sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,571 Commits 1 Branch 0 Tags 291 MiB
5158e10bc2
Commit Graph

3556 Commits

Author SHA1 Message Date
Gregory Nutt
2763da5ddd EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks 2014-10-22 07:26:31 -06:00
Gregory Nutt
f06890c931 Add ARMv7-M DWT and TPI register definitions 2014-10-21 16:46:26 -06:00
Gregory Nutt
c447bb7537 Add CMSIS ITM header file and library 2014-10-21 16:16:00 -06:00
Gregory Nutt
3591729d17 EFM32: Add buton interrupt handling for the Olimex board 2014-10-21 13:51:30 -06:00
Gregory Nutt
b965c7e8f4 The olimex-efm32g880f128-stk now defaults to use LEUART1 as the serial console. Also fixes lots of compile bugs from the original LEUART checkin 2014-10-21 11:38:51 -06:00
Gregory Nutt
e7fe3882a6 EFM32: Add LFA and LFB clock support 2014-10-21 10:45:33 -06:00
Gregory Nutt
6cf07c2a0e EFM32: Add configuration support for LEUARTs 2014-10-21 09:37:02 -06:00
Gregory Nutt
1640ee9108 EFM32: Add a LEUART-based serial driver (untestee) 2014-10-21 09:21:03 -06:00
Gregory Nutt
58f6b696f6 EFM32: Add basic, low-level support for the low energy UARTs 2014-10-21 08:48:38 -06:00
Gregory Nutt
994dbda075 EFM32: Addred LEUART register definition header file 2014-10-21 08:11:03 -06:00
Gregory Nutt
94270a0229 Add ADC pinmap definitions for the STM32 F103R from Lederhilger Martin 2014-10-21 06:48:16 -06:00
Gregory Nutt
23db8a44c3 Fixe to allow compile of lpc43_gpioint.c. It likely doesn't work. From Brandon warhurst_002 2014-10-21 06:36:27 -06:00
Gregory Nutt
d2cf8395f9 stm32: rename spi frame format definition 
This renames the stm32 spi frame format definition to the short description
name as well as the other cr2 register flags.

Note! STM32_SPI3_FRF was never used by nuttx somewhere

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
 2014-10-20 15:12:59 -06:00
Gregory Nutt
ebf9bce9d8 EFM32: Another update to USART oversampling calculation. Clip to positive; update comments 2014-10-20 13:54:43 -06:00
Gregory Nutt
1a77fbcaca Fix some naming 2014-10-20 12:29:28 -06:00
Gregory Nutt
260238aa8a EFM32 USART: Fix oversampling selection; Should be biased toward higher oversampling rates 2014-10-20 10:54:13 -06:00
Gregory Nutt
75b728498a Finsh USART configuration logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
956fc38fca Add GPIO interrupt logic 2014-10-20 08:12:08 -06:00
Gregory Nutt
33a12dfb84 Trivial, cosmetic typos in comments 2014-10-20 08:12:07 -06:00
Gregory Nutt
1524c67a17 Add EFM32 serial driver 2014-10-19 18:55:44 -06:00
Gregory Nutt
74db6df61f Add some UART configuration logic (still incomplete) 2014-10-19 16:42:15 -06:00
Gregory Nutt
df85772cea Fleshes out GPIO configuration logic 2014-10-19 13:47:52 -06:00
Gregory Nutt
2a7edd7e1c Add GPIO header file + a little bit of GPIO configuration logig 2014-10-19 13:07:52 -06:00
Gregory Nutt
3896f187a6 Basic clock configuration logic 2014-10-19 11:08:56 -06:00
Gregory Nutt
06ac7e3a6f Add MSC header file 2014-10-19 09:59:40 -06:00
Gregory Nutt
f0b13590ac Fix conditional logic in CMU header file 2014-10-19 06:46:35 -06:00
Gregory Nutt
8155730f28 Add frame for EFM32 GPIO logic (empty functions) 2014-10-18 18:40:08 -06:00
Gregory Nutt
ebc8333a0b Fix some incorrect conditional logic 2014-10-18 16:16:57 -06:00
Gregory Nutt
a011c250da Add skeleton lowputc() file for EFM32 2014-10-18 16:16:48 -06:00
Gregory Nutt
4f0b8da33c Add skeleton lowputc() file for EFM32 2014-10-18 16:16:22 -06:00
Gregory Nutt
6b1e87a848 Add EFM32 configuration header file 2014-10-18 16:15:53 -06:00
Gregory Nutt
ae3e75a5aa efm32_vectors.S is not really a HEAD object 2014-10-18 15:32:56 -06:00
Gregory Nutt
9069fc797a Add EFM32 SysTick timer support 2014-10-18 15:27:36 -06:00
Gregory Nutt
de5c451a30 Add empty file for event EFM32 clock configuration logic 2014-10-18 15:22:11 -06:00
Gregory Nutt
1bfec65ac5 More framework for GPIO interrupt support 2014-10-18 14:05:07 -06:00
Gregory Nutt
8d73e56145 Use UART0 for the serial console 2014-10-18 12:47:45 -06:00
Gregory Nutt
21d906db0b Add EFM32 UART/USART header file 2014-10-18 11:13:03 -06:00
Gregory Nutt
c071687ae5 Oops committed the wrong version 2014-10-18 09:46:35 -06:00
Gregory Nutt
6d5c75c2ff Add EFM32 CMU header file 2014-10-18 09:26:56 -06:00
Gregory Nutt
686a29624c Add EFM32 Memory Maps 2014-10-17 16:43:52 -06:00
Gregory Nutt
17399091ed Add GPIO header file and EFM32 Gecko Starter Kit LED support 2014-10-17 14:17:44 -06:00
Gregory Nutt
8eb85ce1f8 More EFM32 files 2014-10-17 12:31:44 -06:00
Gregory Nutt
a45de60aca More EFM32 files and logic 2014-10-17 12:02:32 -06:00
Gregory Nutt
2bafdf3d59 Add EFM32 interrupt vector defintions 2014-10-17 10:34:39 -06:00
Gregory Nutt
895cfe0e7c Add configuration support for the EFM32 Gecko Starter Kit 2014-10-17 09:25:52 -06:00
Gregory Nutt
0aea891272 Enable selection of SPI2 for STM32L15XX in Kconfig. From Jussi Kivilinna 2014-10-16 07:03:23 -06:00
Gregory Nutt
26b42e3f57 Minor update to last Kconfig change 2014-10-15 12:33:37 -06:00
Gregory Nutt
e73b64f5ea Add Kconfig selections for STM32-F4x1RE SPI peripheral 2014-10-15 12:22:04 -06:00
Gregory Nutt
a835387529 Fix file mode on modified files 2014-10-14 15:45:56 -06:00
Gregory Nutt
56841b9e20 Support for the STM32 F411RE from Serg Podtynnyi 2014-10-14 15:42:28 -06:00
Gregory Nutt
7012d13e95 Cosmetic changes to comments 2014-10-10 16:54:47 -06:00
Gregory Nutt
85c75a39b0 Fix a few typos 2014-10-10 11:41:40 -06:00
Gregory Nutt
abc90f0e50 Fix watchdog stop bit usage. From Lazlo 2014-10-10 11:36:50 -06:00
Gregory Nutt
385ac926b6 Fix a typo in the lpc43 makefile, lpc43_usb0dev not lpc31_usb0dev 2014-10-09 17:59:42 -06:00
Gregory Nutt
1b1daeb7ef Correct STM32 RTC EXTI bit definition. From Lazlo 2014-10-09 06:25:07 -06:00
Gregory Nutt
f6004ff6eb Misc changes to get a clean build after all of the syslog changes. There are probably other things still broken 2014-10-08 16:23:48 -06:00
Gregory Nutt
db9901e2f9 Update everything under nuttx/arch to use the corrected syslog interfaces 2014-10-08 12:48:47 -06:00
Gregory Nutt
076a9ffadd Simplification of conditional compilation suggested by pn_bouteville 2014-10-07 15:44:54 -06:00
Gregory Nutt
6ab29cbef9 Remove non-functional vestiges of OTGHS in FS mode (including OTGFS2); try to convert the stm32f429i-disco configuration to use OTGHS instead of OTFHS in FS mode (OTGFS2). But I don't have the boards and can't test 2014-10-07 15:25:31 -06:00
Gregory Nutt
6023219078 Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton 2014-10-07 15:05:30 -06:00
Gregory Nutt
362736b377 Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton 2014-10-07 15:01:42 -06:00
Gregory Nutt
3bb8926f00 Fix some recently introduced typos, build problems, and warnings 2014-10-05 16:58:52 -06:00
Gregory Nutt
48f29ce348 More vfork(): If we get to vfork() via system call, then we need to clone some system call information so that the return form the cloned system call works correctly 2014-09-29 10:59:15 -06:00
Gregory Nutt
2b0c657b1f Fix vfork(). Now that arguments are kept on the stack, the way that arguments are passed from parent to child in vfork() must change. This bug has always been present, but was not visible with the old strdup() way of passing arguments 2014-09-29 10:45:44 -06:00
Gregory Nutt
083e808ad8 This completes the implementation of shared memory support 2014-09-24 09:27:17 -06:00
Gregory Nutt
7e9c8b5926 STM32 CAN correction suggested by Max Holtzberg 2014-09-24 08:23:05 -06:00
Gregory Nutt
327628ca19 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:39:06 -06:00
Gregory Nutt
74bb07eeb4 Build support for platform-specific shared memory logic. Not logic yet in place 2014-09-24 07:38:11 -06:00
Gregory Nutt
238e18cc0a Move include/nuttx/mm.h to include/nuttx/mm/mm.h 2014-09-24 07:29:09 -06:00
Gregory Nutt
25b52a111e Cosmetic 2014-09-23 16:03:52 -06:00
Gregory Nutt
a9864bc100 Extend virtual/physical address conversions to include addresses in shared memory. 2014-09-23 16:03:08 -06:00
Gregory Nutt
cce614c67e Fix some inconsistent field name in struct task_group_s: addrenv should be tg_addrenv. 2014-09-23 16:01:44 -06:00
Gregory Nutt
df26163f1f Add logic necessary to handler remapping of shared memory on contex switches 2014-09-23 13:19:30 -06:00
Gregory Nutt
bc01f422df More NxWM build fixes 2014-09-20 16:47:00 -06:00
Gregory Nutt
1ca6adadfa More naming changes to get the stm3240g-eval/nxterm configuration building again 2014-09-20 15:53:28 -06:00
Gregory Nutt
2eef637ca2 SAMA5D4-EK/nsh: WM8904 support enabled; README updated 2014-09-18 14:29:20 -06:00
Gregory Nutt
e94adf8ff4 Ooops... a file that I forgot to add yesterday 2014-09-17 09:52:07 -06:00
Gregory Nutt
52a1f19023 Fixes to avoid some hang conditions using STM32 CAN 2014-09-17 08:35:03 -06:00
Gregory Nutt
e409b64bdc Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
Gregory Nutt
04f75c42cc Add a sharable version of arm_virtpgaddr() 2014-09-16 16:49:44 -06:00
Gregory Nutt
d936f1a918 First round of changes to get the ELF configuration building again 2014-09-16 15:37:05 -06:00
Gregory Nutt
c20907b86c These files were deleted and moved to a different location (see previos commit) 2014-09-16 13:36:51 -06:00
Gregory Nutt
8058de7874 remove tailing blank line 2014-09-16 13:36:14 -06:00
Gregory Nutt
bd6f7c50e8 Move common/up_signal_dispatch.c to armv6-m, armv7-m, and armv7-a. The armv7-a version needs to be different to handle the case where we are dispatch kernel mode signals when running under a user mode group 2014-09-16 13:35:29 -06:00
Gregory Nutt
8c3fd5a162 Correct stack handling is signal deliver to user processes 2014-09-16 13:33:13 -06:00
Gregory Nutt
ebc10e0237 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:48 -06:00
Gregory Nutt
4a04ea48e4 Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:31:24 -06:00
Gregory Nutt
9879f47bbb Move some share-able logic from sama5/sam_pgalloc.c to armv7-a/arm_physpgaddr.c 2014-09-16 13:29:43 -06:00
Gregory Nutt
4f1ca4cbb7 Partial fix to an cache cleaning problem 2014-09-15 16:04:42 -06:00
Gregory Nutt
35a282bc30 Fix an error in a debug statement 2014-09-15 15:15:57 -06:00
Gregory Nutt
e2952e4088 Eliminate a bug introduced in last checking 2014-09-15 15:10:50 -06:00
Gregory Nutt
d14d3b29bb ARMv7-A: Improvements to assertion output for kernel mode 2014-09-15 15:03:55 -06:00
Gregory Nutt
9aae0adffa If we are configured to use a kernel stack while in SYSCALL handling, then we need to switch back to the user stack to deliver a signal 2014-09-15 11:38:48 -06:00
Gregory Nutt
949cc1b20c Fix a typo in system call when fetching parameter from the stack: regs[REG_PC]+4 is the address, not regs[REG_PC+4] 2014-09-15 10:55:10 -06:00
Gregory Nutt
946b916f69 Initial integration of kernel stack (does not work) 2014-09-14 11:19:34 -06:00
Gregory Nutt
16ddffc941 Add the initial implementation of the process kernel stack logic. Not yet integrated into the main OS logic nor tested. 2014-09-14 09:53:54 -06:00
Gregory Nutt
ffff51c1b1 Rename everything associated with the dynamic process stack to ustack to make room in the name space for a kstack 2014-09-14 09:10:09 -06:00
Gregory Nutt
d956936535 Add logic need to manage a virtualized stack. Not yet incorporated into base OS logic. 2014-09-13 13:45:35 -06:00
Gregory Nutt
5d4f336b1f Move static helper routines from arm_addrenv.c and may them global so that they can be shared both forthcoming stack address environment logic. 2014-09-13 13:17:44 -06:00
Gregory Nutt
f4bcb27962 Add a configuration option for dynamic stack management 2014-09-13 12:25:32 -06:00
Gregory Nutt
fe48417a96 Comsetic updates to comments, debug output 2014-09-12 10:31:58 -06:00
Gregory Nutt
fba35f0c41 ARMv7-A: Modify up_fullcontextrestore() for CONFIG_BUILD_KERNEL. It changed CPSR while in kernel. That will crash is the new CPSR is user mode while executing in kernel space. Fixed by adding a SYS_context_restore system call. There is an alternative, simpler modification to up_fullcontextrestore() that could have been done: It might have been possible to use the SPSR instead of the CPRSR and then do an exception return from up_fullcontextrestore(). That would be more efficient, but I never tried it. 2014-09-12 08:04:27 -06:00
Gregory Nutt
6084fad7e0 Fix logic for returning from exceptions to user-mode contexts 2014-09-11 18:43:30 -06:00
Gregory Nutt
62e608be8c All tasks, even user mode tasks, must start in supervisor mode until they get past the start-up trampoline 2014-09-11 18:42:52 -06:00
Gregory Nutt
4821587509 Update some comments/function headers 2014-09-11 17:15:26 -06:00
Gregory Nutt
401b8543cd Tighten up some ARM assembly language. You can always do better 2014-09-11 15:12:08 -06:00
Gregory Nutt
bd7f16d16a ARMv7-A: Exception register save/restore needs to work a little differently if we support user mode processes 2014-09-11 14:34:10 -06:00
Gregory Nutt
998c5ee0a9 Trivial kernel build related fixes for consistency 2014-09-11 12:35:23 -06:00
Gregory Nutt
1f23ad9bad Misc fixes to repair some of the breakage to the SAMA5D4-EK elf configuration caused by changes for the knsh configuration 2014-09-11 10:31:12 -06:00
Gregory Nutt
442d2adb7a Fix for UART7 and UART8 on STM32 clock enable from Aton 2014-09-11 10:27:40 -06:00
Gregory Nutt
006cf7d745 Add logic to initialize the per-process user heap when each user process is started 2014-09-10 15:55:36 -06:00
Gregory Nutt
2da0392ae2 SAMA5D4-EK: These configurations now use the fixed DRAM mapping for manipulating the page memory pool. 2014-09-10 08:44:09 -06:00
Gregory Nutt
6238e87aaa Add configuration to use the fixed DRAM mapping for the page pool (if available) instead of remapping dynamically to access L2 page tables and page data. Also, add logic in address environment creation to initialize the shared data at the beginning of the .bss/.data process memory region. 2014-09-10 08:41:01 -06:00
Gregory Nutt
8a99c421ff pcDuino: Several fixes so that it still builds after other Cortex-A changes. 2014-09-10 06:24:39 -06:00
Gregory Nutt
aaf190dcf6 ELF relocations. Some relocation types do not have a named symbol associated with them. The design did not account for that case 2014-09-09 16:52:51 -06:00
Gregory Nutt
068115e7d6 SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
Gregory Nutt
8b64dc003e SAMA5D4-EK: In kernel build with address environment, need logic to map user virtual addresses to physical addresses, and vice versa 2014-09-07 19:25:30 -06:00
Gregory Nutt
53bd807186 Fix loop counter... was overrunning a table on larger ELF files 2014-09-07 14:42:04 -06:00
Gregory Nutt
dcc711f3f2 Correct size comparison (pages vs. sections) 2014-09-07 13:47:01 -06:00
Gregory Nutt
3dd3b1f5e2 The 'make export' target needs to bundle up the user C startup file (crt0), not the kernel head object 2014-09-04 13:31:34 -06:00
Gregory Nutt
70e5350942 Mostly cosmetic changes 2014-09-04 10:28:38 -06:00
Gregory Nutt
15e439d6de I love/hate conditional compilation 2014-09-03 11:43:23 -06:00
Gregory Nutt
12775801c9 Add support for delivery of use-mode signals in the kernel build. 2014-09-02 15:58:14 -06:00
Gregory Nutt
aa7efbb52e Restructuring of build to allow use of use-space allocators by kernel logic in the kernel build. 2014-09-02 11:22:09 -06:00
Gregory Nutt
8557f1a1bb Space at the beginning of the process data space is now reserved for user heap management structures. In the kernel build mode, these heap structures are shared between the kernel and use code in order to allocate user-specific data. 2014-09-02 11:21:23 -06:00
Gregory Nutt
4d8367a009 sbrk() need to initialized the memory manager on the first call 2014-09-02 08:05:11 -06:00
Gregory Nutt
31b8137956 There used to be two ways to pass parameters to new tasks, depending upon the configuration: Either (1) argv[] as created as an array with each string strdup'ed. Or (1) argv[] array and strings were created on the stack before the new task was started. Now, there is only one way, way (1). Way (2) might be slightly more compact, but this is not worth carry the complexity of two different ways of doing the same thing. 2014-09-01 15:39:34 -06:00
Gregory Nutt
587520a7d2 Completes the implementation of sbrk() (untested) 2014-09-01 10:46:51 -06:00
Gregory Nutt
4537a905f6 ARMv7 address environment: Static functions not marked static 2014-09-01 08:49:08 -06:00
Gregory Nutt
2fd3413d35 Fix common heap allocation logic, taking into account the kernel build requirements 2014-09-01 07:57:54 -06:00
Gregory Nutt
ec086adfae Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
10ca085b09 Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
fcd7b9336e Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
bcb5a5316e Rename kumalloc to kumm_malloc and kuzalloc to kumm_zalloc for consistency with other naming 2014-08-31 16:24:24 -06:00
Gregory Nutt
1643c35609 Rename kufree to kumm_free for consistency with other naming 2014-08-31 16:15:11 -06:00
Gregory Nutt
31608cd434 Rename kmemalign to kmm_memalign for consitency with other naming 2014-08-31 14:57:31 -06:00
Gregory Nutt
4c01f5c1b7 Clean up some kernel build heap allocation issues. The Cortex-A kernel build now compiles without errors (but cannot link until brk() and sbrk() are implemented). 2014-08-31 12:50:05 -06:00
Gregory Nutt
10aa9ad087 Remove CONFIG_MM_MULTIHEAP. Non-multiheap operation is no longer supported 2014-08-31 10:54:55 -06:00
Gregory Nutt
05b6217876 ARMv7-A: A little more logic and a few more fixes for Cortex-A kernel build 2014-08-31 07:15:46 -06:00
Gregory Nutt
729bc9f9a7 Various changes/fixes to get configs/stm32f4discovery/kostest working after the big configuration renaming (and after a long period of bit rot) 2014-08-29 16:23:46 -06:00
Gregory Nutt
5fb235c615 Some initial clean-up in verifying the CONFIG_BUILD_PROTECTED configuration change 2014-08-29 15:07:35 -06:00
Gregory Nutt
e11679acf8 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
67721c50f1 Fix hard coded values in dispatch_sysall inline assembly. Back out/corect part of last change; that was going the wrong direction. 2014-08-29 10:10:47 -06:00
Gregory Nutt
48c2c9ed08 Fix a cloned typo 2014-08-29 10:09:07 -06:00
Gregory Nutt
db69d94935 Fix ARM7/9 and Cortex-A SYSCALLs: For threads in SVC mode, the SVC instructions clobbers R14. This must be taken account in the inline assembly 2014-08-29 10:07:11 -06:00
Gregory Nutt
27e463dfaa Various fixes to the ARMv7-A system call logic 2014-08-29 08:24:00 -06:00
Gregory Nutt
8196b629a4 Rename arch/arm/src/armv7-a/syscall.h to svcall.h to work around some include path name collisions; fix some compilation errors in SYSCALL logic when debug is enabled 2014-08-29 07:48:16 -06:00
Gregory Nutt
8dd679e875 ARMv7-A: Add SYSCALL handling logic 2014-08-28 14:52:14 -06:00
Gregory Nutt
cbf0141d6c Add an ARMv7-A system call definition header file 2014-08-28 13:21:36 -06:00
Gregory Nutt
3561aac62a The system call library can now be built with CONFIG_NUTTX_KERNEL. New select: CONFIG_LIB_SYSCALL 2014-08-28 12:09:49 -06:00
Gregory Nutt
4fa5b52e43 Cortex-A address environments: Fix issue with page privileges 2014-08-28 11:00:41 -06:00
Gregory Nutt
26f6d90fa9 Remove a warning 2014-08-28 10:04:41 -06:00
Gregory Nutt
9be4972862 STM32 FLASH fixes: use size_t instead of uint16_t, make interface more generic. From Freddie Chopin 2014-08-28 09:11:20 -06:00
Gregory Nutt
35b11a7533 Fix an error introduced into ALL implmentations of interrupt dispatch logic 2014-08-28 08:41:57 -06:00
Gregory Nutt
8bdde7b2d1 Add address environment support to ALL implementatins of up_release_pending() 2014-08-28 08:10:19 -06:00
Gregory Nutt
1b24afe6fc Add address environment support to ALL implementatins of up_reprioritize_rtr() 2014-08-28 07:54:07 -06:00
Gregory Nutt
0e9a0150ba ARM: Move address environment switch from the task switchers to the interrupt handler. That may save doing the actin multiple times per interrupt 2014-08-28 06:49:05 -06:00
Gregory Nutt
540a7e4a35 ARM: Move address environment switch from the task switchers to the interrupt handler. That may save doing the actin multiple times per interrupt 2014-08-28 06:34:09 -06:00
Gregory Nutt
756054d745 Add ADDRENV support to ALL implmentations of _exit() 2014-08-27 16:31:02 -06:00
Gregory Nutt
7055bce8b4 Add ADDRENV support to ALL implementations of up_unblock_task() 2014-08-27 16:15:46 -06:00
Gregory Nutt
5bf114e604 Add ADDRENV support to all implementations of up_block_task() 2014-08-27 15:36:52 -06:00
Gregory Nutt
8ec74b1a9e Minor address environment clean-up. Cannot generate debug contexts in certain contexts 2014-08-27 14:22:00 -06:00
Gregory Nutt
dd80c63af6 CC3200 Launchpad updates 2014-08-26 16:31:47 -06:00
Gregory Nutt
e3258a3b1f Support the the TC3200 from Jim Ewing 2014-08-26 15:13:57 -06:00
Gregory Nutt
032ff50313 Add up_addrenv_coherent which will be called before address environment switches 2014-08-26 14:53:19 -06:00
Gregory Nutt
d6a4eb6266 up_coherent_dcache should do nothing the the length is zero 2014-08-26 14:51:53 -06:00
Gregory Nutt
e8094292e3 Rename up_addrenv_assign() to up_addrenv_clone() and generalize its arguments so that can be used for other purposes 2014-08-26 12:16:05 -06:00
Gregory Nutt
cb8e081dba Mostly cosmetic use of uintptr_t to hold addresses instead of uint32_t 2014-08-26 10:44:10 -06:00
Gregory Nutt
b1066775a2 Fix confusion about what is a page of data and what is a page of L2 page table; restructure functions to reduce duplicated logic 2014-08-26 10:41:43 -06:00
Gregory Nutt
45d0b2c5fb Add lots of debug output 2014-08-26 07:54:43 -06:00
Gregory Nutt
b3473bfa26 Cortex-A address environment: Fix some section mapping and address increments 2014-08-26 06:33:26 -06:00
Gregory Nutt
a593729cb2 ARMv7-A: Use of write back might be unpredictable 2014-08-25 16:34:22 -06:00
Gregory Nutt
cfa8174fe4 Bugfixes.. still integrating SAMA5 ELF with address environment 2014-08-25 15:27:58 -06:00
Gregory Nutt
9857f09baf SAMA5 ELF configuration with address environments finally builds without errors 2014-08-25 13:59:02 -06:00
Gregory Nutt
699a54a022 Misc changed to get the SAMA5 ELF configuration with address environments working 2014-08-25 13:28:13 -06:00
Gregory Nutt
8907616478 Cortex-A/SAMA5 address environment support is code complete (untested) 2014-08-25 11:18:32 -06:00
Gregory Nutt
2566ba7b1d Change naming of ELF interfaces from arch_ to up_ for consistency 2014-08-25 06:47:14 -06:00
Gregory Nutt
1f5813a763 After cached related fix, the ELF example is now functional 2014-08-24 14:12:45 -06:00
Gregory Nutt
839e206a4a Modify ADDRENV Kconfigs. Z180 does not need all of the virtual address settings that the ARM does 2014-08-24 12:54:37 -06:00
Gregory Nutt
dde84a0a20 addrenv interface changes: up_addrenv_create() may need to create .text and .bss/.data separately because of differing access privileges (read/execute vs read/write). And, as a consequence, up_addrenv_vaddr() needs to be split into up_addrenv_vtext(0 and up_addrenv_vdata(). 2014-08-24 11:54:14 -06:00
Gregory Nutt
95c79c675c Add addrenv.h; First cut at Cortex-A address environment structures; Add configuration options to setup address enviornment 2014-08-24 09:57:53 -06:00
Gregory Nutt
66abb71c57 Change CONFIG_ADDRENV to CONFIG_ARCH_ADDRENV; change how it is selected -- the architecure must first declare support 2014-08-24 06:42:11 -06:00
Gregory Nutt
41196945d6 ARMv7-A: Add skeleton environment and build support for process address environments 2014-08-23 18:59:24 -06:00
Gregory Nutt
01566dd322 STM32 serial: MAke uart_devs[] const. From Freddie Chopin 2014-08-22 16:20:52 -06:00
Gregory Nutt
52b3735310 Recent STM32 UART change: Wasn't that logic backward? Shouldn't that have been disable the USART if (1) we don't have than many USARTs OR (2) we don't have that particular USART -- not AND. 2014-08-22 16:16:23 -06:00
Gregory Nutt
b01d3e396e STM32 F401: Only 3 USARTS, but need to set STM32_NUSARTS to six because they are not numbered sequentially 2014-08-22 09:02:58 -06:00
Gregory Nutt
033de28cfa STM32 F401: Correct support for USART6 on this chip. From Freddie Chopin 2014-08-22 06:49:16 -06:00
Gregory Nutt
2bc16b2ba5 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
96e1bf0ec2 NSH link management now works! The last fix was to the Ethernet drivers: They cannot disable clocking to the Ethernet blok on ifdown. Otherwise, we cannot communicate with the PHY 2014-08-17 17:54:46 -06:00
Gregory Nutt
754541a381 Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
2fab4eaa5a In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts) 2014-08-17 13:03:18 -06:00
Gregory Nutt
e0ef5a08bc For all SAM Ethernet, need to enable management interface before reading PHY regisers in IOCTL 2014-08-17 11:09:54 -06:00
Gregory Nutt
2edcca009c SAM3/4 Ethernet: Clone ioctl support from the SAMA5 2014-08-17 06:54:37 -06:00
Gregory Nutt
4c90c03028 Use the device name assigned by the registration process, not our best guess 2014-08-16 15:14:39 -06:00
Gregory Nutt
8f6f564971 More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic 2014-08-16 15:04:09 -06:00
Gregory Nutt
329ae8024d Implement all network ioctls, including the new ioctl to setup PHY event notifications. 2014-08-16 14:09:14 -06:00
Gregory Nutt
85070e057e Modified to support the change to the network ioctl signature changes. Also add support for new ioctl to setup PHY event notifications. 2014-08-16 14:08:58 -06:00
Gregory Nutt
74735bb495 Fix conditional compilation error 2014-08-12 10:00:58 -06:00
Gregory Nutt
511d7bb38a Adds support for localtime. From Max Neklyudov 2014-08-12 06:18:22 -06:00
Gregory Nutt
1474a56014 Fix a computation error in the fix for the last computational error 2014-08-11 12:07:49 -06:00
Gregory Nutt
304b3b547c Correct time conversion, 1000000 not 1000 to convert seconds to microseconds. 2014-08-11 11:14:10 -06:00
Gregory Nutt
6e7cb4be58 Comment out reassessment of timer in the middle of context switches. Need to revisit 2014-08-11 07:05:47 -06:00
Gregory Nutt
bb1213ab89 SAMA5 Tickless: Corrects some logic errors with timer/counter frequency 2014-08-10 19:04:18 -06:00
Gregory Nutt
bffc875d2e Cosmetic 2014-08-10 16:09:45 -06:00
Gregory Nutt
a2ee73235d Cosmetic changed, updated README files, improved comments 2014-08-10 13:11:31 -06:00
Gregory Nutt
77d49f50e0 Don't try to return time remaining if the timespec pointer is NULL 2014-08-10 11:39:16 -06:00
Gregory Nutt
9a4e1f6fdd Move TC debug options to one file 2014-08-10 11:38:44 -06:00
Gregory Nutt
33965a21e3 Update comments 2014-08-10 11:38:08 -06:00
Gregory Nutt
42b1bcdf33 SAMA5: Fix bugs in timer/counter interrupts and one-shot timer 2014-08-10 10:47:38 -06:00
Gregory Nutt
9cb0b680ac SAMA5 Timer/counter repair: Missing sem_post() caused a hang 2014-08-09 18:34:52 -06:00
Gregory Nutt
c61ec08ee8 SAMA5: Use the one-shot and free-running timers to implement tickless OS support for SAMA5 2014-08-09 17:14:51 -06:00
Gregory Nutt
19ee65ac3e SAMA5 free-running timer: Add support for a free-running timer wrapper around the low-level timer/counter logic. 2014-08-09 16:43:48 -06:00
Gregory Nutt
f9601b6801 SAMA5 oneshot: Some clean-up and correction to the initial implementation 2014-08-09 16:42:04 -06:00
Gregory Nutt
e4981b09d9 SAMA5 timer/counter: Add support for a one-shot timer wrapper around the low-level timer/counter logic. This also involved several changes that rippled into the ADC driver (untested). 2014-08-09 15:27:55 -06:00
Gregory Nutt
c7662e3f92 SAMA5 T/C: Can now handle non-constant BOARD_MCK_FREQUENCY. Also now supports methods to attach user interrupt handlers 2014-08-09 10:30:45 -06:00
Gregory Nutt
6455f60c60 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
4dc151097e Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
c98ece6bec Move task control files from sched/ to sched/task 2014-08-08 16:44:08 -06:00
Gregory Nutt
1c99d53bb1 Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
192f82f380 Move interrupt dispatch logic from sched/ to sched/irq 2014-08-08 14:31:15 -06:00
Gregory Nutt
39183d37b8 Change all time conversions. Yech. New timer units in microseconds breaks all existing logic that used milliseconds in the conversions. Something likely got broken doing this, probably because I confused a MSEC2TICK conversion with a TICK2MSEC conversion. Also, the tickless OS no appears fully functional and passes the OS test on the simulator with no errors 2014-08-07 18:00:38 -06:00
Gregory Nutt
594083d870 Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined. 2014-08-06 16:26:01 -06:00
Gregory Nutt
d4a29fcf7e SAMA5D3 HSMCI: TX DMA is again disabled 2014-08-05 07:07:39 -06:00
Gregory Nutt
553a16fac5 SAMA5 PCK: Add Main clock as an option for the PCK clock source 2014-08-03 10:17:50 -06:00
Gregory Nutt
1fc8f2b06d SAMA5 SSC: Verify that the requested bit width is supported. Correct some alignment tests that depend upon the data bit width. 2014-08-02 14:26:49 -06:00
Gregory Nutt
715cf207ea SAMA5 WM8904: Fix errors in programmable clock output configuration 2014-08-01 15:18:58 -06:00
Gregory Nutt
5e92347d60 SAMA5 SSC: Start Delay is now configurable 2014-08-01 14:10:37 -06:00
Gregory Nutt
d68a6059e0 SAMA5 SSC: Frame Synch Delay is now configurable 2014-08-01 12:25:31 -06:00
Gregory Nutt
c2c2921901 SAMA5D SSC: Needs to account for data offset in audio buffer. 2014-07-31 19:14:24 -06:00
Gregory Nutt
513329fd24 SAMA5D3X-EK: Add support for the WM8904 audio CODEC 2014-07-31 11:14:57 -06:00
Gregory Nutt
ffcc0b8da3 SAMA5: Changes needed for a clean SAMA5D3 build after all of the recent SAMA5D4 changes. 2014-07-31 11:09:56 -06:00
Gregory Nutt
c0c4cda763 SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller. 2014-07-30 11:20:06 -06:00
Gregory Nutt
611ea42dbf SAMA5D HSMCI: Fix a problem on card insertion/removal callback handling. Interrupts were being disable so that the callbacks occurred with interrupts disabled. This resulted in loss of some interrupts and some not-so-good behaviors. The solution is to perform all callbacks on the work thread unconditionally (2014-7-29). 2014-07-30 10:19:41 -06:00
Gregory Nutt
059812c872 SAMA5D HSMCI: Add method to do RX transfer without DMA. The 8-byte SCR transfer was failing silently with the DMA transfer, leaving the SD card in single bit mode 2014-07-29 21:13:28 -06:00
Gregory Nutt
e053158f95 SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK 2014-07-29 07:12:36 -06:00
Gregory Nutt
29ea8ab0e4 Cosmetic changes to comments 2014-07-29 07:11:16 -06:00
Gregory Nutt
42a975af74 Fixes to last SAMA5 PMIC checkin 2014-07-28 17:09:37 -06:00
Gregory Nutt
99927e918d LPC17xx: DC updates from Max. Also fixes some syntax errors that I introduced in the last commit. 2014-07-28 07:23:49 -06:00
Gregory Nutt
dd4be66f1c ARM: Move L2 cache initialization to much later in the sequence 2014-07-27 10:03:33 -06:00
Gregory Nutt
b57d2182ab ARMv7-A L2 Cache currently depends on EXPERIMENTAL because it does not yet work properly 2014-07-26 18:48:54 -06:00
Gregory Nutt
6f5280d284 ARMv7 L2 Cache: Minor bugfixes/improvements 2014-07-26 18:48:26 -06:00
Gregory Nutt
ee59870325 Enables cache early in boot-up sequence 2014-07-26 18:48:00 -06:00
Gregory Nutt
4e146d2ec2 Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled 2014-07-26 18:47:33 -06:00
Gregory Nutt
873788bf5a New cache.h file. Renames cp15_XYZ_cache() to arch_XYZ_cache() and addes L2 cache support if L2 cache is enabled 2014-07-26 18:46:52 -06:00
Gregory Nutt
2eb526253b Rename ARMv7-A cache.h to cp15_cache.h. Things will be broken on this commit until I get the new cache.h in place. 2014-07-26 16:54:19 -06:00
Gregory Nutt
6d9ca195ee arch/arm/src/armv7-a/arm_l2cc_pl310.c, l2cc.h, l2cc_pl310.h, Kconfig: Add initiali support for the ARM L2CC-PL310 L2 cache. 2014-07-26 16:50:08 -06:00
Gregory Nutt
fcbf89c6f6 ARMv7-A: L2CC PL310 address filtering is an optional feature 2014-07-25 19:46:09 -06:00
Gregory Nutt
a007fa3f5e ARMv7-A: Add missing L2CC PL310 bit definitions 2014-07-25 19:41:35 -06:00
Gregory Nutt
e74f37445b rch/arm/armv7-a/l2cc_pl310.h: Move arch/arm/sama5/chip/sam_l2cc.h to arch/arm/armv7-a/l2cc_pl310.h. Adjust the two corresponding Kconfig files as well. 2014-07-25 17:25:17 -06:00
Gregory Nutt
2ec0ab3b5e 3rd time is a charm. Max is right, the initial priority setting should be NVIC_SYSH_PRIORITY_MIN 2014-07-24 16:51:07 -06:00
Gregory Nutt
1366ce0a02 Oops, should have been NVIC_SYSH_PRIORITY_DEFAULT 2014-07-24 16:42:15 -06:00
Gregory Nutt
a3d20b2fa1 LPC17 Ethernet: Added option to use the kernel worker thread to do most of the workload with CONFIG_NET_WORKER_THREAD option in Kconfig. Eliminated a problem with PHY DP83848C : it doesn't need a specific initialization on mbed. Critical bufix: From time to time (after some hours) the Ethernet receiver would lose one receive interrupt and the IP stack never recover because there is no receive watchdog as the transmit watchdog. From Max 2014-07-24 16:39:18 -06:00
Gregory Nutt
dd74e75d1e Added burstmode ADC conversion mode, with CONFIG_ADC_BURSTMODE option in Kconfig. From Max 2014-07-24 16:23:31 -06:00
Gregory Nutt
21d67c5b1b Mostly cosmetic changes from Max 2014-07-24 16:00:21 -06:00
Gregory Nutt
43a578d2d3 Eliminate warnings. From Max 2014-07-24 15:50:37 -06:00
Gregory Nutt
5e19807250 Correct the initial value of the BASEPRI register. This was apparently never being initialized. From Max 2014-07-24 15:37:13 -06:00
Gregory Nutt
949e002d76 Fix a recently introduced typo that was being masked by some bad conditional compilation 2014-07-22 11:45:14 -06:00
Gregory Nutt
d57c3b4e82 Update ChangeLog 2014-07-22 07:25:01 -06:00
Gregory Nutt
45c03e5a1a STM32 OTGFS device: Various changes to try to reduce that amount of time in interrupts handles and with interrupts disbled. Needs verification on other platforms. From Petteri Aimonen 2014-07-22 07:23:17 -06:00
Gregory Nutt
615b7d6c7a Fix typos in the STM32 DAC header file. From Petteri Aimonen 2014-07-22 07:13:33 -06:00
Gregory Nutt
af8f5f4bdc SAMA5D4 XDMAC: Never sets a channel as secure. Will probably have to revisit this 2014-07-21 17:46:35 -06:00
Gregory Nutt
4ce2e094ba SAMA5D4: Fix some HSMCI issues when XDMAC0 is enabled 2014-07-21 17:45:48 -06:00
Gregory Nutt
80c0b5628d SAMA5 HSMCI: Correct multi-block DMA setup; Fixes related to DMA timeout. Still problems with HSMCI DMA via XDMAC 2014-07-21 16:49:56 -06:00
Gregory Nutt
519c8f3e97 SAMA5 XDMAC: Missing some CUBC bits 2014-07-21 16:47:16 -06:00
Gregory Nutt
2d69c2f519 SAMA4D5 HSMCI: Set burst size to 1, sample DMA registers on timeout, and don't return from transfer until BOTH the HSMCI transfer and DMA complete 2014-07-21 13:24:55 -06:00
Gregory Nutt
c5b58b189c XDMAC register sampling missed CIM register; Should not set SWREQ bit in DMA setup 2014-07-21 13:23:36 -06:00
Gregory Nutt
35ea8f1542 Fix a commented out assertion 2014-07-20 17:06:55 -06:00
Gregory Nutt
b207138be9 Fix typos in comments 2014-07-20 13:09:47 -06:00
Gregory Nutt
7ba2d9ed36 SAMA5D4-EK: PIO Schmitt trigger logic backward 2014-07-20 13:04:30 -06:00
Gregory Nutt
9392953ea1 WM8904 w/NxPlayer: Fix some compile errors and warnings with debug enabled 2014-07-20 09:17:36 -06:00
Gregory Nutt
7c56185006 SAMA5D ADC: Fix some typos in conditional compilation 2014-07-19 13:56:48 -06:00
Gregory Nutt
3c29703c42 SAMA5 SCK: The SAMA5D3 does things a little differently 2014-07-19 13:55:53 -06:00
Gregory Nutt
e82143ac38 SAMA5 PCK: Add support for the slow clock as the PCK clock source 2014-07-19 13:55:08 -06:00
Gregory Nutt
8986bd3976 SAMA5: Update slow clock logic. Things work a little differently on the SAMA5D3 2014-07-19 13:25:59 -06:00
Gregory Nutt
813eade679 SAMA5: Add slow clock support 2014-07-19 13:07:55 -06:00
Gregory Nutt
c7055a4cb8 SAMA5D4-EK: Add WM8904 initialization logic 2014-07-19 11:58:53 -06:00
Gregory Nutt
8055a59d49 SAMA5 LCDC: Back out the delay kludge. Increase the LCDC input clock from MCK to 2*MCK was sufficient for all timing instbility problems 2014-07-12 11:24:14 -06:00
Gregory Nutt
424d47cfee SAMA5D4-EK LCDC: Change source clock to 2*Mck seems to solve stability issues 2014-07-12 09:45:05 -06:00
Gregory Nutt
30603b1021 SAMA5D4-EK LCDC: Adding a delay after enabling the LCD solves lots of start-up timing issues 2014-07-12 08:05:22 -06:00
Gregory Nutt
20493f1212 Lpc17xx Ethernet: Comment out an assertion that is reported to first inappropriately. From Max 2014-07-11 12:25:11 -06:00
Gregory Nutt
67468408ae SAMA5D4-EK LCD: Actual hardware with appears to be RGB888 2014-07-10 12:23:41 -06:00
Gregory Nutt
c7d53cb927 SAMA5D4-EK: LCDC works (with a few color problems) 2014-07-10 12:03:10 -06:00
Gregory Nutt
6563ae07c2 Don't have to set SDA high initially in I2C reset because that is done by the pin configuration 2014-07-09 17:17:32 -06:00
Gregory Nutt
fc973eb512 SAMA5 PIO: Fix a typo in Schmitt trigger configuration; Configure pin as a a vanilla input first so that final pin configuration is more read-able (i.e., easier to debug) 2014-07-09 17:16:43 -06:00
Gregory Nutt
0d4255257d SAMA5 I2C Reset: More changes... still does not work right 2014-07-09 15:09:06 -06:00
Gregory Nutt
c1ca11331d SAMA5 TWI: Some restructured needed by up_i2creset. Also timeout needs to vary with the size of the transfer and if debug is on or not 2014-07-09 13:39:10 -06:00
Gregory Nutt
ee351dc695 Use sam_pio_forceclk() so that we can read the current state of an open-drain output in the TWI reset logic. 2014-07-09 11:31:21 -06:00
Gregory Nutt
c4b9eaa01f Add a new interface sam_pio_forceclk() that can be used to force PIO clocking on. I am afraid I was too conservative with PIO clocking in the initial design; this is the price 2014-07-09 11:26:07 -06:00
Gregory Nutt
6c4f57b0dc SAMA5 TWI: Add support for up_i2creset 2014-07-09 09:51:28 -06:00
Gregory Nutt
446d9daa94 SAMA5D4 LCDC: Adapt the SAMA5D3 LCDC driver to work with the SAMA5D4 which has no hardware cursor 2014-07-08 12:45:16 -06:00
Gregory Nutt
8bc8a86b90 SAMA5D3/4 HEAP: Add a configuration option to reserve DRAM for a framebuffer when executing out of DRAM. 2014-07-08 12:43:38 -06:00
Gregory Nutt
3fe95f83de Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
14c90921b3 SAMA5D3/4: Fix two issues associated with PIO interrupts 2014-07-07 14:16:29 -06:00
Gregory Nutt
ae95f4e4d2 SAMA5D3/4 I2C: Test for read or write operation was reversed. How could this have worked before? 2014-07-07 09:54:43 -06:00
Gregory Nutt
194f9721f7 SAM3/4: Fix compile of sam_aes.c if CONFIG_CRYPTO_AES is defined. rom Max Nekludov 2014-07-07 08:03:18 -06:00
Gregory Nutt
56629f7fde maXTouch: Fix test of I2C_TRANSFER return value 2014-07-06 08:51:38 -06:00
Gregory Nutt
87055cff08 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
d7fe256821 NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
99ce3a44d7 Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
11e3a21411 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
77439f3c75 AMA5 OHCI: Pointers to allocated port values were not being nullified after being deallocated. This caused some assertions when debug was enabled 2014-07-04 08:17:14 -06:00
Gregory Nutt
1211bbd904 Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
Gregory Nutt
ca1d7d0f32 Correct authorship on a few files 2014-07-03 18:28:26 -06:00
Gregory Nutt
2bd5963622 SAMA5 OHCI: Fix an error in a DEBUGASSERT statement. Caused assertion to fire inappropriately when a low- or full-speed device is removed and CONFIG_DEBUG=y 2014-07-03 13:06:28 -06:00
Gregory Nutt
8b2fb4725b SAMA5D3/4: UPLL divisor to generate 48MHz for OHCI is different from the two families. No idea why. 2014-07-03 12:28:11 -06:00
Gregory Nutt
68f83f973e CCM PROCFS: Changed the configuration a bit. I am still not happy about the coupling between procfs, mtd, and now STM32 2014-07-03 08:50:24 -06:00
Gregory Nutt
954048b8e9 Add STM32 CCM heep procfs 2014-07-03 08:18:24 -06:00
Gregory Nutt
7f5ea07329 Move cypto debug definitions to debug.h with other susbsystem-level debug 2014-07-03 07:58:43 -06:00
Gregory Nutt
1c0054114e Beginning of a crypto/ subsystem from Max Neklyudov 2014-07-03 07:42:44 -06:00
Gregory Nutt
4c03534f9c SAM4 AES driver from Max Neklyudov 2014-07-03 07:26:44 -06:00
Gregory Nutt
fb44a97359 SAM Ethernet: Eliminate a warning 2014-07-02 17:35:41 -06:00
Gregory Nutt
596dbc20ef SAMA5D4-EK: NSH should run at 528MHz 2014-07-02 15:31:52 -06:00
Gregory Nutt
30fc821bc8 SAMA5D4-EK: NSH configuration now has TWI0 enabled and supports the I2C tool 2014-07-02 13:51:57 -06:00
Gregory Nutt
a420171a4a SAMA5D4 EMAC: Add a kludge to work around a suspected hardware issue 2014-07-02 12:17:01 -06:00
Gregory Nutt
e7aa949380 SAM3/4 and SAMA5 Ethernet: Fix an error in the function that determines the number of free TX descriptors 2014-07-02 10:40:11 -06:00
Gregory Nutt
f5abca3952 SAMA54D-EK: Don't disable any features in the NSH configuration. Comments updated in several files 2014-07-02 08:54:53 -06:00
Gregory Nutt
313982ba18 NET: Rename XYZ_uiptxpoll to just XYZ_txpoll 2014-07-01 18:41:08 -06:00
Gregory Nutt
a2507acab8 SAMA5D4: Add a configuration option to force EMAC driver debug 2014-07-01 18:00:39 -06:00
Gregory Nutt
289dc6dc71 SAMA5D4: Fix error in EMAC driver (plus related EMAC/GMAC drivers) 2014-07-01 11:22:19 -06:00
Gregory Nutt
621ec21bfd Rename uip_poll->devif_poll and uip_timer->devif_timer 2014-06-30 18:40:41 -06:00
Gregory Nutt
ade8807a61 Rename uip_input to devif_input 2014-06-30 18:11:17 -06:00
Gregory Nutt
c5f2ec1637 Fix typo/compile error introduced with last HSMCI changes 2014-06-30 16:08:29 -06:00
Gregory Nutt
d8f4b29d5f SAM3/4: Important bugfix. Values read from PIO input pins do not change unless clocking to the PIO block is enabled 2014-06-30 14:26:09 -06:00
Gregory Nutt
03f3f8966c SAMA5D3/4: Fix some logic in conversion of physical and virtal DRAM addresses when running out of DRAM 2014-06-30 11:04:34 -06:00
Gregory Nutt
f6a3d4b728 SAMA5D4: Don't touch ISLR unless PIO is configured as an interrupt 2014-06-30 09:17:42 -06:00
Gregory Nutt
3010eddf11 STM32: Add configuration support fort he STM32F103RC. From Kosma Moczek 2014-06-30 08:16:17 -06:00
Gregory Nutt
ed02593af7 STM32: Reorder MCUs in choice menu; remove duplicates. From Kosma Moczek 2014-06-30 08:13:12 -06:00
Gregory Nutt
48e6f0ba78 STM32: Move temperature ranges from chip selection configuration prompts. From Kosma Moczek 2014-06-30 08:09:19 -06:00
Gregory Nutt
bfff6190d0 Unconfigure GPIO pins when closing a serial port to prevent back effects from back-powering on the TX pin. From Kosma Moczek 2014-06-30 08:02:26 -06:00
Gregory Nutt
a095b1b260 Make variable definitions 'static const' when possible to save RAM usage. From Kosma Moczek 2014-06-30 07:39:51 -06:00
Gregory Nutt
c4ace8244d Fix typos in debug statements 2014-06-30 07:38:02 -06:00
Gregory Nutt
ce710bb94a SAMA5 PIO: Add support for secure interrupts; Fix PIO debug output 2014-06-29 17:46:55 -06:00
Gregory Nutt
e681a582a7 SAMA5: Remove kruft in PIO header file 2014-06-29 17:45:42 -06:00
Gregory Nutt
70fa9ad81d SAMA5D4 HSMCI: Fix a compiler in a debug statement 2014-06-29 12:01:08 -06:00
Gregory Nutt
1384148415 SAMA5D4 XDMA: Fix some typos 2014-06-29 11:24:57 -06:00
Gregory Nutt
9fab30e3b5 Fix system bus IDs for SAMA5D4; Don't use explicit PERIPHID_SHIFT for symmetry with memory 2014-06-29 11:24:10 -06:00
Gregory Nutt
d4f27b9e08 SAMA5D: Don't use explicit DMACH_FLAG_MEMPID_SHIFT; it does not exist in the SAMA5D4 2014-06-29 09:52:07 -06:00
Gregory Nutt
7c8c583722 SAMA5: Add configuration to assign an XDMAC channel to an HSMCI 2014-06-29 08:43:46 -06:00
Gregory Nutt
b7fad79a1d SAMA5D4-EK: Updates to get the at25boot configuration building correctly 2014-06-28 09:39:50 -06:00
Gregory Nutt
e4990dda4d Rename uip_driver_s net_driver_s 2014-06-27 16:48:12 -06:00
Gregory Nutt
72d8a6a7ef SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
Gregory Nutt
b26d5d2191 SAM4CM: Add IPC register header file. From Macs N 2014-06-27 12:02:30 -06:00
Gregory Nutt
f8e5e82402 Add support for a network device IOCTL to access PHY registers. Ioctls only implemented for STM32. From Lazlo 2014-06-27 09:30:41 -06:00
Gregory Nutt
6a451baa51 SAMA5D4: Add configuration to redirect all interrupts to the AIC 2014-06-26 11:51:39 -06:00
Gregory Nutt
fd7b06c68e STM32 I2C reset. Add missing GPIO configuration. From Alex D 2014-06-25 16:08:31 -06:00
Gregory Nutt
ff97ad1245 Clean-up packet socket naming 2014-06-25 10:34:52 -06:00
Gregory Nutt
57383ea2f3 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
fae790a6dc Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Gregory Nutt
11896e1481 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
b34a1f1e01 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
00667926a9 Move include/nuttx/net/uipopt.h to include/nuttx/net/netconfig.h 2014-06-24 08:53:28 -06:00
Gregory Nutt
eb340e683f Add support for the LPCXpresso's RTC, ADC, DAC, Timer, PWM, and MCPWM. All form Max 2014-06-23 12:13:52 -06:00
Gregory Nutt
4e3c794363 SAMA5D4: Add missing mappings for the VDEC and L2CC memory regions 2014-06-21 14:25:47 -06:00
Gregory Nutt
4b9666658e Correct type of SAMA5 arm_decodefiq() return value 2014-06-21 10:34:35 -06:00
Gregory Nutt
0a134f0158 Need to enable FIQ in initial task state; Improve H32/64 test in IRQ handling 2014-06-21 09:55:09 -06:00
Gregory Nutt
40b7ddf68e SAMA5: FIQs should be disabled along with IRQs on most exeptions in most configuratinons. arm_decodefiq and arm_decodeirq are mutually exclusive and, hence, can use the same interrupt stack 2014-06-20 18:49:01 -06:00
Gregory Nutt
c68d2532be SAMA5D4: Add support for secure/FIQ interrupts; SAIC supports need to be be enabled unconditionally 2014-06-20 18:16:41 -06:00
Gregory Nutt
8f4f73884b SAMA5D4: Fix MATRIX32 base address 2014-06-20 18:15:13 -06:00
Gregory Nutt
8fb8774c26 SAMA5D4: Minor fixes to get working with SAMA5D3 again 2014-06-20 16:01:45 -06:00
Gregory Nutt
0a2133b57f SAMA5D4: Add partial support for secure interrupt controller (SAIC) 2014-06-20 15:22:00 -06:00
Gregory Nutt
aecddf9b52 SAMA5D4: USART peripheral clock appears to be MCK/2 2014-06-20 11:40:36 -06:00
Gregory Nutt
b31f34cf94 SAMA5D4-EK: Make sure that the H32MX divider is set; correct sense of bit driver red LED 2014-06-20 10:33:33 -06:00
Gregory Nutt
9869c9b50d SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked 2014-06-19 15:52:42 -06:00
Gregory Nutt
c14d80ee25 SAMA5D4: Initial bring-up fixes 2014-06-19 14:16:36 -06:00
Gregory Nutt
902c1342b9 Cosmetic cleanup 2014-06-18 08:24:53 -06:00
Gregory Nutt
e2ede42d14 SAMA5D4: XDMAC driver now compiles error/warning free (still untested) 2014-06-17 16:31:09 -06:00
Gregory Nutt
4b3342fd96 SAMA5D4: More progress on XDMAC driver (still no complete); Also fixes some critical errors in the SAMA5D3 DMA definitions 2014-06-17 13:18:52 -06:00
Gregory Nutt
5d73322dc7 SAMA5D4: Correct MATRIX register addresses 2014-06-14 10:42:53 -06:00
Gregory Nutt
1a236c13de SAMA5D4: Implement SDRAM initialization 2014-06-14 10:42:26 -06:00
Gregory Nutt
9e7eb2d12d SAMA5D4: Fix some memory remapping issues; updates to comments and README files 2014-06-14 08:02:58 -06:00
Gregory Nutt
cf72b05936 SAMA5: XDMAC update (still not complete) 2014-06-13 11:59:44 -06:00
Gregory Nutt
ab79090ce0 SAMA5D4: Initial XDMAC driver logic; initial check-in is little more the the DMAC driver with some name changes 2014-06-12 16:33:04 -06:00
Gregory Nutt
a2cb59cab8 First check-in of Lazlo's PF_PACKET 'raw' socket implementation 2014-06-12 11:52:06 -06:00
Gregory Nutt
a23245781a STM32: Handle setting of USART CR1_M when 8 bits of data plus parity 2014-06-11 15:49:54 -06:00
Gregory Nutt
5009def270 Typo in last SAMA5D4 commit 2014-06-11 13:43:54 -06:00
Gregory Nutt
bb8fd2fa2c SAMA5: Add support for Micrel KSZ8081 PHY 2014-06-11 13:25:59 -06:00
Gregory Nutt
22a36b7af3 SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
288c891ad1 SAMA5D4: Still trying to reconcile Ethernet interfaces 2014-06-11 08:01:48 -06:00
Gregory Nutt
379f516780 SAMA5D3/4: More renaming. Change SAMA5D3 EMAC to EMACA and SAMA5D4 to EMACB so that the configuration and build system can configure them. I might come up with something better later 2014-06-10 17:40:25 -06:00
Gregory Nutt
348e666278 STM32: Expicitly include header file files. From Freddie Chopin 2014-06-10 15:49:48 -06:00
Gregory Nutt
e9aec9fdff SAMA5D4: update MATRIX register definitions for the SAMA5D4 2014-06-10 13:15:29 -06:00
Gregory Nutt
f14775b755 SAMA5D4: Complete MPDDR header file 2014-06-10 11:16:05 -06:00
Gregory Nutt
021122f921 SAMA5D4: Add MPDDRC file (incomplete) 2014-06-10 08:46:14 -06:00
Gregory Nutt
d54b7b733c Move SAMA5D3 MPDDRC definitions to a separate header file 2014-06-10 08:11:31 -06:00
Gregory Nutt
fc343d833a SAMA5D4: Update LCDC header file 2014-06-09 13:27:08 -06:00
Gregory Nutt
3a10623e29 Add logic to select between incompatible SAMA5D3 and SAMA5D4 EMAC header files 2014-06-09 12:24:39 -06:00
Gregory Nutt
48a8ead37b SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently 2014-06-09 12:16:16 -06:00
Gregory Nutt
a72cf5ee76 SAMA5D4: Updated EMAC header file 2014-06-09 11:40:11 -06:00
Gregory Nutt
6fb582d1af SAMA5D4: Add EMAC header file 2014-06-09 11:29:02 -06:00
Gregory Nutt
fa3e843ddc SAMA5D4: More header file changes 2014-06-09 10:07:00 -06:00
Gregory Nutt
78c9fcdfb9 SAMA5D4: update ISI register definition header file 2014-06-09 09:29:23 -06:00
Gregory Nutt
979b732f3b SAMA5D4: Completes PMC modifications for the SAMA5D4 2014-06-09 07:55:51 -06:00
Gregory Nutt
b2de85be4e SAMA5D4: Completes L2CC register definition header file 2014-06-08 19:08:11 -06:00
Gregory Nutt
07df0b41f1 SAMA5D4: Update HSMC register definitions 2014-06-08 16:27:58 -06:00
Gregory Nutt
175193788d SAMA5D4: Update PIO register definitions 2014-06-08 15:35:51 -06:00
Gregory Nutt
140bbdb51f SAMA5D4: Update DBGU header file 2014-06-08 14:37:09 -06:00
Gregory Nutt
b43fa3910a SAMA5D4: Update PWM header file 2014-06-08 14:16:50 -06:00
Gregory Nutt
39cb768969 SAMA5D4: Updated HSMCI header file 2014-06-08 12:49:45 -06:00
Gregory Nutt
04430796c4 SAMA5D4: Update ADC register definition header file 2014-06-08 12:19:05 -06:00
Gregory Nutt
256cd0b34c SAMA5D4: Updated RTC header file 2014-06-08 10:14:36 -06:00
Gregory Nutt
f65a238389 SAMA5D4: Update register definitions; add support for TC2 2014-06-08 09:19:50 -06:00
Gregory Nutt
23557d31bb SAMA5: Add TWI3 support 2014-06-08 08:25:39 -06:00
Gregory Nutt
8e1d1db8d1 Updated SAMA5 SFR header file for the SAMA5D4 2014-06-08 07:48:36 -06:00
Gregory Nutt
3e3d3dff9b SAMA5D4: Add support for UART4 2014-06-08 07:47:56 -06:00
Gregory Nutt
e91c27ca5a SAMA5D4: Update one more register definition header files 2014-06-07 14:40:49 -06:00
Gregory Nutt
bc80629149 SAMA5D4: Update some register definition header files. Many more still to be done 2014-06-07 13:36:46 -06:00
Gregory Nutt
07c731d2bb SAMA5D4: Various changes to get the SAMA4D-EK to build 2014-06-06 15:39:40 -06:00
Gregory Nutt
d13fbcc1fc LPC17: Fix a critical error in GPDMA reported by Lizhuoyi 2014-06-06 11:20:28 -06:00
Gregory Nutt
2d3f0f01a0 LPC23xx: Several fixes for typos from Lizhuoyi 2014-06-06 11:06:19 -06:00
Gregory Nutt
c40c8d1924 SAMA5D4: Add L2CC register definition header file (incomplete) 2014-06-05 14:38:08 -06:00
Gregory Nutt
852cf2ee5b Finishes the SAMA5D4 XDMAC register definition header file 2014-06-04 16:59:41 -06:00
Gregory Nutt
74f95efdfc SAMA5D4: Add beginning of XDMAC register definition header file (incomplete) 2014-06-04 14:40:34 -06:00
Gregory Nutt
77c487b1ed SAMA5D4: Has two XDMA modules 2014-06-04 14:39:52 -06:00
Gregory Nutt
975dc5ec46 SAMA5D4: Let's consistently use the name XDMAC for the SAMA5D4 DMA module 2014-06-04 14:39:29 -06:00
Gregory Nutt
7d6633c2a4 Minor naming fix 2014-06-04 13:35:48 -06:00
Gregory Nutt
5ddcb233cc SAMA5: Add pin mux definitions for the SAMA5D4 2014-06-04 12:58:49 -06:00
Gregory Nutt
0342b3f10b SAMA5: Rename most EMAC definitions to EMAC0 to handle the SAMA5D4 which has to EMAC modules and no GMAC 2014-06-04 12:04:24 -06:00
Gregory Nutt
41032b021b SAMA4D4: Basic framework to support the SAMA4D4. Not yet complete 2014-06-03 17:49:51 -06:00
Gregory Nutt
cc369aa3d6 A few build fixes from last, big ARP relocation change 2014-05-30 12:32:20 -06:00
Gregory Nutt
407e72b300 Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
b3abd30a76 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
3feabec7d5 STM32 RTC: Add retry to initialization logic. Sometime RTC initialization takes longer. From dlsitzer. 2014-05-27 07:10:53 -06:00
Gregory Nutt
c68f9477cf Back out PX4 fixes that were reverted in PX4 repository 2014-05-25 07:53:00 -06:00
Gregory Nutt
5d3479bbec STM32 I2C: Final fixes from Max Kriegleder et al. 2014-05-23 08:42:14 -06:00
Gregory Nutt
8dbc4714c5 Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
9e941f1195 Change bne to bne.n in irqrestore() 2014-05-22 09:01:25 -06:00
Gregory Nutt
bac1ab9a34 Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith 2014-05-20 17:48:39 -06:00
Gregory Nutt
d2e1d8f6ee STM32 lowputc: Fix an error in conditional compilation. From Sami Pelkonen 2014-05-20 08:12:07 -06:00
Gregory Nutt
b77854f245 SAM4E GPIO: Fix some compile errors when CONFIG_DEBUG_GPIO is enabled 2014-05-15 11:41:58 -06:00
Gregory Nutt
947f31f5a9 SAM4E-EK: Ooops.. two touchscreen drivers(?) 2014-05-14 10:56:03 -06:00
Gregory Nutt
5258e8d9e7 Fix one error that I made in the last check-in (there are probably more) 2014-05-14 08:09:08 -06:00
Gregory Nutt
fb774d677c Add an alternate STM32 I2C driver that works around errata in the F103 chip (and maybe others). From Patrizio Simona 2014-05-14 07:48:47 -06:00
Gregory Nutt
697b0d5b61 correct some columnar alignment and spacing 2014-05-13 14:14:57 -06:00
Gregory Nutt
5d35f07278 STM32 I2C: Cosmetic changes in preparation to merge a change 2014-05-13 13:11:10 -06:00
Gregory Nutt
43fd4676da SAM4E: PIO definition clean-up 2014-05-12 18:42:25 -06:00
Gregory Nutt
d9a20861a6 Updated README and comments 2014-05-10 11:36:20 -06:00
Gregory Nutt
fa7c79712e STM32 I2C: Bring in PX4 fix for I2C in very high noise environments or with rogue perpipherals. Taken from the PX4 commit by Tridge 2014-05-10 10:34:05 -06:00
Gregory Nutt
308d0dbe06 Couple of fixes for the latest STM32 additions / modifications. These are simple fixes dealing with conditional compile based on CONFIG items not being set. From Ken Pettit 2014-05-09 06:41:01 -06:00
Gregory Nutt
02bb1d69b8 Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen 2014-05-08 09:20:11 -06:00
Gregory Nutt
af2bb81ac2 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
1cc859405e STM32: Rename pinmap.h files to better reflect the chip naming conventions 2014-05-07 13:05:12 -06:00
Gregory Nutt
6e9df4d5ab STM32: Fix STM32F100CB pin configuration (from Kosma Moczek); and make chip naming a little more consistent 2014-05-07 12:54:27 -06:00
Gregory Nutt
1636d7cb2f Ooops... last (cosmetic) changes were still in the editor 2014-05-06 15:00:39 -06:00
Gregory Nutt
422a9c9bfd Optimized memcpy() functin for the ARMv7-A from David Sidrane 2014-05-06 14:58:48 -06:00
Gregory Nutt
a1871c7045 STM32: Add more complication to STM32 Kconfig so the correct RNG and ETHMAC options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 11:35:13 -06:00
Gregory Nutt
ca31e38f7b Nucleo-F401RE: With these changes and the changes from previous commits, the basic Nucleo-F401RE NSH configuration is working. 2014-05-06 11:07:10 -06:00
Gregory Nutt
acd40e73aa The Nucleo-F401RE has no on-board cystal and, hence, must use the on-chip HSI oscillator for the PLL include clock 2014-05-06 10:01:02 -06:00
Gregory Nutt
bfa9df89e2 STM32: Add more complication to STM32 Kconfig so the correct ADC and CAN options presented for the F401RE. There are still invalid peripheral options being presented 2014-05-06 08:32:21 -06:00
Gregory Nutt
27d3a4962a STM32: Add some complication to STM32 Kconfig so the correct USART and TIM options are presented for the F401RE. There are still invalid peripheral options being presented 2014-05-05 17:59:07 -06:00
Gregory Nutt
f72a873af9 Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00