Gregory Nutt
|
a9b0f304e6
|
Add SAMA5 clock logic. Cloned from SAM3U and not yet verified
|
2013-07-22 14:42:05 -06:00 |
|
Gregory Nutt
|
1350b2a576
|
SAMA5 interrupt handling logic
|
2013-07-22 11:54:39 -06:00 |
|
Gregory Nutt
|
5bbc86f894
|
SAMA5/Cortex-A: Improve irqsave/restore inlines + add irqenable. Add skeleton file for SAMA5 interrupt management. Also change from last commit that was left in the editor
|
2013-07-21 17:08:40 -06:00 |
|
Gregory Nutt
|
87f54f7d0b
|
Add system timer logic for the SAMA5
|
2013-07-21 15:49:17 -06:00 |
|
Gregory Nutt
|
543b5b7e03
|
A few more Cortex-A5 and SAMA5 files
|
2013-07-21 12:52:38 -06:00 |
|
Gregory Nutt
|
66259bfc53
|
Misc Cortex-A5 changes include new file for cache operations
|
2013-07-20 13:06:00 -06:00 |
|
Gregory Nutt
|
b26d5c7164
|
A few more SAMA5D3 files
|
2013-07-19 17:45:28 -06:00 |
|
Gregory Nutt
|
4a81d47c86
|
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
|
2013-07-19 15:23:03 -06:00 |
|
Gregory Nutt
|
5356bd1bbd
|
More ARMv7-A files that are just copies of the ARMv4/5 files for now
|
2013-07-19 11:43:04 -06:00 |
|
Gregory Nutt
|
53a4f3443c
|
Minor but fatal typo introduced in last checkin
|
2013-07-18 15:45:21 -06:00 |
|
Gregory Nutt
|
8f2ad7eec1
|
Some initial frame for Cortex-A5 support. No much yet
|
2013-07-18 15:20:47 -06:00 |
|
Gregory Nutt
|
a7ae91c716
|
NSH cmp command by Andrew Twidgell
|
2013-07-18 08:24:29 -06:00 |
|
Gregory Nutt
|
f9b9bf6e04
|
STM32 SDIO driver: Add supported for data block end (DBCKEND) interrupt. From Chia Cheng Tsao
|
2013-07-08 09:04:05 -06:00 |
|
Gregory Nutt
|
7536b4654b
|
Ticket #16: STM32 OTG FS device driver endpoint allocation. From Chia Cheng Tsao
|
2013-07-08 08:55:05 -06:00 |
|
Gregory Nutt
|
25c393f371
|
prohibit re-entrance into sam_configgpio()
|
2013-07-05 17:15:54 -06:00 |
|
Gregory Nutt
|
94e2f4ceb4
|
Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver
|
2013-07-03 08:12:45 -06:00 |
|
Gregory Nutt
|
f0ebaf8312
|
Several fixes to get a clean compile of the Arduino touch screen
|
2013-07-02 13:52:09 -06:00 |
|
Gregory Nutt
|
09faaccc02
|
Created new directories to hold SPI-related files
|
2013-07-01 08:11:54 -06:00 |
|
Gregory Nutt
|
f01a1517df
|
Update LM FLASH definitions for LM4F120. From Vinti
|
2013-06-29 07:02:56 -06:00 |
|
Gregory Nutt
|
2ba00060bc
|
SAM33/4: Need to disable write protection before modify PIO pin configuration
|
2013-06-28 15:34:51 -06:00 |
|
Gregory Nutt
|
3505ca7556
|
Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general
|
2013-06-28 14:32:08 -06:00 |
|
Gregory Nutt
|
e34e1ee987
|
Arduino Due: Fixes to FLASH address, flash wait states, updated Comments. Now boots and runs a bit before crashing
|
2013-06-28 11:29:14 -06:00 |
|
Gregory Nutt
|
9956392d00
|
With these changes the Arduino Due port builds without errors
|
2013-06-27 15:07:07 -06:00 |
|
Gregory Nutt
|
e0310e2cc8
|
Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system
|
2013-06-27 14:24:27 -06:00 |
|
Gregory Nutt
|
293e46e435
|
Review and update of SAM3/4 header files and conditional logic for SAM3X/A support
|
2013-06-27 11:06:13 -06:00 |
|
Gregory Nutt
|
bc7ac20616
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
Gregory Nutt
|
d4b7efb34e
|
Add SAM3X/3A pin multiplexing and GPIO encoding header files
|
2013-06-26 17:02:43 -06:00 |
|
Gregory Nutt
|
f668abaed1
|
Add SAM3X/3A memory map
|
2013-06-26 14:37:57 -06:00 |
|
Gregory Nutt
|
3692dfaf26
|
Add SAM3X/3A peripheral clock controls
|
2013-06-26 14:00:26 -06:00 |
|
Gregory Nutt
|
b089263e1c
|
Add SAM3X/3A interrupt vectors
|
2013-06-26 12:59:56 -06:00 |
|
Gregory Nutt
|
18240b07b6
|
Add support for SAM3X and 3A chips, interrupts, and peripheral IDs
|
2013-06-26 12:28:32 -06:00 |
|
Gregory Nutt
|
64dd806d89
|
Fix integration of RAM test into the build and configuration system
|
2013-06-26 10:54:12 -06:00 |
|
Gregory Nutt
|
3d1f29217e
|
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
|
2013-06-25 09:13:30 -06:00 |
|
Gregory Nutt
|
8959fffedc
|
SAM4L Xplained SLCD driver is complete
|
2013-06-23 09:05:20 -06:00 |
|
Gregory Nutt
|
5152ce9f79
|
Beginning of a driver for the SAM4L LED1 module
|
2013-06-21 17:42:09 -06:00 |
|
Gregory Nutt
|
add0a67995
|
Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes
|
2013-06-21 09:32:57 -06:00 |
|
Gregory Nutt
|
59e1d1c6cd
|
More KL25Z SPI fixes
|
2013-06-20 19:58:45 -06:00 |
|
Gregory Nutt
|
b14f0cf9f7
|
KL25Z GPIO register dump function now compiles
|
2013-06-20 18:00:56 -06:00 |
|
Gregory Nutt
|
76f9df2941
|
Fix backward wait condition in KL24Z SPI driver
|
2013-06-20 17:39:42 -06:00 |
|
Gregory Nutt
|
d5a0c75bbb
|
Add framework for managing SPI-related discretes on the Freedom KL25Z board.
|
2013-06-20 13:50:16 -06:00 |
|
Gregory Nutt
|
876fcca8f7
|
More Freedom KL25Z changed to and from Alan Carvalho de Assis
|
2013-06-19 20:50:27 -06:00 |
|
Gregory Nutt
|
d8a8679781
|
Fix errors in KL25Z SPI driver reported by Alan Carvalho de Assis
|
2013-06-19 19:32:13 -06:00 |
|
Gregory Nutt
|
2cfeed654a
|
Add SAM4L PDCA register definition file
|
2013-06-19 18:38:31 -06:00 |
|
Gregory Nutt
|
3ed35802ce
|
SPI register definition file updated to include a few differences for the SAM4L
|
2013-06-19 16:03:19 -06:00 |
|
Gregory Nutt
|
2ede49fd6a
|
SAM4L LCDCS register definitions
|
2013-06-19 13:59:47 -06:00 |
|
Gregory Nutt
|
2a2de71b5d
|
Add SPI driver for the Freescale KL25Z
|
2013-06-19 12:10:01 -06:00 |
|
Gregory Nutt
|
f597172733
|
Add SPI register definitions for the Freescale KL25Z
|
2013-06-19 09:56:32 -06:00 |
|
Gregory Nutt
|
69fc11bb71
|
Fix test of NULL pointer in the SAM3/4 SPI driver
|
2013-06-18 12:16:52 -06:00 |
|
Gregory Nutt
|
177a8c0e9b
|
Freescale KL25Z support from Alan Carvalho de Assis
|
2013-06-18 11:20:57 -06:00 |
|
Gregory Nutt
|
39dcedb0f1
|
SAM3/4 SPI phase control (CPHA) is inverted
|
2013-06-18 09:29:55 -06:00 |
|
Gregory Nutt
|
15e846ad1d
|
Corrections to the Kinetis TSI header file from Alan Carvalho de Assis
|
2013-06-18 07:14:05 -06:00 |
|
Gregory Nutt
|
c9f1d1857c
|
SAM3U-EK: Correct polarity of the PENIRQ signal
|
2013-06-16 14:31:18 -06:00 |
|
Gregory Nutt
|
c7fd7a4e27
|
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
|
2013-06-16 10:09:21 -06:00 |
|
Gregory Nutt
|
44fe999aea
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
Gregory Nutt
|
b1afe69591
|
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
|
2013-06-14 08:54:24 -06:00 |
|
Gregory Nutt
|
8ed39d9f29
|
SAM3/4S GPIO interrupt changes
|
2013-06-13 18:53:14 -06:00 |
|
Gregory Nutt
|
9cf942bcb2
|
SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away
|
2013-06-13 16:18:25 -06:00 |
|
Gregory Nutt
|
e26381f0c0
|
SAM3/4: Some minor design improvements to the SAM3/4 serial driver
|
2013-06-13 15:16:52 -06:00 |
|
Gregory Nutt
|
3a351b60e1
|
Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output
|
2013-06-13 13:38:31 -06:00 |
|
Gregory Nutt
|
1f056e3826
|
Add support for a generic windows-based EABI toolchain; Add NX configuration to force default NXTK border colors
|
2013-06-13 11:04:18 -06:00 |
|
Gregory Nutt
|
507bacc6d5
|
Correct border colors for SAM3U-EK border; clean up some comments; make sure that sam_vectors.S is identical to stam32_vectors.S
|
2013-06-12 19:42:39 -06:00 |
|
Gregory Nutt
|
83ecc03d17
|
Remove CONFIG_XYZ_BUILTIN configurations, replace with the single CONFIG_NSH_BUILTIN_APPS. Add SAM3/4 sam_periphclks.h which is just a header file that includes the right header file. Misc SAM3U-EK cleanup
|
2013-06-12 17:32:00 -06:00 |
|
Gregory Nutt
|
535dc49dea
|
Misc updates to SAM3U register definition files for SAM4S compatibility
|
2013-06-12 12:35:48 -06:00 |
|
Gregory Nutt
|
fa45b86b4d
|
SAM4S: Add NSH configuration. Calibrated delay loops. Port now seems fully functional
|
2013-06-12 10:56:42 -06:00 |
|
Gregory Nutt
|
d9cec43398
|
Correct SAM3S-Xplained load address, FLASH wait states, and UART1 pin configuration
|
2013-06-12 08:18:42 -06:00 |
|
Gregory Nutt
|
a2a91bf8d6
|
Use UART1 for the console on the SAM4S-Xplained not USART0
|
2013-06-11 19:24:47 -06:00 |
|
Gregory Nutt
|
1ca5db1ebc
|
Changes for a clean build of configs/sam4s-xplained
|
2013-06-11 17:33:43 -06:00 |
|
Gregory Nutt
|
94a2776337
|
Add configs/sam4s-xplained
|
2013-06-11 16:29:59 -06:00 |
|
Gregory Nutt
|
54c777ef0d
|
SAM4S: Add macros to manage peripheral clocks
|
2013-06-11 15:42:30 -06:00 |
|
Gregory Nutt
|
03698ca7e2
|
SAM4S: Add pin multiplexing definitions
|
2013-06-11 14:32:07 -06:00 |
|
Gregory Nutt
|
ce8b9c0d3c
|
SAM4S: GPIO, chip characteristics, peripheral Kconfig
|
2013-06-11 12:28:31 -06:00 |
|
Gregory Nutt
|
bafe910ce4
|
SAM4S: Add memory map and interrupt logic
|
2013-06-10 16:18:47 -06:00 |
|
Gregory Nutt
|
76867c132e
|
Beginning updates of SAM3U header files o include support for the SAM4S: WDT, SUPC, EEFC, MATRIX, and PMC
|
2013-06-10 11:57:37 -06:00 |
|
Gregory Nutt
|
3938eeeb96
|
SAM4L: Extend interrupt support for the larger number of NVIC interrupts of the SAM4L
|
2013-06-09 13:00:38 -06:00 |
|
Gregory Nutt
|
3eefc08c12
|
SAM4L: Add an NSH configuration and C++ support
|
2013-06-09 11:43:20 -06:00 |
|
Gregory Nutt
|
b24d51c3c7
|
SAM4L: Mic fixes to get the SAM4L Xplained running. The ostest now passes.
|
2013-06-09 10:57:42 -06:00 |
|
Gregory Nutt
|
cc8906e701
|
SAM3U/4L changes to hide differences by clocking in those MCUs
|
2013-06-08 13:50:42 -06:00 |
|
Gregory Nutt
|
88226dd5b1
|
SAM4L: Add USART/UART register definition header files
|
2013-06-08 11:39:06 -06:00 |
|
Gregory Nutt
|
fe868bc8b2
|
SM4L: USB clock configuration and WDT register definition file
|
2013-06-08 09:21:20 -06:00 |
|
Gregory Nutt
|
2d5c249072
|
SAM4L: Add logic to configure FLASH read mode and wait states
|
2013-06-07 18:12:00 -06:00 |
|
Gregory Nutt
|
11f81d3bfa
|
SAM4L: Add logic to enable selected peripherals on power up; Extend configuration so that each peripheral can be selected -- even though the drivers are not yet implemented
|
2013-06-07 14:59:33 -06:00 |
|
Gregory Nutt
|
7207be4f84
|
SAM4L: Add DFLL0 support, add logic to set the power scaling mode, add support for RAM functions
|
2013-06-07 13:26:55 -06:00 |
|
Gregory Nutt
|
5052df2e69
|
Update SAM4L PLL0 logic
|
2013-06-07 10:28:06 -06:00 |
|
Gregory Nutt
|
f4954c743d
|
Add logic to enable SAM4L clocks
|
2013-06-06 19:11:32 -06:00 |
|
Gregory Nutt
|
2864dfac0d
|
Add SAM4L BSCIF register definition file
|
2013-06-06 16:24:33 -06:00 |
|
Gregory Nutt
|
168702f7e1
|
Fix a backward conditional that cause the STM32 usb host driver to fail to detect disconnection events. From Scott
|
2013-06-06 15:00:18 -06:00 |
|
Gregory Nutt
|
3edec35c51
|
Add flow control support to the STM32 serial driver; Fix some issues with UART2 and 5. From Lorenz Meier and Mike Smith
|
2013-06-06 14:49:14 -06:00 |
|
Gregory Nutt
|
38c7818ea8
|
Add register definitions for SAM4L BPM and SCIF blocks
|
2013-06-06 11:19:18 -06:00 |
|
Gregory Nutt
|
e352d4f3ad
|
Add register definitions for SAM4L BPM and SCIF blocks; SAM4L clock initialization now selects an optimal power scaling mode
|
2013-06-06 11:18:52 -06:00 |
|
Gregory Nutt
|
93b67f1598
|
Move SAM4L peripheral clock logic to a separate file
|
2013-06-05 18:48:30 -06:00 |
|
Gregory Nutt
|
30f5d90430
|
Updates to SAM4L clocking. Still not finished
|
2013-06-05 16:41:52 -06:00 |
|
Gregory Nutt
|
19b38fa95f
|
Add power management register defintions and clock control logic for the SAM4L
|
2013-06-05 13:35:19 -06:00 |
|
Gregory Nutt
|
82d37c755b
|
Add SAM4L FLASHCALW header file
|
2013-06-05 10:43:33 -06:00 |
|
Gregory Nutt
|
efce99ba6f
|
SAM4L GPIO port addressing fixes; SAM4L Xplained LED support; minor documentation updates
|
2013-06-05 08:54:37 -06:00 |
|
Gregory Nutt
|
52ce4f84ff
|
Add configs/sam4l-xplained/src/up_userleds.c
|
2013-06-04 16:35:43 -06:00 |
|
Gregory Nutt
|
5cdcdaf0bd
|
More changes that should have gone with the last commit
|
2013-06-04 15:23:47 -06:00 |
|
Gregory Nutt
|
7ddaf6efc7
|
Add SAM4L GPIO driver
|
2013-06-04 15:12:56 -06:00 |
|
Gregory Nutt
|
e35d569477
|
Create SAM4L GPIO driver header file
|
2013-06-04 13:33:30 -06:00 |
|
Gregory Nutt
|
2fb1a3269b
|
Add SAM4L (and 4S) GPIO register definitions
|
2013-06-04 11:38:23 -06:00 |
|
Gregory Nutt
|
1d8c8c0999
|
If CONFIG_STM32_DMACAPABLE is defined, use stm32_dmacapable to workaround attempt SPI DMAs from the CCM stack
|
2013-06-04 09:05:39 -06:00 |
|
Gregory Nutt
|
e023ccf016
|
Add stm32_dmacapable interface to determine is it is possible to perform DMA from a given address.
|
2013-06-04 08:44:49 -06:00 |
|
Gregory Nutt
|
29de68525d
|
SAM4L alternate pin mapping header file; Use USART1 for virtual COM port console
|
2013-06-03 17:53:05 -06:00 |
|
Gregory Nutt
|
a732e03139
|
Add a skeleton configuration that will eventually support the SAM4L Xplained Pro board
|
2013-06-03 15:11:56 -06:00 |
|
Gregory Nutt
|
081d3f989d
|
Add vector and chip cability definitions for the SAM4L family
|
2013-06-03 11:23:41 -06:00 |
|
Gregory Nutt
|
3613d6ed8b
|
Add interrupt and memory map definitions for the AT91SAM4L
|
2013-06-03 09:32:04 -06:00 |
|
Gregory Nutt
|
5f97fb8041
|
Rename sam3u/ architecture directories to sam34/ to include the SAM4L
|
2013-06-02 13:57:22 -06:00 |
|
Gregory Nutt
|
7bfa4e299c
|
Add missing NSH configuration settings. Correct some conditional logic for STM32 FALSH pre-fetch settings. From Lorenz Meier
|
2013-06-02 13:16:35 -06:00 |
|
Gregory Nutt
|
b20b0a1839
|
Eliminated sam3u_internal.h. Use separate header files instead. More renaming from sam3u_ to sam_ to make room in the namespce for the sam4l_
|
2013-06-02 13:04:40 -06:00 |
|
Gregory Nutt
|
28c64c90bd
|
Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool
|
2013-06-02 10:33:57 -06:00 |
|
Gregory Nutt
|
4748599a43
|
.dSYM only needs to be in the same .gitignore files as .exe
|
2013-05-30 15:02:04 -06:00 |
|
Gregory Nutt
|
7554d2888e
|
Upate .gitignore files. Add .dSYM. Make sure / is present where needed. Add some missing .gitignore files
|
2013-05-30 14:45:31 -06:00 |
|
Gregory Nutt
|
aa9589ac8f
|
Fix STM32F1 and F3 USB device driver. It was not handling NULL packets correctly and it prevent use of the driver with the CDC/ACM class
|
2013-05-29 10:26:00 -06:00 |
|
Gregory Nutt
|
680e570cc4
|
Add support for the STM32 Tiny development board from Laurent Latil
|
2013-05-28 14:24:17 -06:00 |
|
Gregory Nutt
|
1df321aed4
|
STM32F103C4 and F103C8 chip support from Laurent Latil
|
2013-05-28 14:09:44 -06:00 |
|
Gregory Nutt
|
6d3a292f02
|
Fix null packet handling in the PIC32 USB device driver. This is a critical bug fix for PIC32. Add support for the USB monitor to the Sure-PIC32MX configuration
|
2013-05-28 13:36:01 -06:00 |
|
Gregory Nutt
|
fc0209c445
|
Fix Sure PIC32 LOOPSPERMSEC
|
2013-05-27 16:29:41 -06:00 |
|
Gregory Nutt
|
d4e7f7fa94
|
Converted all configurations to use the kconfig-frontends tools, cleaned up the directory structure and naming to match some of the more recent configurations, and added a segment LCD driver for the board. The initial checkin of the LCD driver is just a clone of configs/pcblogic-pic32mx/src/pic32mx_lcd1602 and it not yet expected to be functional.
|
2013-05-26 16:44:53 -06:00 |
|
Gregory Nutt
|
af870d7ae3
|
Fix bugs in SLCD test and in SLCD CODEC
|
2013-05-24 11:11:48 -06:00 |
|
Gregory Nutt
|
5bb3a187ef
|
Add apps/examples/slcd, Remove USB from STM32L-Discovery, LSE support for the STM32 L family, some STM32L-Discovery LCD debug changes
|
2013-05-24 10:00:54 -06:00 |
|
Gregory Nutt
|
abf8c8a13a
|
STM32L-Discovery LCD driver is code compele but untested
|
2013-05-23 15:23:29 -06:00 |
|
Gregory Nutt
|
eb35cbf558
|
Beginning of a segment LCD driver for the STM32L-Discovery
|
2013-05-22 18:12:54 -06:00 |
|
Gregory Nutt
|
afa905fc15
|
Audio subystem update from Ken Pettit. Plus moved some header files
|
2013-05-21 13:13:05 -06:00 |
|
Gregory Nutt
|
28112cea0f
|
Add STM32L15X segment LCD register definitions; Updated documentatin and README files
|
2013-05-21 12:39:48 -06:00 |
|
Gregory Nutt
|
e4d906960a
|
Fix STM32L15X vector definitions; Fix STM32L-Discovery LED controls. The NSH configuration is now fully functional on the STM32L-Discovery board.
|
2013-05-21 11:25:30 -06:00 |
|
Gregory Nutt
|
9ea58951b4
|
STM32L152: Better LOOPSPERMSEC; Need to set higher performance VOS
|
2013-05-20 15:51:37 -06:00 |
|
Gregory Nutt
|
b475e965a6
|
Internal FLASH MTD driver for TI/Stellaris from Max Holtzberg
|
2013-05-20 12:47:54 -06:00 |
|
Gregory Nutt
|
4b3c3b4cef
|
Fix STM32L-Discovery clock setup - The X3 crystal is not fitted on the board
|
2013-05-20 12:17:34 -06:00 |
|
Gregory Nutt
|
5ad97e995c
|
Misc updates to STL32L15X logic
|
2013-05-20 10:08:44 -06:00 |
|
Gregory Nutt
|
c193d3fad3
|
Add STM32L152X RCC PLL and FLASH support. Now compiles errorfree.
|
2013-05-19 14:35:30 -06:00 |
|
Gregory Nutt
|
63679d05a6
|
STM32L15X UART, DMA, and heap initialization support
|
2013-05-19 11:54:56 -06:00 |
|
Gregory Nutt
|
5d80dfd129
|
Add SYSCFG definitions for STM32L152; Add board support STM32L-Discovery
|
2013-05-19 11:04:19 -06:00 |
|
Gregory Nutt
|
e5b21a96d4
|
Add PWR and RCC register definitions for the STM32F152
|
2013-05-19 08:55:36 -06:00 |
|
Gregory Nutt
|
66b8913e18
|
Add STM32L15X memory map
|
2013-05-18 16:08:28 -06:00 |
|
Gregory Nutt
|
97844b79a1
|
Add support for STM32L15X GPIOs
|
2013-05-18 15:32:50 -06:00 |
|
Gregory Nutt
|
96b91d5dc7
|
Support for STM32L15xx interrupt vectors
|
2013-05-18 12:56:03 -06:00 |
|
Gregory Nutt
|
7629593f72
|
Begnning of support for the STM32L15X family
|
2013-05-18 11:15:37 -06:00 |
|
Gregory Nutt
|
9de230d9a3
|
Fix STM32 F1 DMA register definitions. From Laurent Latil.
|
2013-05-15 16:11:16 -06:00 |
|
Gregory Nutt
|
8447e76779
|
Clean up of pirelli-dpl10/nsh_highram configuration
|
2013-05-15 08:29:04 -06:00 |
|
Gregory Nutt
|
88c0911fb1
|
Various changes and bigfixes for problems detected by CppCheck
|
2013-05-09 14:23:34 -06:00 |
|
Gregory Nutt
|
c9fcc7eef4
|
Fix typo is STM32 ADC driver for F2 and F4: ADC not ACD
|
2013-05-08 21:45:46 -06:00 |
|
Gregory Nutt
|
44dc7c713b
|
Fix for lpc17xx i2c single byte read timeout error problem from M.Kannan
|
2013-05-08 06:57:55 -06:00 |
|
Gregory Nutt
|
24368a6581
|
STM32 option to disable sleep to prevent disconnection of debugger
|
2013-05-07 14:10:34 -06:00 |
|
Gregory Nutt
|
fae527deef
|
The Kinetis GPIO logic had some of the same issues as did the Kinetis L
|
2013-05-06 11:49:28 -06:00 |
|
Gregory Nutt
|
7628d3aa57
|
Fixes LEDs on the Freedom KL25Z board
|
2013-05-06 11:07:53 -06:00 |
|
Gregory Nutt
|
f1298f03a1
|
Convert configs/pirelli_dpl10/nsh_highram to use the kconfig-frontends tools
|
2013-05-05 10:38:02 -06:00 |
|
Gregory Nutt
|
ca5641f2d7
|
Make Pirelli-DLP10 a true board configuration; Calypso no compiles without errors
|
2013-05-05 09:10:47 -06:00 |
|
Gregory Nutt
|
b934926bd2
|
Repartitioning of header files for Kinetis L
|
2013-05-02 09:24:36 -06:00 |
|
Gregory Nutt
|
0d1cf112cf
|
Changes to remove some warning sduring compilation for ZKit-arm-1769 Board.
|
2013-05-02 06:28:59 -06:00 |
|
Gregory Nutt
|
1cf695cbec
|
Freedom KL25Z pin mux'ing fixes from Alan Carvalho de Assis
|
2013-05-02 06:08:50 -06:00 |
|
Gregory Nutt
|
ba52f8d3ec
|
Misc changes for clean built od mikroe-stm32f4 configurations
|
2013-05-01 09:21:13 -06:00 |
|