Gregory Nutt
c1e14b0a6b
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 11:57:10 -06:00
Gregory Nutt
6e9aa0a1d7
ARMv7-A/M: Cosmetic changes
2015-12-14 11:56:39 -06:00
Gregory Nutt
b9feaf13b0
Update ARMv7-R system control register definitions from TRM
2015-12-14 11:54:58 -06:00
Gregory Nutt
cbc2f226c0
Merged in paulpatience/nuttx-arch/stm32_pinmap (pull request #38 )
...
STM32: Fix typos in pinmaps
2015-12-14 08:59:47 -06:00
Gregory Nutt
b7024fd202
Merged in paulpatience/nuttx-arch/stm32f30xxx_pinmap (pull request #37 )
...
STM32: Fix typos in STM32F30xxx pinmap
2015-12-14 08:58:34 -06:00
Gregory Nutt
67604e661f
Merge remote-tracking branch 'origin/master' into armv7r
2015-12-14 08:43:29 -06:00
Gregory Nutt
edecfc2dac
ARMv7-A: Cosmetic changes
2015-12-14 08:42:39 -06:00
Paul A. Patience
89da1f27dd
STM32: Fix typos in pinmaps
2015-12-14 09:41:49 -05:00
Gregory Nutt
5585f44b7e
Add initial support for ARMv7-R architecture. Initial commit is largely a clone of ARMv7-A and needs further review
2015-12-14 08:40:38 -06:00
Paul A. Patience
7589e940b6
STM32: Fix typos in STM32F30xxx pinmap
2015-12-14 09:36:28 -05:00
Gregory Nutt
cd8d37f46b
Eliminate a warning
2015-12-12 11:37:25 -06:00
Gregory Nutt
412c7c83a1
Forgot to add a file in the last commit
2015-12-12 09:37:01 -06:00
Gregory Nutt
daea1e614b
All architectures need to build ELF support if either CONFIG_ELF or CONFIG_MODULE are selected. Cortex-M7 also must support module cache corherence
2015-12-12 09:35:05 -06:00
Gregory Nutt
ead6656a35
SAMV7 USBHS device: Beef up test for data sent in DMA complete interrupt handler
2015-12-11 08:28:49 -06:00
Gregory Nutt
cb5c221ce7
Update a few comments
2015-12-10 06:32:27 -06:00
Gregory Nutt
a0594ec60e
SAMV7 USBHS device: Last change fixed certain problems and introduced some new ones. Here is an untested fix to address all known problems
2015-12-09 14:19:14 -06:00
Gregory Nutt
c26a624a9f
SAMA5: Backport some USB device ZLP logic from the SAMV7
2015-12-08 17:36:46 -06:00
Gregory Nutt
9135afa8c1
SAMV7 USBHS device: End of DMA is too soon to process ZLP. Wait for TXINI
2015-12-08 13:21:43 -06:00
Gregory Nutt
cd7c22bbd4
SAMV7: Trivial correcto to last USBHS device change when using huge request buffers
2015-12-08 11:10:16 -06:00
Gregory Nutt
19520b5c2c
SAMV7 USBHS device: Fix check if zero lenght packet is needed
2015-12-08 10:11:44 -06:00
Lok Tep
1481537f8c
config B option, reverted
2015-12-08 09:27:23 +01:00
Lok Tep
6c872c3162
ssp in pin buffer fix
2015-12-07 23:13:14 +01:00
Lok Tep
8ddb2a6a2a
ssp buffer check fix
2015-12-07 23:12:57 +01:00
Lok Tep
264fbc1ecc
CONFIG_I2C_RESET dummy function
2015-12-07 23:12:40 +01:00
Gregory Nutt
927b1dcc1f
Initialize the telnet factory as part of the common architecture intialization
2015-12-07 11:40:29 -06:00
Gregory Nutt
8df99623aa
SAMV7: For to add RSWDT driver before committing
2015-12-06 16:41:10 -06:00
Gregory Nutt
6a9876f960
SAMV7: Add an untested RSWDT driver
2015-12-06 09:56:45 -06:00
Gregory Nutt
8f55ec5c69
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
2015-12-06 09:29:51 -06:00
Gregory Nutt
347bb86045
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
2015-12-06 08:53:31 -06:00
Gregory Nutt
52601d9da8
SAMV7: Add support for PCK6 as a timer/counter clock source
2015-12-04 10:49:20 -06:00
Lok Tep
82c865e2b0
init global interrupt in timer mode
2015-12-04 10:23:29 +01:00
Gregory Nutt
9d769f6056
SAMV7: Extend programmable clock support for queries about the PCK configuration
2015-12-03 14:11:39 -06:00
Gregory Nutt
8c4302f75d
Bring programmable clock logic from SAMA5 to SAMV7
2015-12-03 10:22:11 -06:00
Gregory Nutt
1399e00166
SAMV7: Fix some issues with lost timer/counter interrupts
2015-12-02 18:09:23 -06:00
Gregory Nutt
2300273a07
SAMV7 TC: Some trivial improvements
2015-12-02 15:53:51 -06:00
Gregory Nutt
9a54702d99
SAMV7: Revise timer driver. SAMA5 has one pid/interrupt per timer/counter; SAMV7 has a pid/interrupt per channel
2015-12-02 14:09:34 -06:00
Gregory Nutt
192772b7ee
SAMV7: Add support for CONFIG_SCHED_TICKLESS_LIMIT_MAX_SLEEP
2015-12-02 09:21:34 -06:00
Gregory Nutt
3ce3dbc6ed
SAMV7: Ported tickless logic from the SAMA5/SAM4CM to the SAMV7
2015-12-02 08:26:33 -06:00
Gregory Nutt
02c57c22f8
SAMA5: Misc clean from review while porting some logic to the SAMV7
2015-12-02 08:25:23 -06:00
Gregory Nutt
bda05b312e
SAMV7: Port the SAMA5 timer/counter driver to the SAMV7
2015-12-02 07:18:25 -06:00
Gregory Nutt
975ea3e677
SAMA5: Fix a typo in timer/counter setup
2015-12-02 07:17:17 -06:00
Lok Tep
f02d3808a3
compile spifi with vpath
2015-12-02 12:51:45 +01:00
Gregory Nutt
6734c91a05
SAMV7 USB: Add some warnings to avoid certain bad configuration selections
2015-12-02 05:30:10 -06:00
Gregory Nutt
754aace61b
STM32: CCM procfs more typos
2015-12-01 16:28:14 -06:00
Gregory Nutt
bc74aa322b
STM32: Fix a couple of typos in STM32 CCM procfs
2015-12-01 16:20:51 -06:00
Lok Tep
fd74d0b625
spifi
2015-12-01 23:09:31 +01:00
Gregory Nutt
1f82dda9d8
Clean up some naming
2015-12-01 15:04:12 -06:00
Gregory Nutt
548ba1640f
STM32: CCM procfs is no longer a part of the 'base' procfs entries and can now only be supported via run time registration with CONFIG_FS_PROCFS_REGISTER=y
2015-12-01 14:55:05 -06:00
Lok Tep
9a527ad3ed
adc: timer mode
2015-12-01 14:53:52 +01:00
Gregory Nutt
7037f13c2d
Trivial cosmetic change from review
2015-11-30 18:01:26 -06:00
Wail Khemir
fd8db7ad38
Change prescaler dynamically to support bigger periods on 16 bits timers
2015-11-30 18:52:05 -05:00
Gregory Nutt
5367c5993c
SAMV7: Add some conditional logic to handle the case where the board has no 32.768KHz crystal installed
2015-11-30 15:21:25 -06:00
Gregory Nutt
4d2299896e
SAMV7: Add support to network device statistics to the Ethernet driver
2015-11-27 12:30:15 -06:00
Gregory Nutt
8ce454a584
Remove some warnings; eliminate unused variables
2015-11-26 12:46:53 -06:00
Gregory Nutt
e5e631e57f
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
2015-11-26 12:07:18 -06:00
Gregory Nutt
2afd4595e4
Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES
2015-11-26 06:59:35 -06:00
Gregory Nutt
4aa3dcb51a
__KERNEL__ should be defined when compiler architecture specific logic
2015-11-25 18:05:36 -06:00
Gregory Nutt
14d7ede265
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
2015-11-25 17:10:41 -06:00
Lok Tep
dd4ef7b2e9
rename to offset
2015-11-25 21:07:14 +01:00
Lok Tep
70ab09976a
setup out with data
...
ep 5-6
fixex
2015-11-25 21:07:00 +01:00
Gregory Nutt
b1e17d8892
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
2015-11-25 12:51:07 -06:00
Gregory Nutt
30834721df
Trivial changes for compliance with coding standard
2015-11-20 17:53:03 -06:00
Wail Khemir
702368fce4
Small bug fix for stm32 lower half timer driver
2015-11-20 18:16:39 -05:00
Gregory Nutt
25a2e17347
Rename up_rtcinitialize to up_rtc_initialize so that it looks like other RTC interfaces
2015-11-20 08:27:04 -06:00
Gregory Nutt
25e54726a3
STM32: Fix a build error detected by tools/testbuil.sh: The STM32L does not define UID address
2015-11-18 14:33:27 -06:00
Gregory Nutt
a6d6c430d9
Changes to last merge from review for compliance to coding standards
2015-11-17 21:10:17 -06:00
Marwan Ragab
4999c14085
Added implementation to get 96-bit stm32 unique id
2015-11-17 21:34:41 -05:00
Gregory Nutt
a8ab72f97a
Fix some stylistic issues found by tools/nxstyle
2015-11-17 17:31:38 -06:00
Gregory Nutt
3c84aa3b5f
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
2015-11-17 16:53:21 -06:00
Wail Khemir
9451b09d3a
Added a lower-half timer driver for stm32 which is compatible with the upper-half driver located at /drivers/timers/timer.c
2015-11-17 16:57:02 -05:00
Lok Tep
5d689fedcf
spifi regs
2015-11-17 18:02:08 +01:00
Gregory Nutt
88ebcc895b
Fix some spacing problems found by tools/nxstyle.c
2015-11-15 10:47:42 -06:00
Gregory Nutt
bd384d93eb
SAMV7 MCAN: Cosmetic change
2015-11-15 08:38:27 -06:00
Lok Tep
0d1ba69ba8
Merge remote-tracking branch 'origin/master'
2015-11-15 12:55:21 +01:00
Lok Tep
386939c8af
roght ram bank
2015-11-15 12:52:57 +01:00
Gregory Nutt
82b6c8aed7
Add SAME70 to arm/arch/src/samv7/Kconfig
2015-11-14 13:35:24 -06:00
Gregory Nutt
39362feee0
arch/arm/src/samv7: Add pin configuratinos for SAME70. Not all verified. I assume that the SAME70 pin mapping is identical to the SAMV71 minus MediaLB pins
2015-11-14 12:14:27 -06:00
Gregory Nutt
58615a4e69
arch/arm/src/samv7: Add SAME70 memory map
2015-11-14 12:01:28 -06:00
Gregory Nutt
38a3d24706
arch/arm/src/samv7: Add support for SAME70 peripheral clocks
2015-11-14 11:41:53 -06:00
Gregory Nutt
0add2b8910
arch/arm/include/samv7: Add support for the SAME70 family
2015-11-14 11:36:21 -06:00
Gregory Nutt
ba57b5bdc0
SAMV7 FLASH: Fix a cache error, fix an address comparison
2015-11-13 11:32:06 -06:00
Gregory Nutt
a1e9a07c7a
SAMV7 progmem: Debug fixes from intial testing
2015-11-13 09:18:26 -06:00
Gregory Nutt
4ecf9b5bec
SAMV7 FLASH driver now at least compiles
2015-11-12 12:26:53 -06:00
Gregory Nutt
1593cd7149
SAMV7 flash logic is complete, uncompiled, and untested
2015-11-12 10:46:59 -06:00
Gregory Nutt
78153004ee
SAMV7: Don't call can_txdone with the device locked. This can lead to deadlocks on subsequent actions from the upper half can driver
2015-11-12 07:58:09 -06:00
Frank Benkert
54cff3c5ae
SAMV7 MCAN: Remove forcing of transfer complete interrupt
2015-11-12 07:35:01 -06:00
Gregory Nutt
b05fb671ff
Trivial simplification to logic of last commit
2015-11-11 15:17:36 -06:00
Gregory Nutt
003e022ce9
SAMV7 QSPI: Check if data to be transferred is unaligned; If unaligned, don't use DMA
2015-11-11 14:29:28 -06:00
Paul A. Patience
52454cf79b
Fix typo
2015-11-11 13:06:15 -05:00
Gregory Nutt
3964b4ac57
SAMV7: Add framework for on-chip FLASH access
2015-11-11 10:07:41 -06:00
Gregory Nutt
11e89f5a7b
Cosmetic changes from code review
2015-11-11 07:41:51 -06:00
Gregory Nutt
518b4b14b2
Merged in petekol/arch (pull request #31 )
...
forgotten changes
2015-11-11 07:38:38 -06:00
Gregory Nutt
50b96b3f50
Review of previous commit for coding style. Tickless RIT logic still does not follow naming conventions or file format rules
2015-11-11 07:36:41 -06:00
Lok Tep
485d317401
forgotten changes
2015-11-11 14:22:22 +01:00
Lok Tep
3e33d18cac
Merge remote-tracking branch 'origin/master'
2015-11-11 13:48:53 +01:00
Lok Tep
67c5d07e83
usb/ssp initialization corrected
2015-11-11 13:47:21 +01:00
Lok Tep
f4d06f512f
Merged nuttx/arch into master
2015-11-11 13:40:09 +01:00
Gregory Nutt
45549cb2e2
Change some debug output to verbose
2015-11-10 12:15:22 -06:00
Gregory Nutt
d95da886f3
Cosmetic changes to comments
2015-11-10 11:31:00 -06:00
Lok Tep
5eff3a202b
Merge remote-tracking branch 'origin/master'
2015-11-09 23:47:33 +01:00
Lok Tep
b654a6f467
alarm
2015-11-09 21:01:32 +01:00
Gregory Nutt
f080b43b80
SAMV7 QSPI: Improved debug output
2015-11-09 13:32:58 -06:00
Lok Tep
3b4c71ef8d
more revert
2015-11-09 14:51:00 +01:00
Lok Tep
a8416d2a26
revert
2015-11-09 14:41:08 +01:00
Lok Tep
1f8c0fdcdb
timer base name difference
2015-11-09 14:34:59 +01:00
Lok Tep
7d386866af
Merged nuttx/arch into master
2015-11-09 14:24:41 +01:00
Gregory Nutt
612ebdeabd
Kconfig: Set default number of MPU regions to 16 for Cortex-M7
2015-11-08 06:59:35 -06:00
Gregory Nutt
352d2a1d02
SAMV7 XDMAC: Don't sample interrupt status registers in debug mode. This can cause loss of interrupts
2015-11-07 11:25:20 -06:00
Gregory Nutt
dd69967934
SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized
2015-11-07 09:35:23 -06:00
Gregory Nutt
2e99311fb4
SAMV7 QSPI: DMA transfer width should be 32- not 16-bits
2015-11-07 09:34:40 -06:00
Gregory Nutt
7b3c0ac7bc
ARMv7-M: Cosmetic fixes to some file headers
2015-11-06 13:37:37 -06:00
Gregory Nutt
b4b0dde792
SAMV7 QSPI: Back out some kludges that are no longer necessary
2015-11-06 13:02:45 -06:00
Gregory Nutt
17c8cbceaf
SAMV7 QSPI: Rounding up buffer length for memcpy style transfer is un-necessary
2015-11-06 12:59:40 -06:00
Gregory Nutt
553ba1a682
SAMV7 QSPI: When QSPI is enabled, make the QSPI memory strongly ordered
2015-11-06 12:10:15 -06:00
Gregory Nutt
771095e25f
ARMv7-M: Add MPU support for strongly couple memory regions
2015-11-06 11:50:57 -06:00
Gregory Nutt
1c79e77811
ARMv7-M: Minor naming change to improve readability
2015-11-06 11:24:52 -06:00
Gregory Nutt
4371b756df
SAMV7: Add MPU and protected build support
2015-11-06 11:12:28 -06:00
Gregory Nutt
dff502d99b
SAMV7 QSPI: Costmetic changes
2015-11-05 15:03:53 -06:00
Gregory Nutt
e866cdd6f1
Fix missed closing comment in last commit
2015-11-05 10:43:49 -06:00
Gregory Nutt
68ae17a8a7
SAMV7 QSPI: Various kludges added during debug of QSPI. I am not if any of these are really correct
2015-11-05 10:32:13 -06:00
Gregory Nutt
f49e862db5
Merged in paulpatience/nuttx-arch/stm32_adc (pull request #29 )
...
STM32 ADC: Add support for STM32F30xxx
2015-11-05 09:28:34 -06:00
Paul A. Patience
7d793bb99b
STM32 ADC: Add support for STM32F30xxx
2015-11-05 10:13:58 -05:00
Frank Benkert
9cbbfe7e59
SAMV7 MCAN: Fix receipt of RTR requests. From Frank Benkert
2015-11-04 08:03:27 -06:00
Gregory Nutt
1299160d1d
SAMV71-XULT: Add call to can_txready() to MCAN driver. This is part of a fix to a CAN hang problem
2015-11-03 10:47:37 -06:00
Lok Tep
24f1155d76
compile fixes
2015-11-02 23:34:32 +01:00
Gregory Nutt
c90876ff9c
SAMV7: Add configuration support (only) for use of USART as SPI
2015-11-02 13:58:19 -06:00
Lok Tep
30cea64430
fixes
2015-11-02 17:41:03 +01:00
Gregory Nutt
f6d7da24a7
SAM4CM should advertise that it supports Tickless operation in Kconfig
2015-11-02 06:39:24 -06:00
Gregory Nutt
96cee3709a
Merged in paulpatience/nuttx-arch/stm32_pwm (pull request #28 )
2015-11-01 16:51:32 -06:00
Lok Tep
08224b8606
after debug
2015-11-01 23:11:37 +01:00
Paul A. Patience
4c2c989838
STM32 PWM: Add support for multiple output channels
2015-11-01 17:11:35 -05:00
Gregory Nutt
79df561669
Rename board_led_off to board_autoled_off
2015-11-01 09:09:36 -06:00
Gregory Nutt
b28e32e3d3
Rename board_led_on to board_autoled_on
2015-11-01 09:07:06 -06:00
Gregory Nutt
9db4b4ca7e
Rename board_led_initialize to board_autoled_initiaize
2015-11-01 09:01:59 -06:00
pnb
d1b4d55343
pwm duty can by zero
2015-11-01 14:45:12 +01:00
Gregory Nutt
d6d834be5b
Merged in pnb990/nuttx-kernel-arch/upstream_master (pull request #25 )
...
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 09:07:28 -06:00
pnb
0090cfe6d4
Change name of HAVE_TIMx_PWM_OUTPUT into HAVE_TIMx_GPIOCONFIG
2015-10-31 16:00:24 +01:00
pnb
668c56b1a6
avoid warning unsused function when GPIO_TIMxCHxOUT declared in board and CONFIG_STM32_TIMx not enable but an other CONFIG_STM32_TIMx is enabled
2015-10-31 15:42:00 +01:00
v01d
79fad2843a
lpc4337: WIP
2015-10-30 20:15:18 -03:00
Lok Tep
3a4b0e12a1
tickless
2015-10-30 17:37:40 +01:00
Gregory Nutt
22ea50464f
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_qencoder (pull request #23 )
...
Enhance STM32 QEncoder driver with configurable input filters
2015-10-22 18:28:22 +08:00
Gregory Nutt
e3d44ace60
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429_pinmap (pull request #22 )
...
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
2015-10-22 18:26:53 +08:00
Gregory Nutt
04705d14df
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f373_exti (pull request #21 )
...
Add EXTI definitions for STM32F373
2015-10-22 18:21:45 +08:00
Gregory Nutt
2b078150e8
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32f429n (pull request #20 )
...
Add support for STM32F429N (TFBGA) chip
2015-10-22 18:19:52 +08:00
Gregory Nutt
c87c50df14
Merged in marten_svanfeldt/nuttx-arch-public/for_upstream/stm32_PLLSAI (pull request #19 )
...
Fix setup of PLLSAI in STM32F4xx.
2015-10-22 18:17:21 +08:00
Lok Tep
b91fbed6a6
address 7->8
2015-10-21 17:35:52 +02:00
Marten Svanfeldt
3299a31b27
Enhance STM32 QEncoder driver with configurable input filters
...
Current driver applies a fixed filter of f_sample=f_dts/4, N=6. This can
potentially be insufficient in noisy environments, or too slow for really
fast encoder sources, so let the user set it from the Kconfig file
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 11:06:01 +08:00
Marten Svanfeldt
fdb484f24e
Add missing pin definitions on STM32F429, specifically pins available on STM32F429N chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:56:36 +08:00
Marten Svanfeldt
d1c7e5b5fb
Fix setup of PLLSAI in STM32F4xx.
...
To correctly setup the PLLSAI register it is required to first mask out
the old PLL divisor and multiplier factors before setting new ones
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:33:39 +08:00
Marten Svanfeldt
4d879a33ee
Add support for STM32F429N (TFBGA) chip
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:30:57 +08:00
Marten Svanfeldt
54b333dcd3
Add EXTI definitions for STM32F373
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2015-10-21 10:22:41 +08:00
Frank Benkert
4ac10f53d7
Reconfigure System I/O when using USART1
2015-10-20 05:58:34 +08:00
Frank Benkert
78669f20f2
SAMV7 MCAN: ix switched assertion check for TSEG1 and TSEG2 in CANIOC_SET_BITTIMING
2015-10-18 08:14:10 +08:00
Paul A. Patience
08175bef58
STM32 PWM: Add ifdef for STM32F30XX
2015-10-09 17:20:42 -04:00
Gregory Nutt
a326b79b25
Merged in paulpatience/nuttx-arch (pull request #17 )
...
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 14:13:02 -06:00
Paul A. Patience
253e112b4a
STM32: Fix some incorrect configurations in Kconfig file
2015-10-09 13:47:22 -04:00
Max Kriegler
a20a61caef
STM32 F4: Correct pin mapping for TIM12 Channel 2
2015-10-09 10:32:46 -06:00
Gregory Nutt
d90f597a05
More spacing/alignment issues
2015-10-08 19:31:58 -06:00
Gregory Nutt
ef5f3dcff4
SAM3/4 RTC: Fix a bungled change from a recent commit
2015-10-08 19:21:35 -06:00
Lok Tep
5983019a45
merge from nuttx
2015-10-08 22:57:34 +02:00
Gregory Nutt
beb060d422
Yet more spacing issues
2015-10-07 20:24:19 -06:00
Gregory Nutt
a92842906f
STM32: Fix a search-and-replace error in previous commit
2015-10-07 19:58:05 -06:00
Gregory Nutt
20d87b38de
Tiva: Fix some cosmetic spacing issues
2015-10-07 15:57:49 -06:00
Gregory Nutt
4f2119b3f4
STR7: Correct some spacing issues
2015-10-07 14:22:01 -06:00
Gregory Nutt
7dbfae87ec
STM32 F7: Correct some spacing issues
2015-10-07 13:58:11 -06:00
Gregory Nutt
53f6fd6e66
STM32: Correct some spacing issues
2015-10-07 13:45:15 -06:00
Gregory Nutt
b6638315a4
Correct some spacing issues
2015-10-07 11:39:06 -06:00
Gregory Nutt
90b7cdcdaf
LPC11: Make some spacing comply better with coding standard
2015-10-06 19:23:32 -06:00
Gregory Nutt
d0d62668e7
Make some spacing comply better with coding standard
2015-10-06 18:32:16 -06:00
Gregory Nutt
fc3ed64864
Make some spacing comply better with coding standard
2015-10-06 17:28:32 -06:00
Gregory Nutt
281c6cc704
Make some spacing comply better with coding standard
2015-10-06 16:24:03 -06:00
Gregory Nutt
0ca999e119
Make some spacing comply better with coding standard
2015-10-06 16:23:32 -06:00
Lederhilger Martin
a9c8458458
STM32 PWM: Add logic to handle writes to 32-bit registers properly
2015-10-06 07:29:37 -06:00
Gregory Nutt
2ab66a015b
Cosmetic fixes to C coding style
2015-10-05 17:28:26 -06:00
Gregory Nutt
3fdd914203
Costmetic fixes to C coding style
2015-10-05 17:13:53 -06:00
Gregory Nutt
7a63e976ad
Remove TABs
2015-10-04 16:00:42 -06:00
Gregory Nutt
aaa697ec83
Remove dangling whitespace
2015-10-04 15:27:17 -06:00
Gregory Nutt
6fc6d17760
Fix some spacing problems
2015-10-04 14:59:08 -06:00
Gregory Nutt
4435c1bfb7
Standardize the width of all comment boxes in C header files
2015-10-03 07:33:06 -06:00
Gregory Nutt
9caf33e13b
Standardize the width of all comment boxes in C header files
2015-10-03 07:28:30 -06:00
Gregory Nutt
7ced84c5f0
Standardize the width of all comment boxes in C files
2015-10-03 07:25:03 -06:00
Gregory Nutt
cae0c9a2e3
Standardize the width of all comment boxes in header files
2015-10-02 17:47:23 -06:00
Gregory Nutt
36726b1bc4
Standardize the width of all comment boxes in header files
2015-10-02 17:42:29 -06:00
Gregory Nutt
16ecf905c0
Standardize nameing of the pre-processor definitiongs group header
2015-10-02 14:13:57 -06:00
admin
df5c815267
return 0 if OK
2015-10-02 12:14:09 +02:00
Gregory Nutt
ddf936c913
Various fixes for compilation issues found by tools/testbuild.sh
2015-10-01 11:09:39 -06:00
Gregory Nutt
3a07b09b9a
LPC43xx: Tweaks to pkolesnikov's LPC4370 changes to get a clean compilation
2015-10-01 10:00:25 -06:00
Gregory Nutt
166d307add
STM32: Fix conditional compilation of TIM SYSLOG initialization
2015-10-01 08:39:21 -06:00
Gregory Nutt
3acc09c056
LPC43xx: Remove unused .c file picked up in a recent merge
2015-10-01 07:18:07 -06:00
admin
9dcff018bc
strange hang reg read
2015-09-30 22:05:53 +02:00
Gregory Nutt
26347891ac
Apply same fix for ARMv7-M to other architectures
2015-09-30 11:21:04 -06:00
Gregory Nutt
08baf2fcc3
ARMv7-M: Fix logic that determines if there is a pending signal action before scheduling the next signal action. Both the test and the scheduling action need to be atomic
2015-09-30 11:00:33 -06:00
petekol
0eb1afcdef
usb reset right
2015-09-30 17:13:32 +02:00
Lederhilger Martin
7d72d1defc
STM32 ADC: Fix some cut'n'paste typos in ADC header file
2015-09-30 07:21:50 -06:00
Gregory Nutt
dec9742df4
SAMV7 Cut'n'paste Errors; CONFIG_SAMV7_XDMAC, not CONFIG_SAMV7_DMAC0/1
2015-09-30 07:02:10 -06:00
Lok Tep
2334f7cded
Merged nuttx/arch into master
2015-09-30 09:11:44 +02:00
Gregory Nutt
7fa4e4daab
SAMA5: Fix some SAMA5D3/4 bugs introduced with the SAMA5D2 changes
2015-09-29 16:10:10 -06:00
Gregory Nutt
be3adb678e
Change missed in last commit
2015-09-29 13:01:52 -06:00
Gregory Nutt
c88e9538d4
SAMA5Dx: Fix a header file naming collision
2015-09-29 12:49:24 -06:00
Lok Tep
bf9fdfa447
Merged nuttx/arch into master
2015-09-29 17:26:13 +02:00
petekol
585fdf70d8
CONFIG_ARCH_CHIP_LPC4370FET100
2015-09-29 17:23:17 +02:00
Stefan Kolb
51fb4d3252
SAMV7: SPI Slave fixes
2015-09-29 09:13:36 -06:00
Gregory Nutt
2a6c71e850
Costmetic changes from last merge to better conform to the coding standard
2015-09-29 09:06:16 -06:00
pkolesnikov
e6ab9cc339
init hw, draft
2015-09-29 15:53:20 +02:00
Gregory Nutt
cd6b51847b
SAMV71: Fix SPI compilation errors when SPI DMA is enabled
2015-09-29 07:31:21 -06:00
Gregory Nutt
473a3cf2a6
STM32: Trivial chnages from review of merge
2015-09-23 15:00:47 -06:00
Pierre-noel Bouteville
53fbd6b4ec
Merged nuttx/arch into master
2015-09-23 22:52:37 +02:00
pnb
f19c5e883d
add swo for stm32F4xxx
2015-09-23 22:51:22 +02:00
Gregory Nutt
cbdafb96d5
Remove unused function setipsr. Cortex-M IPSR register is not writable
2015-09-23 08:38:32 -06:00
Gregory Nutt
a1cbb7d8fb
Correct bad cut-and-paste in STM32 F7 stm32_uart.h. Noted by Vlad Chiorean
2015-09-22 09:02:06 -06:00
Gregory Nutt
139a31b875
stm32f74xx75xx_irq.h: STM32_IRQ_SAI2 is not defined but STM32_IRQ_SAI1 is defined twice. Noted by Vlad Chiorean
2015-09-22 07:45:59 -06:00
Gregory Nutt
7a2428819f
Minor style: # if pre-processor command should be in columnn 1
2015-09-18 12:47:24 -06:00
Gregory Nutt
39859a9645
All ARMV7-M: Force 8-byte stack alignment when calling from assembly to C to interrupt handling
2015-09-15 07:37:09 -06:00
Gregory Nutt
f7ca98c5ae
Fix error in almost all ARMv7-M interrupt stack handling
2015-09-14 07:07:13 -06:00
Gregory Nutt
f5d015d8a2
Clean up some kruft left in the SAMA5D2 PIO driver
2015-09-13 07:25:45 -06:00
Gregory Nutt
a27e673967
SAMA5D2: Finish implementtion of the PIO driver
2015-09-12 11:36:06 -06:00
Gregory Nutt
ac986987de
SAMA5D2: Add PIO driver. Still a work in progress
2015-09-12 09:58:18 -06:00
Gregory Nutt
7c62fcbe96
Rename sam_pio.c to sama5d53x4x_pio.c
2015-09-12 09:14:34 -06:00
Gregory Nutt
114f353224
SAMA5D2: Update matrix header file for the SAMA5D2
2015-09-12 09:02:42 -06:00
Gregory Nutt
94bdeda28e
SAMA5D2: Add PIO register definition header file
2015-09-12 08:24:48 -06:00
Gregory Nutt
b8c1f0bfeb
SAMA5: Rename chip/sam_pio.h to chip/sama5d3s4x_pio.h
2015-09-12 06:49:37 -06:00
Gregory Nutt
1f745e534b
SAMA5D2: Make sure that USART mode is selected for each Flexcom used as a serial device
2015-09-11 18:42:49 -06:00
Gregory Nutt
36eba6ef99
Fix some errors in comments
2015-09-11 18:03:40 -06:00
Gregory Nutt
cc0f1d1f04
SAMA5D: Ooops. Committed wrong version of RXLP header file
2015-09-11 18:01:38 -06:00
Gregory Nutt
7c4428b67e
SAMA5D2: Add RXLP register definition header file
2015-09-11 16:11:00 -06:00
Gregory Nutt
972ae84d95
SAMA5D2: Add logic to enable Flexcom clocking and to configure Flexcom pins
2015-09-11 14:54:30 -06:00
Gregory Nutt
b19c3d7cbe
SAMA5D2: Add Flexcom UART serial driver
2015-09-11 14:30:19 -06:00
Gregory Nutt
9385a98588
SAMA5D: Move common configuration logic from sam_lowputc.c and sam_serial.c to new sam_config.h. Make room in the architecture for forthcoming Flexcom USARTs
2015-09-11 12:00:30 -06:00
Gregory Nutt
a39b2351f0
SAMA5D2: Add Flexcom register definition header files
2015-09-11 10:40:12 -06:00
Gregory Nutt
f51541dfd6
SAMA5Dx UART: SAMAD4 also has BRSRCCK bit in the MR register
2015-09-11 08:27:18 -06:00
Paul A. Patience
260778feb1
Fix typo
2015-09-10 21:07:03 -04:00
Gregory Nutt
cf7ea3bc3e
Updates for SAMA5D2: It has no USARTS
2015-09-10 17:15:52 -06:00
Gregory Nutt
2cdbc17a63
SAMA5: Fix support for varying number of PIO ports
2015-09-10 13:46:57 -06:00
Gregory Nutt
c1b83cfbc8
SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2
2015-09-10 13:07:04 -06:00
Gregory Nutt
7ad8c32adf
Trivial spacing change
2015-09-10 12:11:10 -06:00
Ilya Averyanov
0fea56cd8b
LPC43xx: Add ehci driver.
2015-09-10 07:23:03 -06:00
Gregory Nutt
87aa1cb83b
SAMA5D2: Update PMC definitions; has UART2-4, but not USART0-4
2015-09-09 12:11:45 -06:00
Gregory Nutt
c391ada5e7
SAMA5D2: Update boot logic, AXIMX, SFR, and WDT register definition files for SAMA5D2
2015-09-09 10:00:29 -06:00
Ilya Averyanov
76ab22debf
LPC43xx: Fix IRQ Ethernet name
2015-09-09 07:22:02 -06:00
Gregory Nutt
5f54db8c17
Separate memory mapping tables for SAMA5D2, 3, and 4
2015-09-08 16:40:13 -06:00
Gregory Nutt
6e900bc88a
Eliminate warning
2015-09-08 13:26:51 -06:00
Gregory Nutt
36f1d84374
Remove some nonfunctional logic that also generates warnings
2015-09-08 13:02:33 -06:00
Gregory Nutt
0f8a416b20
More fixes for warning removal typos
2015-09-08 12:15:29 -06:00
Gregory Nutt
35866ede44
Eliminate warnings
2015-09-08 12:02:35 -06:00
Gregory Nutt
e7c149e545
Yet another rething of the SAMA5 memory mapping definitions
2015-09-08 11:50:30 -06:00
Gregory Nutt
e6aba39805
SAMA5: Correct some memory map logic
2015-09-08 11:35:11 -06:00
Gregory Nutt
2138e16199
Eliminate warnings
2015-09-08 11:08:44 -06:00
Gregory Nutt
2913aac866
Eliminate warnings
2015-09-08 10:20:41 -06:00
Gregory Nutt
e354853776
Elminiate some warnings
2015-09-08 09:18:59 -06:00
Gregory Nutt
d8c83218fe
Eliminate warnings
2015-09-08 08:27:34 -06:00
Gregory Nutt
7065f78b92
Eliminate a warning
2015-09-08 08:18:01 -06:00
Gregory Nutt
cfd41bdb30
STM32: Eliminate some warnings
2015-09-07 16:25:54 -06:00
Ilya Averyanov
560613622d
EHCI: We not need disable and enable async scheduler when
2015-09-07 13:44:56 -06:00
Ilya Averyanov
8cc83fa6dc
EHCI: Fix qh_ioccheck to move bp to next QH
2015-09-07 13:42:39 -06:00
Ilya Averyanov
6799bba3c1
EHCI: Rename asynch_setup to ioc_async_setup
2015-09-07 13:36:52 -06:00
Gregory Nutt
f3af146d44
SAMV7 QSPI: Back out part of last change; byte access are necessary. Correct write to the IAR register
2015-09-06 11:24:43 -06:00
Gregory Nutt
26eada3446
In all up_initialize() functions, automatically initialize TUN driver is so configureded
2015-09-06 09:35:29 -06:00
Gregory Nutt
b30e6a696e
SAMV71 QSPI: Add methods to allocate properly aligned memory.
2015-09-06 09:34:51 -06:00
Gregory Nutt
da3c05a898
Minor changes from review of merge
2015-09-06 07:10:21 -06:00
pnb
55dcbb4ca2
efm32 addons missing file
2015-09-06 13:10:41 +02:00
Gregory Nutt
9d5f04cd45
Remove some crap from the SAMA5D2 memory map header file
2015-09-05 12:43:34 -06:00
Gregory Nutt
6488fe469d
SAMA5D Kconfig: SAMA5D2 has P310 L2 cache
2015-09-05 12:15:50 -06:00
Gregory Nutt
975d912b40
Cosmetic: Move # of pre-processior command to column 1
2015-09-05 09:07:37 -06:00
Gregory Nutt
2ed09233d3
Changes to conform to coding standard.
2015-09-05 07:50:02 -06:00
Gregory Nutt
60d444cd69
Changes to conform to coding standard. Also, I assume references to STM32 should be EFM32?
2015-09-05 07:33:50 -06:00
Gregory Nutt
e714cd748c
Changes to conform to coding standard. Also, I assume references to STM32 should be EFM32?
2015-09-05 07:31:16 -06:00
pnb
1314f60caf
start of adc for efm32
2015-09-05 10:51:33 +02:00
Pierre-noel Bouteville
85b1638171
Merged nuttx/arch into master
2015-09-05 10:42:12 +02:00
pnb
c327cce0b8
add bitband support
2015-09-05 10:40:34 +02:00
pnb
c83d533d90
add flash read/write support
2015-09-05 10:37:53 +02:00
pnb
3c35458ac2
fix some I2C problem
2015-09-05 10:22:08 +02:00
pnb
ea596e45d3
add efm32_gpioirqclear
2015-09-05 10:20:24 +02:00
pnb
ed8531a53b
GPIO fix bug GPIO_DRIVE_... definition
2015-09-05 10:17:05 +02:00
pnb
9564f878a9
set Gpio drive only if not standard
2015-09-05 10:15:42 +02:00
pnb
fa65bef573
commetic
2015-09-05 10:11:06 +02:00
Gregory Nutt
544ed7cdbd
Purely cosmetic changes from code review
2015-09-04 16:36:43 -06:00
Gregory Nutt
804570f831
Merged in david_s5/arch/upstream_stm32_flash (pull request #11 )
...
Added suport for overriding the STM32 flash size. To allow the use of STM32F2 and STM32F4 devices with F, G, I flash designations
2015-09-04 16:25:03 -06:00
David Sidrane
9c13fa3f67
Added suport for overriding the STM32 flash size. To allow the use of STM32F2 and STM32F4 devices with F, G, I flash designations
2015-09-04 10:26:09 -10:00
Gregory Nutt
831272cd35
SAMA5D2: Add memory map file
2015-09-02 13:04:01 -06:00
Gregory Nutt
aff3dbda88
Remove one more unused reference to PCLKSEL
2015-09-02 09:16:04 -06:00
Gregory Nutt
cace0003f2
LPC43: Removed references to non-existent PCOMP and PCLKSEL registers in comments
2015-09-02 09:07:38 -06:00
Ilya Averyanov
f2e1fb7ea2
LPC43xx: Fix build with FPU enabled
2015-09-02 09:03:10 -06:00
Ilya Averyanov
a3bc46f629
LPC43xx: Add Ethernet support. From Ilya Averyanov
2015-09-02 09:01:41 -06:00
Ilya Averyanov
fdfaf9aa09
lpc43xx: Spi make work
2015-09-02 08:31:08 -06:00
Ilya Averyanov
f2b5f05124
STM32 Ethernet: stm32_ifdown() prototyped twice
2015-09-02 08:23:45 -06:00
Gregory Nutt
5a9f1fa3ab
Extension memory map inclusion for SAMA5D2
2015-09-02 08:23:44 -06:00
Gregory Nutt
075b66d4bb
Eliminate a warning
2015-09-01 13:35:38 -06:00
Gregory Nutt
8c9f7e5ab6
Add peripheral clock macros for the SAMA5D2
2015-09-01 13:08:48 -06:00
Gregory Nutt
f6d8a03b55
Merged in paulpatience/nuttx-arch (pull request #10 )
...
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 12:31:05 -06:00
Paul A. Patience
a0dc724a5d
Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.
2015-09-01 13:47:06 -04:00
Ilya Averyanov
98788063f1
Fix warning in Kconfig file introduced with first SAMA5D2 commit. From Ilya Averyanov.
2015-09-01 11:23:08 -06:00
Gregory Nutt
ed3d6fc7a0
SAMV7 QSPI: Delays need to be in units of nsec, not usec. Default delays should be 0 nsec
2015-09-01 11:16:09 -06:00
Ilya Averyanov
8c52786395
LPC43xx: Fix missing #define in eeprom. From Ilya Averyanov
2015-09-01 08:08:09 -06:00
Ilya Averyanov
675878b360
PC43xx: Fix NVIC_SYSH_PRIORITY_STEP define
2015-09-01 08:06:34 -06:00
Gregory Nutt
c33efa0a60
SAMA5D2: Add chip definitions, PIDs, and IRQ definitions
2015-08-31 15:19:01 -06:00
Gregory Nutt
9ba349f2b8
SAMV71 QSPI: Fix frequency calculation. Need to use ceil() type logic so that requested frequency is not exceeded
2015-08-31 10:18:17 -06:00
Gregory Nutt
4f87a71e6d
SAMV7 QSPI: Use of CPHA in mode settings was inverted
2015-08-31 10:05:41 -06:00
Gregory Nutt
4b738ba7cc
SAMV7 QSPI: Fix some compiler problems when SPI debug is enabled
2015-08-31 08:57:30 -06:00
Gregory Nutt
70f1a49fbe
arch/arm/src/up_iternal.h and several ARM Make.defs files: In the original implementation, NOT defined(CONFIG_ARMV7M_CMNVECTOR) was a sufficient test to determine if lazy floating point register saving was being used. But recents changes added common lazy register as well so now that test must be (NOT defined(CONFIG_ARMV7M_CMNVECTOR) || defined(CONFIG_ARMV7M_LAZYFPU)).
2015-08-31 08:40:02 -06:00
Gregory Nutt
b6515bbd4d
SAMV71 QSPI: Changes resulting removing of clocking
2015-08-29 18:53:27 -06:00
Gregory Nutt
b94eef2f19
SAMV71 QSPI: Driver is code complete
2015-08-29 15:57:20 -06:00
Gregory Nutt
3877cb09d9
Trivial renaming
2015-08-29 10:04:36 -06:00
Gregory Nutt
b887d39d2e
SAMV7 QSPI: Add DMA transfer support
2015-08-29 10:02:59 -06:00
Gregory Nutt
0b1bd46e24
SAMV71 QSPI: Add support for dual and quad data transfers and dummy read cycles
2015-08-28 11:58:19 -06:00
Gregory Nutt
3e0affba86
SAMV71 QSPI: Add support for non-DMA memory transfers
2015-08-28 10:13:46 -06:00
Gregory Nutt
8aefb9d139
SAMV71 QSPI: Redesign some functions to better matched new interface definition
2015-08-27 14:15:23 -06:00
Gregory Nutt
71bbe5b48d
Merge remote-tracking branch 'origin/master' into st25fl1
2015-08-27 12:08:04 -06:00
Gregory Nutt
926f3aa9af
Update some comments
2015-08-27 08:19:26 -06:00
Gregory Nutt
45a6f79eeb
SAMV71 QSPI: Flesh out most of the initialization logic
2015-08-26 14:15:40 -06:00
Gregory Nutt
768aba20ad
SAMV71 QSPI: Use new QSPI interface. Can't use SPI interface as planned; the hardware architectue is too different
2015-08-25 15:23:59 -06:00
Gregory Nutt
01cfe8c315
Networking: Move where the local loopback device is initialized from board_app_intiialize() to up_intiialize() so that it will happen automatically
2015-08-24 14:25:49 -06:00
David Sidrane
98ce2b2912
Fixed Mask and made configuration macros consistant
2015-08-24 08:56:24 -10:00
David Sidrane
b95c642a88
Added Kconfig Enable Support for SAI and I2S PLL
2015-08-24 08:55:45 -10:00
Gregory Nutt
bddc4dbd6a
LPC17: Fix RAM vector table alignment for the LPC17 family. The ARMv7-M TRM only requires 128-byte alignment for vector tables; the LPC17, however, requires 256 byte alignment
2015-08-23 17:17:14 -06:00
Gregory Nutt
065f2d6057
SAMV7 USBHS DCD: Add logic to detect high speed mode; use DEBUGASSERT to check input parameters
2015-08-22 08:58:38 -06:00
David Sidrane
6559c8994a
Remove the word NOT - that was used to test the fix.
2015-08-21 18:51:28 -06:00
David Sidrane
390c777a2a
Removed the word NOT - that was used to test the fix.
2015-08-21 18:40:20 -06:00
Pavel Pisa
2fafe1c817
arch/arm/src/lpc17: Actually implement options to use external SDRAM and or SRAM for the heap. From Pavel Pisa
2015-08-21 18:28:59 -06:00
Gregory Nutt
4c0d36740d
Some of the last review chnages were still in the editor
2015-08-21 18:25:10 -06:00
Gregory Nutt
9a32e907df
Trivial, cosmetic changes from review of merge
2015-08-21 18:22:57 -06:00
Gregory Nutt
4e347080e6
Update comments in Kconfig file
2015-08-21 18:15:09 -06:00
Gregory Nutt
16c5be9767
Merged in david_s5/arch/upstream_446 (pull request #7 )
...
Upstream_446
2015-08-21 18:11:05 -06:00
David Sidrane
9d64050d68
Added Changes to support for the new USB OTG controller for F446 register map
2015-08-21 13:57:08 -10:00
David Sidrane
7c96342c63
Break the stm32_otg.h into an stm32fxxxxx and stm32f44xx (should work on F7) versions
2015-08-21 13:55:06 -10:00
David Sidrane
5d1ff3f7e1
Use read modify write on PLL and CFG registers
2015-08-21 13:22:09 -10:00
David Sidrane
1c746edceb
Added PLL P constants
2015-08-21 13:20:16 -10:00
Gregory Nutt
972f67ce42
SAMV7 QSPI: Add framework for a QSPI driver. Initial commit is just the SPI driver with some name changes
2015-08-21 14:22:47 -06:00
Gregory Nutt
f6c6723d88
SAMV7 USBHS Device: After aligning DMA buffers and disabling write-back data cache, the DCD driver is fully functional using the CDC/ACM device
2015-08-21 12:30:29 -06:00
Gregory Nutt
da6c5aabdf
All ARMV7-M IRQ setup: Always set the NVIC vector table address. This is needed in cases where the code is running with a bootload and when the code is running from RAM. It is also needed by the logic of up_ramvec_initialize() which gets the vector base address from the NVIC. Suggested by Pavel Pisa
2015-08-21 08:42:24 -06:00
Gregory Nutt
0b3b104b74
Remove unnecessary step in previous commit
2015-08-20 16:21:45 -06:00
Pavel Pisa
387f76d455
This fix allows to run NuttX from SRAM or to place it after bootloader when run from Flash. From Pavel Pisa
2015-08-20 07:46:18 -06:00
Gregory Nutt
5196a4183c
SAMV7 USBHS device: Fix how we send data on control endpoints; fix how we select USB address
2015-08-19 11:36:38 -06:00
Gregory Nutt
0db7ac92d9
Minor coding style fixes in last commit; remove some unneeded debug output
2015-08-19 07:54:46 -06:00
SaeHie Park
75626fb071
STM32: Fix eth mem leak in recvframe
2015-08-19 15:40:04 +09:00
Gregory Nutt
cfd4f943da
SAMV7 MCAN: When bitrate is changed, the MCAN has to be reset and there are lots of issues related to getting back to a healthy state if there is multithreaded access to the MCAN device. This commit handles a few of those issues, but there are more
2015-08-18 11:56:07 -06:00
Gregory Nutt
4b96605f93
SAMV7 MAN: Add support for bit timing IOCTL commands
2015-08-18 11:20:22 -06:00
Gregory Nutt
ff84e67e59
SAMV7 MCAN: Add logic to report CAN errors
2015-08-18 08:48:13 -06:00
Gregory Nutt
b7d6720a23
All CAN drivers: Set the new error indication to zero in the CAN message report
2015-08-18 07:24:12 -06:00
Gregory Nutt
c01d3298e5
Merged in paulpatience/nuttx-arch (pull request #5 )
...
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, STM32F303RD, and STM32F303RE devices.
2015-08-17 12:55:32 -06:00
Paul A. Patience
c800841632
Added definitions for STM32F303K6, STM32F303K8, STM32F303C6,
...
STM32F303C8, STM32F303RD, and STM32F303RE devices.
2015-08-17 14:00:49 -04:00
Gregory Nutt
531456d20c
Fix deadlock when closing the MCAN device driver
2015-08-17 11:49:20 -06:00
Gregory Nutt
4f122d5290
SAMV71 MCAN: Default clock source should be MCK, not MAIN
2015-08-17 11:03:15 -06:00
Gregory Nutt
ff38abf580
SAMV7 MCAN: Should support standard CAN IDs in extended ID mode
2015-08-17 10:52:58 -06:00
Gregory Nutt
ba6c0b3fa3
Fix more common typos
2015-08-16 11:06:29 -06:00
Gregory Nutt
e29220183a
Fix some common typos
2015-08-16 10:59:10 -06:00
Gregory Nutt
9e5e91c204
SAMV7 USBHS device: Fix backward test of TXINIT. Driver now appears to be functional
2015-08-16 08:55:44 -06:00
Gregory Nutt
b503bf6ca1
SAMV7 USB device: Fix base address of USBHS RAM; remove a bad assertion; fix clearing of endpoint interrupts
2015-08-15 13:00:32 -06:00
Gregory Nutt
9d7301f474
SAMV7 USBHS device: Need to enable endpoint before configuring it; Check for USB suspended backward
2015-08-15 10:41:15 -06:00
Gregory Nutt
651317ee49
SAML21: Various SERCOM fixes
2015-08-14 18:11:02 -06:00
Gregory Nutt
348060f5d2
SAMV7: Add QSPI Register Definition Header File
2015-08-14 18:11:01 -06:00
Gregory Nutt
150f79a198
Backout commit e03b47b6e28ca98a6cc8497ad822309de5153eb3
2015-08-14 10:24:56 -06:00
Gregory Nutt
a44a208ff6
SAMV71 MCAN: Change Kconfig so that zero is no longer the default value for the size of RXFIFO0, RXFIFO1, and TXFIFIQ. In fact, zero is not an illegal value
2015-08-13 08:13:49 -06:00
Gregory Nutt
bef5eb0bc9
Fix a typo in a preprocessor warning
2015-08-12 15:32:46 -06:00
Gregory Nutt
b9d4ead73f
SAMV7 MCAN: Correct usage of PCLK prescaler. From Frank Benkert
2015-08-12 11:17:03 -06:00
Gregory Nutt
53638b10dc
SAMV7 USBHS device: Modify how ATTACH is performed if the use host has already reset
2015-08-12 11:13:18 -06:00
Gregory Nutt
68932c02d3
Fix typos in SAMV7 MCAN. From Frank Benkert
2015-08-12 08:17:50 -06:00
Gregory Nutt
2264c1fa64
SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled
2015-08-11 15:48:26 -06:00
Gregory Nutt
f3d1c19965
SAMV7 SPI slave: Loop in the interrupt handler; RDRF and TXNE events should occur very closely in time
2015-08-11 09:30:24 -06:00
Gregory Nutt
27733a6731
Trivial spacing change
2015-08-11 07:51:31 -06:00
Gregory Nutt
9f4e033f4c
MoxART: Trivial changes from code review
2015-08-10 11:05:09 -06:00
Gregory Nutt
8de9d3f014
Merged in rnouse/nuttx-arch (pull request #4 )
...
Add Shared IRQ support for UART w/multi port.
2015-08-10 10:11:43 -06:00
Gregory Nutt
c8c470271f
SAMV7 SPI Slave: Completes implementation basic, no-DMA driver
2015-08-10 10:05:00 -06:00
Anton D. Kachalov
f10b7ff09a
Merge branch 'master' of https://bitbucket.org/nuttx/arch
2015-08-10 18:14:49 +03:00
Anton D. Kachalov
46444388fa
Add Shared IRQ support for UART w/multi port.
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-10 18:13:35 +03:00
Gregory Nutt
c7b0a35e85
Rename sam_spi_slave_initialize to up_spi_slave_initialize for better symmety with the Master SPI interface definition
2015-08-09 17:41:55 -06:00
Gregory Nutt
ec68d00ed8
A few more cosmetic changes to the SAMV7 SPI slave driver-in-progress
2015-08-09 16:21:49 -06:00
Gregory Nutt
1fbd5351ff
Fix typo in a Kconfig file
2015-08-09 15:50:04 -06:00
Gregory Nutt
c7eaa00ed4
SAMV7 SPI slave: Add output queuing and interrupt handling
2015-08-09 15:42:32 -06:00
Gregory Nutt
5f4224115a
SAMV7 SPI Slave: Add a basic driver framework for SPI slave. Still a lot of missing logic
2015-08-09 12:04:43 -06:00
Gregory Nutt
7e7150899a
SAMV7: Add configuration options to select SPI slave (slave driver not yet committed)
2015-08-09 09:47:06 -06:00
Gregory Nutt
05aae51c89
SAMV7 MCAN: Lock the scheduler at one critical point to avoid a possible race condition
2015-08-09 08:41:57 -06:00
Gregory Nutt
7a6bdf286e
SAMV7 MCAN: Add some precautions to assue that a counting semaphore does not get out of synch
2015-08-08 08:38:52 -06:00
Gregory Nutt
a7a52252a8
SAMV7 MCAN: Fix DCACHE configuration dependency; Mkae sure DMA buffers are aligned to the cache line size at the end, Make RX FIFO1 the high priority FIFO and it it preference for RX input
2015-08-07 12:31:01 -06:00
Gregory Nutt
75ce247ed1
Use message sized defined in can.h
2015-08-07 09:01:30 -06:00
Gregory Nutt
aea94d9525
SAMV7 MCAN: Add support for all filter modes
2015-08-07 08:23:21 -06:00
Gregory Nutt
955202b895
Grr.. typos crept in during the last minute clean-up of the previous fix 8(
2015-08-06 12:50:11 -06:00
Gregory Nutt
32900bdb0b
SAMV71 MCAN: Fix standard ID mask
2015-08-06 12:47:14 -06:00
Gregory Nutt
f7bcff3d12
SAMV7 MCAN: Fix filter configuration when now filters are defined. We need to accept all messages in this case
2015-08-06 11:50:41 -06:00
Gregory Nutt
86f7a58954
SAMV7 MCAN: some fixes from early testing
2015-08-06 10:24:31 -06:00
Gregory Nutt
73a96ab078
Update some function headers
2015-08-05 16:22:10 -06:00
Gregory Nutt
983df071c3
STM32V7 MCAN: CAN FD mode depends on support from the upper half driver, so it is now global CAN configuration
2015-08-05 13:55:20 -06:00
Gregory Nutt
bb47c7f80e
SAMV7 MCAH: Add support for IOCTL commands that manage filters
2015-08-05 12:59:29 -06:00
Gregory Nutt
d824223736
SAMV7 MCAN: Fix uninialize configuration value
2015-08-05 09:16:16 -06:00
Gregory Nutt
ba23314cbf
Merge remote-tracking branch 'origin/master' into mcan
2015-08-05 08:57:29 -06:00
Gregory Nutt
f986d08515
SAMV71: Fix error in GPIO interrupt numbering
2015-08-05 08:57:05 -06:00
Gregory Nutt
4db9f276e6
SAMV7 MCAN: Fix some compilation errors when CAN debug is enabled
2015-08-05 08:21:32 -06:00
Gregory Nutt
92f5bf01c3
SAMV7 MCAN: Correct some compile errors when only MCAN1 is enabled
2015-08-05 08:07:25 -06:00
Gregory Nutt
1a93dadf26
SAMV7 MCAN: Fix some compilation warnings (some of which are real coding errors).
2015-08-05 07:29:20 -06:00
Gregory Nutt
c30cfe2025
SAMV7 MCAN driver is code complete (with some missing functionality)
2015-08-05 07:09:29 -06:00
Gregory Nutt
c8923bb6fc
SAMV7 MCAN: Finish some TX FIFO status methods; Correct interpretation of DLC in CAN_FD mode
2015-08-04 17:19:47 -06:00
Gregory Nutt
a64398c86b
SAMV7 MCAN: Minor correcting to message size calculation
2015-08-04 14:05:07 -06:00
Gregory Nutt
bb32aa8d24
SAMV7 MAN: Flesh out interrupt logic; add RX message handling logic
2015-08-04 13:51:34 -06:00
Gregory Nutt
62a9aed53a
SAMV7 MCAN: Add logic to send messages usign the TX FIFOQ
2015-08-04 11:41:38 -06:00
Anton D. Kachalov
a8fc587d87
Fixup operation mode set
...
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
2015-08-04 20:28:43 +03:00
Gregory Nutt
f7350568f3
STM32 ADC changes suggested by Max Kriegleder
2015-08-04 06:29:40 -06:00
Gregory Nutt
4e2a95c71e
SAMV7 MCAN: Add some default values of configuration settings
2015-08-03 19:21:43 -06:00
Gregory Nutt
949cea035c
Fix a spelling error
2015-08-03 13:53:53 -06:00
Gregory Nutt
e89d8c4a5f
SAMV7 MCAN: Remove SAMA5 kruft; beginning of some interrupt logic
2015-08-03 13:50:02 -06:00
Gregory Nutt
bf8230d7b4
SAMV7 MCAN: Update some register debug output
2015-08-03 10:02:18 -06:00
Gregory Nutt
d53f6b9353
SAMV7 MCAN: Finishes most of the initalization logic
2015-08-03 09:10:38 -06:00
