Gregory Nutt
5f2d4b8f84
Changes from review of commit e851a24329
2017-08-02 08:26:08 -06:00
Masayuki Ishikawa
e851a24329
arch/arm/src/lc823450: Initial support for ON Semiconductor LC823450
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-08-02 21:09:43 +09:00
Titus von Boxberg
55e9c8990c
stm32_rcc: code style
2017-08-01 16:25:19 +02:00
Titus von Boxberg
a4e97d5daf
Added functions for DSI clock source selection
2017-08-01 16:24:48 +02:00
Gregory Nutt
05ea22e9ab
STM32F7: Fix for coding standard violations that came in with cd3ca1140e -- missed a file last time
2017-07-31 18:36:38 -06:00
Gregory Nutt
5f4fdb42be
STM32F7: Fix for coding standard violations that came in with cd3ca1140e
2017-07-31 18:35:37 -06:00
Titus von Boxberg
604a6dc0fa
improved help text
2017-08-01 01:23:28 +02:00
Titus von Boxberg
bdee01f492
added function for reset
2017-08-01 01:23:28 +02:00
Titus von Boxberg
0947b31fbb
STM32_RCC_DCKCFGR2 has nothing to do with PLLI2S; PLLI2S is not dependent on LTDC, instead on SAICLK1/2 generated from PLLI2S
2017-08-01 01:23:28 +02:00
Titus von Boxberg
9d56dbb403
comment corrected
2017-08-01 01:23:28 +02:00
Titus von Boxberg
63bce1fc34
no board specific dithering values used; corrected comment; corrected dithering init
2017-08-01 01:23:28 +02:00
Titus von Boxberg
ec95720d13
corrected LIPOS/LIPCR calculation
2017-08-01 01:23:28 +02:00
Titus von Boxberg
28a53d8e25
change only polarity bits in LTDC_GCR
2017-08-01 01:23:28 +02:00
Titus von Boxberg
5de2468521
comments corrected
2017-08-01 01:23:28 +02:00
Titus von Boxberg
69aca28e87
commented
2017-08-01 01:23:28 +02:00
Titus von Boxberg
ec43001d91
HEAP2 depends on CONFIG_ARCH_HAVE_HEAP2, not on particular FMC RAM type
2017-08-01 01:23:28 +02:00
Titus von Boxberg
777b17928f
corrected register debugging
2017-08-01 01:23:28 +02:00
Titus von Boxberg
1944ab6f9b
added missing config option for register value debugging
2017-08-01 01:23:28 +02:00
Titus von Boxberg
dc392a6c68
enable APB2 DSI clock
2017-08-01 01:23:28 +02:00
Juha Niskanen (Haltian)
20dc5ad3b4
STM32L1: add base address for TIM11
...
STM32L4 PWR: correct PWR_SR2 REGLPS and REGLPF bits, add port I registers. Also remove duplicate section from Kconfig
2017-07-31 07:32:43 -06:00
Jeff
a420c0f369
To use an external oscillator module (not just a crystal) with the STM32F4, one needs to enable the HSEBYP bit in the RCC_CR register. This change allows an integrator to define STM32_RCC_CR_HSEBYP in their board.h file if they want this configuration.
2017-07-30 06:22:30 -06:00
Gregory Nutt
47791442a0
Squashed commit of the following:
...
commit 3fcf84a9a2673e1e1466ce5b114d7b73c257e515
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 12:00:31 2017 -0600
Spirit: Brings in the last of the PktCommon interfaces.
commit d26ebd901ba4ba84910e99b4e728b98c30fa4c0b
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:54:52 2017 -0600
Spirit: Add a few more PktCommon interfaces.
commit b5cb8041d50233a4abb8fb4d1dcef5428ae2c2b2
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:33:31 2017 -0600
libc/termios: Remember block comments before empty file sections.
commit 0fcab2c1c8c74442d40bd5e8c6af50a34f8a5821
Author: Sebastien Lorquet <sebastien@lorquet.fr>
Date: Fri Jul 28 09:31:00 2017 -0600
tcdrain implementation based on a new term ioctl
commit 797d4adf7d41068c671f0217d369b797b269de1a
Author: Stefan Kolb <Stefan.Kolb@avat.de>
Date: Fri Jul 28 09:19:04 2017 -0600
We discovered a problem with the samv7 mcan driver which results, under some circumstances, in a very high CPU load.
The problem occurs, and is easily reproducible, if the device is connected to a CAN network with a wrongly configured CAN speed (baud rate). In our tests we set the CAN speed of the device to 1000000 and the speed of the other CAN nodes to 500000. The device is restarted and sends a CANopen “bootup message” to the CAN network. This results in huge amount of errors messages on the CAN bus, probably because of the CAN feature for acknowledging error messages. The error messages can’t be read by the device because of the misconfigured CAN speed, instead the CAN chip reports lots of errors, which are reported to the application which uses the CAN driver (CONFIG_CAN_ERRORS is enabled).
The CAN errors are reported from the CAN chip via interrupts and thus the interrupt load is very high in this scenario. To fix the problem the driver now disables each RX error interrupt after it is occurred. The RX error interrupts are turned back on if at least one CAN message is received successfully.
commit e298f48e96d9e34017dcab8e4d87032862ae9322
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Jul 28 09:06:26 2017 -0600
Spirit: Bring in PktStack interfaces.
commit 4a0f00a7058312dcf6ac392689b9f69112f613ec
Merge: 855cf97130 b458934ac4f287cc25d6598386ef90c9ff8cbab92fc0fbcf7e6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-28 12:01:05 -06:00
Gregory Nutt
5f31999b75
Trivial fix to spacing
2017-07-27 11:50:59 -06:00
Titus von Boxberg
28eab902d0
No FSMC, only FMC for STM32F7
2017-07-27 18:27:01 +02:00
Gregory Nutt
2fc0fbcf7e
Squashed commit of the following:
...
commit 89e9d426e91c056e659fccf5e5c4392618f8f777
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:44:19 2017 -0600
Update some comments
commit 9c5d8a5833350006ed389e898b11c8c8a20e5f4f
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Mon Jul 24 16:15:54 2017 -0600
Spirit: Rename drivers/wireless/spirit/src to lib. Move Spirit network driver out of IEEE802.15.4 into drivers/wireless/spirit/drivers
commit cabc0ec9e6eb558dcb715ab17264383aa0105e7a
Merge: 87b616414a 6bd744c4b3f4e46b0da72319ea53a9d88dc9b2e5
2017-07-24 16:46:30 -06:00
Gregory Nutt
f4e46b0da7
Missed part of 2319ea53a9. Was still getting the warning.
2017-07-22 10:55:54 -06:00
Gregory Nutt
2319ea53a9
STM32L4: Eliminate a warning about implicit definition of function. While we are at it, let's improve the naming a little too.
2017-07-22 09:53:29 -06:00
raiden00pl
f6c1d59531
stm32_hrtim: add slave timers private data, fix some bad definitions, some asserions
2017-07-22 15:14:59 +02:00
Gregory Nutt
c3b552e072
Minor cosmetic updates from review of last PR.
2017-07-20 07:39:57 -06:00
Titus von Boxberg
a20c3b17ce
warning message when using DSI (for debugging)
2017-07-19 20:39:27 +02:00
Titus von Boxberg
7b07471ece
documentation update to f7
2017-07-19 19:14:50 +02:00
Titus von Boxberg
6d29a04752
naming errors/inconsitencies/typos
2017-07-19 19:14:49 +02:00
Titus von Boxberg
1241960d4a
STM32F7: Switch from CCM to DTCM
2017-07-19 19:07:53 +02:00
Titus von Boxberg
071b2dda28
compileable with LTDC_INTERFACE and LTDC_USE_DSI
2017-07-19 19:07:53 +02:00
Titus von Boxberg
e67ba8c88d
option for DSI output
2017-07-19 19:07:53 +02:00
Titus von Boxberg
d590ba7ab2
do not enforce CONFIG_STM32_CCMEXCLUDE for CONFIG_ARCH_CHIP_STM32F7, macro rename STM32 -> STM32F7, #include corrections
2017-07-19 19:07:53 +02:00
Titus von Boxberg
1826c1165a
macro rename STM32 -> STM32F7, #include corrections
2017-07-19 19:07:53 +02:00
Titus von Boxberg
32e417c3ac
renamed STM32_LCDTFT_BASE to STM32_LTDC_BASE for consistency
2017-07-19 19:07:53 +02:00
Titus von Boxberg
58053fef0f
macro rename STM32 -> STM32F7
2017-07-19 19:07:53 +02:00
Titus von Boxberg
ec3e4cabab
added config and make stuff for stm32f7 ltdc
2017-07-19 19:07:53 +02:00
Titus von Boxberg
ea703b832a
copied from stm32
2017-07-19 19:07:53 +02:00
Titus von Boxberg
07531de2e4
Copied files from stm32
2017-07-19 19:07:53 +02:00
Matt Thompson
eff9ba514c
SAMD21: Changes needed to get USB working.
2017-07-19 07:22:14 -06:00
Titus von Boxberg
f3267ddb71
I2C4_SDA can also be on GPIO PB7
2017-07-18 11:43:53 +02:00
savinz
1b27dd32af
STM32 F7 Ethernet: Fix typo in header; Add memory sync barrier between writing to DMA TX descriptor and restarting DMA TX. Avoid calling work_queue on pollwork if it's already queued, just skip a poll cycle instead. Nucleo-144: Fix RMII TXD1 signal, connected to PB13 not to PG14.
2017-07-14 09:23:43 -06:00
Gregory Nutt
447785b264
SAMD/L21: Need to preserve errno value across syslog() call.
2017-07-12 16:22:23 -06:00
Gregory Nutt
10fbb2b089
SAMD/L21 USB: Remove all commented out logic.
2017-07-12 08:10:21 -06:00
Janne Rosberg
76ea6f09ec
SAMD/L21: Add a USB driver. Developed for Filament Inc. by Offcode, LTD.
2017-07-12 07:46:46 -06:00
Matt Thompson
5448c99ff2
I was having issues with the bus freezing up .. slaves holding SDL low.. so I rewrote a good portion of the interrupt logic based on the application notes from Atmel. One major improvement is using the RXNACK flag in the STATUS register, which indicates that no device responded to an address packet. Assuming that the chip will always give an interrupt status, I believe it's possible to eliminate the timer as well.
2017-07-12 06:44:53 -06:00
Matt Thompson
1e0560b22f
SAMD21: Fix some SPI-related issues.
2017-07-11 12:48:38 -06:00
Gregory Nutt
839019f305
SAMD/L21 I2C: Another update... needs to use enter/leave_critical_section vs. old irqsave/restore.
2017-07-11 07:01:05 -06:00
Alan Carvalho de Assis
5b9526b4c1
SAML21 I2C driver. Developed for and contributed with permissin from Filament company.
2017-07-11 06:58:58 -06:00
Gregory Nutt
79e5d2b7b6
STM32 TIM3/4 are always 16-bits; never 32-bits. Noted by Eetu Nevalainen.
2017-07-10 13:56:06 -06:00
Gregory Nutt
76587b2c6f
STM32 Kconfig: 'unfold' some of the dependencies to provide better long term configuration support. This also effective reverts the recent 15b85738e7
2017-07-06 10:34:54 -06:00
Gregory Nutt
47be509d79
Rename CONFIG_STM32_STM32F40XX to CONFIG_STM32_STM32FXXXX since it is used by F4 parts other than F40x
2017-07-06 10:20:14 -06:00
gwenhael.goavec
15b85738e7
In arch/arm/src/stm32/Kconfig when the CPU is a STM32F4, some STM32_HAVE_xx with xx = {OTGFS, TIM3, TIM4, SPI3, I2S3, I2C3} are selected by default. But for F410 these peripherals are absent. This change add tests to check if the target CPU is an F410 or not and selects according to the situation. This also adds a select for STM32_HAVE_DAC1 present on this STM32 flavor.
2017-07-06 09:52:21 -06:00
Eetu Nevalainen
21dcc8cbc7
stm32f40xxx_rtcc ISR register and write protection fix
2017-07-03 11:06:07 -06:00
Gregory Nutt
68315b7444
Merged clang into master
2017-07-03 07:04:57 -06:00
Gregory Nutt
09ab651e02
samv71-xult: Add support for the MRF24J40 radio and create a mrf24j40-starhub configuration. A few fixes to IPv6 and 6LoWPAN were required to have 6LoWPAN and Ethernet coexisting. Untested and expect some complexity in the bring-up.
2017-07-02 11:04:57 -06:00
Gregory Nutt
cf44fd6ec0
Add CLANG definitions in Kconfig and Toolchain.defs
2017-07-02 06:42:48 -06:00
Gregory Nutt
1c5ec07414
arch/: Remove dangling space at the end of lines.
2017-06-28 13:16:48 -06:00
Gregory Nutt
aa1708e7c0
6LoWPAN: Update README; fix duplicate and bad memcpy in loopback driver.
2017-06-26 10:53:57 -06:00
raiden00pl
715d6fa9ff
stm32f33xxx_rcc: cleanup + move hrtim clock source selection
2017-06-26 18:30:10 +02:00
raiden00pl
aead2b2afd
stm32f33xxx_rcc.h: fix typo
2017-06-26 18:26:59 +02:00
Juha Niskanen
56eeb40958
STM32L4 serial: Allow configuring Rx DMA buffer size
2017-06-26 09:19:42 -06:00
Juha Niskanen
90ccdf287d
STM32 L4 DMA: Correct USART3_RX bad channel definition
2017-06-21 08:40:33 -06:00
David Sidrane
345ea957cf
Merged in david_s5/nuttx/upstream_kinetis (pull request #414 )
...
Kinetis:I2C fixed mis-placed kinetis_i2c_endwait
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-20 20:22:17 +00:00
David Sidrane
839a6e09f4
Kinetis:I2C fixed mis-placed kinetis_i2c_endwait
...
Fixed accedently replaced post with wait.
2017-06-20 10:01:35 -10:00
Gregory Nutt
5de74441a6
Costmetic change from review of last PR
2017-06-20 13:33:14 -06:00
David Sidrane
1ee03d7500
Merged in david_s5/nuttx/upstream_kinetis (pull request #413 )
...
Kinetis:I2C driver added I2C3, reference counting and reset
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-20 19:31:38 +00:00
David Sidrane
9e0f583774
Kinetis:I2C driver added I2C3, reference counting and reset
...
Refactored the driver to support reference counting and reset
added I2C3
2017-06-20 08:34:12 -10:00
Sebastien Lorquet
0bf4893b2c
STM32: Allow clock frequencies > 168 Mhz on stm32f427/429. We need to enable the power overdrive for this case. This patch allows the required bits to be set in proper sequence. It also modifies the local register access operations to allow more than 16-bit registers.
2017-06-20 11:56:54 -06:00
Juha Niskanen
326ab01a91
STM32 F7: Set I2C4 SDA and SCL pins to open drain mode
2017-06-20 08:06:30 -06:00
Juha Niskanen
2c548a4e58
STM32 L4: I2C4 was writing to wrong RCC registers
2017-06-20 08:04:09 -06:00
Gregory Nutt
47ad81b3e5
Trivial spelling fix
2017-06-20 08:02:42 -06:00
Pekka Ervasti
2eb782961f
STM32 L4: Set I2C SDA and SCL pins to open drain mode.
2017-06-20 07:59:27 -06:00
Jussi Kivilinna
a1ee9547f3
stm32_adc: invalidate dma buffer before use. Missing invalidation caused old samples being fetched from cache.
2017-06-19 07:52:19 -06:00
raiden00pl
c29c4e2ec2
stm32_hrtim: remove unneeded definitions
2017-06-18 18:08:25 +02:00
raiden00pl
4e0f45f252
stm32_hrtim: fix initialization bug, minor changes
2017-06-18 18:06:37 +02:00
raiden00pl
cd30545cd9
stm32_hrtim: ADC triggering and DAC synch events
2017-06-18 15:26:39 +02:00
raiden00pl
96e639262a
stm32_hrtim: add hrtim ops
2017-06-18 11:01:36 +02:00
raiden00pl
797e286cb0
stm32_hrtim: timers mode configuration
2017-06-18 09:28:05 +02:00
raiden00pl
dfeffefa69
stm32_hrtim: typo
2017-06-18 08:02:15 +02:00
Gregory Nutt
0024840f7d
Trivial, cosmetic changes from review of last PR
2017-06-17 14:44:11 -06:00
raiden00pl
b48a86ee33
Merge remote-tracking branch 'upstream/master'
2017-06-17 22:18:03 +02:00
raiden00pl
4d9d3c4a9c
stm32_hrtim: cosmetics
2017-06-17 22:12:56 +02:00
raiden00pl
5e3360b8b9
stm32_hrtim: faults and events configuration
2017-06-17 21:56:11 +02:00
David Sidrane
c79d4d1988
stm32:flash add CONFIG_STM32_STM32F469 to list defining OPTCR1
2017-06-16 14:16:32 -10:00
Gregory Nutt
5245cbc6f5
STM32 SPI/I2S: Back out a bad pin mapping change from 4ab2a3661e. Try to staighten out some I2C3 and SPI3 pin configuration stuff.
2017-06-16 09:34:22 -06:00
Sebastien Lorquet
4d9be9bc20
STM32 F4 FLASH: Enable/disable the flash write protection on any sector. I have verified it to work on the stm32f427.
2017-06-16 08:46:57 -06:00
raiden00pl
bd7bee5db0
stm32_hrtim: structures for deadtime and chopper, cosmetics
2017-06-16 11:36:23 +02:00
David Sidrane
64e3dc5e8b
Merged in david_s5/nuttx/upstream_samv7_twi (pull request #399 )
...
samv7:twihs driver add reference counting
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-15 21:45:07 +00:00
David Sidrane
d9d32ac808
samv7:twihs driver add reference counting
2017-06-15 11:16:28 -10:00
raiden00pl
268c6d0b7d
stm32_hrtim: outputs enable, period and compare functions, cosmetics
2017-06-15 16:45:21 +02:00
Gregory Nutt
d958cec7a4
Cosmetic changes from review of last PR
2017-06-15 06:58:55 -06:00
Hidetaka
0f1d388248
Merged in TJ-Hidetaka-Takano/nuttx-pr/feature/fix-kconfig (pull request #394 )
...
Fixed typo "CORTEXR5F" in arch/arm/Kconfig
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-15 12:12:31 +00:00
Hidetaka
9dfa8f7df9
Merged in TJ-Hidetaka-Takano/nuttx-pr/feature/fix-armv7m-toolchain-def (pull request #395 )
...
Fixed ARMv7-M Toolchain definition for Cortex-M4.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-15 12:12:01 +00:00
Hidetaka Takano
5591fc6b16
Fixed ARMv7-M Toolchain setting.
...
- Cortex-M4 only have Single Precision FPU.
2017-06-15 20:52:37 +09:00
Hidetaka Takano
d665392873
Fixed typo "CORTEXR5F" in arch/arm/Kconfig
2017-06-15 20:44:06 +09:00
raiden00pl
96d40dec40
stm32_hrtim: cosmetic
2017-06-15 11:20:40 +02:00
Leif Jakob
4a79547fb8
multiple fixes for stm32f1xx RTC clock
...
- compile issues because of missing RTC_MAGIC #defines
- missing functionality based on RTC_MAGIC in RTC based on stm32_rtcounter.c
- IRQ setup from up_rtc_initialize was later reset in up_irqinitialize
- write access to backup registers without enabling access to backup domain
- possible races in set/cancel alarm
tested with STM32F103C8 only
device now wakes up from forced STANDBY mode by alarm
2017-06-14 22:36:40 +02:00
David Sidrane
b2d929e40a
Kinetis:SPI driver
2017-06-13 17:46:57 -10:00
David Sidrane
de3695d32b
kinetis:lpserial fixed header inclusion
2017-06-13 17:46:56 -10:00
Gregory Nutt
e379491d13
STM32/STM32L4: Review of last commit -- Eliminate possible underflow
2017-06-13 07:05:46 -06:00
JM
7903a8a46c
stm32/stm32l4 PWM: While attempting to output a 70 MHz square wave from the timer output of a STM32 clocked at 140 MHz (which works fine in baremetal C), I stumbled on what I believe to be an error in arch/arm/src/stm32/stm32_pwm.c. Line 1304 we are told that
...
reload = timclk / info->frequency;
which I belive to be incorrect, it should be
reload = timclk / info->frequency - 1;
since starting to count from 0, if I want to output half of the TIM clock, I must count to 1 and not to 2.
Surely enough, the original code did output 140/3=47 MHz, while this correction does allow the output up to 70 MHz.
I am not sure this affects most users generating slow PWM (e.g. PX4) but for frequencies
close to the PCLK, indeed the difference becomes significant.
2017-06-13 06:01:13 -06:00
raiden00pl
f6ba4642a3
stm32_hrtim: GPIOs configuration + EEV and FAULT strucutres
2017-06-12 18:45:58 +02:00
Gregory Nutt
f5f1c73b54
Based on the last PR, review all serial driver vector attachment. Found one additional error and updated all relevant drivers to current interrupt parameter passing.
2017-06-12 06:22:35 -06:00
Masayuki Ishikawa
93a2d52b56
i.MX6: Fix a wrong parameter passed when calling irq_attach() in imx_serial.c
2017-06-12 13:34:53 +09:00
raiden00pl
de8cd6c870
stm32_hrtim: add character driver
2017-06-11 20:51:23 +02:00
Gregory Nutt
fe813545e8
STM32F33: Forgot to add new files that were a part of the last patch before committing.
2017-06-11 11:00:29 -06:00
Mateusz Szafoni
437ad3ccb2
STM32F33: Fix hrtim definitions, Add beginning of HRTIM driver
2017-06-11 10:49:20 -06:00
Gregory Nutt
1e5125c5d5
STM32L4: Remove some C++ style comments.
2017-06-08 13:43:47 -06:00
Gregory Nutt
8b907c4c1f
STM32L4: Fix a typo
2017-06-08 11:07:20 -06:00
Gregory Nutt
d99ceec58c
STM32L4: Add STM32L475 pinmap. Initial cut is just the the L476 pinmap with unsupported devices removed.
2017-06-08 10:55:27 -06:00
Gregory Nutt
596fe68854
STM32L4: Add STM32L475 OTGFS header file. Not fully reviewed.
2017-06-08 10:34:26 -06:00
Gregory Nutt
95fcdff1fd
STM32L4: Add STM32L475 RCC definitions/logic.
2017-06-08 10:04:28 -06:00
Gregory Nutt
1a405d2881
STM32L4: Add L475 syscfg register definitions.
2017-06-08 09:07:04 -06:00
Gregory Nutt
66e2247f30
STM32L4: Ad support for the STM32L475 family. Incomplete -- still needs pinmap, rcc, otgfs, syscfg
2017-06-08 08:52:09 -06:00
David Sidrane
4854eb1fd7
Kinetis:Fixed waning for kinetis_mpudisable
...
Missing header file added
2017-06-06 15:18:01 -10:00
David Sidrane
36da2b91c5
Kinetis:USB-FS driver
...
Removed the notion of attached. The khci_usbattach is call early in
the init either in board_initalize or in board_app_initalize. In
either case it is always done prior to the the class register.
Therefore the khci_usbattach call only set a flag, and that
flag is only tested in the class register. The class register will
enable the soft connect pull up.
2017-06-06 14:39:00 -10:00
David Sidrane
cb62675b5e
Kinetis:sim ensure isolation of clock dividers for 0 value case
...
This fixes a bug were a SoC does not have a clockdivN register
and passes a 0 for the init value. This prevents overflow of
the 0 decremented to -1 (0xffffffff) spilling over to other
clockdivN feilds.
2017-06-06 14:38:59 -10:00
David Sidrane
60c552ae0f
Kinetis:usbdev clean up ensuring proper use of HW.
...
Remove magic numbers from code, documented the use of
undocumented bits.
Remove comments and code that were not appropriate for this
hardware.
Removed ifdef that's that were always compiled and removed code
blocks that were never compiled.
Ensure proper access order to hardware.
Per the reference manual: disable endpoints prior to configuring buffer
descriptor, then enable endpoints
Reorganize interrupt processing order to offload data after processing
errors.
Reorganize initialization so that there is a clear initialization phase,
reset phase for both the hardware and software structures.
By breaking the initialization into smaller pieces, the reset interrupt
only resets the resources within the controller that should be reset.
Rework suspend and resume logic so they perform properly
Made attach and detach functions optional. As they do not make sense for
a bus powered device.
Ensured the calls to up_usbinitalize up_usbuninitalize do not violate the
USB spec.
2017-06-06 14:38:59 -10:00
David Sidrane
c1a3208f83
Kinetis:Disable MPU when not in protected mode.
...
The hardware reset state of the the MPU precludes any bus
masters other then DMA access to memory. Unfortunately
USB and SDHC have there own DMA and will not have access to
memory in the default reset state.
This change disabled the MPU if present on system startup.
2017-06-06 14:38:58 -10:00
Gregory Nutt
4d46979a6f
Tiva SSI: Resolves issue 52 'Copy-Paste error in tiva_ssibus_initialize()' submitted by Aleksandr Kazantsev.
2017-06-01 06:38:47 -06:00
Juha Niskanen
ad6515563b
STM32L4 RTC: store RTC MAGIC to backup reg, not to address zero
2017-06-01 06:15:28 -06:00
Jussi Kivilinna
369b72f65a
stm32f7: Add SPI DMA support
2017-05-31 09:13:20 -06:00
Juha Niskanen
14c233a2f5
STM32L4: gpio: put back EXTI line source selection
2017-05-31 06:34:14 -06:00
David Sidrane
a077d0285b
Kinetis:Added ADC channel macro
2017-05-25 16:52:08 -10:00
David Sidrane
b407020968
Kinetis:Fixed typo in kinetis_adc.h
2017-05-25 16:51:25 -10:00
David Sidrane
488f42588b
Kinetis:Removed base address from kinetis_adc.h
2017-05-25 16:50:42 -10:00
Juha Niskanen
0c9abbfe67
STM32L4: Add IWDG peripheral. This is the same as for STM32 except that prescale and reload can be
...
changed after watchdog has been started, as this seems to work on L4.
2017-05-23 07:02:36 -06:00
Gregory Nutt
32eb5ca99a
Missed one change in the previous commit.
2017-05-21 15:02:00 -06:00
Gregory Nutt
7ffbb704d6
This is based on a patch by Taras Drozdovsky. Basically, the delay that was added during the integration of the CDC/ACM host driver was interfering with streaming audio. That delay was put there to prevent build endpoints from hogging the system bandwidth. So what do we do? Do we hog the bandwidth or do we insert arbitrarity delays. I think both ideas such.
2017-05-21 14:28:29 -06:00
Taras Drozdovsky
4ab2a3661e
STM32F4: add cs43l22 audio driver and i2s driver
2017-05-21 14:14:09 -06:00
Juha Niskanen
819a6e049e
stm32_i2c: make private symbols static
2017-05-19 07:16:01 -06:00
Gregory Nutt
989195cec8
STM32 Ethernet: Last patch breaks every board that does not use the KSZ80801 PHY.
2017-05-17 15:36:57 -06:00
Gregory Nutt
aac3a3df8e
STM32 Ethernet: Should not stm32_phyintenable() return a failure if it could not enable the PHY interrupt?
2017-05-17 10:07:09 -06:00
Sebastien Lorquet
2c6ea23aee
STM32 Ethernet: Add support for KSZ8081 PHY interrupts.
2017-05-17 10:04:49 -06:00
Juha Niskanen
8896f91f53
STM32L4: remove duplicate USART selects from Kconfig
2017-05-17 08:05:24 -06:00
Jussi Kivilinna
9169ff6a15
stm32_serial: fix freezing serial port. Serial interrupt enable/disable functions do not disable interrupts and can freeze device when serial interrupt is received while execution is at those functions.
...
Trivially triggered with two or more threads write to regular syslog stream and to emergency stream. In this case, freeze happens because of mismatch of priv->ie (TXEIE == 0) and actually enabled interrupts in USART registers (TXEIE == 1), which leads to unhandled TXE interrupt
and causes interrupt storm for USART.
2017-05-17 06:50:46 -06:00
Lederhilger Martin
b8e7d5c455
I had the problem that the transmit FIFO size (= actual elements in FIFO) was slowly increasing over time, and was full after a few hours.
...
The reason was that the code hit the line "canerr("ERROR: No available mailbox\n");" in stm32_cansend, so can_xmit thinks it has sent the packet to the hardware, but actually has not. Therefore the transmit interrupt never happens which would call can_txdone, and so the size of the FIFO size does not decrease.
The reason why the code actually hit the mentioned line above, is because stm32can_txready uses a different (incomplete) condition than stm32can_send to determine if the mailbox can be used for sending, and thus can_xmit forwards the packet to stm32can_send. stm32can_txready considered mailboxes OK for sending if the mailbox was empty, but did not consider that mailboxes may not yet be used if the request completed bit is set - stm32can_txinterrupt has to process these mailboxes first.
Note that I have also modified stm32can_txinterrupt - I removed the if condition, because the CAN controller retries to send the packet until it succeeds. Also if the condition would not evaluate to true, can_txdone would not be called and the FIFO size would not decrease also.
2017-05-16 07:47:18 -06:00
Gregory Nutt
b0fda33e13
Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR
2017-05-13 16:01:38 -06:00
Gregory Nutt
27805315f4
Tiva I2C: Correct an in conditional compilation
2017-05-13 14:01:42 -06:00
Gregory Nutt
6e4918c557
Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU
2017-05-13 13:28:15 -06:00
Gregory Nutt
7fe112fe4c
Kconfig/deconfigs: Add CONFIG_ARCH_TOOLCHAIN_GNU to indicate that the toolchain is based on GNU gcc/as/ld. This is in addition to the CPU-specific versions of the same definition.
2017-05-13 11:44:12 -06:00
Gwenhael Goavec-Merou
02535be36a
STM32F410. Add support for STM32Fr10. STM32F410 is a version of STM32F4 with 32 KB of RAM and 62 or 128 KB of flash.
2017-05-13 08:40:09 -06:00
David Sidrane
c4a2e1399b
Merged in david_s5/nuttx/upstream_kinetis (pull request #368 )
...
kinetis:K66 GPIO and pin mux cleanup
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-13 10:37:20 +00:00
David Sidrane
69a8aecbc8
kinetis:K66 define ALT1 to match ref manual
2017-05-12 17:21:54 -10:00
David Sidrane
700e4ff5b6
kinetis:K66 fixed TMP2_CH1 definition
2017-05-12 17:03:27 -10:00
Alan Carvalho de Assis
853d332b6c
Move CAN subsystem to its own directory and put device drivers there
...
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
2017-05-12 11:48:47 -03:00
Juha Niskanen
46851b33b2
STM32L4: port stm32l4_serial_get_uart function from STM32F7
2017-05-12 15:54:48 +03:00
Gregory Nutt
0de294a586
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:35:56 -06:00
Gregory Nutt
3091050963
STM32L4: Review of last PR + Move separate stm32l4_flash.h; move hardware-specific definitions to chip/stm32l4_flash.h
2017-05-11 06:58:39 -06:00
Juha Niskanen
c74a51f789
STM32L4: add internal flash write support
2017-05-11 14:35:27 +03:00
Juha Niskanen
4f18b40429
mtd/config: erase block between block read and write
2017-05-10 08:25:39 -06:00
Juha Niskanen
e04ea9e3e3
Merged in juniskane/nuttx_stm32l4/stm32l4_dbgmcu_pr (pull request #361 )
...
STM32L4: add dbgmcu header files
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-09 17:06:32 +00:00
Gregory Nutt
3d73a04259
Merged l432kc into master
2017-05-09 11:03:42 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Juha Niskanen
ce1ad33289
STM32L4: add dbgmcu header files
2017-05-09 14:13:51 +03:00
Sebastien Lorquet
d591d3ac4e
Restore settings for UARTs 4 and 5
2017-05-09 11:38:14 +02:00
Sebastien Lorquet
5204f19e4f
fix typo found by Juha during review
2017-05-09 11:32:16 +02:00
Sebastien Lorquet
c1cf1269c7
Adapt stm32l43x pin definitions
2017-05-09 10:58:04 +02:00
David Sidrane
014b69e120
removed stray paren.
2017-05-08 22:56:05 +00:00
David Sidrane
8406b40baa
Merged in david_s5/nuttx-16/david_s5/stm32serial-dma-buffer-round-off-not-up-1494258804216 (pull request #357 )
...
stm32:Serial DMA buffer round off not up
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-08 20:32:44 +00:00
Gregory Nutt
aa11d637a8
STM32 TIM: Add method to get timer width. Freerun timer: Use timer width to get the correct clock rollover point.
2017-05-08 12:33:15 -06:00
David Sidrane
546e7acb99
stm32:Serial DMA buffer round off not up
2017-05-08 15:54:03 +00:00
David Sidrane
b8ef079951
stm32:stm32_serial Forgot the -1 on mask
2017-05-08 03:43:36 +00:00
David Sidrane
0b2fb5a396
Merged in david_s5/nuttx/upstream_stm_dma (pull request #355 )
...
stm32: serial Allow configuring Rx DMA buffer size
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-06 17:49:48 +00:00
David Sidrane
b62ef579c8
stm32: serial Allow configuring Rx DMA buffer size
2017-05-06 05:16:21 -10:00
David Sidrane
5d6da5f4bb
kinetis:Add ARCH_HAVE_I2CRESET
2017-05-06 04:52:48 -10:00
David Sidrane
97260321f2
kinetis:k66 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:32 -10:00
David Sidrane
ce98cedb17
kinetis:k64 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:24 -10:00
David Sidrane
af1f48c1c5
kinetis:k60 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:14 -10:00
David Sidrane
1d9d13c426
kinetis:k40 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:09 -10:00
David Sidrane
979e671cf0
kinetis:k20 Pin mux configure all I2C signals as Open Drain
...
The output structure of the GPIO for I2C needs to be open
drain. When left at the default, one can observe on a scope
the slave contending with the push-pull during the ACK
2017-05-05 15:06:00 -10:00
Gregory Nutt
1cd3b3f590
Fix errors introduced into Kinetis serial when I unsuccessfully tried to correct coding standard violations. Folks, things will be better for everyone if you just follow that standard.
2017-05-05 14:47:11 -06:00
Gregory Nutt
0e49db7626
Add a blank line.
2017-05-05 09:35:47 -06:00
Juha Niskanen
35883ff9ae
Merged in juniskane/nuttx_stm32l4/l4dev (pull request #347 )
...
STM32L4: add support for many new MCUs from STM32L4X3XX product line and Nucleo-L452 board
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-05 15:31:07 +00:00
David Sidrane
f29981e473
kinetis:Added HW flow control and termios
2017-05-05 07:33:15 -06:00
David Sidrane
b6a8db1b39
Kinetis: Use optional BOARD_OSC_CR and BOARD_OSC_DIV in clock configuration
2017-05-05 07:18:39 -06:00
David Sidrane
29ef635e89
Kinetis:Add OSC_DIV to the kinetis_osc header
2017-05-05 07:16:11 -06:00
David Sidrane
f73e2aab8d
Kinetis:Fixed CLKSRC Bit Names
2017-05-05 07:14:00 -06:00
David Sidrane
2171523f50
Kinetis:Add TPM to K66 chip
2017-05-05 07:12:52 -06:00
Juha Niskanen
71accfc57b
STM32L4: add more chips to Kconfig
...
(This also removes DPFPU/DTCM/ITCM features again, fixing a
recent git history hickup.)
2017-05-05 11:03:49 +03:00
Juha Niskanen
a5e9724224
STM32L4: firewall for stm32l4x3xx
...
Not tested for any product family, but now it at least compiles.
L496 devices can have one bit wider Volatile Data Segment.
2017-05-05 10:15:09 +03:00
Juha Niskanen
075a8b913c
STM32L4: separate SYSCFG into product line specific files for clarity
2017-05-05 10:10:37 +03:00
Juha Niskanen
92f4277b1e
Merged in juniskane/nuttx_stm32l4/stm32l4_i2c_pr (pull request #346 )
...
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-05-04 19:29:08 +00:00
Jussi Kivilinna
7035723aeb
STM32F7 serial: Allow configuring Rx DMA buffer size
2017-05-04 07:09:19 -06:00
Jussi Kivilinna
acf0d17e5a
Fix STM32F7 I2C interrupt handler
2017-05-04 06:51:44 -06:00
Juha Niskanen
80c2d384bb
STM32L4: flash: update override config macros and add FLASH_CONFIG_B
2017-05-04 15:24:16 +03:00
Juha Niskanen
ae22eb224a
STM32L4: changes needed for STM32L452 and Nucleo-L452RE board
...
GPIO and UART seem similar across STMicro product matrix,
so renamed files accordingly. RCC is cloned just in case,
while conflicting differences there seem to be very minor.
2017-05-04 15:23:38 +03:00
Juha Niskanen
dd1b9dfa81
STM32L4: modularize Kconfig to support different product lines/families
...
This is modeled after STM32F7. Idea is to declare each chip in Kconfig
but allow for flash size override. Commit adds many STM32L4_HAVE_XXX
feature test macros.
2017-05-04 15:22:51 +03:00
Juha Niskanen
c67c4a75ba
STM32L4: stm32l4_i2c: change wrong macro to CONFIG_I2C_POLLED
2017-05-04 09:31:12 +03:00
Gregory Nutt
b0e880b04c
Revert "STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed."
...
This reverts commit 1e054a2d3b
2017-05-03 18:26:24 -06:00
Gregory Nutt
11c14470c3
Merge remote-tracking branch 'origin/master' into photon
2017-05-03 17:36:52 -06:00
Gregory Nutt
1e054a2d3b
STM32 I2C: More backward tests of CONFIG_I2C_POLLED. Needs to be reviewed.
2017-05-03 17:33:35 -06:00
David Sidrane
9b5ac56409
Fixed typo and backward ifdef
2017-05-03 23:10:48 +00:00
Juha Niskanen
ad3b941c44
STM32L4: stm32l4x6xx_pinmap: update I2C4 and DCMI pins
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 10:16:34 -06:00
Juha Niskanen
74e016d013
STM32F7: flash: macro naming errors, there is no FLASH_CONFIG_F for F7
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 10:14:46 -06:00
Gregory Nutt
e94865a317
Merge remote-tracking branch 'origin/master' into photon
2017-05-02 08:49:19 -06:00
Gregory Nutt
40b5c46024
STM32L4: Delete more references to DFPU, ITCM, and DTCM.
2017-05-02 08:03:21 -06:00
Mateusz Szafoni
1feaae7222
Merged in raiden00/nuttx (pull request #338 )
...
OPAMP support for STM32F33XX
2017-05-02 13:57:56 +00:00
Juha Niskanen
a59b7bc932
STM32L4: add GPIO_PORTI definition
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2017-05-02 07:41:14 -06:00
Juha Niskanen
0eb14e9baa
STM32L4: don't think these chips have DPFPU, DTCM or ITCM
2017-05-02 07:36:11 -06:00
Gregory Nutt
f7a28c09b0
Merge remote-tracking branch 'origin/master' into photon
2017-05-01 18:06:23 -06:00
Gregory Nutt
c59a5efcae
STM32F0: I2C frequency quantization. Add logic to get closer if an oddball frequency is used.
2017-05-01 17:52:51 -06:00
Alan Carvalho de Assis
ccfdef6ddf
STM32F0: Fix I2C frequency table
2017-05-01 17:41:57 -06:00
Gregory Nutt
e43b86dbd0
Merge remote-tracking branch 'origin/master' into photon
2017-04-30 17:42:37 -06:00
Gregory Nutt
a8ce97715b
Tiva I2C: Update to use the standard parameter passing to interrupt handlers.
2017-04-30 14:44:39 -06:00
Gregory Nutt
0597eb5587
Fix a typo introduced in last commit.
2017-04-30 12:41:19 -06:00
Gregory Nutt
c172d7cf63
EFM32, STM32, and STM32 F7 I2C: Update to use the standard parameter passing to interrupt handlers.
2017-04-30 11:56:06 -06:00
Gregory Nutt
dee736bd0d
STM32F0 I2C: Pin definitions should specify open drain (and probably 50Mhz).
2017-04-30 10:28:16 -06:00
Gregory Nutt
0a9dd3876b
STM32F0 I2C: Upate driver to use the standard interrupt parameter passing logic.
2017-04-30 09:19:51 -06:00
raiden00pl
e4d47d61cc
STM32F33: Add OPAMP support
2017-04-30 11:05:34 +02:00
Alan Carvalho de Assis
b688d41516
STM32F0 I2C: Initial cut at driver. Still a work in progress.
2017-04-29 16:53:47 -06:00
Gregory Nutt
f0bbe56620
STM32F0: Add some protection. There is only one interrupt for USART3-8. Current interrupt handling logic will support only one interrupt in that range.
2017-04-29 12:58:06 -06:00
Gregory Nutt
a7901f5c4c
Merge remote-tracking branch 'origin/master' into photon
2017-04-29 12:35:01 -06:00
Gregory Nutt
e9a5477506
Add an instance argument to the SPIDEV definitions.
2017-04-29 12:26:52 -06:00
Gregory Nutt
f175af3cd3
More missed enum spi_dev_e forward references.
2017-04-29 08:29:01 -06:00
Gregory Nutt
b6b16bf4da
Fix forward references that were mangled in last large changes.
2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c56c6f7ccc
ARM arch changes
2017-04-28 18:23:29 +02:00
Gregory Nutt
9431fb1d91
STM32L4: I2C was not using current interrupt handling parameter passing logic.
2017-04-28 08:21:02 -06:00
Juha Niskanen
b4d2651ca9
STM32L4: stm32l4_i2c: add I2C4 code
2017-04-28 08:09:16 -06:00
Gregory Nutt
2e6908b384
IOCTLS. Separate wireless character driver IOCTL commands from wireless network driver IOCTL commands. Move from wireless.h to ioctl.h.
2017-04-27 16:58:30 -06:00
Gregory Nutt
b608afc484
STM32F0: Fix some missing settings in the clock configuration logic
2017-04-27 15:44:05 -06:00
Gregory Nutt
92d761dfe3
STM32F0 Serial: Costmetic changes to spacing.
2017-04-27 09:15:18 -06:00
Sebastien Lorquet
c3119f06a2
Update STM32L4 README.txt file.
2017-04-27 08:37:14 -06:00
Juha Niskanen
f1b71e3ae7
TM32L4: Add some defines for the new peripherals in STM32L496 parts
2017-04-27 07:26:32 -06:00
Juha Niskanen
8a6662c957
TM32L4: Add some defines for the new peripherals in STM32L496 parts
2017-04-27 07:25:20 -06:00
Juha Niskanen
707d1e67fc
STM32, STM32F7, STM32L4: Remove incorrect comment about STM32L1 LSE/RTC/LCD
2017-04-27 07:18:36 -06:00
Gregory Nutt
7d8140708e
Merge remote-tracking branch 'origin/master' into photon
2017-04-26 10:42:19 -06:00
Simon Piriou
6bb2db8c15
bcmf: enable DMA for SDIO transfers
2017-04-26 17:23:53 +02:00
Gregory Nutt
232fbf7f00
CONFIG_DEBUG_HARDFAULT should be available for Cortex-M0 too. configs/nucle-f072rb/nsh: Correct amount of available SRAM in defconfig.
2017-04-26 07:45:40 -06:00
Juha Niskanen
06e4c4aedd
STM32L4: add support for the STM32L496XX family
2017-04-25 08:47:50 -06:00
Simon Piriou
3bf5044306
stm32: cleanup stm32_sdio.c
2017-04-24 20:01:41 +02:00
Gregory Nutt
62966d915c
Merge remote-tracking branch 'origin/master' into photon
2017-04-23 10:16:54 -06:00
Gregory Nutt
ca7d88f6bb
SAM3/4: Fix a few more naming differences noted by Alan Carvalho de Assiss.
2017-04-23 08:14:49 -06:00
kc_dtm
db9143b2bd
SAM3/4: Remove inappropriate semicolon.
2017-04-23 07:21:44 -06:00
Gregory Nutt
eb1d4ca774
SAM3/4: Fixed configurations for TWI master. Obviously an incomplete port from SAMA5.
2017-04-23 07:17:55 -06:00
Gregory Nutt
a55e937643
Correct mispelling
2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
d8e4cbcfd5
Merge remote-tracking branch 'spiriou/wlan_dev' into photon
2017-04-22 08:26:40 -06:00
Jussi Kivilinna
325ba1a803
clock: add clock_resynchronize and use subseconds RTC
...
Add clock_resynchronize for better synchronization of CLOCK_REALTIME and CLOCK_MONOTONIC to match RTC after resume from low-power state.
Add up_rtc_getdatetime_with_subseconds under CONFIG_ARCH_HAVE_RTC_SUBSECONDS to allow initializing (and resynchronizing) system clock with subseconds accuracy RTC.
2017-04-21 08:45:57 -06:00
Juha Niskanen (Haltian)
c04c49dac0
Add support for the STM32F09X family.
2017-04-21 08:23:25 -06:00
Gregory Nutt
f902b8b058
Merge branch 'iob'
2017-04-20 16:09:14 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
73c7f05a3c
Cosmetic changes to spacing and comments.
2017-04-20 14:08:08 -06:00
Gregory Nutt
d0ec395c42
Correct some spacing and some unused definition in some irq.h header files.
2017-04-20 12:39:21 -06:00
Gregory Nutt
bb54449889
STM32F0: Add an untested port of the F1 USB device to the STM32F0
2017-04-20 11:50:58 -06:00
Gregory Nutt
20ddbd7368
STM32F0: Add support for HSI48
2017-04-20 11:08:23 -06:00
Gregory Nutt
a98cdc7a45
Add STM32F0 USB device header file; Update TODO list.
2017-04-20 09:31:12 -06:00
Juha Niskanen
9d0ecedf7d
Add support for STM32L152CC, STM32L152RC and STM32L152VC. Update some bits and comments for other STM32L1 parts in chip.h
2017-04-20 06:30:26 -06:00
Juha Niskanen
e631ee4582
STM32 L1: stm32l15xx_rcc: Allow board to configure HSE clock in bypass-mode. Allows using MCO output from ST-link chip (on Nucleo and Discovery boards) as HSE input.
2017-04-20 06:28:01 -06:00
Ian McAfee
6a2c43b0c1
SAMV7 EMAC: Add conditional logic to account the fact that the SAMV71 has 6 rather than 3 queues after version 1.
2017-04-19 14:32:28 -06:00
David Sidrane
29fe0a1b5f
Merged in david_s5/nuttx/upstream_stm32_warn (pull request #323 )
...
stm32:stm32_serial fixed warning
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-18 22:01:02 +00:00
David Sidrane
4844011b9c
stm32:stm32_serial fixed warning
2017-04-18 11:51:56 -10:00
David Sidrane
a0c4254168
Kinetis:Fixed warning
2017-04-18 10:04:54 -10:00
Gregory Nutt
27e212a291
Nucleo-F072RB: Various fixes to get the first clean build.
2017-04-18 10:37:05 -06:00
Gregory Nutt
b45472baf8
Nucleo-F072RB: Add board configuration
2017-04-18 10:07:03 -06:00
Gregory Nutt
8420e68a9b
STM32F0: The STM32F2 does not have use alternate function groupings as does the F1. Rather, it is like other members of the STM32 family with An alternate setting AF0-AF7 for each pin.
2017-04-18 08:40:14 -06:00
Gregory Nutt
04ebdbb336
Move: CONFIG_ADC_NO_START_CONV from drivers/adc/Kconfig to arch/arm/src/stm32[f7]/Kconfig as STM32[F7]_ADC_NO_START_CONV. Refresh all configurations with any reference to CONFIG_ADC_NO_START_CONV.
2017-04-18 07:16:35 -06:00
Juha Niskanen
3c0f3ea35b
STM32F7: stm32_adc: Do not override ADCPRE_DIV when measuring internal voltage
2017-04-18 06:51:20 -06:00
Juha Niskanen
54eae7dcde
STM32F7: warn if no DMA2 configured when using ADC with DMA. Also correct ADC channel numbers that DMA callback passes to upper half driver.
2017-04-18 06:49:51 -06:00
Gregory Nutt
de22d24f8e
More changes UART to USART. Fix garbage code in stm32f0_serial.h that was clearing HAVE_USART
2017-04-17 18:37:52 -06:00
Gregory Nutt
924f58fb2b
STM32F0: Change HAVE_UART to HAVE_USART
2017-04-17 17:53:04 -06:00
Gregory Nutt
acdc26f972
STM32F0: Add logic to enable other USARTs. No UART4/5. Rather USART4/5.
2017-04-17 17:51:05 -06:00
Gregory Nutt
639bf31eb4
Move enabling of GPIO peripherals form UART setup to clockconfig. This is not a UART function. It is needed by all periphrals.
2017-04-17 17:20:55 -06:00
Gregory Nutt
8b157b034d
STM32F0: Fixes to get STM32F0-Discovery build again after changes to support the STM32F07x
2017-04-17 17:13:32 -06:00
Gregory Nutt
2c01aaad59
STM32F0: Add basic support for STM32F07x family
2017-04-17 16:54:07 -06:00
Alan Carvalho de Assis
b0597583da
Fix System Clock value to 48MHz and remove MCLK definition
2017-04-17 12:48:07 -06:00
Alan Carvalho de Assis
735f4d6ea5
STM32F0: Enable the clock for all GPIO ports
2017-04-17 09:58:04 -06:00
Gregory Nutt
cd62425433
STM32F0: type of regval should be uint32_t in clockconfig(). Fix a warning from __start().
2017-04-17 09:17:31 -06:00
Gregory Nutt
55faedb40d
STM32F0: Ooops Missing semicolon
2017-04-17 08:57:00 -06:00
Gregory Nutt
0d9395588b
STM32F0: Fix an error in clockconfig()
2017-04-17 08:50:03 -06:00
phreakuencies
eac049222c
STM32: Provide TIM5 definition for STM32F429
2017-04-15 12:10:42 -06:00
Gregory Nutt
78bc1aa6bc
Argument of network device IOCTL should be unsigned long, just as will all other IOCTL methods.
2017-04-15 09:33:27 -06:00
Simon Piriou
11d3db5c35
photon: add sdpcm + thread support for wlan
2017-04-15 11:39:13 +02:00
Alan Carvalho de Assis
03cbf21cd8
Replace HAVE_USART with HAVE_UART
2017-04-14 11:44:51 -06:00
Alan Carvalho de Assis
4602212612
Fix serial compilation issues
2017-04-14 11:42:20 -06:00
Gregory Nutt
879273f63e
arch/arm/Kconfig: Add option for STM32F0
2017-04-14 09:32:15 -06:00
Alan Carvalho de Assis
2cc7744b0c
Add stm32f0discovery board support
2017-04-14 08:34:38 -06:00
Gregory Nutt
c910334ced
Make sure that Alan is listed as author in new files.
2017-04-14 08:34:37 -06:00
Alan Carvalho de Assis
c3e0ec369f
Add basic support for STM32F0
2017-04-14 08:34:36 -06:00
Sebastien Lorquet
dc2890904d
STM32L4 DMA: Correct bad channel definition.
2017-04-12 10:25:51 -06:00
Alan Carvalho de Assis
a58823c449
STM32XX: Fix Pending Register definition
2017-04-11 06:45:45 -06:00
Jussi Kivilinna
4c99a6aeec
STM32F7: serial: do not stop processing input in SW flow-control mode
2017-04-11 06:40:44 -06:00
Jussi Kivilinna
e9a8dc7c6e
STM32F7: serial: disallow broken configuration combination of CONFIG_STM32F7_FLOWCONTROL_BROKEN=y and CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS not set.
2017-04-11 06:39:27 -06:00
Gregory Nutt
ebd2416f9d
stm32 COMP: Logic in stm32_comp.h must be configured on CONFIG_STM32_COMP or otherwise it causes an error via #error on every platform without COMP support.
2017-04-09 11:47:57 -06:00
Masayuki Ishikawa
b4e01ecbf9
Merged in masayuki2009/nuttx.nuttx/fix_efm32_i2c_timeout (pull request #312 )
...
EFM32 I2C: Fix timeout calculation
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-04-06 22:59:34 +00:00
Jussi Kivilinna
e3b3e57e56
RTC: add interface for check if RTC time has been set
...
New interface allows checking if RTC time has been set. This allows to application to detect if RTC has valid time (after
reset) or should application attempt to get real time by other means (for example, by launching ntpclient or GPS).
2017-04-06 09:53:11 -06:00
Gregory Nutt
ac8ddf4eb1
SAMv7: In review of last patch, change literal 0xfff to WDT_MR_WDD_MAX for portability.
2017-04-06 09:46:04 -06:00
Frank Benkert
571f3d952e
SAMV7: Watchdog: fix Forbidden Window Value
...
According the Datasheet the WDD Value is the lower bound of a so called Forbidden Window and to disable this we have to set the WDD
Value greater than or equal to the WDV Value. This seems to be a bug in the datasheet. It looks like we have to set it to a greater value than the WDV to realy disable this Thing. When triggering the Watchdog faster than the (very slow) clock source of the Watchdog fires, this Forbidden Window Feature resets the System if WDD equals to WDV.
This Changeset disables the Forbidden Window by setting the WDD Value to the Maximum (0xfff) Value possible.
2017-04-06 09:43:07 -06:00
Jussi Kivilinna
0aa52d98a2
STM32F7: add warning for RXDMA + IFLOWCONTROL combination
...
Combination of RXDMA + IFLOWCONTROL does not work as one might expect.
Since RXDMA uses circular DMA-buffer, DMA will always keep reading new
data from USART peripheral even if DMA buffer underruns. Thus this
combination only does following: RTS is asserted on USART setup and
deasserted on shutdown and does not perform actual RTS flow-control.
Data loss can be demonstrated by doing long up_mdelay inside irq
critical section and feeding data to RXDMA+IFLOWCONTROL UART.
2017-04-06 08:47:45 -06:00
Jussi Kivilinna
e2702cbe4e
STM32F7: fix UART7 and UART8 IFLOWCONTROL options
2017-04-06 08:46:24 -06:00
Jussi Kivilinna
dabf45f100
STM32F7: default CONFIG_STM32F7_DMACAPABLE to 'n'. STM32F7 does not have CCM RAM but DTCM, so this option does not need to enabled. DTCM RAM is DMA-able through CPU AHBS bus.
2017-04-06 08:44:53 -06:00
Jussi Kivilinna
e180522854
stm32f7: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart
2017-04-06 08:41:41 -06:00
Alan Carvalho de Assis
95941b4908
STM32: Fix SYSCFG_CFGR1_I2C_PBXFMP_SHIFT value
2017-04-06 08:35:33 -06:00
Masayuki Ishikawa
f5b6ae627d
EFM32 I2C: Fix timeout calculation
2017-04-06 17:12:13 +09:00
Simon Piriou
e5c4a28c3a
photon: wlan support
2017-04-05 21:55:21 +02:00
Juha Niskanen
3e6b92d5fa
tm32: stm32l15xxx_rcc: configure medium performance voltage range and zero wait-state when allowed by SYSCLK setting
...
Zero wait-state for flash can be configured when:
Range 1 and SYSCLK <= 16 Mhz
Range 2 and SYSCLK <= 8 Mhz
Range 3 and SYSCLK <= 4.2 Mhz
Medium performance voltage range (1.5V) can be configured when SYSCLK is up to 16 Mhz and PLLVCO up to 48 Mhz.
2017-04-05 07:41:25 -06:00
