Gregory Nutt
|
4d07c15932
|
Add OV2640 camera support to test the SAMA5 ISI peripheral
|
2013-12-09 10:51:22 -06:00 |
|
Gregory Nutt
|
ae044a485c
|
pcDuino: More changes to get the code fragments that are in place building successfully
|
2013-12-07 16:44:23 -06:00 |
|
Gregory Nutt
|
22fefb59da
|
Add board support infrastructure for the pcDuino board. There is not much there on the initial checkin
|
2013-12-07 14:25:35 -06:00 |
|
Gregory Nutt
|
7b6b2bbd7c
|
Minor updates to comments and README files
|
2013-12-07 07:00:48 -06:00 |
|
Gregory Nutt
|
08e027b42f
|
SAMA5 NAND: bugfixes
|
2013-12-06 11:34:29 -06:00 |
|
Gregory Nutt
|
692b087d07
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
Gregory Nutt
|
422b225401
|
Cosmetic updates to comments and READMEs
|
2013-12-04 16:41:45 -06:00 |
|
Gregory Nutt
|
ae01f868b2
|
SAMA5 NAND: Fix some PMECC setup logic
|
2013-12-04 11:56:56 -06:00 |
|
Gregory Nutt
|
68ccbc0855
|
Add drivers/mtd/README.txt
|
2013-12-04 07:46:10 -06:00 |
|
Gregory Nutt
|
80841d135d
|
SAMA5 NAND: Updated README and configuration logic
|
2013-12-03 14:32:59 -06:00 |
|
Gregory Nutt
|
e90d6cf262
|
Updated README
|
2013-12-03 13:26:09 -06:00 |
|
Gregory Nutt
|
2318531d93
|
Condition out most of the recent NXFFS changes for NAND. NXFFS will never be able to support NAND
|
2013-12-03 13:11:11 -06:00 |
|
Gregory Nutt
|
875b49913a
|
SAMA5 NAND: Only CS3 can have NAND
|
2013-12-03 06:59:22 -06:00 |
|
Gregory Nutt
|
0d8ac38e59
|
SAMA5D3x-EK: Cosmetic improvements to the NOR boot printfs; updated README
|
2013-12-02 17:22:55 -06:00 |
|
Gregory Nutt
|
5b9d07e5c0
|
NXFFS: When dumping the MTD content, don't abort on a read error. For NAND, the read error probably just means that an uncorrectable ECC was encountered
|
2013-12-01 20:17:09 -06:00 |
|
Gregory Nutt
|
5f76fe9cb4
|
SAMA5 NAND: Basic NAND access now work (software ECC and no DMA)
|
2013-12-01 18:21:41 -06:00 |
|
Gregory Nutt
|
360a451268
|
ViewTool STM32F107: Basic NSH checks out okay
|
2013-12-01 10:05:40 -06:00 |
|
Gregory Nutt
|
c777f90b8a
|
Costmet updates, naming, debug output, README file
|
2013-12-01 07:39:20 -06:00 |
|
Gregory Nutt
|
5978e04411
|
ViewTool STM32F107: Add support for on-board LEDs and buttons
|
2013-11-30 14:15:15 -06:00 |
|
Gregory Nutt
|
22fb787c86
|
Basic board support for the ViewTool STM32F103/F107 board
|
2013-11-30 12:14:15 -06:00 |
|
Gregory Nutt
|
706292f417
|
More changes for a clean ez80 KITG build
|
2013-11-29 16:12:59 -06:00 |
|
Gregory Nutt
|
25f7e45708
|
Make naming consistent for USB host initialiation functions
|
2013-11-29 14:31:44 -06:00 |
|
Gregory Nutt
|
4c7cc446c1
|
LPC31 EHCI: Verified that driver works with keyboard (low-speed, interrupt endpoints)
|
2013-11-29 14:31:42 -06:00 |
|
Gregory Nutt
|
2d1408e3e1
|
examples/hidkbd now expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:40 -06:00 |
|
Gregory Nutt
|
5a29e41ed9
|
examples/hidkbd now expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:38 -06:00 |
|
Gregory Nutt
|
02d05de4b2
|
examples/hidkbd no expects an architecture-specific USB HOST initialization function
|
2013-11-29 14:31:34 -06:00 |
|
Gregory Nutt
|
78936f7260
|
Changes for ZDS-II ez80 build
|
2013-11-28 17:47:03 -06:00 |
|
Gregory Nutt
|
f171394ba9
|
STM32F429I-Discovery: Add support for external SST25 FLASH. From Ken Pettit
|
2013-11-28 08:21:15 -06:00 |
|
Gregory Nutt
|
afb0209207
|
LPC31 EHCI: Seems to work after re-ordering some initialization logic
|
2013-11-27 13:14:23 -06:00 |
|
Gregory Nutt
|
5fb0062d2d
|
SAMA5 NAND: A few bug fixes for integration. Still lots more to do
|
2013-11-27 11:04:40 -06:00 |
|
Gregory Nutt
|
ac275259bd
|
SAMA5 NAND: Fix some DMA related issues
|
2013-11-27 07:37:42 -06:00 |
|
Gregory Nutt
|
45a4eba015
|
SAMA5D3x-EK NAND: Integrate SAMA5 NAND support into SAMA5D3x-EK board support
|
2013-11-25 12:10:24 -06:00 |
|
Gregory Nutt
|
d2ce5423cd
|
Cosmetic changes
|
2013-11-22 13:36:07 -06:00 |
|
Gregory Nutt
|
eba19bef85
|
LPC3131 EHCI: More fixes
|
2013-11-21 16:39:49 -06:00 |
|
Gregory Nutt
|
c282733058
|
LPC-H3131: SDRAM comments updated
|
2013-11-21 14:47:37 -06:00 |
|
Gregory Nutt
|
37591022ca
|
LPC-H3131: SDRAM timing update. Still does not work
|
2013-11-21 14:46:49 -06:00 |
|
Gregory Nutt
|
68c964e3e2
|
LPC-H3131 SDRAM: Fix some build issues
|
2013-11-21 12:45:42 -06:00 |
|
Gregory Nutt
|
38042f641a
|
LPC-H3131: SDRAM support (untested)
|
2013-11-21 06:37:50 -06:00 |
|
Gregory Nutt
|
dace1ec4b0
|
Olimex LPC-H3131: Some restructuring of intialization logic
|
2013-11-20 17:01:34 -06:00 |
|
Gregory Nutt
|
22378d66c5
|
lpc31 ECHI. Early debug changes
|
2013-11-20 16:24:10 -06:00 |
|
Gregory Nutt
|
9e804749e9
|
Olimex LPC-H3131: Drop loops-per-second by a factor of 4. Why is the H3131 only 25% as fast as the EA3131 at the same clocking?
|
2013-11-19 15:54:23 -06:00 |
|
Gregory Nutt
|
c9c6d0c0d1
|
Olimex LPC_H3131: Add GPIO support for LEDs and for USB host power enable and overcurrent detection.
|
2013-11-19 15:52:10 -06:00 |
|
Gregory Nutt
|
9986d22e19
|
Updated README
|
2013-11-18 19:07:49 -06:00 |
|
Gregory Nutt
|
6cded05be3
|
Add .gitignore files; update a README
|
2013-11-18 15:38:04 -06:00 |
|
Gregory Nutt
|
a184224660
|
Add support for the Olimex LPC-H3131 board
|
2013-11-18 14:51:38 -06:00 |
|
Gregory Nutt
|
7ccbbe07cb
|
Further NAND development
|
2013-11-16 11:46:35 -06:00 |
|
Gregory Nutt
|
c7657c9c5e
|
EA3131: Framework for USB host support
|
2013-11-15 15:56:24 -06:00 |
|
Gregory Nutt
|
e53ba01b64
|
Add support for ONFI compatible NAND devices (NAND logic still incomplete)
|
2013-11-15 14:11:21 -06:00 |
|
Gregory Nutt
|
897572a552
|
Moved include/nuttx/mtd.h to include/nuttx/mtd/mtd.h
|
2013-11-15 11:22:23 -06:00 |
|
Gregory Nutt
|
121de26583
|
SAMA5 NAND: Basic support for access to NAND FLASH
|
2013-11-15 09:30:05 -06:00 |
|
Gregory Nutt
|
b3faf95a7c
|
LPC31: Configuration and build support for a forthcoming USB host driver; configs/ea3131/nsh converted to use kconfig-frontend tools
|
2013-11-14 15:33:43 -06:00 |
|
Gregory Nutt
|
bc58422444
|
STM32 CAN: Options for TSEG1 and TSEG2 quanta missing from Kconfig file
|
2013-11-14 08:29:36 -06:00 |
|
Gregory Nutt
|
7de422a42c
|
README update
|
2013-11-12 17:15:27 -06:00 |
|
Gregory Nutt
|
5e4d01f626
|
SAMA5D3x-EK updated README
|
2013-11-12 17:00:37 -06:00 |
|
Gregory Nutt
|
794b38d220
|
SAMA5D3x-EK Kconfig: There is no 'else'
|
2013-11-12 10:20:33 -06:00 |
|
Gregory Nutt
|
a29e6f93f8
|
Updated SAMA5D3x-EK README file
|
2013-11-11 16:17:13 -06:00 |
|
Gregory Nutt
|
f23b82f9b2
|
SAMA5D3x-EK: Add support for the apps/examples/i2schar test
|
2013-11-11 15:17:37 -06:00 |
|
Gregory Nutt
|
f7f5923d9d
|
Freedom KL25Z: Add PWM support. From Alan Carvalho de Assis
|
2013-11-10 10:39:03 -06:00 |
|
Gregory Nutt
|
4216e66fc7
|
STM32F429I-Discovery: Add support for the usbnsh and usbmsc configurations using the OTG HS peripheral in FS mode. From Ken Pettit.
|
2013-11-10 07:30:34 -06:00 |
|
Gregory Nutt
|
2a1de6af07
|
SAMA5D3x-EK README: Add description of WM8904 CODEC
|
2013-11-10 07:16:43 -06:00 |
|
Gregory Nutt
|
f32dc8426b
|
Updated Spark README from David Sidrane
|
2013-11-08 16:38:16 -06:00 |
|
Gregory Nutt
|
84876022a5
|
Spark: move CDC/ACM .inf Windows driver files into the spark/scripts directory
|
2013-11-08 16:25:44 -06:00 |
|
Gregory Nutt
|
4171db9da2
|
Add an apps/examples/usbserial configuration for the Spark. From David Sidrane
|
2013-11-07 18:31:08 -06:00 |
|
Gregory Nutt
|
78a239f79e
|
Add CDC/ACM serial driver for the Spark composite configuration
|
2013-11-07 17:39:13 -06:00 |
|
Gregory Nutt
|
55b592faf8
|
Add support for the STM32F429I-Discovery board from Ken Pettit
|
2013-11-07 16:55:45 -06:00 |
|
Gregory Nutt
|
e231270215
|
SAMA5 PWM: PWM driver is now functional
|
2013-11-07 09:17:46 -06:00 |
|
Gregory Nutt
|
3aa348035d
|
SAMA5D3x-EK: Add support board-specific PWM testing
|
2013-11-06 14:38:19 -06:00 |
|
Gregory Nutt
|
7394517bab
|
NSH library: Allow USB trace without a USB console
|
2013-11-06 07:09:00 -06:00 |
|
Gregory Nutt
|
21159573b4
|
Updated spark configuration from David Sidrane
|
2013-11-05 09:15:50 -06:00 |
|
Gregory Nutt
|
b2f4454ccf
|
Fix typo introduced (by me) in the last large set of changes from Ken Pettit
|
2013-11-04 10:49:36 -06:00 |
|
Gregory Nutt
|
120075577f
|
configs/mikroe-stm32f4/fulldemo updated by Ken Pettit
|
2013-11-04 09:29:27 -06:00 |
|
Gregory Nutt
|
14b4fa3c72
|
configs/sim/configdata: MTD configuration data driver unit test. From Ken Pettit
|
2013-11-04 09:17:31 -06:00 |
|
Gregory Nutt
|
cad56c49ca
|
SAMA5 CAN: File that I forgot to add in a previous commit
|
2013-11-04 08:57:27 -06:00 |
|
Gregory Nutt
|
93aae8c2c5
|
SAMA5 CAN: Add board-specific initialization logic
|
2013-11-03 10:03:52 -06:00 |
|
Gregory Nutt
|
a2b6d12271
|
Fix to SST25 driver to permit faster write modes. From David Sidrane
|
2013-11-02 08:27:13 -06:00 |
|
Gregory Nutt
|
f3313a0f51
|
Spark config updates from David Sidrane
|
2013-11-02 08:11:41 -06:00 |
|
Gregory Nutt
|
2a215127a0
|
Configs update for SST25 SPI from Davide Sidrane
|
2013-11-02 08:07:39 -06:00 |
|
Gregory Nutt
|
21cf9ccb6d
|
Another updated to the spark configuration from David Sidrane
|
2013-11-01 12:42:49 -06:00 |
|
Gregory Nutt
|
0d0c3e66fb
|
Updates to sparck configuration from David Sidrane
|
2013-11-01 11:40:19 -06:00 |
|
Gregory Nutt
|
dae191ec3a
|
Updated spark configuration from David Sidrane, including new USB MSC configuration
|
2013-11-01 11:28:23 -06:00 |
|
Gregory Nutt
|
b102d01046
|
The Mikroe STM32 F4 board now uses /dev/config for configuration data storage. From Ken Pettit
|
2013-11-01 07:50:35 -06:00 |
|
Gregory Nutt
|
d677006a1e
|
Missing file that I forgot to add in the last commit
|
2013-10-30 18:11:54 -06:00 |
|
Gregory Nutt
|
35dd7b9203
|
Updated Spark board configuration from David Sidrane
|
2013-10-30 14:38:16 -06:00 |
|
Gregory Nutt
|
8c5fc5fa88
|
Spark configuration updated by David Sidrane
|
2013-10-30 10:29:51 -06:00 |
|
Gregory Nutt
|
1d5b786fa2
|
Minor changes while pondering a camera interface
|
2013-10-29 16:57:06 -06:00 |
|
Gregory Nutt
|
3fd4629bd7
|
SAMA5 ADC: Seems functional in all modes including DMA
|
2013-10-28 10:08:12 -06:00 |
|
Gregory Nutt
|
61e63181d7
|
configs/spark: Spark NSH configuration updated from David Sidrane
|
2013-10-27 18:53:43 -06:00 |
|
Gregory Nutt
|
13ec431d75
|
SAMA5 README update
|
2013-10-27 11:09:53 -06:00 |
|
Gregory Nutt
|
376652f293
|
Updated Mikroe STM32F4 configuration from Ken Pettit
|
2013-10-27 08:06:39 -06:00 |
|
Gregory Nutt
|
4dcba6d538
|
configs/spark: Spark configuration update from David Sidrane
|
2013-10-26 17:41:23 -06:00 |
|
Gregory Nutt
|
ad3539209b
|
Updated Spark board configuration from David Sidrane
|
2013-10-25 15:51:38 -06:00 |
|
Gregory Nutt
|
1668aa408e
|
SAMA5 ADC+TC: Early debug fixes + lots of new debug instrumentation
|
2013-10-24 16:50:51 -06:00 |
|
Gregory Nutt
|
28d50790f2
|
SAMA5D3x-EK: Add support for app/examples/adc
|
2013-10-24 15:39:56 -06:00 |
|
Gregory Nutt
|
18e651b670
|
KL25: Update build for compatibility with recent CC3000 changes
|
2013-10-24 13:59:53 -06:00 |
|
Gregory Nutt
|
21c59c0aa7
|
Added support for the Olimex STM32 P207 board. From Martin Lederhilger
|
2013-10-24 08:48:04 -06:00 |
|
Gregory Nutt
|
d6dee94aa2
|
apps/examples/can: Fix an error in a debug statement. From Martin Lederhilger
|
2013-10-24 08:14:33 -06:00 |
|
Gregory Nutt
|
da5333663f
|
Spark configuration update from David Sidrane
|
2013-10-24 08:03:07 -06:00 |
|
Gregory Nutt
|
e5b093cd3a
|
Remove carriage returns from SAMA5 TC files just commited
|
2013-10-23 15:39:00 -06:00 |
|
Gregory Nutt
|
76764003a5
|
Add logic to enable DEBUG_NET if NET=n but WL_CC3000=y
|
2013-10-23 11:48:57 -06:00 |
|
Gregory Nutt
|
69e49938f0
|
SAMA5 CAN: Update readme on how to configure CAN
|
2013-10-23 11:32:12 -06:00 |
|
Gregory Nutt
|
212b5f504c
|
Changes to the Spark configuration from David Sidrane
|
2013-10-23 08:37:16 -06:00 |
|
Gregory Nutt
|
06c87638ae
|
SAMA5 demo configuration: TRNG and /dev/random are now enabled
|
2013-10-20 12:16:17 -06:00 |
|
Gregory Nutt
|
0ebdbfbc88
|
SAMA5 TRNG: Add a /dev/random driver based on the SAMA5D3 TRNG peripheral
|
2013-10-20 11:38:31 -06:00 |
|
Gregory Nutt
|
5316b1755f
|
SAMA5 norboot configuration updates
|
2013-10-20 08:46:52 -06:00 |
|
Gregory Nutt
|
b5a22632d7
|
SAMA5 norboot configuration updates
|
2013-10-20 08:44:07 -06:00 |
|
Gregory Nutt
|
cc4c4f4593
|
SAMA5 WDT: Miss watchdog fixes
|
2013-10-20 08:24:05 -06:00 |
|
Gregory Nutt
|
13ab1b586d
|
Updated README
|
2013-10-19 12:37:14 -06:00 |
|
Gregory Nutt
|
9e8bc003e5
|
Add instructions to enable RTC in the nsh/ configuration; RTC enabled by default in the demo configuration
|
2013-10-19 10:38:23 -06:00 |
|
Gregory Nutt
|
6fda497bc1
|
Updated Spark/cc3000 files from David Sidrane
|
2013-10-18 17:14:58 -06:00 |
|
Gregory Nutt
|
d72a99bc64
|
SAMA5 LCD: Move framebuffers to center of free memory region. That creates a guard band around the framebuffers that gives a little protection from any bad writes into the framebuffer
|
2013-10-18 10:11:20 -06:00 |
|
Gregory Nutt
|
0e53acfb24
|
Make sure that CONFIG_SDIO_PEFLIGHT=y is set in all STM32 configurations that have SDIO DMA enabled
|
2013-10-18 08:57:59 -06:00 |
|
Gregory Nutt
|
0e8617c1d2
|
Minor tweaks to debug output; started renaming some icons to include size in the name; SAMA5 NxWM config needs libm
|
2013-10-17 15:19:26 -06:00 |
|
Gregory Nutt
|
8ad32012ab
|
New touchscreen scaling algorithm for the case where measured X values vary with y position (and vice versa)
|
2013-10-17 12:07:14 -06:00 |
|
Gregory Nutt
|
58455b46ab
|
Spark configuration updates from David Sidrane
|
2013-10-16 08:20:57 -06:00 |
|
Gregory Nutt
|
e7428e9cbc
|
Spark configuration updates from David Sidrane
|
2013-10-16 07:55:04 -06:00 |
|
Gregory Nutt
|
6d3bb7f51c
|
SAMA5D3x-EK NxWM configuration: use 320x320 NuttX logo as the background
|
2013-10-15 16:11:33 -06:00 |
|
Gregory Nutt
|
96885a3afd
|
Use NxWidgets::CScaledBitmap to scale icons in the NxWM taskbar
|
2013-10-15 14:29:06 -06:00 |
|
Gregory Nutt
|
b8df3a7e91
|
NxWM::CCalibration: Add logic to collect and average samples, optionally discarding the most extreem values
|
2013-10-14 18:35:23 -06:00 |
|
Gregory Nutt
|
87d8d3a7d5
|
Misc changes to README files; Update SAMA5D3x-EK NxWM configuration to use Calibration instruction messages
|
2013-10-14 14:53:38 -06:00 |
|
Gregory Nutt
|
d19eb19af4
|
SAMA5D3x-EK: Add NxWM configuration for the SAMA5D3x-EK boards
|
2013-10-13 18:49:32 -06:00 |
|
Gregory Nutt
|
63269035a7
|
SAMA5D3x-EK: Enable simulated mouse and keyboard events in the NX configuration
|
2013-10-13 13:59:39 -06:00 |
|
Gregory Nutt
|
fa71c8211c
|
SAMA5 LCDC: Correct how framebuffer memory was being mapped; Remove options to get framebuffer memory in various. Because of the mapping and aligment requirements, those options really cannot be supported
|
2013-10-13 13:08:05 -06:00 |
|
Gregory Nutt
|
3cfe4c2113
|
SAMA5 LCDC: Move framebuffer to lower memory; I suspect some corruption by interference
|
2013-10-13 10:42:14 -06:00 |
|
Gregory Nutt
|
02f7c5d8d5
|
SAMA5 LCDC: Fixed backlight PWM divider. Backlight no longer flashes
|
2013-10-11 17:12:35 -06:00 |
|
Gregory Nutt
|
e9187d3199
|
SAMA5 LCDC: Wait when the LCDC is resynchronizing (SIF); Try start-up parameters from Barebox (this still don't work)
|
2013-10-10 18:44:08 -06:00 |
|
Gregory Nutt
|
de5ae1a584
|
SAMA5 LCDC: Default resolution if now RGB565; Add option to select a different output resolution than the sofware resolution (needs to the 24BPP for this LCD).
|
2013-10-10 18:41:42 -06:00 |
|
Gregory Nutt
|
b641545f93
|
SAMA5 LCDC: Move DMA descriptors out of internal SRAM and into SDRAM. I am not completely clear, but it looks like the LCDC cannot support DMA from internal SRAM
|
2013-10-10 12:02:41 -06:00 |
|
Gregory Nutt
|
98410588e8
|
Arduino Due: RXD0 pull-up works with both REV2 and REV3
|
2013-10-10 07:11:13 -06:00 |
|
Gregory Nutt
|
ff64ccb539
|
SAMA5 LCDC: Corrections from first debug sessions. Still a way to go
|
2013-10-09 13:21:27 -06:00 |
|
Gregory Nutt
|
3b6e63199a
|
Add option to enable Aduino Due specific logic, like pull-up on UART0 RXD. Suggested by gdi@embedders.org
|
2013-10-09 07:35:00 -06:00 |
|
Gregory Nutt
|
0b9b77067e
|
Cosmetic change; removal of spaces at the end of lines
|
2013-10-09 07:30:39 -06:00 |
|
Gregory Nutt
|
baf1353743
|
SAMA5: Add an examples/nx configuration for testing the LCD
|
2013-10-08 16:52:21 -06:00 |
|
Gregory Nutt
|
f8397f8238
|
SAMA5: LCDC driver incorporated into the build system.
|
2013-10-08 15:30:38 -06:00 |
|
Gregory Nutt
|
ed980b51f7
|
SAMA5: LCDC driver progress
|
2013-10-07 12:05:16 -06:00 |
|
Gregory Nutt
|
9d6bfb5238
|
SAMA5: ADC and touchscreen drivers now build without errors
|
2013-10-03 14:32:21 -06:00 |
|
Gregory Nutt
|
a4123ed6d5
|
SAMA5: Integrate touchscreen and ADC drivers into the build
|
2013-10-03 12:49:13 -06:00 |
|
Gregory Nutt
|
97a4ecb306
|
SAMA Touchscreen/ADC: More progress
|
2013-10-02 16:55:22 -06:00 |
|
Gregory Nutt
|
fee65851ca
|
Add framework for Spark Core board support. The initial commit is a clone of the Maple Mini and still needs Spark customizations
|
2013-10-02 08:24:46 -06:00 |
|
Gregory Nutt
|
e92ed407aa
|
SAMA5 ADC/Touchscreen: A little more logic
|
2013-10-01 14:40:34 -06:00 |
|
Gregory Nutt
|
647aff0ded
|
Changes to NSH and readline to permit NSH to work on a platform with no file system
|
2013-09-30 11:34:04 -06:00 |
|
Gregory Nutt
|
50123bd30f
|
Add freedom-kl25z/minnsh configuration: This is an experiment to see just how small we and get an NSH configuration. From Alan Carvalho de Assis.
|
2013-09-30 09:20:11 -06:00 |
|
Gregory Nutt
|
0a1a68b77a
|
KL25Z: Add low-level up_lowgetc function that can be used to provide an NSH console when the file system (and hence the serial driver) is disabled. From Alan Carvalho de Assis
|
2013-09-30 09:15:31 -06:00 |
|
Gregory Nutt
|
417f67c132
|
Clean up some naming: fd vs. fildes vs. filedes and filep vs filp
|
2013-09-28 16:50:07 -06:00 |
|
Gregory Nutt
|
1f88a2907c
|
The last checkin replaced some impossible error handling with DEBUGASSERT. Except that one of the case is actually possible in one cornercase and had to be restored
|
2013-09-28 15:37:16 -06:00 |
|
Gregory Nutt
|
41f0c86cad
|
Optimized sendfile() from Max Holtzberg
|
2013-09-28 14:47:49 -06:00 |
|
Gregory Nutt
|
cc0128183a
|
SAMA5: Update README.txt to show how to configure GMAC
|
2013-09-27 16:58:25 -06:00 |
|
Gregory Nutt
|
7b9b7cbdec
|
configs/compal_e88 converted to use the kconfig-frontends tools
|
2013-09-27 16:12:44 -06:00 |
|
Gregory Nutt
|
d6503f4dd2
|
Add support for the Motorola C139 phone
|
2013-09-27 15:11:31 -06:00 |
|
Gregory Nutt
|
fde6c30ac2
|
ZIT-ARM-1769: Led to LED control logic from Raashid Fatah
|
2013-09-26 07:15:52 -06:00 |
|
Gregory Nutt
|
b3ecd158ac
|
Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested
|
2013-09-25 18:50:14 -06:00 |
|
Gregory Nutt
|
fa027d30e0
|
Move apps/examples/cdcacm to apps/system/cdcacm
|
2013-09-25 17:23:03 -06:00 |
|
Gregory Nutt
|
0b450bc202
|
Move apps/examples/usbmsc to apps/system/usbmsc
|
2013-09-25 16:54:39 -06:00 |
|
Gregory Nutt
|
eee01427e2
|
Updated README.txt
|
2013-09-25 15:21:23 -06:00 |
|
Gregory Nutt
|
cf6ae816da
|
LED change requested by Rashid
|
2013-09-25 08:32:45 -06:00 |
|
Gregory Nutt
|
788d1623ae
|
Fix badly applied patch to ENCX24J600
|
2013-09-25 08:26:56 -06:00 |
|
Gregory Nutt
|
0b998887f4
|
SAMA5D3x-EK: Enable the interrupt stack in in all configurations
|
2013-09-24 13:46:14 -06:00 |
|
Gregory Nutt
|
9bb771b8b8
|
SAMA5 UDPHS: Minor clean-up of STALL logic
|
2013-09-23 18:10:41 -06:00 |
|
Gregory Nutt
|
8f57ee9e07
|
ZKIT-ARM-1769: LED1 is now user controllable. From Rashid Fatah
|
2013-09-23 07:47:56 -06:00 |
|
Gregory Nutt
|
cf5cf0da72
|
SAMA5D3x-EK AT25 Serial FLASH: Dropping SPI frequency to 10MHz gives more reliable behavior
|
2013-09-22 12:22:55 -06:00 |
|
Gregory Nutt
|
0ad20e4918
|
Fix minor typos in README file
|
2013-09-21 15:38:11 -06:00 |
|
Gregory Nutt
|
9b22dafd5f
|
SAMA5D3x-EK: Always use UPLL for USB clocking
|
2013-09-21 12:20:11 -06:00 |
|
Gregory Nutt
|
60bd791dec
|
SAMA5 + HID Keyboard. Fixes to initialize the HID keyboard class
|
2013-09-20 15:23:00 -06:00 |
|
Gregory Nutt
|
34804c8ee7
|
SAMA5 OHCI: Fix some problems with D-Cache coherency and physical addressing related to interrupt endpoints
|
2013-09-20 15:22:09 -06:00 |
|
Gregory Nutt
|
ad1d9d2a44
|
Several usability improvements the SAMA5D3x-EK configurations
|
2013-09-20 12:37:36 -06:00 |
|
Gregory Nutt
|
5d0131fc73
|
Names of some USB device definitions changed to avoid collisions
|
2013-09-20 10:00:30 -06:00 |
|
Gregory Nutt
|
dbf07d6d01
|
SAMA5 OHCI: When UPLL drives OHCI the logically correct divider of 10 does not work; But a divider of 5 does. Why?
|
2013-09-19 16:10:46 -06:00 |
|
Gregory Nutt
|
db9d3dfce6
|
Ran make oldconfig on the SAMA5 NSH configuration
|
2013-09-18 13:52:37 -06:00 |
|
Gregory Nutt
|
0c62e5797e
|
SAMA5: Add support for the FPU OS test
|
2013-09-18 10:35:03 -06:00 |
|
Gregory Nutt
|
26009bf8bb
|
A consequence of previous change: Configurations that select a PHY also need to set CONFIG_NETDEVICES or PHY configuration will be lost on the next reconfiguration
|
2013-09-17 17:13:20 -06:00 |
|
Gregory Nutt
|
5ee2ab3a72
|
Zkit-ARM-1868: MMC/SD is on SPI, not SSP0. From Rashid Fatah
|
2013-09-17 17:08:46 -06:00 |
|
Gregory Nutt
|
14ac82c11c
|
SAMA5 EMAC: Changes from early debug sessions. Still a way to go
|
2013-09-17 15:52:19 -06:00 |
|
Gregory Nutt
|
9557eb70db
|
Add prefex ETH0 to all PHY configurations to support multiple NICs
|
2013-09-17 10:44:23 -06:00 |
|
Gregory Nutt
|
9d59d5ef13
|
SAMA5 EMAC: Incremental progress. Still not code complete
|
2013-09-16 11:36:12 -06:00 |
|
Gregory Nutt
|
ed7c7a25e7
|
SAMA5 Ethernet: Add support for PHY interrupts
|
2013-09-15 12:24:42 -06:00 |
|
Gregory Nutt
|
50f482f902
|
STM32: Support for the LeafLabs Maple and Maple Mini boards. From Librae
|
2013-09-13 12:45:33 -06:00 |
|
Gregory Nutt
|
7e33cee02f
|
SAMA5 EMAC and GMAC: More additions to register definition files
|
2013-09-13 03:35:56 -06:00 |
|
Gregory Nutt
|
f2f40f35bd
|
SAMA5: Beginning of EMAC and GMAC register definition header files
|
2013-09-12 15:45:12 -06:00 |
|
Gregory Nutt
|
c839aa84ca
|
SAMA5D3x-EK README update
|
2013-09-12 14:17:56 -06:00 |
|
Gregory Nutt
|
4e0c905d61
|
SAMA5 TWI: Misc improvements during debug (still not getting interupts)
|
2013-09-12 12:25:31 -06:00 |
|
Gregory Nutt
|
48bdf1b5d2
|
SAMA5D3x-EK: Add support for (external) AT 24C512 EEPROM
|
2013-09-12 09:47:31 -06:00 |
|
Gregory Nutt
|
b5eed8c9cb
|
SAMA5: Barebones TWI driver implementation
|
2013-09-11 16:48:56 -06:00 |
|
Gregory Nutt
|
7391afb5c2
|
SAMA5D3x-EK demo configuration now supports HSMCI0 and HSMCI1
|
2013-09-11 09:50:36 -06:00 |
|
Gregory Nutt
|
990d3a65a4
|
SAMA5: Add tracing support to the OHCI driver
|
2013-09-10 16:01:44 -06:00 |
|
Gregory Nutt
|
349677aaf9
|
Fix a reference counting error in the USB host mass storage class
|
2013-09-10 11:38:40 -06:00 |
|
Gregory Nutt
|
3ba64b0cfe
|
USB monitor extended so that it can also be used with USB host trace data
|
2013-09-09 15:02:33 -06:00 |
|
Gregory Nutt
|
59f6aeefd2
|
SAMA5: Add support EHCI/OHCI to sama5d3x-ek/demo (does not work yet); Fix some EHCI/OHCI compilation issues when DEBUG is disabled
|
2013-09-07 11:43:06 -06:00 |
|
Gregory Nutt
|
9a9de5de81
|
Fix warnings in USB MSC when compiled for a high speed device; also fix USB MSC default VID/PID configuration
|
2013-09-07 10:12:02 -06:00 |
|
Gregory Nutt
|
0585cd5692
|
Extend USB trace logic. When we are configured to decode and stringify trace data, de-stringification support is not included for class driver trace output
|
2013-09-06 17:24:02 -06:00 |
|
Gregory Nutt
|
8912bcb1ea
|
SAMA5D3x-EK: Add support for USB MSC device on AT25 serial flash
|
2013-09-06 13:07:29 -06:00 |
|
Gregory Nutt
|
e30cb1d470
|
SAMA5D3x-EK: Add a new 'demo' configuration
|
2013-09-06 11:40:46 -06:00 |
|
Gregory Nutt
|
fb37248343
|
CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong.
|
2013-09-05 18:00:16 -06:00 |
|
Gregory Nutt
|
1fb40b9dd9
|
More renaming examples/usbstorage to examples/usbmsc
|
2013-09-05 08:10:36 -06:00 |
|
Gregory Nutt
|
a5612af642
|
Rename examples/usbstorage to examples/usbmsc. From CCTSAO
|
2013-09-05 08:07:03 -06:00 |
|
Gregory Nutt
|
ce6368793a
|
Some restructing of the CC3000 build
|
2013-09-04 16:40:57 -06:00 |
|
Gregory Nutt
|
29d4748b1b
|
Initial cut of a driver for the TI CC3000 network module with support on the Freescale KL25Z board from Alan Carvalho de Assis
|
2013-09-03 14:59:48 -06:00 |
|
Gregory Nutt
|
43a62c63d9
|
SAMA5 UDPHS: A little debugging progress. Not all transfers are working yet
|
2013-09-03 13:09:50 -06:00 |
|
Gregory Nutt
|
c162cca9e8
|
SAMA5 UDPHS: Some very early debug corrections. Not yet working.
|
2013-09-02 12:26:15 -06:00 |
|
Gregory Nutt
|
67a126a5dc
|
Misc USB device changes reated to SAMA5, trace support, and USB monitoring
|
2013-09-01 11:52:21 -06:00 |
|
Gregory Nutt
|
5c950889cf
|
SAMA5 UDPHS: Support USPHS clock configuration
|
2013-09-01 11:29:51 -06:00 |
|
Gregory Nutt
|
f4c1568c17
|
SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build
|
2013-08-31 17:37:51 -06:00 |
|
Gregory Nutt
|
147dc5206d
|
Fix typo in Freedom KL25Z function name. From Alan Carvalho de Assis
|
2013-08-31 13:22:25 -06:00 |
|
Gregory Nutt
|
75c9ba5fbb
|
Remove empty README.txt files
|
2013-08-31 13:17:04 -06:00 |
|
Gregory Nutt
|
e862d5d197
|
SAMA5 EHCI: Implemented (but did not test) interrupt endpoint logic
|
2013-08-28 13:07:35 -06:00 |
|
Gregory Nutt
|
bc46b447dc
|
Fix all occurrences of "the the" in documentation and comments
|
2013-08-27 09:40:19 -06:00 |
|
Gregory Nutt
|
18126a5fd4
|
SAMA4 EHCI: Correct some backward conditional compilation; fix some warnings
|
2013-08-26 17:03:52 -06:00 |
|
Gregory Nutt
|
b3df0c1037
|
SAMA5 EHCI: Data toggle and status phase fixes
|
2013-08-25 14:45:08 -06:00 |
|
Gregory Nutt
|
70be601ea2
|
Add ENCX24J600 Ethernet driver and support for the ENCX24J600 with the Olimex STM32 P107 board. From Max Holtberg
|
2013-08-25 11:21:54 -06:00 |
|
Gregory Nutt
|
0582148cfd
|
SAMA5D3x-EK: Fix some backward conditional compilation
|
2013-08-24 14:06:47 -06:00 |
|
Gregory Nutt
|
cd84d1bec4
|
SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt
|
2013-08-24 11:34:24 -06:00 |
|
Gregory Nutt
|
9a109ba4ba
|
SAMA5: Add support for sharing ports when both OHCI and EHCI are enabled
|
2013-08-23 10:58:30 -06:00 |
|
Gregory Nutt
|
b1864a995e
|
Move all SAMA5 EHCI interrupt handling to the worker thread
|
2013-08-21 11:07:42 -06:00 |
|
Gregory Nutt
|
320a2e2a0a
|
Beginning of support for SAMA5 EHCI. Not much there yet
|
2013-08-20 15:46:36 -06:00 |
|
Gregory Nutt
|
0524688c71
|
Add few more EHCI definitions
|
2013-08-18 13:01:13 -06:00 |
|
Gregory Nutt
|
44dd71de4e
|
Completes EHCI header file
|
2013-08-18 09:01:16 -06:00 |
|
Gregory Nutt
|
1fb80e0917
|
SAMA5 OHCI: Re-organize some endpoint list data structures.. Strange things happen when semaphores lie in DMA memory which is occasionally invalidated
|
2013-08-16 11:36:51 -06:00 |
|
Gregory Nutt
|
371639637f
|
SAMA5: Correct the PLL 48MHz divisor. It was off by a factor of two... no idea why
|
2013-08-14 19:38:48 -06:00 |
|
Gregory Nutt
|
0098c9ec5f
|
SAMA5: ports should not be reset state (seems to make no difference)
|
2013-08-14 17:33:31 -06:00 |
|
Gregory Nutt
|
fe73fe2e23
|
SAMA5: Alternatie clock configuration that yields a perfect 48MHz full speed USB clock and a CPU clock of 384MHz
|
2013-08-14 15:16:04 -06:00 |
|
Gregory Nutt
|
152a5e6da6
|
SAMA5: Fix out of range USB PLL divisor
|
2013-08-14 14:20:01 -06:00 |
|
Gregory Nutt
|
16ac25fd09
|
Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5
|
2013-08-13 17:43:19 -06:00 |
|
Gregory Nutt
|
1700d06d89
|
Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports.
|
2013-08-13 15:03:46 -06:00 |
|
Gregory Nutt
|
a384129490
|
Convert olimex-stm32-p107/nsh configuration to use kconfig-frontends tool. From Max Holtzberg
|
2013-08-12 15:00:28 -06:00 |
|
Gregory Nutt
|
e09bd50fdd
|
First of several changes needed to support multiple USB host root hubs
|
2013-08-12 14:44:06 -06:00 |
|
Gregory Nutt
|
0da218483d
|
SAMA5: Add logic to control VBUS power for OHCI
|
2013-08-12 11:59:10 -06:00 |
|
Gregory Nutt
|
e2d7ab9487
|
SAMA5: Add support for initialization of the USB host and mass storage class
|
2013-08-11 17:52:36 -06:00 |
|
Gregory Nutt
|
ed49812d2c
|
Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes
|
2013-08-11 17:11:32 -06:00 |
|
Gregory Nutt
|
dd3c682443
|
SAMA5: Some improvements to the HSCMI card removal/insertion logic
|
2013-08-11 11:13:11 -06:00 |
|
Gregory Nutt
|
da4cebf572
|
SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA
|
2013-08-10 18:01:23 -06:00 |
|
Gregory Nutt
|
968b2553cd
|
Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level
|
2013-08-10 09:06:53 -06:00 |
|
Gregory Nutt
|
628f50ba61
|
SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers
|
2013-08-09 13:12:16 -06:00 |
|
Gregory Nutt
|
4369c172df
|
Change setup logic to hand MTD minor numbers for AT24, HSMCI0, and HSMCI1
|
2013-08-07 11:31:31 -06:00 |
|
Gregory Nutt
|
ce9eb71495
|
SAMA5: A few early, easy bug fixes. The rest will all be difficult
|
2013-08-06 11:29:53 -06:00 |
|
Gregory Nutt
|
fa011d9aca
|
SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts
|
2013-08-06 10:20:17 -06:00 |
|
Gregory Nutt
|
369bf26b20
|
SAMA5: Add HSMCI memory card driver support
|
2013-08-05 16:21:24 -06:00 |
|
Gregory Nutt
|
8c88dcd0c7
|
SAMA5: SPI Driver + AT25 FLASH work; SAM3/4: Correct an error, SPI will not be correctly configured if CONFIG_SPI_OWNBUS=n
|
2013-08-05 10:29:43 -06:00 |
|
Gregory Nutt
|
cbe8c5ed56
|
SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH
|
2013-08-05 08:24:39 -06:00 |
|
Gregory Nutt
|
906506c61c
|
SAMA5D3x-EK: At support for the AT25 serial FLASH
|
2013-08-04 16:56:41 -06:00 |
|
Gregory Nutt
|
7e2c6c4aef
|
Fixes for compiler warnings from Lorenz Meier
|
2013-08-03 16:51:48 -06:00 |
|
Gregory Nutt
|
6422792f57
|
Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts
|
2013-08-03 08:22:37 -06:00 |
|
Gregory Nutt
|
3c404ea742
|
Various changes to get SAMA5 SDRAM working. Marginally functional, but there is more to be done
|
2013-08-02 18:30:27 -06:00 |
|
Gregory Nutt
|
3ee10f0f08
|
Correct some typos int he MPADDRCS register address definitions
|
2013-08-02 12:06:11 -06:00 |
|
Gregory Nutt
|
2feb83a2f8
|
SAMA5: More MMU-related changes to properly initialize SDRAM
|
2013-08-02 11:11:57 -06:00 |
|
Gregory Nutt
|
2ac9669a87
|
SAMA5: Add logic to initialize SAMA5D3x-EK on-board SDRAM
|
2013-08-01 16:58:55 -06:00 |
|
Gregory Nutt
|
4576676f8e
|
Correct errors noted in SAMA5 documentation
|
2013-08-01 07:10:34 -06:00 |
|
Gregory Nutt
|
0a32db5e05
|
SAMA5: Delay loop calibrated; Correct sense of the RED LED
|
2013-07-31 11:44:30 -06:00 |
|
Gregory Nutt
|
ffdd034c35
|
SAMA5: Add an NSH configuration of the SAMA5D3x-EK board
|
2013-07-31 10:46:13 -06:00 |
|
Gregory Nutt
|
7dfef5e22e
|
SAMA5: Modification of some CPSR-related inline functions
|
2013-07-31 09:11:24 -06:00 |
|
Gregory Nutt
|
bfa1a9545b
|
SAMA5: Change mapping of vector tables to work around that fact that I don't understand how the AXI MATRIX remap works
|
2013-07-30 16:19:52 -06:00 |
|
Gregory Nutt
|
8bfdf70766
|
ARMv7-A: Add cp15_disable_dcache(); SAMA5: nor_main.c no disables MMU and caches; Should not remap ISRAM to address 0x0 unless we booted into ISRAM
|
2013-07-30 13:20:33 -06:00 |
|
Gregory Nutt
|
b2da68028e
|
The last bit of a previous commit was still in the editor
|
2013-07-30 12:07:51 -06:00 |
|
Gregory Nutt
|
2c6b370c4a
|
Add ARMv7-A irqdisable() inline function
|
2013-07-30 11:37:09 -06:00 |
|
Gregory Nutt
|
413aba0bf5
|
SAMA5: More cache and mmu inline utility functions
|
2013-07-29 19:57:15 -06:00 |
|
Gregory Nutt
|
5351598323
|
Changes to ARMv7-A boot logic to handle the case where we execute out of NOR FLASH
|
2013-07-29 17:54:56 -06:00 |
|
Gregory Nutt
|
1728594259
|
SAMA5: Add a little NuttX debug program to help debugger programs in NOR flash
|
2013-07-29 13:57:32 -06:00 |
|
Gregory Nutt
|
f96c6793b9
|
Add SAMA5 HSMC register definitions and logic to reconfigure the NOR FLASH
|
2013-07-29 10:56:21 -06:00 |
|
Gregory Nutt
|
4ba648aaae
|
SAMA5: Add file structure to support board-specific initialization of NOR flash
|
2013-07-29 07:41:53 -06:00 |
|
Gregory Nutt
|
9a94a3707c
|
SAMA5: The ostest configuration have been converted to run out of NOR flash. There is more to be done, however
|
2013-07-28 15:07:35 -06:00 |
|
Gregory Nutt
|
f0e3011fc3
|
Removed unused ARMv7-A cache function
|
2013-07-27 14:03:02 -06:00 |
|
Gregory Nutt
|
efa21b82bc
|
SAMA5: Fix heap allocation bugs
|
2013-07-27 11:28:31 -06:00 |
|
Gregory Nutt
|
dc92037e67
|
Add a hello world configuration to help with the SAMA5 bringup
|
2013-07-26 15:28:01 -06:00 |
|
Gregory Nutt
|
70f0ffdfc5
|
Finally... renamed all CONFIG_DRAM_ settings to CONFIG_RAM_
|
2013-07-26 10:09:17 -06:00 |
|
Gregory Nutt
|
0fb58d2cf1
|
Fix some bad page table definitions of last commit
|
2013-07-25 18:11:25 -06:00 |
|
Gregory Nutt
|
49f9b7040e
|
Misc Cortex-A5 MMU-related fix -- still does not boot
|
2013-07-25 16:37:55 -06:00 |
|
Gregory Nutt
|
55df28dbcf
|
Fix an uninitialized register error that crept into the ARM9 start up code many years ago and was recently cloned into the Cortex-A5. Obviously no on has used NuttX with ARM9 for years
|
2013-07-24 20:12:04 -06:00 |
|
Gregory Nutt
|
e6beda428a
|
Fix SAMA5 vector linking issue
|
2013-07-24 12:51:42 -06:00 |
|
Gregory Nutt
|
77e1c27005
|
Update SAMA5D3x-EK board configuration to support on-board UART connections, LEDs, and push buttons
|
2013-07-24 12:27:12 -06:00 |
|
Gregory Nutt
|
04b3bb1826
|
Revamp the way external memory regions are configured; Add logic to add SAMA5 external memory regions to the heap
|
2013-07-24 10:08:32 -06:00 |
|
Gregory Nutt
|
3860fc17f0
|
Improve Cortex-A5 context switching so that a little less copying is done
|
2013-07-24 07:47:51 -06:00 |
|
Gregory Nutt
|
14df812735
|
SAMA5: Adapt clocking for different boot modes. New header files for AXI matrix, BSC, and SFR
|
2013-07-23 13:54:49 -06:00 |
|
Gregory Nutt
|
e67d610347
|
SAMA5 clock configuration should now agree with Atmel sample code; Added header file with macros to enable and disable peripheral clocking
|
2013-07-22 17:00:02 -06:00 |
|
Gregory Nutt
|
a9b0f304e6
|
Add SAMA5 clock logic. Cloned from SAM3U and not yet verified
|
2013-07-22 14:42:05 -06:00 |
|
Gregory Nutt
|
87f54f7d0b
|
Add system timer logic for the SAMA5
|
2013-07-21 15:49:17 -06:00 |
|
Gregory Nutt
|
86c0d9772f
|
Add some preliminary linker scripts in order to begin building the SAMA5 target
|
2013-07-21 13:50:22 -06:00 |
|
Gregory Nutt
|
543b5b7e03
|
A few more Cortex-A5 and SAMA5 files
|
2013-07-21 12:52:38 -06:00 |
|
Gregory Nutt
|
b26d5c7164
|
A few more SAMA5D3 files
|
2013-07-19 17:45:28 -06:00 |
|
Gregory Nutt
|
4a81d47c86
|
Basic framework to support the AT91SAMA5D3 family and the SAMA5D3x-EK board(s) in particular
|
2013-07-19 15:23:03 -06:00 |
|
Gregory Nutt
|
8f2ad7eec1
|
Some initial frame for Cortex-A5 support. No much yet
|
2013-07-18 15:20:47 -06:00 |
|
Gregory Nutt
|
a7ae91c716
|
NSH cmp command by Andrew Twidgell
|
2013-07-18 08:24:29 -06:00 |
|
Gregory Nutt
|
c6459a79e2
|
Fix problems with host build of the Zmodem tools
|
2013-07-16 11:23:35 -06:00 |
|
Gregory Nutt
|
b7f15de193
|
More Zmodem tweaks
|
2013-07-16 08:26:59 -06:00 |
|
Gregory Nutt
|
076e67df24
|
Zmodem utilities can now be built for Linux; Fix some configuration confusion
|
2013-07-15 17:50:17 -06:00 |
|
Gregory Nutt
|
97327d8723
|
Minor end-of-the-day Zmodem changes
|
2013-07-15 17:11:09 -06:00 |
|
Gregory Nutt
|
b9220fc118
|
Fix file write loop
|
2013-07-15 16:21:20 -06:00 |
|
Gregory Nutt
|
6153cfea56
|
Partial fixes for Zmodem RX buffering problems.
|
2013-07-15 12:33:35 -06:00 |
|
Gregory Nutt
|
aad86e1450
|
Fix an error in the ordering of fields in zm_transition_s structure; update documentation
|
2013-07-14 12:34:45 -06:00 |
|
Gregory Nutt
|
cee9f6d4b4
|
More Zmodem bugfixes and new files
|
2013-07-13 13:19:15 -06:00 |
|
Gregory Nutt
|
f272d83097
|
Additional support needed for Zmodem debug
|
2013-07-12 18:10:12 -06:00 |
|
Gregory Nutt
|
c960273afd
|
Build/test framework for the Zmodem sz and rz commands which are on their way
|
2013-07-12 16:01:37 -06:00 |
|
Gregory Nutt
|
6505474f03
|
SAM configurations: don't use 3 memory regions unless SMC is enabled
|
2013-07-12 14:50:22 -06:00 |
|
Gregory Nutt
|
a9e04b3f47
|
Fix some SPI bit bang timing. I still don't think it is working properly; I am going to need to borrow a logic analyzer
|
2013-07-05 11:45:17 -06:00 |
|
Gregory Nutt
|
37ed44a1ee
|
Fix type in the USB composite device driver
|
2013-07-04 07:47:32 -06:00 |
|
Gregory Nutt
|
bb69466c8b
|
Updates for the Sure PIC32 board
|
2013-07-03 11:39:54 -06:00 |
|
Gregory Nutt
|
ac36a07e24
|
Back out part of last change to the Arduino Due touchscreen driver
|
2013-07-03 09:07:01 -06:00 |
|
Gregory Nutt
|
94e2f4ceb4
|
Fix SAM34 interrupt handling for ports D-F; fix MISO logic in Arduino Due touchscreen driver
|
2013-07-03 08:12:45 -06:00 |
|
Gregory Nutt
|
f0ebaf8312
|
Several fixes to get a clean compile of the Arduino touch screen
|
2013-07-02 13:52:09 -06:00 |
|
Gregory Nutt
|
0ff5a0c791
|
Correct port direction for Arduino MISO signal
|
2013-07-02 12:37:20 -06:00 |
|
Gregory Nutt
|
d9279febb9
|
Flesh out a few missing pieces for the Arduino ITEAD TFT shield
|
2013-07-02 11:36:48 -06:00 |
|
Gregory Nutt
|
cfb156f286
|
Add support for touchscreen on ITEAD Arduino shield. Untested
|
2013-07-02 08:25:53 -06:00 |
|
Gregory Nutt
|
bdf96a93db
|
Revise how delays are calculated in SPI bit bang driver so that we may get a little better frequency resolution
|
2013-07-01 20:55:36 -06:00 |
|
Gregory Nutt
|
652c33a53a
|
clean up of SPI bit bang logic
|
2013-07-01 17:49:43 -06:00 |
|
Gregory Nutt
|
e1dab23711
|
Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield
|
2013-07-01 16:50:16 -06:00 |
|
Gregory Nutt
|
8b68ea2f94
|
Add a general bit-bang SPI upper-half driver
|
2013-07-01 12:23:26 -06:00 |
|
Gregory Nutt
|
09faaccc02
|
Created new directories to hold SPI-related files
|
2013-07-01 08:11:54 -06:00 |
|
Gregory Nutt
|
dc47d3de89
|
Update SAM3u-EK touchscreen status
|
2013-06-30 12:05:09 -06:00 |
|
Gregory Nutt
|
6af5cfef34
|
Minor SAM3U-EK NxWM build updates, documentation, configurations
|
2013-06-30 11:20:24 -06:00 |
|
Gregory Nutt
|
089bca3599
|
Changes to get a clean compile of configs/sam3u-ek/nxwm
|
2013-06-29 09:39:01 -06:00 |
|
Gregory Nutt
|
8ba8ad39f9
|
SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further
|
2013-06-28 17:07:58 -06:00 |
|
Gregory Nutt
|
940b82bf61
|
quick and not very accurate calibration of arduino due timing loops
|
2013-06-28 15:50:44 -06:00 |
|
Gregory Nutt
|
3505ca7556
|
Add an NSH configuration for the Arduino Due; Pluse several fixes related to the Due and to the SAM3X in general
|
2013-06-28 14:32:08 -06:00 |
|
Gregory Nutt
|
e34e1ee987
|
Arduino Due: Fixes to FLASH address, flash wait states, updated Comments. Now boots and runs a bit before crashing
|
2013-06-28 11:29:14 -06:00 |
|
Gregory Nutt
|
f20f23cf31
|
Add instructions to use BOSSA to load nuttx into Due
|
2013-06-28 08:54:09 -06:00 |
|
Gregory Nutt
|
9956392d00
|
With these changes the Arduino Due port builds without errors
|
2013-06-27 15:07:07 -06:00 |
|
Gregory Nutt
|
e0310e2cc8
|
Flesh out the Arduino Due board configuratino and integrate it with the build and configuration system
|
2013-06-27 14:24:27 -06:00 |
|
Gregory Nutt
|
293e46e435
|
Review and update of SAM3/4 header files and conditional logic for SAM3X/A support
|
2013-06-27 11:06:13 -06:00 |
|
Gregory Nutt
|
bc7ac20616
|
Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port
|
2013-06-26 18:46:44 -06:00 |
|
Gregory Nutt
|
18240b07b6
|
Add support for SAM3X and 3A chips, interrupts, and peripheral IDs
|
2013-06-26 12:28:32 -06:00 |
|
Gregory Nutt
|
450862a944
|
Add support fo SAM4S Xplained SRAM
|
2013-06-26 10:57:25 -06:00 |
|
Gregory Nutt
|
64dd806d89
|
Fix integration of RAM test into the build and configuration system
|
2013-06-26 10:54:12 -06:00 |
|
Gregory Nutt
|
3d1f29217e
|
Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
|
2013-06-25 09:13:30 -06:00 |
|
Gregory Nutt
|
3d975e0a08
|
Fix UG-2832HSWEG04 landscape. Add reverse landscape support to UG_2864AMBAG01 and UG-9964HSWAG01. Fixe NXHELLO default colors for 1-bit mono modes
|
2013-06-24 12:37:02 -06:00 |
|
Gregory Nutt
|
d971650440
|
Fix UG-2832HSWEG04 configuration values
|
2013-06-23 15:17:22 -06:00 |
|
Gregory Nutt
|
d11050e978
|
Add support for the UG-2843HHSWEG04 OLED and for the SAM4L Xplained Pro OLED module that uses that OLED.
|
2013-06-23 14:39:56 -06:00 |
|
Gregory Nutt
|
8959fffedc
|
SAM4L Xplained SLCD driver is complete
|
2013-06-23 09:05:20 -06:00 |
|
Gregory Nutt
|
b41c96e1f8
|
Beginning debug of SAM4L Xplained SLCD
|
2013-06-22 17:01:44 -06:00 |
|
Gregory Nutt
|
7b716cf8f5
|
The SAM4L Xplained Pro SLCD driver is code complete but untested
|
2013-06-22 10:39:25 -06:00 |
|
Gregory Nutt
|
5152ce9f79
|
Beginning of a driver for the SAM4L LED1 module
|
2013-06-21 17:42:09 -06:00 |
|
Gregory Nutt
|
add0a67995
|
Straighten out issues about who calls C++ initializers with CXXTEST or HELLOXX are built as NSH applications; Add an ofstream test to CXXTEST suggested by Michael; Update many defconfig fiels to that they set configurations to handle C++ constructors just as before these configuration changes
|
2013-06-21 09:32:57 -06:00 |
|
Gregory Nutt
|
59e1d1c6cd
|
More KL25Z SPI fixes
|
2013-06-20 19:58:45 -06:00 |
|
Gregory Nutt
|
76f9df2941
|
Fix backward wait condition in KL24Z SPI driver
|
2013-06-20 17:39:42 -06:00 |
|
Gregory Nutt
|
d5a0c75bbb
|
Add framework for managing SPI-related discretes on the Freedom KL25Z board.
|
2013-06-20 13:50:16 -06:00 |
|
Gregory Nutt
|
41fcc9504c
|
Change use of ferror() in uClibc++ so that is does not use more capability than is currently supported by the NuttX ferror()
|
2013-06-20 08:21:04 -06:00 |
|
Gregory Nutt
|
876fcca8f7
|
More Freedom KL25Z changed to and from Alan Carvalho de Assis
|
2013-06-19 20:50:27 -06:00 |
|
Gregory Nutt
|
f597172733
|
Add SPI register definitions for the Freescale KL25Z
|
2013-06-19 09:56:32 -06:00 |
|
Gregory Nutt
|
d4e550eea8
|
SAM3U-EK LCD: Correct LCD configuration
|
2013-06-18 14:53:10 -06:00 |
|
Gregory Nutt
|
69fc11bb71
|
Fix test of NULL pointer in the SAM3/4 SPI driver
|
2013-06-18 12:16:52 -06:00 |
|
Gregory Nutt
|
177a8c0e9b
|
Freescale KL25Z support from Alan Carvalho de Assis
|
2013-06-18 11:20:57 -06:00 |
|
Gregory Nutt
|
39dcedb0f1
|
SAM3/4 SPI phase control (CPHA) is inverted
|
2013-06-18 09:29:55 -06:00 |
|
Gregory Nutt
|
b9ad057972
|
MMC/SD driver needs to manage SPI mode and data width as well
|
2013-06-17 12:31:24 -06:00 |
|
Gregory Nutt
|
8db5d403ee
|
SAM3U-EK board now runs at 96MHz
|
2013-06-17 08:41:52 -06:00 |
|
Gregory Nutt
|
c9f1d1857c
|
SAM3U-EK: Correct polarity of the PENIRQ signal
|
2013-06-16 14:31:18 -06:00 |
|
Gregory Nutt
|
c7fd7a4e27
|
Re-architected SAM3/4 SPI interface; Change BUSY bit handling in the ADS7843E driver
|
2013-06-16 10:09:21 -06:00 |
|
Gregory Nutt
|
dd2983e26a
|
SAM MMCSD/SPI related changes
|
2013-06-15 17:00:52 -06:00 |
|
Gregory Nutt
|
0b6e12e853
|
Oops.. files that I forgot to add in the last commit
|
2013-06-15 10:56:42 -06:00 |
|
Gregory Nutt
|
44fe999aea
|
Add support for the SAM4L Xplained Pro I/O1 module
|
2013-06-15 10:56:08 -06:00 |
|
Gregory Nutt
|
aaf102b5c8
|
Prep for 6.28 release
|
2013-06-14 14:30:00 -06:00 |
|
Gregory Nutt
|
b1afe69591
|
Fixes for SAM4S and 4L due to recent changes to SAM3S; Updated README files
|
2013-06-14 08:54:24 -06:00 |
|
Gregory Nutt
|
8ed39d9f29
|
SAM3/4S GPIO interrupt changes
|
2013-06-13 18:53:14 -06:00 |
|
Gregory Nutt
|
9cf942bcb2
|
SAM3/4: Loop counter for PLL delay must be volatile or it may get optimized away
|
2013-06-13 16:18:25 -06:00 |
|
Gregory Nutt
|
e26381f0c0
|
SAM3/4: Some minor design improvements to the SAM3/4 serial driver
|
2013-06-13 15:16:52 -06:00 |
|
Gregory Nutt
|
3a351b60e1
|
Fix error in AT91SAM SPI driver introduced in recent comment. Varioius improvements to README files and debug output
|
2013-06-13 13:38:31 -06:00 |
|