pnb
badc0c2215
Merge remote-tracking branch 'upstream/master'
2015-12-22 13:29:31 +01:00
pnb
0ef3dc81aa
Merge branch 'master' of bitbucket.org:pnb990/nuttx-kernel-arch
2015-12-22 13:28:39 +01:00
pnb
7d244d4d04
Revert "add timer capture STM32"
...
This reverts commit 7a484f4d7665c533998d6893c21b69340038b5fc.
2015-12-22 13:27:42 +01:00
pnb
764c9ea887
Revert "used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture"
...
This reverts commit 08600d05eb12cb4f62280766b7f780e8eaa2284b.
2015-12-22 13:27:35 +01:00
pnb
573462e355
Revert "continue capture integration"
...
This reverts commit c0b6ba73d59dc973d6984bce12ff4a20d870de2a.
2015-12-22 13:27:00 +01:00
pnb
406bc5e67e
continue capture
2015-12-22 13:26:22 +01:00
Gregory Nutt
3e4fb7a60d
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #42 )
...
STM32 ADC: Add DMA support for STM32F30xxx
2015-12-22 05:45:10 -06:00
pnb
f88e62c8e9
continue capture
2015-12-22 12:21:03 +01:00
Paul A. Patience
754a4ddb98
STM32 ADC: Add DMA support for STM32F30xxx
2015-12-22 03:42:37 -05:00
Gregory Nutt
d7af5b234c
Fix an error in pre-processor condition
2015-12-21 21:36:34 -06:00
Gregory Nutt
860a2fc786
TMS570: Add interrupt decode logic
2015-12-21 12:17:26 -06:00
Gregory Nutt
092c681157
TMS570: Add a little more IRQ/FIQ logic
2015-12-21 10:57:01 -06:00
Lok Tep
74c4f4636a
adc initerrupts
2015-12-21 17:23:07 +01:00
Gregory Nutt
caad954b01
TMS570: Add VIM header file
2015-12-21 07:40:27 -06:00
Gregory Nutt
010a73d3b6
TMS570: A little more selftest structure
2015-12-20 17:55:21 -06:00
Gregory Nutt
a2fb50d812
TMS570: Add a framework that will eventually support self-test
2015-12-20 11:51:36 -06:00
Gregory Nutt
2629053bbe
TMS570: Add pin multiplexing logic
2015-12-20 10:14:51 -06:00
pnb
510dc7872d
Merge remote-tracking branch 'upstream/master'
2015-12-20 13:00:17 +01:00
pnb
2f78c0c1bc
continue capture integration
2015-12-20 12:54:21 +01:00
Gregory Nutt
b69c91a8a8
TMS570: Add empty, stub interrupt initialization logic
2015-12-19 19:06:30 -06:00
Gregory Nutt
63d5032d3b
TMS4570: Was not building arm_head.S or up_allocateheap.c; ARMv7-R: Fix variious problems not that arm_head.S is being built
2015-12-19 18:56:23 -06:00
Gregory Nutt
4d99e2b0e6
TMS570: Add FLASH wait state configuration
2015-12-19 16:33:39 -06:00
Gregory Nutt
c9c473997c
TMS570: Add ECLK setup
2015-12-19 15:56:00 -06:00
Gregory Nutt
d7595446bf
TMS570: More clock configuration logic
2015-12-19 13:15:26 -06:00
Gregory Nutt
2bd1be6c96
TMS570: Use values from TI OTP to set LPO trim value
2015-12-19 11:40:38 -06:00
Gregory Nutt
fac00f04d0
TMS570: Add a FLASH controller header file
2015-12-19 09:01:24 -06:00
Gregory Nutt
1ddabf9ff1
TMS570: Add peripheral initialization logic
2015-12-19 08:10:21 -06:00
Gregory Nutt
3a6aa75d15
TMS570: Initial PBIST register definitions
2015-12-18 20:36:06 -06:00
Gregory Nutt
834c2baf40
TMS570: Add SCI header file
2015-12-18 19:52:08 -06:00
Gregory Nutt
727f0f47d6
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #40 )
...
STM32 PWM: Fix timer type bug
2015-12-18 18:47:41 -06:00
Gregory Nutt
50205b4342
TMS570: Add some basic PLL configuration logic
2015-12-18 18:24:53 -06:00
Gregory Nutt
aa524024d0
Add a few more TMS570 SYS register bit definitions
2015-12-18 11:15:16 -06:00
Gregory Nutt
0403132800
TMS570: Add selftest configuration option; Add a few more SYS register definitions
2015-12-18 09:09:58 -06:00
Gregory Nutt
d4b7bf59d0
TMS570: More start-up logic
2015-12-18 08:57:29 -06:00
Gregory Nutt
f55ff3a3c5
TMS570: Add PBIST header file
2015-12-18 06:55:43 -06:00
Gregory Nutt
e7b48d264b
TMS570: Separate SYS register definitions into SYS, STS2, and PCR
2015-12-18 06:39:19 -06:00
Gregory Nutt
1ff36b19e8
TMS570: Misc, minor updates
2015-12-17 15:31:58 -06:00
Gregory Nutt
0405ac92a2
TMS570: Add SYS register definitions (incomplete)
2015-12-17 15:30:54 -06:00
Gregory Nutt
4bdc22d7e2
TMS570: Eliminate some warnings
2015-12-17 12:57:48 -06:00
Gregory Nutt
0f7f364865
TMS570: Correct a few problems introduced in previous commits
2015-12-17 12:52:15 -06:00
Gregory Nutt
6baccab3ae
Need to select MEMINIT if TMS570 selected
2015-12-17 12:40:24 -06:00
Gregory Nutt
3f964ab20c
SR4 is the same as SR1-3
2015-12-17 12:28:45 -06:00
Gregory Nutt
add1754dcc
TMS570: Add ESM header file
2015-12-17 12:17:48 -06:00
Gregory Nutt
cd0baf490f
Fix Kconfig: BOOT_SDRAM_DATA, not CONFIG_BOOT_SDRAM_DATA
2015-12-17 10:50:53 -06:00
Gregory Nutt
c251fd7756
ARMv7-R: Add a configuration to support delayed memory initialization. This logic was already in place for SDRAM but is also required for some ECC memories as well.
2015-12-17 10:49:56 -06:00
Gregory Nutt
9364824a53
ARMv7-R: Add logic to work-around errata, remove logic to access VBAR since this is no VBAR and add logic to access PMCR. TMS570: Add logic to set debug bits in PMCR
2015-12-17 09:34:38 -06:00
pnb
e25bc48d01
used DEFINE instead of setcapturecfg function to set filter and prescaler of input capture
2015-12-16 23:42:43 +01:00
pnb
701c386299
add timer capture STM32
2015-12-16 21:39:51 +01:00
Gregory Nutt
5794675247
TMS570: Memory map applies only to LS04x and LS03x. Peripheral numbering seems to start with 1, not 0
2015-12-16 14:10:45 -06:00
Gregory Nutt
9f9cb00104
TMS570: Remove some garbage left in Kconfig file
2015-12-16 12:46:42 -06:00
Gregory Nutt
f310887bb9
TMS570: Add memory map and peripheral selection logic
2015-12-16 11:06:14 -06:00
Gregory Nutt
521ae00387
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-16 09:03:55 -06:00
Gregory Nutt
bacf7cf07e
ARMv7-R: fix some issues to get a clean compilation; TMS570: Add enough logic to support a minimum build. Not much there on the initial commit
2015-12-16 09:03:14 -06:00
Gregory Nutt
aa1e67ffe7
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-15 17:16:02 -06:00
Gregory Nutt
8cabb844ab
TMS570: Hook into build/configuration system
2015-12-15 17:15:37 -06:00
Gregory Nutt
1cd73ec861
Merged in paulpatience/nuttx-arch/stm32_qencoder (pull request #41 )
...
STM32 QEncoder: Add support for STM32F30xxx
2015-12-15 14:13:44 -06:00
Gregory Nutt
a6e035baeb
TMS570: Add arch/arm/include/tms570 header files
2015-12-15 13:41:12 -06:00
Paul A. Patience
377d29f1a1
STM32 QEncoder: Add support for STM32F30xxx
2015-12-15 12:13:37 -05:00
Gregory Nutt
26883fc7b9
Merged in paulpatience/nuttx-arch/stm32_tim (pull request #39 )
...
STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes
2015-12-14 16:59:51 -06:00
Gregory Nutt
8fb76cf970
TMS570: Add a place holder for the TMS570. Not much there yet
2015-12-14 16:38:05 -06:00
Paul A. Patience
b7e8e1fb99
STM32 TIM: Remove some warnings, fix timer resolution bug and cosmetic changes
2015-12-14 17:24:11 -05:00
Paul A. Patience
7274084540
STM32 PWM: Fix timer type bug
2015-12-14 17:21:55 -05:00
Gregory Nutt
c1933a0814
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 15:44:12 -06:00
Gregory Nutt
1169ff6dbd
MPU: Add support for separated vs. unified MPU
2015-12-14 15:41:18 -06:00
Gregory Nutt
b3502af042
ARMv7-M: Add MPU support
2015-12-14 15:38:58 -06:00
Gregory Nutt
290e5058ea
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 13:58:08 -06:00
Gregory Nutt
dfec6a0dd0
Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU
2015-12-14 13:56:21 -06:00
Gregory Nutt
09f79919b5
ARMv7-R: Review/update CPSR bit definitions
2015-12-14 13:19:22 -06:00
Gregory Nutt
3f5d4fc136
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 13:04:47 -06:00
Gregory Nutt
1f05f49e66
ARMv7-A: Update some co-processor register naming
2015-12-14 13:04:03 -06:00
Gregory Nutt
39cace15a1
Update CP15 access macros
2015-12-14 13:02:54 -06:00
Gregory Nutt
7475712d87
ARMv7-R: Review/update cache operations
2015-12-14 12:32:32 -06:00
Gregory Nutt
c1e14b0a6b
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 11:57:10 -06:00
Gregory Nutt
6e9aa0a1d7
ARMv7-A/M: Cosmetic changes
2015-12-14 11:56:39 -06:00
Gregory Nutt
b9feaf13b0
Update ARMv7-R system control register definitions from TRM
2015-12-14 11:54:58 -06:00
Gregory Nutt
cbc2f226c0
Merged in paulpatience/nuttx-arch/stm32_pinmap (pull request #38 )
...
STM32: Fix typos in pinmaps
2015-12-14 08:59:47 -06:00
Gregory Nutt
b7024fd202
Merged in paulpatience/nuttx-arch/stm32f30xxx_pinmap (pull request #37 )
...
STM32: Fix typos in STM32F30xxx pinmap
2015-12-14 08:58:34 -06:00
Gregory Nutt
67604e661f
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 08:43:29 -06:00
Gregory Nutt
edecfc2dac
ARMv7-A: Cosmetic changes
2015-12-14 08:42:39 -06:00
Paul A. Patience
89da1f27dd
STM32: Fix typos in pinmaps
2015-12-14 09:41:49 -05:00
Gregory Nutt
5585f44b7e
Add initial support for ARMv7-R architecture. Initial commit is largely a clone of ARMv7-A and needs further review
2015-12-14 08:40:38 -06:00
Paul A. Patience
7589e940b6
STM32: Fix typos in STM32F30xxx pinmap
2015-12-14 09:36:28 -05:00
Gregory Nutt
cd8d37f46b
Eliminate a warning
2015-12-12 11:37:25 -06:00
Gregory Nutt
412c7c83a1
Forgot to add a file in the last commit
2015-12-12 09:37:01 -06:00
Gregory Nutt
daea1e614b
All architectures need to build ELF support if either CONFIG_ELF or CONFIG_MODULE are selected. Cortex-M7 also must support module cache corherence
2015-12-12 09:35:05 -06:00
Gregory Nutt
ead6656a35
SAMV7 USBHS device: Beef up test for data sent in DMA complete interrupt handler
2015-12-11 08:28:49 -06:00
Gregory Nutt
cb5c221ce7
Update a few comments
2015-12-10 06:32:27 -06:00
Gregory Nutt
a0594ec60e
SAMV7 USBHS device: Last change fixed certain problems and introduced some new ones. Here is an untested fix to address all known problems
2015-12-09 14:19:14 -06:00
Gregory Nutt
c26a624a9f
SAMA5: Backport some USB device ZLP logic from the SAMV7
2015-12-08 17:36:46 -06:00
Gregory Nutt
9135afa8c1
SAMV7 USBHS device: End of DMA is too soon to process ZLP. Wait for TXINI
2015-12-08 13:21:43 -06:00
Gregory Nutt
cd7c22bbd4
SAMV7: Trivial correcto to last USBHS device change when using huge request buffers
2015-12-08 11:10:16 -06:00
Gregory Nutt
19520b5c2c
SAMV7 USBHS device: Fix check if zero lenght packet is needed
2015-12-08 10:11:44 -06:00
Lok Tep
1481537f8c
config B option, reverted
2015-12-08 09:27:23 +01:00
Lok Tep
6c872c3162
ssp in pin buffer fix
2015-12-07 23:13:14 +01:00
Lok Tep
8ddb2a6a2a
ssp buffer check fix
2015-12-07 23:12:57 +01:00
Lok Tep
264fbc1ecc
CONFIG_I2C_RESET dummy function
2015-12-07 23:12:40 +01:00
Gregory Nutt
927b1dcc1f
Initialize the telnet factory as part of the common architecture intialization
2015-12-07 11:40:29 -06:00
Gregory Nutt
8df99623aa
SAMV7: For to add RSWDT driver before committing
2015-12-06 16:41:10 -06:00
Gregory Nutt
6a9876f960
SAMV7: Add an untested RSWDT driver
2015-12-06 09:56:45 -06:00
Gregory Nutt
8f55ec5c69
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
2015-12-06 09:29:51 -06:00
Gregory Nutt
347bb86045
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
2015-12-06 08:53:31 -06:00
Gregory Nutt
3afc0799ad
Eliminate a warning
2015-12-05 10:35:11 -06:00
Gregory Nutt
52601d9da8
SAMV7: Add support for PCK6 as a timer/counter clock source
2015-12-04 10:49:20 -06:00
Lok Tep
82c865e2b0
init global interrupt in timer mode
2015-12-04 10:23:29 +01:00
Gregory Nutt
9d769f6056
SAMV7: Extend programmable clock support for queries about the PCK configuration
2015-12-03 14:11:39 -06:00
Gregory Nutt
8c4302f75d
Bring programmable clock logic from SAMA5 to SAMV7
2015-12-03 10:22:11 -06:00
Gregory Nutt
1399e00166
SAMV7: Fix some issues with lost timer/counter interrupts
2015-12-02 18:09:23 -06:00
Gregory Nutt
2300273a07
SAMV7 TC: Some trivial improvements
2015-12-02 15:53:51 -06:00
Gregory Nutt
9a54702d99
SAMV7: Revise timer driver. SAMA5 has one pid/interrupt per timer/counter; SAMV7 has a pid/interrupt per channel
2015-12-02 14:09:34 -06:00
Gregory Nutt
192772b7ee
SAMV7: Add support for CONFIG_SCHED_TICKLESS_LIMIT_MAX_SLEEP
2015-12-02 09:21:34 -06:00
Gregory Nutt
3ce3dbc6ed
SAMV7: Ported tickless logic from the SAMA5/SAM4CM to the SAMV7
2015-12-02 08:26:33 -06:00
Gregory Nutt
02c57c22f8
SAMA5: Misc clean from review while porting some logic to the SAMV7
2015-12-02 08:25:23 -06:00
Gregory Nutt
bda05b312e
SAMV7: Port the SAMA5 timer/counter driver to the SAMV7
2015-12-02 07:18:25 -06:00
Gregory Nutt
975ea3e677
SAMA5: Fix a typo in timer/counter setup
2015-12-02 07:17:17 -06:00
Lok Tep
f02d3808a3
compile spifi with vpath
2015-12-02 12:51:45 +01:00
Gregory Nutt
6734c91a05
SAMV7 USB: Add some warnings to avoid certain bad configuration selections
2015-12-02 05:30:10 -06:00
Gregory Nutt
754aace61b
STM32: CCM procfs more typos
2015-12-01 16:28:14 -06:00
Gregory Nutt
bc74aa322b
STM32: Fix a couple of typos in STM32 CCM procfs
2015-12-01 16:20:51 -06:00
Lok Tep
fd74d0b625
spifi
2015-12-01 23:09:31 +01:00
Gregory Nutt
1f82dda9d8
Clean up some naming
2015-12-01 15:04:12 -06:00
Gregory Nutt
548ba1640f
STM32: CCM procfs is no longer a part of the 'base' procfs entries and can now only be supported via run time registration with CONFIG_FS_PROCFS_REGISTER=y
2015-12-01 14:55:05 -06:00
Lok Tep
9a527ad3ed
adc: timer mode
2015-12-01 14:53:52 +01:00
Gregory Nutt
7037f13c2d
Trivial cosmetic change from review
2015-11-30 18:01:26 -06:00
Wail Khemir
fd8db7ad38
Change prescaler dynamically to support bigger periods on 16 bits timers
2015-11-30 18:52:05 -05:00
Gregory Nutt
5367c5993c
SAMV7: Add some conditional logic to handle the case where the board has no 32.768KHz crystal installed
2015-11-30 15:21:25 -06:00
Gregory Nutt
e421258808
Move sim/src/up_appinit.c to configs/sim/src where it really belongs
2015-11-29 13:54:03 -06:00
Gregory Nutt
4d2299896e
SAMV7: Add support to network device statistics to the Ethernet driver
2015-11-27 12:30:15 -06:00
Gregory Nutt
8ce454a584
Remove some warnings; eliminate unused variables
2015-11-26 12:46:53 -06:00
Gregory Nutt
e5e631e57f
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:07:18 -06:00
Gregory Nutt
2afd4595e4
Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES
2015-11-26 06:59:35 -06:00
Gregory Nutt
22b4932a4f
__KERNEL__ should be defined when compiler architecture specific logic
2015-11-25 18:06:56 -06:00
Gregory Nutt
4aa3dcb51a
__KERNEL__ should be defined when compiler architecture specific logic
2015-11-25 18:05:36 -06:00
Gregory Nutt
f4e8f84887
__KERNEL__ should be defined when compiler architecture specific logic
2015-11-25 17:52:14 -06:00
Gregory Nutt
14d7ede265
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
2015-11-25 17:10:41 -06:00
Lok Tep
dd4ef7b2e9
rename to offset
2015-11-25 21:07:14 +01:00
Lok Tep
70ab09976a
setup out with data
...
ep 5-6
fixex
2015-11-25 21:07:00 +01:00
Gregory Nutt
b1e17d8892
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
2015-11-25 12:51:07 -06:00
Ken Pettit
641ca79321
arch/sim/src: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
2015-11-25 08:36:44 -06:00
Gregory Nutt
d7c5ff98f4
Fix a typo
2015-11-23 18:55:38 +00:00
Gregory Nutt
edb1439d8f
Last change introduced warnings when CONFIG_SIM_M32=y; This fixes those warnings too
2015-11-23 12:44:59 -06:00
Gregory Nutt
076b05b460
In Kconfig of all CPUs with 16-bit address, force CONFIG_MM_SMALL=y
2015-11-23 12:16:35 -06:00
Gregory Nutt
9f98dfecb7
sim: Eliminate a warning
2015-11-23 11:59:33 -06:00
Gregory Nutt
30834721df
Trivial changes for compliance with coding standard
2015-11-20 17:53:03 -06:00
Wail Khemir
702368fce4
Small bug fix for stm32 lower half timer driver
2015-11-20 18:16:39 -05:00
Gregory Nutt
25a2e17347
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:04 -06:00
Gregory Nutt
25e54726a3
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
2015-11-18 14:33:27 -06:00
Ken Pettit
992d7d1e85
arch/sim/src/up_spiflash.c: Add support for W25 FLASH simulation. From Ken Petit
2015-11-18 07:08:38 -06:00
Gregory Nutt
a6d6c430d9
Changes to last merge from review for compliance to coding standards
2015-11-17 21:10:17 -06:00
Marwan Ragab
4999c14085
Added implementation to get 96-bit stm32 unique id
2015-11-17 21:34:41 -05:00
Gregory Nutt
a8ab72f97a
Fix some stylistic issues found by tools/nxstyle
2015-11-17 17:31:38 -06:00
Gregory Nutt
3c84aa3b5f
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
2015-11-17 16:53:21 -06:00
Wail Khemir
9451b09d3a
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:57:02 -05:00
Lok Tep
5d689fedcf
spifi regs
2015-11-17 18:02:08 +01:00
Gregory Nutt
88ebcc895b
Fix some spacing problems found by tools/nxstyle.c
2015-11-15 10:47:42 -06:00
Gregory Nutt
bd384d93eb
SAMV7 MCAN: Cosmetic change
2015-11-15 08:38:27 -06:00
Lok Tep
0d1ba69ba8
Merge remote-tracking branch 'origin/master'
2015-11-15 12:55:21 +01:00
Lok Tep
386939c8af
roght ram bank
2015-11-15 12:52:57 +01:00
Gregory Nutt
82b6c8aed7
Add SAME70 to arm/arch/src/samv7/Kconfig
2015-11-14 13:35:24 -06:00
Gregory Nutt
39362feee0
arch/arm/src/samv7: Add pin configuratinos for SAME70. Not all verified. I assume that the SAME70 pin mapping is identical to the SAMV71 minus MediaLB pins
2015-11-14 12:14:27 -06:00
Gregory Nutt
58615a4e69
arch/arm/src/samv7: Add SAME70 memory map
2015-11-14 12:01:28 -06:00
Gregory Nutt
38a3d24706
arch/arm/src/samv7: Add support for SAME70 peripheral clocks
2015-11-14 11:41:53 -06:00
Gregory Nutt
0add2b8910
arch/arm/include/samv7: Add support for the SAME70 family
2015-11-14 11:36:21 -06:00
Gregory Nutt
ba57b5bdc0
SAMV7 FLASH: Fix a cache error, fix an address comparison
2015-11-13 11:32:06 -06:00
Gregory Nutt
a1e9a07c7a
SAMV7 progmem: Debug fixes from intial testing
2015-11-13 09:18:26 -06:00
Gregory Nutt
4ecf9b5bec
SAMV7 FLASH driver now at least compiles
2015-11-12 12:26:53 -06:00
Gregory Nutt
1593cd7149
SAMV7 flash logic is complete, uncompiled, and untested
2015-11-12 10:46:59 -06:00
Gregory Nutt
78153004ee
SAMV7: Don't call can_txdone with the device locked. This can lead to deadlocks on subsequent actions from the upper half can driver
2015-11-12 07:58:09 -06:00
Frank Benkert
54cff3c5ae
SAMV7 MCAN: Remove forcing of transfer complete interrupt
2015-11-12 07:35:01 -06:00
Gregory Nutt
b05fb671ff
Trivial simplification to logic of last commit
2015-11-11 15:17:36 -06:00
Gregory Nutt
003e022ce9
SAMV7 QSPI: Check if data to be transferred is unaligned; If unaligned, don't use DMA
2015-11-11 14:29:28 -06:00
Paul A. Patience
52454cf79b
Fix typo
2015-11-11 13:06:15 -05:00
Gregory Nutt
3964b4ac57
SAMV7: Add framework for on-chip FLASH access
2015-11-11 10:07:41 -06:00
Gregory Nutt
11e89f5a7b
Cosmetic changes from code review
2015-11-11 07:41:51 -06:00
Gregory Nutt
518b4b14b2
Merged in petekol/arch (pull request #31 )
...
forgotten changes
2015-11-11 07:38:38 -06:00
Gregory Nutt
50b96b3f50
Review of previous commit for coding style. Tickless RIT logic still does not follow naming conventions or file format rules
2015-11-11 07:36:41 -06:00
Lok Tep
485d317401
forgotten changes
2015-11-11 14:22:22 +01:00
Lok Tep
3e33d18cac
Merge remote-tracking branch 'origin/master'
2015-11-11 13:48:53 +01:00
Lok Tep
67c5d07e83
usb/ssp initialization corrected
2015-11-11 13:47:21 +01:00
Lok Tep
f4d06f512f
Merged nuttx/arch into master
2015-11-11 13:40:09 +01:00
Gregory Nutt
45549cb2e2
Change some debug output to verbose
2015-11-10 12:15:22 -06:00
Gregory Nutt
d95da886f3
Cosmetic changes to comments
2015-11-10 11:31:00 -06:00
Lok Tep
5eff3a202b
Merge remote-tracking branch 'origin/master'
2015-11-09 23:47:33 +01:00
Lok Tep
b654a6f467
alarm
2015-11-09 21:01:32 +01:00
Gregory Nutt
f080b43b80
SAMV7 QSPI: Improved debug output
2015-11-09 13:32:58 -06:00
Lok Tep
3b4c71ef8d
more revert
2015-11-09 14:51:00 +01:00
Lok Tep
a8416d2a26
revert
2015-11-09 14:41:08 +01:00
Lok Tep
1f8c0fdcdb
timer base name difference
2015-11-09 14:34:59 +01:00
Lok Tep
7d386866af
Merged nuttx/arch into master
2015-11-09 14:24:41 +01:00
Gregory Nutt
612ebdeabd
Kconfig: Set default number of MPU regions to 16 for Cortex-M7
2015-11-08 06:59:35 -06:00
Gregory Nutt
352d2a1d02
SAMV7 XDMAC: Don't sample interrupt status registers in debug mode. This can cause loss of interrupts
2015-11-07 11:25:20 -06:00
Gregory Nutt
dd69967934
SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized
2015-11-07 09:35:23 -06:00
Gregory Nutt
2e99311fb4
SAMV7 QSPI: DMA transfer width should be 32- not 16-bits
2015-11-07 09:34:40 -06:00
Gregory Nutt
7b3c0ac7bc
ARMv7-M: Cosmetic fixes to some file headers
2015-11-06 13:37:37 -06:00
Gregory Nutt
b4b0dde792
SAMV7 QSPI: Back out some kludges that are no longer necessary
2015-11-06 13:02:45 -06:00
Gregory Nutt
17c8cbceaf
SAMV7 QSPI: Rounding up buffer length for memcpy style transfer is un-necessary
2015-11-06 12:59:40 -06:00
Gregory Nutt
553ba1a682
SAMV7 QSPI: When QSPI is enabled, make the QSPI memory strongly ordered
2015-11-06 12:10:15 -06:00
Gregory Nutt
771095e25f
ARMv7-M: Add MPU support for strongly couple memory regions
2015-11-06 11:50:57 -06:00
Gregory Nutt
1c79e77811
ARMv7-M: Minor naming change to improve readability
2015-11-06 11:24:52 -06:00
Gregory Nutt
4371b756df
SAMV7: Add MPU and protected build support
2015-11-06 11:12:28 -06:00
Gregory Nutt
dff502d99b
SAMV7 QSPI: Costmetic changes
2015-11-05 15:03:53 -06:00
Gregory Nutt
e866cdd6f1
Fix missed closing comment in last commit
2015-11-05 10:43:49 -06:00
Gregory Nutt
68ae17a8a7
SAMV7 QSPI: Various kludges added during debug of QSPI. I am not if any of these are really correct
2015-11-05 10:32:13 -06:00
Gregory Nutt
f49e862db5
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #29 )
...
STM32 ADC: Add support for STM32F30xxx
2015-11-05 09:28:34 -06:00
Paul A. Patience
7d793bb99b
STM32 ADC: Add support for STM32F30xxx
2015-11-05 10:13:58 -05:00
Frank Benkert
9cbbfe7e59
SAMV7 MCAN: Fix receipt of RTR requests. From Frank Benkert
2015-11-04 08:03:27 -06:00
Gregory Nutt
1299160d1d
SAMV71-XULT: Add call to can_txready() to MCAN driver. This is part of a fix to a CAN hang problem
2015-11-03 10:47:37 -06:00
Lok Tep
24f1155d76
compile fixes
2015-11-02 23:34:32 +01:00
Gregory Nutt
c90876ff9c
SAMV7: Add configuration support (only) for use of USART as SPI
2015-11-02 13:58:19 -06:00
Lok Tep
30cea64430
fixes
2015-11-02 17:41:03 +01:00
Gregory Nutt
f6d7da24a7
SAM4CM should advertise that it supports Tickless operation in Kconfig
2015-11-02 06:39:24 -06:00
Gregory Nutt
96cee3709a
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28 )
2015-11-01 16:51:32 -06:00
Lok Tep
08224b8606
after debug
2015-11-01 23:11:37 +01:00
Paul A. Patience
4c2c989838
STM32 PWM: Add support for multiple output channels
2015-11-01 17:11:35 -05:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
pnb
d1b4d55343
pwm duty can by zero
2015-11-01 14:45:12 +01:00
Gregory Nutt
d6d834be5b
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #25 )
...
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 09:07:28 -06:00
pnb
0090cfe6d4
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 16:00:24 +01:00
pnb
668c56b1a6
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:42:00 +01:00
v01d
79fad2843a
lpc4337: WIP
2015-10-30 20:15:18 -03:00
Lok Tep
3a4b0e12a1
tickless
2015-10-30 17:37:40 +01:00
Gregory Nutt
22ea50464f
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23 )
...
Enhance STM32 QEncoder driver with configurable input filters
2015-10-22 18:28:22 +08:00
Gregory Nutt
e3d44ace60
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22 )
...
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
2015-10-22 18:26:53 +08:00
Gregory Nutt
04705d14df
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21 )
...
Add EXTI definitions for STM32F373
2015-10-22 18:21:45 +08:00
Gregory Nutt
2b078150e8
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20 )
...
Add support for STM32F429N (TFBGA) chip
2015-10-22 18:19:52 +08:00
Gregory Nutt
c87c50df14
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19 )
...
Fix setup of PLLSAI in STM32F4xx.
2015-10-22 18:17:21 +08:00
Lok Tep
b91fbed6a6
address 7->8
2015-10-21 17:35:52 +02:00
Marten Svanfeldt
3299a31b27
Enhance STM32 QEncoder driver with configurable input filters
...
Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can
potentially be insufficient in noisy environments, or too slow for really
fast encoder sources, so let the user set it from the Kconfig file
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 11:06:01 +08:00
Marten Svanfeldt
fdb484f24e
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:56:36 +08:00
Marten Svanfeldt
d1c7e5b5fb
Fix setup of PLLSAI in STM32F4xx.
...
To correctly setup the PLLSAI register it is required to first mask out
the old PLL divisor and multiplier factors before setting new ones
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:33:39 +08:00
Marten Svanfeldt
4d879a33ee
Add support for STM32F429N (TFBGA) chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:30:57 +08:00
Marten Svanfeldt
54b333dcd3
Add EXTI definitions for STM32F373
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:22:41 +08:00
Frank Benkert
4ac10f53d7
Reconfigure System I/O when using USART1
2015-10-20 05:58:34 +08:00
Frank Benkert
78669f20f2
SAMV7 MCAN: ix switched assertion check for TSEG1 and TSEG2 in CANIOC_SET_BITTIMING
2015-10-18 08:14:10 +08:00
Gregory Nutt
c340185cb3
arch/sim: Fix spacing/alignment issues
2015-10-14 07:14:28 -06:00
Gregory Nutt
4a46a872bd
arch/mips: fix some spacing and alignment issues
2015-10-12 08:18:03 -06:00
Paul A. Patience
08175bef58
STM32 PWM: Add ifdef for STM32F30XX
2015-10-09 17:20:42 -04:00
Gregory Nutt
a326b79b25
Merged in paulpatience/nuttx-arch (pull request #17 )
...
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 14:13:02 -06:00
Paul A. Patience
253e112b4a
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 13:47:22 -04:00
Max Kriegler
a20a61caef
STM32 F4: Correct pin mapping for TIM12 Channel 2
2015-10-09 10:32:46 -06:00
Gregory Nutt
d90f597a05
More spacing/alignment issues
2015-10-08 19:31:58 -06:00
Gregory Nutt
ef5f3dcff4
SAM3/4 RTC: Fix a bungled change from a recent commit
2015-10-08 19:21:35 -06:00
Lok Tep
5983019a45
merge from nuttx
2015-10-08 22:57:34 +02:00
Gregory Nutt
beb060d422
Yet more spacing issues
2015-10-07 20:24:19 -06:00
Gregory Nutt
a92842906f
STM32: Fix a search-and-replace error in previous commit
2015-10-07 19:58:05 -06:00
Gregory Nutt
a73d266469
AVR: Fix some spacing issues
2015-10-07 16:24:54 -06:00
Gregory Nutt
20d87b38de
Tiva: Fix some cosmetic spacing issues
2015-10-07 15:57:49 -06:00
Gregory Nutt
4f2119b3f4
STR7: Correct some spacing issues
2015-10-07 14:22:01 -06:00
Gregory Nutt
7dbfae87ec
STM32 F7: Correct some spacing issues
2015-10-07 13:58:11 -06:00
