56)
STM32: Add support for STM32F46xxx
|
2016-03-01 11:53:07 -06:00 |
|
Gregory Nutt
|
f552aa3ee8
|
Merged in paulpatience/nuttx-arch/stm32f30xxx_pinmap (pull request #55)
STM32: Rename STM32F30xxx ADC pins to be more consistent
|
2016-03-01 11:38:44 -06:00 |
|
Paul A. Patience
|
099990f3da
|
STM32: Add support for STM32F46xxx
|
2016-03-01 12:18:07 -05:00 |
|
Paul A. Patience
|
221b49cf05
|
STM32: Rename STM32F30xxx ADC pins to be more consistent
|
2016-03-01 09:55:59 -05:00 |
|
Gregory Nutt
|
0da57e1b53
|
It is too late to be doing this... Fix the spacing error introduced with the second correction to the spelling error
|
2016-02-24 17:56:40 -06:00 |
|
Gregory Nutt
|
29297da2a7
|
Another spelling error
|
2016-02-24 17:55:30 -06:00 |
|
Gregory Nutt
|
550e0f945b
|
STM32 I2C: Fix some spelling; duplicate I2C reset fix on other variants of the driver
|
2016-02-24 16:45:45 -06:00 |
|
David Sidrane
|
3b871c4fa2
|
No really removed spaces
|
2016-02-24 22:23:39 +00:00 |
|
David Sidrane
|
052b45db0a
|
Added spacing back
|
2016-02-24 22:21:07 +00:00 |
|
David Sidrane
|
aa6968dcd5
|
Ensures frequency is updated on reinitalized bus
|
2016-02-24 12:02:11 -10:00 |
|
Gregory Nutt
|
9c63736c98
|
Standard some naming if code sectino comments
|
2016-02-21 18:06:09 -06:00 |
|
Gregory Nutt
|
441cd2bf1c
|
Fix a typo introduced in last set of name changes
|
2016-02-14 19:58:30 -06:00 |
|
Gregory Nutt
|
8b7dd552a3
|
Fix a typo introduced in last big set of name changes
|
2016-02-14 17:44:45 -06:00 |
|
Gregory Nutt
|
666cc280f4
|
Rename irqenable() to up_irq_enable(); rename irqdisable() to up_irq_disable()
|
2016-02-14 16:54:09 -06:00 |
|
Gregory Nutt
|
83bc1c97c3
|
Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore()
|
2016-02-14 16:11:25 -06:00 |
|
Gregory Nutt
|
70e502adb0
|
Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
|
2016-02-13 19:11:09 -06:00 |
|
Gregory Nutt
|
3caffdd82e
|
Standardization of some naming in preparation for a large automated change
|
2016-02-13 12:57:09 -06:00 |
|
Gregory Nutt
|
a6eb9a351c
|
Add spinlock support for ARMv7-M architectures
|
2016-02-09 13:44:22 -06:00 |
|
Gregory Nutt
|
1166e311b0
|
Networking: Remove the HSEC argument from devif_timer.
|
2016-02-03 11:17:15 -06:00 |
|
Gregory Nutt
|
d2b2cd3415
|
Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS
|
2016-02-03 10:33:22 -06:00 |
|
Manuel Stuehn
|
7236e742ab
|
STM32 Ethernet: Fix a cornercase where the TX poll timer is not restarted.
|
2016-02-03 08:24:49 -06:00 |
|
Gregory Nutt
|
1e4f2ae2c1
|
Rename up_i2c initialize and uninitialize functions using the correct MCU-specific naming
|
2016-02-02 12:08:23 -06:00 |
|
Gregory Nutt
|
d2571985ef
|
I2C: up_i2creset should not be a global function; Now it is an I2C interface method
|
2016-02-02 11:21:45 -06:00 |
|
Gregory Nutt
|
30624c8dfa
|
EFM32, STM32, and Tiva I2C Drivers: Clean up some kruft that is no longer needed after the last massive I2C interfcase change
|
2016-02-01 19:51:55 -06:00 |
|
Gregory Nutt
|
0693e76be8
|
I2C: Remove the setfrequency method from the interface
|
2016-02-01 16:30:29 -06:00 |
|
Gregory Nutt
|
a64f36a63e
|
I2C: Remove setaddress method
|
2016-02-01 12:14:20 -06:00 |
|
Gregory Nutt
|
ce988c7ed3
|
Remove the read and write methods from the I2C interface
|
2016-02-01 09:22:10 -06:00 |
|
Gregory Nutt
|
2171438c61
|
I2C_TRANSFER support is no longer optional
|
2016-01-31 14:00:53 -06:00 |
|
Gregory Nutt
|
531d73af41
|
Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s.
|
2016-01-30 08:35:46 -06:00 |
|
Gregory Nutt
|
9f9b85a932
|
Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h
|
2016-01-30 07:59:44 -06:00 |
|
Freddie Chopin
|
8203659ee5
|
stm32_rtc_endwr(): wait for RTC_CRL_RTOFF bit to be set. This ensures that the write "reaches" RTC registers before access is disabled by stm32_pwr_enablebkp().
|
2016-01-28 16:58:02 -06:00 |
|
Gregory Nutt
|
04bbd8c67f
|
For STM32, rename up_spiinitialize to stm32_spibus_initialize
|
2016-01-26 12:22:27 -06:00 |
|
Gregory Nutt
|
c0fb4e34a7
|
I2C: Eliminate the I2C_WRITEREAD method
|
2016-01-26 10:23:09 -06:00 |
|
Gregory Nutt
|
b7cbbab761
|
Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law
|
2016-01-23 18:10:21 -06:00 |
|
Gregory Nutt
|
4bd6adb725
|
Add dummy hwfeatures method to all SPI interfaces
|
2016-01-23 15:09:38 -06:00 |
|
Gregory Nutt
|
5ebd84c890
|
Update to use 64-bit timer when available
|
2016-01-21 11:53:58 -06:00 |
|
Paul A. Patience
|
3ecdb0c21c
|
STM32 TIM: Fix comment
|
2016-01-19 17:02:00 -05:00 |
|
Gregory Nutt
|
b7e9fb9284
|
Merged in paulpatience/nuttx-arch/stm32_qencoder (pull request #52)
STM32 QEncoder: Fix typo
|
2016-01-19 15:47:07 -06:00 |
|
Paul A. Patience
|
d81001326c
|
STM32 QEncoder: Fix typo
|
2016-01-19 16:44:21 -05:00 |
|
Paul A. Patience
|
26a434d76a
|
STM32 TIM: Fix typos and add forgotten bit
|
2016-01-19 15:49:03 -05:00 |
|
Frank Benkert
|
dd13fcde44
|
CAN: Add more extensive error reporting information
|
2016-01-18 12:21:20 -06:00 |
|
Gregory Nutt
|
74c7e3d0bf
|
STM32 OTF FS/HS Host. Fix two cases where stm32_putreg parameters were backward. Noted by Hang Xu
|
2016-01-18 08:10:37 -06:00 |
|
Paul A. Patience
|
196d379010
|
STM32 QEncoder: Fix some typos
|
2016-01-17 21:52:03 -05:00 |
|
Juha Niskanen
|
8a671d604d
|
stm32/chip: Fix STM32L15 TIM5 base address.
|
2016-01-11 07:25:50 -06:00 |
|
Gregory Nutt
|
ba0f5467d0
|
A few more cosmetic changes
|
2015-12-24 07:38:17 -06:00 |
|
Gregory Nutt
|
376b35be39
|
Mostly cosmetic changes from review for conformance to coding standard
|
2015-12-24 07:35:19 -06:00 |
|
pnb
|
400d06e9ec
|
fix capture bug
|
2015-12-24 12:26:39 +01:00 |
|
pnb
|
709c257a43
|
cosmetic
|
2015-12-24 09:45:02 +01:00 |
|
pnb
|
e22d8aea5d
|
add oter timer
|
2015-12-24 09:42:33 +01:00 |
|
pnb
|
cfe9555e24
|
capture start to works need test it more
|
2015-12-23 19:07:45 +01:00 |
|
pnb
|
54b275ec09
|
Merge branch 'master' of bitbucket.org:pnb990/nuttx-kernel-arch
|
2015-12-22 16:32:19 +01:00 |
|
pnb
|
9cc2119c4e
|
capture compile
|
2015-12-22 16:28:19 +01:00 |
|
pnb
|
badc0c2215
|
Merge remote-tracking branch 'upstream/master'
|
2015-12-22 13:29:31 +01:00 |
|
pnb
|
0ef3dc81aa
|
Merge branch 'master' of bitbucket.org:pnb990/nuttx-kernel-arch
|
2015-12-22 13:28:39 +01:00 |
|
pnb
|
7d244d4d04
|
Revert "add timer capture STM32"
This reverts commit 7a484f4d7665c533998d6893c21b69340038b5fc.
|
2015-12-22 13:27:42 +01:00 |
|
pnb
|
764c9ea887
|
Revert "used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture"
This reverts commit 08600d05eb12cb4f62280766b7f780e8eaa2284b.
|
2015-12-22 13:27:35 +01:00 |
|
pnb
|
573462e355
|
Revert "continue capture integration"
This reverts commit c0b6ba73d59dc973d6984bce12ff4a20d870de2a.
|
2015-12-22 13:27:00 +01:00 |
|
pnb
|
406bc5e67e
|
continue capture
|
2015-12-22 13:26:22 +01:00 |
|
Gregory Nutt
|
3e4fb7a60d
|
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #42)
STM32 ADC: Add DMA support for STM32F30xxx
|
2015-12-22 05:45:10 -06:00 |
|
pnb
|
f88e62c8e9
|
continue capture
|
2015-12-22 12:21:03 +01:00 |
|
Paul A. Patience
|
754a4ddb98
|
STM32 ADC: Add DMA support for STM32F30xxx
|
2015-12-22 03:42:37 -05:00 |
|
pnb
|
510dc7872d
|
Merge remote-tracking branch 'upstream/master'
|
2015-12-20 13:00:17 +01:00 |
|
pnb
|
2f78c0c1bc
|
continue capture integration
|
2015-12-20 12:54:21 +01:00 |
|
Gregory Nutt
|
727f0f47d6
|
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #40)
STM32 PWM: Fix timer type bug
|
2015-12-18 18:47:41 -06:00 |
|
pnb
|
e25bc48d01
|
used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture
|
2015-12-16 23:42:43 +01:00 |
|
pnb
|
701c386299
|
add timer capture STM32
|
2015-12-16 21:39:51 +01:00 |
|
Gregory Nutt
|
1cd73ec861
|
Merged in paulpatience/nuttx-arch/stm32_qencoder (pull request #41)
STM32 QEncoder: Add support for STM32F30xxx
|
2015-12-15 14:13:44 -06:00 |
|
Paul A. Patience
|
377d29f1a1
|
STM32 QEncoder: Add support for STM32F30xxx
|
2015-12-15 12:13:37 -05:00 |
|
Gregory Nutt
|
26883fc7b9
|
Merged in paulpatience/nuttx-arch/stm32_tim (pull request #39)
STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes
|
2015-12-14 16:59:51 -06:00 |
|
Paul A. Patience
|
b7e8e1fb99
|
STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes
|
2015-12-14 17:24:11 -05:00 |
|
Paul A. Patience
|
7274084540
|
STM32 PWM: Fix timer type bug
|
2015-12-14 17:21:55 -05:00 |
|
Gregory Nutt
|
dfec6a0dd0
|
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
|
2015-12-14 13:56:21 -06:00 |
|